Yes unless you have access to the CAD drawing then you will have to do it at the slicing level. Skeinforge does it quite wellby NelsonRap - General
so this is a hollow cube? Will anyone ever be able to see the inside? Bridging can do it depending on the size and if you can't see in then some droopy inner layers won't matterby NelsonRap - General
So far the only colour that gave me trouble was a roll of dark green, every other colour has been fine. I haven't tried another roll of that green since so don't know if it was a one off. I only buy from the source you are using and have used 600m of red 300m purple, 300m dark blue that I know of so far with no problems. So it could be a simple bad rollby NelsonRap - New Zealand RepRap User Group
Some PSU's have a thermal cutout which kicks in whenit becomes a bit overloaded, I had this with some cheap 350W ones I had lying around so bought this 400W one here and these work as they don't have the internal cutout controllerby NelsonRap - General
I could never get tape to stick during prints it always lifted along the joins which is why I went to heated glassby NelsonRap - New Zealand RepRap User Group
Arriving Chch Thursday evening, have to look for rental houses on Friday so that the family can follow, start work next Tuesday Mitre10 Mega Ferrymeadby NelsonRap - New Zealand RepRap User Group
The nozzle should be off the bed by about 2 thickness's of printer paperby NelsonRap - New Zealand RepRap User Group
Why not get the rod locally 8mm rod is available quite cheap from places such as tata steel, they are in Nelson and Christchurch it's where I goby NelsonRap - New Zealand RepRap User Group
There are companies where for a small fee you ship to them in the states and they on send, can't remember the name of one I have used before at the moment let me think on it a whileby NelsonRap - New Zealand RepRap User Group
Yes next week I think as I start my new job on August 14by NelsonRap - New Zealand RepRap User Group
I use SF41 the old version and it's times are out qiute a bit so I build in an error calculation of 15% and then it's about right for time. I just do this with a calculator afterwardsby NelsonRap - General
I work on NZ$5 an hour for my machine cost + material+ any design work I do at the normal rate of $25/hourby NelsonRap - General
Sorry Reece, I met you last time in Nelson but I'm in the middle of moving to Christchurch as there is no work here in Nelson. Trying to change career in the middle of a recession is hard enough even harder when your about to turn 45, I have work lined in in Christchurch so the move is imminentby NelsonRap - New Zealand RepRap User Group
I'm upgrading to run off SD cardby NelsonRap - New Zealand RepRap User Group
I'm moving from Nelson to Christchurch too. Will be living there from September, and in town all this week, about to leave to drive down as have job interview tomorrowby NelsonRap - New Zealand RepRap User Group
Apparently acetone works on ABS but not tried it on PLAby NelsonRap - New Zealand RepRap User Group
I was running perfectly off an old desktop with XP, that died and because of the form factor I couldn't get spares to fit. Switched to a netbook running Win 7 and have all sorts of problems that it seems might be cauesed by the charger, so in the middle of switching to SD card printing. Also in the middle of moving house/town so no real spare time to play with my RepRap at the momentby NelsonRap - Reprappers
Nope I swap them at the end of a print as they need to cool before the prints will lift off Weedz Wrote: ------------------------------------------------------- > you have 2 pieces of glass on top of them ? > > so the tickness has resulted in the cracking? also > i remember that the back side was painted so that > could prolly cause it... > so 3mm will not brake that fastby NelsonRap - General
I have been using the same 2 pieces of 3mm picture glass for over a year and printed at least 50 sets of Prusa parts on themby NelsonRap - General
I make my alu beds 225 square but the nozzle can't get right to the edges so you would be ok with 200x200 and just hold it on with buldog clips. I use 3mm picture frame glass only because I had some hanging aroundby NelsonRap - New Zealand RepRap User Group
I clean my glass with methylated spirit but I do it when the glass is hot, get no residue and PLA just sticksby NelsonRap - Reprappers
You could try turning the post up it doesn't need muchby NelsonRap - Reprappers
You might need to turn up the pots on the driver chips fractionallyby NelsonRap - Reprappers
Probably more likely ABS would be better than PLA as PLA needs much less heat to get soft. At those speeds I would expect heating of the gears to take place potentially causing them to fail or warpby NelsonRap - General
sounds like a dodgy driver chipby NelsonRap - Reprappers
I think you can run pretty much the same electronics on all types. I have an original Mendel running Gen6 and I'm about to convert it to Sanguino so that I can print from SD card. Sanguino works very well on Prusa tooby NelsonRap - New Zealand RepRap User Group
I have a copy but can't remember where I got it from, if you pm me I can send you the .stl file although mine is a Greg's not a Wade'sby NelsonRap - General
Ah forgot that as we have an account with them so still get free delivery Agent24 Wrote: ------------------------------------------------------- > NelsonRap Wrote: > -------------------------------------------------- > ----- > > Element 14 very quick delivery just look them > up > > But delivery is $15 unless you buy over about $45 > worth of stuffby NelsonRap - New Zealand RepRap User Group
A prusa is nice and simple and what most people are now building so there should be lots of parts around for themby NelsonRap - New Zealand RepRap User Group
Element 14 very quick delivery just look them upby NelsonRap - New Zealand RepRap User Group