Its the windows driver which are faulty. Connected me "old" thinkpad instead of my Surface pro 8 and it get an easy connection.by kakawuwu - Firmware - Marlin
did you got it running? having the same problem. I dont know how to change it in order to connect directly to the board. my TFT 35 get connected and i can controll the system via display but can not get a connection via win10by kakawuwu - Firmware - Marlin
I modified an Makerbot replicaotr 1 dual extrusion with an MKS GEn1.4 and Marlin 1.1.4. I mounted an Syringe extruder on the left (2nd) exturder position where i need to extrude with temp around 25-30°C. Thus i would like to make the cold extrusion prevention eather adaptable for each extruder or disable it for only the 2nd extruder. I have read about the M302 command however i wanted to know ifby kakawuwu - Firmware - mainstream and related support
Thanks that is a good advise. The torque is dependent von the chipwheel /cog size. thus a smaler wheel could increase the torque while having a redurced current?!by kakawuwu - General
i dont get it. I replaced the mainboard from a makerbot replicator 1. I keep using the 24V with new DRV8825 driver . The vref for the extruder is set at 0.3V so its below the accaptable 0.4V (0.8A per coil are allowed for the stepper... ). However the motor gets really hot! I am useing Marlin 1.1.4 any suggestions ? i really hope i dont need to add an extra fan... .by kakawuwu - General
Hi hast du es geschafft? Wieviel Amp schickst du auf die Motoren (bzw auf die y,x und Extruder als acuh den Z motor. Laut Moons schafft der Z motor ja nur 0.4A perCoil. und die Anderen 0.83A pro coil.by kakawuwu - Allgemeines
be any chance u found it ? i have searched now for 4-6 h and just cant find the datasheet with any informaitons about the stepper (most important would be the A... ) And no google does not provide any help.. .nor does Moons. ok i have been now in some russian web site (thanks google translate!!!) and found following information form this site Manufacturer: Moons Motors 200 steps per revolutioby kakawuwu - Mechanics