RepRap Machines
English • العربية • български • català • čeština • Deutsch • Ελληνικά • español • فارسی • français • hrvatski • magyar • italiano • română • 日本語 • 한국어 • lietuvių • Nederlands • norsk • polski • português • русский • Türkçe • українська • 中文(中国大陆) • 中文(台灣) • עברית • azərbaycanca • |
About | Getting Started | RepRap Projects | Hardware | Software | Community
A large number of RepRap models have been created for different purposes. They generally fall into two common design categories; the traditional Cartesian design, which involves an X, Y and Z axis, and the Delta design, which is where the printing head is suspended from three arms over the print bed.
Both designs have their merits, and a large number of models exist for both.
Below are some of the most common printers that are available.
3D Printers
Prusa Mendel (license: GPL)
Mendel Rostock (license: GPL)
P3Steel (license: CC-BY-NC-SA)
Molestock (license: CC-BY-NC-SA)
RepRap Morgan (license: GPL)
Tantillus R (license: GPL)
Cartesio (license: CC-BY-NC-SA)
RepRapPro Mendel (license: GPL)
RepRapPro Huxley (license: GPL)
Eventorbot (license: CC-BY-SA)
Prusa i3 Rework (license: GPL)
MendelMax 2.0 (license: GPL)
Smartrap mini (license: GPL)
Kiwi remix (license: GPL)
Prusa i3 Hephestos (license: GPL)
WoodMAX_i3 (license: GPL)
i3xl printer (license: GPL)
Micro Delta (license: CC-BY-NC-SA)
Prusa Snowden (license: CC-BY-NC-SA)
HardyGraph (license: GPL)
Sigma3D (license: CC-BY-NC-SA)
SpatialOne (license: CC-BY-NC-SA)
RepRap Intro (license: GPLv2)
Tripteron (license: CC-BY-NC-SA)
Blocks zero (license: GPL)
Q3d (license: CC BY-NC-ND 4.0)
Qubit3D (license: CC BY-NC-ND 4.0)
Deltacomb 3D (license: CC-BY-NC)
CoreC (license: CC BY-NC-ND 4.0)
Milling/Router Machines
Cartesio (license: CC-BY-NC-SA)
MaduixaCNC (license: GPL)
Robotic Platforms
RepArm mk1 (license: GPL)