Thank you so much. If I use a mosfet? Like extruder slot (empty) can be ok?by zonalimitatore - Controllers
Hi at all. On this board how many mA can I request on ADC pins? For example,if I wanna put a rgb led stripe on adc1 adc2 and adc3,how many power can i request max without broke the board?by zonalimitatore - Controllers
UPDATE. Was a problem of board. I change it with new one,and now workby zonalimitatore - Firmware - Marlin
Hi guys. I buy this: I cant connect it due a different connector size My motor connector pin is more small and have 6 pin ( but only 4 is wired) How can i do for connect smoother to each motor? I've to create diy adapter? I try to unplug wires from original connector and insert it in the smoother connector,but the original have a too small holes,and "dance" insideby zonalimitatore - Stepper Motors, Servo Motors, DC Motors
No one can help me with this issue?by zonalimitatore - Firmware - Marlin
Seems to be solved.....Now don't give me -14C° on startby zonalimitatore - Firmware - Marlin
Maybe someone can explain this kind of strange issue... I try to mod in "sd fat config.h" the string // Set USE_SOFTWARE_SPI nonzero to ALWAYS use Software SPI. #define USE_SOFTWARE_SPI 0 <<<<< to 1 Now. -When i turn on the printer and insert the sd,nothing (no sd detection by printer) -If i inserit a usb cable, with printer off, connect to repetier,i can see list of file in myby zonalimitatore - Firmware - Marlin
It's normal that when I switch on the printer,give me -14C° on extruder? Bed give me 19(room temp) and early the same on bed Yesterday when I try and test give me the right temp. Today,work anyway,but start -14C° I don't know if this issue give a problem with the real extrusion tempby zonalimitatore - Firmware - Marlin
Well I did it!!! I have to edit and delete the string of old extruder and add a9 for temp sensor. Now work all Thanks for helpby zonalimitatore - Firmware - Marlin
Ok....This is my situation. I have to solder the 12 pin,cause the board haven't.... It's right like this? Now I've only to find the temp pin?by zonalimitatore - Firmware - Marlin
Yes...I try to swap the pin assignment,but temp sign -14° I search in motherboard's datasheet and assign relative pin,but still -14° I'm on 2.0 now,and I cant move estruder Little question....I've to swap the molex connector too or keep it in original place?by zonalimitatore - Firmware - Marlin
Hi guys. I have gt2560 rev.b and my original extruder slot stop work. I have 2 free slot for add extruders. What i have to mod in firmware for work on 2nd slot?by zonalimitatore - Firmware - Marlin
Today i change lcd2004 too....nothing to doby zonalimitatore - Firmware - Marlin
I've try to change the flat cable fcc 40pin....but nothingby zonalimitatore - Firmware - Marlin
Hi. I use repetier host to do command m21,I would have used cura. Anyway,the voltage was taken from inside pin of SD readerby zonalimitatore - Firmware - Marlin
I resold all pin of sd reader. Check all....nothing. Report my voltage The value next the first it's the read if have when init sd with repetier (sd insert) SD pin1 (DATA2) 3,14V SD pin2 (DATA3) 3,11V 0,18V SD pin3 (CMD/IO) 3,92V SD pin4 (GND) 0,12V 0,14V SD pin5 (VDD) 3,43V 3,45V SD pin6 (CLK) 0,12V 1,44V SD pin7 (GND) 0,12V 0,15V SD pin8 (DATA0) 0,12V 1,06 SD pin9 (DATA1) 0,14Vby zonalimitatore - Firmware - Marlin
Ok. I check,no debris in the slot. Now resolder all pin i've touch and control all with magnifer.by zonalimitatore - Firmware - Marlin
Where I can start?by zonalimitatore - Firmware - Marlin
Yes and the wiring doingby zonalimitatore - Firmware - Marlin
Yes i can try with different cards... I wanna say one things....like i saw in first post When i upload 1.1.9 from thinkiverse (runundfund if i find you ) with that cursed "firmware+bootloader" file,my print was death. I recovery by myself and since no one have do it on this board,i have write a guide on my blog. I don't know...maybe can be useful for know what i do,cause from that moment i uplby zonalimitatore - Firmware - Marlin
QuoteMrAlvin Has that SD-card worked before, on the printer? Yes Can you read the sd-card on your computer? Yes Is it formatted as FAT? Yes.i try fat 32,16,and do a low level format Is the SD-card 2Gb or bigger? Yes Can you wiggle the SD-card, to see if it gets a better position in the card-reader slot? I try in several position and do some,less,no pression.Try to wiggle the flat cable.Tby zonalimitatore - Firmware - Marlin
I've try the sketch. Nothing. Nothing on the screen In the serial monitor see this: Initializing SD card...initialization failed!by zonalimitatore - Firmware - Marlin
Thank you for explain. I know that the a10 config work because,it's official and many others user update with no problem (with .hex file) Soon try your sketch for eliminate the doubt. Thanksby zonalimitatore - Firmware - Marlin
Ok i understand. I know platform.io from 3 days,but is not easy like arduino. I know 2.0 can autobuild But..afterall.Why this versions of configuration.h (one with 1.1.9, one with 2 and original one) work on all other users,and not for me. Work,ok....bt not my sd reader. The only one difference is that i make the stupid things to upload 1.1.9 with bootloader file (included in .hex file),and i dby zonalimitatore - Firmware - Marlin
It's very long Arduino:1.8.6 (Windows 10), Scheda:"Arduino/Genuino Mega or Mega 2560, ATmega2560 (Mega 2560)" In file included from sketch\HAL.h:33:0, from sketch\MarlinConfig.h:39, from sketch\Marlin.h:35, from sketch\Marlin_main.cpp:252: pins_ULTIMAKER.h:112:33: error: pasting "/* PIN that has to be turned on right after start, to keepby zonalimitatore - Firmware - Marlin
Ok.But how can i mod the parameters and reupload if i've so much error in arduino ide? :Oby zonalimitatore - Firmware - Marlin
QuoteRoberts_Clif In A10 Configuration.h you are defining UltiPanel and Reprap Discount Smart Controller #define ULTIPANEL //the UltiPanel as on Thingiverse #define REPRAP_DISCOUNT_SMART_CONTROLLER In 1.1.9 Configuration.h you are defining Ultra_LCD and Reprap Discount Smart Controller #define REPRAP_DISCOUNT_SMART_CONTROLLER #define ULTRA_LCD I believe you need to select one or the other butby zonalimitatore - Firmware - Marlin
QuoteMMcLure Try the fix described in https://github.com/MarlinFirmware/Marlin/issues/11788. Ok.I try to mod the file but how can i build? I mean,in arduino ide tell me a lot of errors I try with ide 1.0.1 sameby zonalimitatore - Firmware - Marlin
Thank you.Tomorrow try this.by zonalimitatore - Firmware - Marlin
this is from 1.1.9 marlin by thingiverse this is from 2.0.x marlin by thingiverse redangel1984 this is from original a10 firmware I cant go out this problem....original firm,still not workingby zonalimitatore - Firmware - Marlin