Nur dein Slicer Programm kann dir diese Information geben.by rhmorrison - Software
stepper controller possibly overheating. Add a fan or turn down the current.by rhmorrison - General Mendel Topics
Please don't double post!by rhmorrison - Printing
Dateien anhängen.by rhmorrison - Allgemeines
Ist ein Lufter angeschlossen? Wenn nicht, der Teil sieht ziemlich klein aus - es konnte eine hitze Problem sein! Versuch mal 4 stuck auf einmal zu drucken.by rhmorrison - Allgemeines
In Skeinforge : Craft - Dimension must be activated!by rhmorrison - General
$fn = 100; t = 5; td = 20; bd = 15; h = 30 - t/2 - sqrt(2)*t/2; difference() { cylinder(r1=bd, r2=td, h=h, center=true); cylinder(r1=bd-t, r2=td-t, h=h+0.01, center=true); } translate([0,0,h/2]) color("green") torus(td, t/2, h); translate([0,0,-h/2]) color("blue") tearus(bd, t/2, h); module torus(d, r, h) { rotate_extrude() { translate()by rhmorrison - OpenSCAD
QuoteQuackingPlums Isn't that what I did Bob? ;-) YES, in fact - you DID (but I forgot it in my first post)! Quoteappjaws1 I assume that a teardrop is constructed from a cube and a cylinder YES, or a circle and a rotated square that is created with rotate_extrude() or linear_extrude().by rhmorrison - OpenSCAD
BTW in the last post I didn't show the answer to: Quoteappjaws1 whilst maintaining the overall height of say 30? The two torus both have a radius of t/2 so together that is a height ot t (5 mm in your example) so instead of h = 30; use: h = 30 - t;by rhmorrison - OpenSCAD
$fn = 100; t = 5; td = 20; bd = 15; h = 30; difference() { cylinder(r1=bd, r2=td, h=h, center=true); cylinder(r1=bd-t, r2=td-t, h=h+0.01, center=true); } translate([0,0,h/2]) color("green") torus(td, t/2, h); translate([0,0,-h/2]) color("blue") torus(bd, t/2, h); module torus(d, r, h) { rotate_extrude() { translate() circle(r = r);by rhmorrison - OpenSCAD
HERE is the fixed file which I was able to slice properly using the newest Slic3r Version.by rhmorrison - Slic3r
Your STL file has problems. Use the netfabb Model Repair Service to fix it, then slice it again with Slic3r.by rhmorrison - Slic3r
Ich vermüte auch das du die 24v modelle bekommen hast. In deine Rechung (oder email) von E3D soll "v6 HotEnd Full Kit - 1.75mm Universal (with Bowden add-on) (12v)" oder ähnliches drin stehen. Wenn statt (12v) steht (24v) denn weist du Bescheid. Aber egal was Bestellt war - mess die Wiederstand der Heizstab mit ein multimeter.by rhmorrison - Extruder, Hotends & verschiedene Materialien
Stimmt nicht! Nophead hat bei seine nur ein Z-Max installiert. Denn muss man genau wie bei eine Delta die FW sagen die entfernung von Z-Max zum Tisch. Vorteil ist das HOME immer eine sichere position ist (genau wie beim Delta).by rhmorrison - Allgemeines
Tcha - den... Nutzte ein photo dienst OHNE popup Werbung wie Picassa (jetzt Google Plus Photos)!by rhmorrison - Allgemeines
Was ist umstädlich? 1. Datei anhängen klicken 2. Browse... klicken 3. Datei auswählen 4. Open klicken. 5. anhängen klicken 6. Link in die Nachricht einfügen klicken! O.K. - Zugegeben, Drag und Drop von Windows Explorer wäre viel schneller aber die sechs schritten sind schnell gemacht und verhindern das jede leser zu ein fremde website mit #!!##$@ Werbung gehen muss. Ich tue das mir nicht meby rhmorrison - Allgemeines
For the current Marlin in Configuration.h // #define ULTRA_LCD //any lcd #define LCD_WIDTH 16 #define LCD_HEIGHT 2 //#define ULTIPANEL #ifdef ULTIPANEL #define NEWPANEL //enable this if you have a click-encoder panel #define SDSUPPORT #define ULTRA_LCD #define LCD_WIDTH 20 #define LCD_HEIGHT 4 #endif Simply uncomment the "#define ULTIPANEL". #define ULTIPANEL Otherwise see: RepRapDisby rhmorrison - New Zealand RepRap User Group
QuoteWurstnase Auf diese ganzen externen Bilder klicke ich nicht mehr. Da kommt meist zuviel Mist. Ich auch nicht! WERBUNG und scheiß neue Fenstern. Wenn Sie ein Bild nicht im forum hochladen kann denn schau ich es nicht an!by rhmorrison - Allgemeines
Where have you set the baudrates? One is in your firmware, the other in either Repetier (or Pronterface). Only one device can use a COM port (Virtual in this case) at one time, have you closed the Arduino software?by rhmorrison - General New Machines Topics
Walter White would however only make it as blue transparent.by rhmorrison - General
You can get the Smart LCD Controller and the Smart LCD Controller XXL from Reprapdiscount.by rhmorrison - Wanted
Sowas kann mann nur mit support drucken.by rhmorrison - Projekte
Could it be that your HW is setup to use power from the USB? QuoteRAMPS V1.4 article in RepRap wiki Power Supply Where to find the D1 diode (note that D2 is shown at the left, not D1) RAMPS is quite happy with the 12 V line from PCPowerSupply. Or you can hack up a 12V laptop power supply, or other 12 V "wall wart" power supply. Be sure that the power can output 5A or greater. Additional 11A maby rhmorrison - General
Have you ever heard of Google?by rhmorrison - General
You are trying to move the Z-axis too fast! Try 1 to 3 mm/s (60 to 180 mm/m).by rhmorrison - General Mendel Topics
Es sieht aus wie ein slicer problem. Ich hab Skeinforge.50 benutzt, 32 mm/sby rhmorrison - Allgemeines
Practice: Split Solidby rhmorrison - 3D Design tools
See the Building my Delta Printer article in the blog from Andreas Hölldorfer. P.S.: Also take a look at his current 3D printable Robot Arm project.by rhmorrison - Delta Machines
The filament holder looks familiar!by rhmorrison - General Mendel Topics