Hi I have started our project to build ( huge) 3d printer We chose RA controller to control huge size of printer With dimensions 50*50*50 cm for object(model) that we will print it I'm the one who have to chose the stepper motor But unfortunately I'm do not know how to chose a stepper motor I build reprap printer with NEMA 17 motor ( which is came with the kit ) But when i search forby Omar991 - Stepper Motors, Servo Motors, DC Motors
sorry guys my dsl line was down for a week i want to change the logo in left side of this pic to g code to print it in my printer (3d styffmaker) using sli3erby Omar991 - Slic3r
i open your stl file in Slic3er but i can not got the same shape + i have error lik in pics after i click ok i expoet the g code but i got the error massege then i open prontorface and load your stl file i got this fillaly i opened the g code that i got it from stl file ( with error) and i got thisby Omar991 - Slic3r
i want 2 shape to change it in stl files to print it i download a stl file but still i has error in sli3cer i should summit it tomorrow (( if any body can help or can give a site that can help me even if i pay to them moneyby Omar991 - Slic3r
QuoteQuackingPlums There were multiple items in your .skp file. I'm guessing you want the 2D 'flat' version of it like this?: i try to open it in pronterface it shows as one small object i want to print it in 1.5 cm high 15*15 cm length and widthby Omar991 - Slic3r
Quotedmould The G-code will depend on the slicer setting required by your particular printer, so it is not possible to create a g-code file for you without knowing what settings your printer needs. It sounds like you need to rotate the part to get the correct surface flat onto the bed. I am not familiar with Sketchup, but I expect it will allow you to rotate the part. If not you can export anby Omar991 - Slic3r
Hi guys i have a 3d design on sketchup file that i attached and i want to convert it to STL file OR G-code file to print it by pronterface i try to convert the design by sketchup but still pronterface can not open it or it convert but in different shape can any body give the STL file Or G-code ( after converting) that make the design in horizontal shape to let me print it in plate theby Omar991 - Reprappers
Hi guys i have a 3d design on sketchup file that i attached and i want to convert it to STL file OR G-code file to print it by pronterface i try to convert the design by sketchup but still pronterface can not open it or it convert but in different shape can any body give the STL file Or G-code ( after converting) that make the design in horizontal shape to let me print it in plate tby Omar991 - Slic3r
I have the same problem Can any one help pleaseby Omar991 - Reprappers
I notice it does not move (z axis) it print 2nd layer over 1st layer without any space , also the shape deform and begin print another form I use Slic3r website is version 1.0.0 BTY After i upload firmware to melzi I did not change the z offset, and z hight If any one can explan it in details pleaseby Omar991 - Reprappers
Hi guys ,, i just finsh my 3d printer menel ... and i start printing but when it finsh the 1st layer z axis does not move up ،،Although the axis move normally up and down before start printing ,, in other hand the speed of printing is so slow compare with that videos i see it in youtube can any help me , pleaseby Omar991 - Reprappers
Hi guys This my first reprap Mendel After i finish all mechanical part I install slave controller And connect all wires in its place I start with software I setup sli3er and pronterface Then i setup the five python file to my windows 7 Then i open the sli3er and choose the usb port after that i click on " connect " ,few second it show me " reprappro slave controller restarted " Thenby Omar991 - Slic3r
Hi guys This my first reprap Mendel After i finish all mechanical part I install slave controller And connect all wires in its place I start with software I setup sli3er and pronterface Then i setup the five python file to my windows 7 Then i open the sli3er and choose the usb port after that i click on " connect " ,few second it show me " reprappro slave controller restarted " Thenby Omar991 - General Mendel Topics
I did exactly the same as #6 .. nothing is shown up till now.by Omar991 - Reprappers
when I connected the printer with the pronterface, it says " reprappro slave controller restarted". I din't know how to fix it. could anyone help me please.by Omar991 - Reprappers
from reprappro, they're labelled but after I tried the single colour board and it is not working I said maybe it's the same as tricolour's.by Omar991 - Reprappers
Hi guys,, am working on reprappro mendel, I tried so many times to install the Melzi Processor and it won't work am wondering if I can use the Processor of Mendel Tricolour..? Here is a pic of the processor of single colour ( the one with the red jumper ) and tricolour ( the other one ) I hope to get your interaction as soon as possible, because am stuck in here. thanks in advanced.by Omar991 - Reprappers
it worked about 1 Min before it shut down. do they have a contact number? because I couldn't find !!!by Omar991 - Reprappers
61 views and no body can help pleeeeeease am stuck in hereby Omar991 - Reprappers
Hi guys This is my 1st building for reprap mendel that i got it from reprappri.com I am stuck in installing melzi processes When i connect it to the usb port to test it It work for 1 Min then it doesn't work Is there any software can help to start Or any other way Can you give me please Thinksby Omar991 - Reprappers
This pic for resistor i talk about Sorry my 1st account desnt workby Omar991 - Reprappers