Yes, that's what they are used for - to insure that +12V is +12V.by rhmorrison - General
Die border war zweimal drin. Die neue "DxfToSign.awk" hat es nur einmal drin wie es sein soll (angehängt). GNU AWK - gawk V4.1.0 für Windows kann man HIER downloaden.by rhmorrison - Software
Hier meine erste versuch mit AWK (mit GNU Awk 4.1.0). Aufruf: gawk -f DxfToScad.awk NAME.dxf > OUTPUT.scad In diesem Fall: "gawk -f DxfToScad.awk Markus.dxf > MarkusOut.scad" Denn "MarksOut.scad" öffnen mit OpenSCAD und F5 drucken. textZ, plateBorder und plateZ variablen kann wie erwünscht geändert werden. Schicke Beispiele und ich kann es weiter verbessern.by rhmorrison - Software
Kannst du ein handvoll von Beispiel DXF-Dateien hoch laden?by rhmorrison - Software
Leider er will keinen umris von der text, er will ein Viereck von die richtige große. So weit ich weiss gibt es in OpenSCAD keine Möglichkeit an diese information dran zu kommen! Man konnte vielleicht ein Program dafür schreiben: DXFtoSign das die DXF-Datei einließt und ein .scad datei erzeugt mit die richtige Viereck. Ich versuche mal damit rum zu spielen - es konnte sogar mit ein script spracheby rhmorrison - Software
Solche brucken kann mann verbessern mit: Schneller druck geschwindlichkeit (beim brucken) Ein Lufter auf der gedruckte objektby rhmorrison - Allgemeines
Zuerst schau mal die Inkscape to OpenSCAD converter an auf Thingiverse.by rhmorrison - Software
Du solltest prufen wie viel ohm du mißt wenn du die schwarz und rot proben kurzschliessen. z.B. wenn du ließt 0,6 ohm denn muss du das abziehen von der 1,1 ohm was 0,5 ohm bedeutet. Ideal soll deine multimeter 0,0 ohm zeigen wenn die probes direct verbunden sind (schwarz <=> rot).by rhmorrison - Elektrik & Elektronik
Mit Smartphone geht es!by rhmorrison - Kommerzielle Angebote & Produktvorstellungen
by rhmorrison - Kommerzielle Angebote & Produktvorstellungen
Wir kommen auf die homepage, nur keine von die links zum Produkten functioniern!by rhmorrison - Kommerzielle Angebote & Produktvorstellungen
QuotePhilipp Ich glaube jetzt sollten die Links besser funktionieren. Nicht wirklich!by rhmorrison - Kommerzielle Angebote & Produktvorstellungen
Wie ist deine slicer eingestellt? Mit der FW setzt du nur die maximum Geschwindlichkeit und Beschleunigung, mit der Slicer was er wirklich benutzen soll!by rhmorrison - Elektrik & Elektronik
You might try raising the hotend temperature to 210°C. J-Head don't usually have overheating problems! Do you have a fan?by rhmorrison - Printing
High Temp PLA Proto-Pasta High Temperature PLAby rhmorrison - Allgemeines
Der schaf hat ein riesen hohlräume für Salz/Pfeffer! Du kannst ruhig mit 30% fill drucken, sogar 100% werde gehen.by rhmorrison - Allgemeines
It is a "Virtual" COM port! You set the baudrate in the firmware AND the Host program - NOT the device manager!by rhmorrison - Printing
Ja, Ja und potentiometer an schrittmotortreiber einstellen damit mehr/wenig strom fliessen kann.by rhmorrison - Elektrik & Elektronik
For something relatively simple such as a flange I would use my CAD program of choice, measure the original item and create a 'real' CAD model. For more complex geometries I would probably try the scan and edit process that you are currently using.by rhmorrison - 3D Scanners, Book Scanners, and Optics
You can use netfabb Basic to slice an STL file into parts (and for a lot of other useful functions).by rhmorrison - Experimental
Based on the pictures I would guess too fast and not enough plastic being exturded.by rhmorrison - Printing
hex wrench? Get a proper tool allen head screwdriver set! Socket (allen) head screws are used because you do not need to apply pressure to turn the screw as you do with flat head or philips head screws.by rhmorrison - General Mendel Topics
You might get more help if you would attach attachments as such instead of including them in the text making for a post that goes on for pages!by rhmorrison - Prusa i3 and variants
No, normally you can NOT use 3mm and 1.75mm on the same hot end. If the inner diameter of the tube is ~2mm then it is for 1.75mm filament. But if the heating chamber is made for 3mm filament then you can still have a clogging problem.by rhmorrison - Printing
Quoteubit Hatte ich bewusst nicht geschrieben, weil das ein Link auf eine kommerzielle Seite ist den man mit Google ganz einfach selbst hätte finden können *g* Na klar, lieber 1000 Leute mit Google suchen lassen anstatt die URL die der Erfasser schon bekannt ist als link zu posten...by rhmorrison - Projekte