Have you changed the Mac address on one of them to be different from the other? Dougby dougal1957 - Duet
QuoteCalvinx66 Thanks for the reply. Alas It wouldn't economic make sense to buy the non wifi board from the link advertised as it is the exact same price for an older generation board as the new one. You would have thought with the new board being released that the previous version would have been discounted somewhat. So again I ask anyone got any ideas on an EU alternative ? have seen Milkshby dougal1957 - Duet
Quoteaussiephil Quotedougal1957 Re Titan Extruder Pleased to report that the New Hobb/Drive Gear has fixed the issue and I am Now very happy with it. Doug Any chance of grabbing the issues, I've searched but can't find any details and despite my Titan seeming to be fine I'd like to know what to look for Cheers Phil Phil check out Titan extruder not extruding correctly about 1/2 way down pg 3by dougal1957 - Duet
Re Titan Extruder Pleased to report that the New Hobb/Drive Gear has fixed the issue and I am Now very happy with it. Dougby dougal1957 - Duet
You don't really need to find which tower is connected to the Z Driver on your Board and set that as the back then have the opposite side will be the X and Y towers if you look down on it from above the motor sequense (Towers) goes X - Y - Z in an anti Clockwise direction?by dougal1957 - Delta Machines
Quotercrocket1 I keep printing a key chain with a word on it and its mirrored on the x axis. I tried to look up solutions from other posts and kept ending up wrong. I do not know what next step to take! All advice is helpful. Check your motors are set to the correct drivers the Rear tower is Z the front right Should be X and the front right Should be Y. I suspect you have the X and Y crossed (Mby dougal1957 - Delta Machines
My 2 Cents Forest are Depending on size of printer? I would say upto say 500 horizontal's and 1000 verticals then the Robotdigg corners are the easiest option but as Dave says they are not the Cheapest around (Robltdigg also do a set of Alloy Carriages and an Alloy Effector to match them) I think the Corners are around $55 dollars a set plus the cost of some bearing for one to suit 20x20 extruby dougal1957 - Delta Machines
David could the Missnaming of the Printername in the orig Config.g (The P at the start of the name was missing) cause this effect? Dougby dougal1957 - Duet
Quotebme The nozzle is 1 mm in diameter. I drilled a hole in a 0.4 mm nozzle. Not so big precision but it works for some tests. In that Case I would suggest that you shouldn't try to go above 0.8 layer hight The normal rule of thumb is no more than 80% of Nozzle Diameter? Doug p.s. If you really want to print big like that think aboudt an E3D Volcano which has a longer melt zone and Nozzleby dougal1957 - Reprappers
Quotebme @bme: again, sorry to hijack your thread. No problem at all! I work more with mechanical design like now some tests with 0.8 mm layer height. It is very difficult to cool such amount of PLA. What size Nozzle is thatby dougal1957 - Reprappers
QuoteT3P3 Indeed fingers crossed for tomorrow FPex Luckly if the worst happens we will have at least two years before the drawbridge is pulled up! Although If the worst does Happen I can see the Pound taking a big hit as well so the Exchange rate will alter considerably. Not relishing that prospect at All. Dougby dougal1957 - Duet
Quotedc42 The T, R, B, H and L parameters are irrelevant when using a thermocouple or PT100. It doesn't matter which way round you connect a PT100 because it s basically just a very accurate resistor with a known temperature coefficient. Assuming you have only one daughter board fitted, the X parameter for the first PT100 should be 200. For a thermocouple board it would be 100. See for a littleby dougal1957 - Duet
David When using a PT100 sensor for the Hotend would my M305 be as follows (Assuming using the first port on the RTD Board) M305 P1 T100000 R4700 B4200 H0 L0 X100 Not sure about the T And R Terms (Suspect that they are not used) also the X term does the first port on the PT100 board default to Ch 100 or could it be 102 assuming that the Thermocouple board also uses 2 channels). Also is the PTby dougal1957 - Duet
Certainly will however it will have to be after I have got The DuetWIFI Installed and tested as there is a certain Time constraint on me to do that before Vacation time. Doug.by dougal1957 - Duet
QuoteFpex The narrow hobb is a faulty one , this is what i just learnt. Thanks for that just emailed them a pic of my hob and a new one has already been shipped out to me. Less than 1 hour start to finish so fairly impressed (If it fixes the issue?). Dougby dougal1957 - Duet
QuoteFpex My opinion of the titan might change, I just discovered mine are defected by birth ... looks like they need replacing. Waiting for e3d to confirm it or not. Also I follow david advice. For the extruder I use a thinner motor with less torque. What problem do you have wonder if mine might be the same I believe that there are 2 different Hobbs that have been produced mine appears to be aby dougal1957 - Duet
Quoteaussiephil Quotedougal1957 I Would Echo the concerns with the Titan I put one on My delta and struggled with it to get a decent print without jamming/Stripping. Went back to the original Mendel Mini extruder and issues disappeared I think the issue came down to the Length of the Bowden Tube (Mine is 800 mm long). I think as the pressure builds up and the friction of the tube is just to muchby dougal1957 - Duet
I Would Echo the concerns with the Titan I put one on My delta and struggled with it to get a decent print without jamming/Stripping. Went back to the original Mendel Mini extruder and issues disappeared I think the issue came down to the Length of the Bowden Tube (Mine is 800 mm long). I think as the pressure builds up and the friction of the tube is just to much for the Titan to cope with it sby dougal1957 - Duet
David/Roland/Tony Excellent Work guys Can't wait to get my hands on one to try (Eagerly waiting for the Paypal Invoice) Hope it all goes well for you all you deserve the success Dougby dougal1957 - Duet
Quoteralex Hi. Can someone help me about this questions? Thanks a lot! 1) I finally got a Kossel 25000 Metal Bracket Kit. This material is enought ? 3x 750mm 2040 V-Slot Rails 9x 360mm 2020 V-Slot Rails Or i have to buy 12x 360mm 2020 V-Slot Rails? 2) To mount the Kossel 25000 Metal Bracket Kit, can i follow this guide? Manual 3) And about the motor, is these a good choice? Motor You wilby dougal1957 - Delta Machines
Quotedrmaestro Quotezylantha Quoteanimoose Hi, can anyone tell me if the motor and endstop connectors on the SBASE are physically and electrically the same as those on a RAMPS 1.4? That is, can i just unplug the cables from my RAMPS, plug them into the MKS SBASE and have it work? Or will I need to put different connectors or reorder the pins on the existing cables? While they are electrically eqby dougal1957 - Controllers
Quotedeckingman Quoteaussiephil Surprised that the video hasn't raised questions or comments in general. I'm not. If it'd been a pile of crap you'd have had plenty of comments. As there is nothing to criticise, there are no comments. Take it as a compliment. (Sorry, that's just an old man getting more cynical every day). I'll second that thought as well? Dougby dougal1957 - Delta Machines
Quotedmould Quotedougal1957 Quotedmould Just ordered this to stick it on with, though I cannot find any temperature information, so I'll have to find out how well it is going to survive ABS bed temperatures! Dave Dave go to Stickytapes.com web site and look for 3m8153 use discount code sticky25 for a 25% discount 8153 is a step or 2 up from 468 which is up from 467. Be warned it is gossamerby dougal1957 - Ormerod
Quotedmould Just ordered this to stick it on with, though I cannot find any temperature information, so I'll have to find out how well it is going to survive ABS bed temperatures! Dave Dave go to Stickytapes.com web site and look for 3m8153 use discount code sticky25 for a 25% discount 8153 is a step or 2 up from 468 which is up from 467. Be warned it is gossamer thin and sticks like the proby dougal1957 - Ormerod
My Printbite is now Probably 3 months old and as I say I have had no issues with it however in is stuck directly to a 6mm Thick piece of Alluminium Machine Cast tooling plate so is perfectly flat and stable. Pei can be obtained in quite thick pieces and I got some from Amazon.Com (USA) for about 16$ us I think it was for a 305x305 sheet that is 0.8 mm thick so is quite durable but that was the lby dougal1957 - Ormerod
Quoteaussiephil Highly recommend these guys If they don't have what you want they will make it I installed a 1200W 500mm one under the 600mm x 8mm ATP5 cast plate Lesson from that...... make the pad nearly the same size as the bed to remove cool edges, I'm considering ordering a 600mm round one now Oh I have no real issue with the thermistor in mine..... I consistently see a simple 5 degreeby dougal1957 - Delta Machines
Quotedmould QuoteTreito So especially for dmould take a look here: Thanks. Unfortunately I am still waiting for my PrintBite to arrive. I hope it's not another fly-by-night company. Dave Dave I have been using Printbite for some time now with a 380mm Diam Delta and have had absolutely no issues with it at all However you do need to apply it to the Bed with the Correct Adhesive product someby dougal1957 - Ormerod
Quotedc42 Try Motedis, that's who I bought my extrusions from. Second that and they are based in Southern Germany (Black Forest area I believe) They will cut to size free www.motedis.com Dougby dougal1957 - Delta Machines
I can Vouch for this supplier in fact he is the Manufacturer of the 25K Brackets mine arrived in 5 days once they Shipped. Glenn (From NCC) is the only person you can get them from Currently if you are outside of the USA/Canada. Dougby dougal1957 - Delta Machines
I am getting around the 899-960 mark using a Sandisk 8Gb card Class 10 (from Tescos) on a 22.7 Mb file on a 0.6 board. It has more than doubled the upload speed I was seeing with 1.09r which was the last version I had been using now on 1.12a. Very impressed keep up the good work David?? Easily hitting the 950 Kib mark just take an ocasional Glitch which drops it down to the 880 sort of mark buby dougal1957 - Duet