Hji fellow Protos V3 owners , sorry I can only write in English as my german writing is not good ! I wonder if anybody out there has the V3 Protos firmware that I could download , as I dont seem to be able to find it by German RepRap where I bought it . Other wise the printer has been ok , after many improvements and upgrades . Hope you can help me , stay safe and healthy all the best Harryby zurferjoe - Allgemeines
Ok sorted my own problem ! Its a Windows 10 thing ! Cant go on internet when Im printing !!by zurferjoe - Repetier
Hi there , anyone got the diagram for the Arduino board 1.4 ramps to install a Mosfet on it ?by zurferjoe - RAMPS Electronics
Ok Im back again! The printer stops moves over to the left or right sometimes straight on and start all over again ! And stops at 22mm height everytime,the object height is 50mm when if ever it gets there !! And then stops and starts to build another 22mm high object ! Any ideas please !by zurferjoe - Repetier
Thank you again Dust !" Im back printing again ! Have a learned a lot from you and the tips and advice where top , all the best Harryby zurferjoe - Repetier
Ok its me again ! Only top say the def was due to Microsoft update and shut it all down ! hence stop printing ! Easy when you know why ! So back to making my casting forms for motorcycle frame Im replicating from the 20s. Thanks again Harryby zurferjoe - Repetier
Ok its not ok !!! Running sweet now its "def" !!! Will try running on sd card , it seems its going offline and stopping it all :by zurferjoe - Repetier
Ok Dust ! Ive got it ! I think , got Repeiter on Arduino 1.0.1 ,fired up Pronterface on 9600 buad , showed me all three thermistors working . Put it all back together with a bare ramps 1.4 and three thermistors ,it just goes def with two ! Ok so far so good ,def gone ! Then start to put the drivers on Ex 1 , not def , X driver nothing screen out nothing , swap for new driver , screen on no def .by zurferjoe - Repetier
And the screen has gone , its now just square dots !by zurferjoe - Repetier
ok now Im showing my lack of know how ! How do I open up the GRR Repeiter program with Arduino 1.0.1 ,when all it does is open in the latest 1.8.11 . I am at a loss .by zurferjoe - Repetier
Ok I borrowed a ramps 1.4 ,I already had a new Arduino Mega spare, and got these Pronterface thermistor readings T0 raw value = 984 and T1 raw value = 982 ,I put a spare thermistor I had on T3 and got 981by zurferjoe - Repetier
Ok will order new , I will let you knowhow I get on , and thank you again , Harryby zurferjoe - Repetier
So here we are ! Pronterface and all . I dont understand the hot bed sensor / thermistor defect .Its the thermistor defect , but I put another one on the two pinned T1 pins and it still reads defect.Does this mean the board that pins are on is defect ? Hope you can help ,and understand thisby zurferjoe - Repetier
Im trying to open your suggested download but my lap top keeps crashing ! I will be getting my Widows 10 equiped pc back tommorow and hope I can get all this sorted . As for the tech talk , Im sorry I a newbie and learning it all . But when I 3D print its pretty big stuff , I make motorcycle parts for oldtimers,well at least the caing moulds to cast the bits in alloy etc , just getting the priby zurferjoe - Repetier
Hi there ! I got the firmaware fro German Rep Rap for the V3 .Its Repeiter Arduino think this is everything , thank you for replying ,Harryby zurferjoe - Repetier
I am having a problem with my printer after replacing the Arduino mega board. Downloaded the German RepRap Protos V3 firmware all looked good but the thermistors for the heated bed and the extruder show def on the screen . I have put two new thermistors on To1 and T1 and still the same def .Any one out there have a clue whats going on ? Hope to hear soon ,thank you .by zurferjoe - Repetier
On my printer , I keep getting the def on my thermistors for the bed and the extruder .I have put 2 new thermistors on both devices but it still shows DEF ,Any ideas what this could be ? Hope so !by zurferjoe - Firmware - mainstream and related support
I am trying to update my Marlin equiped printer .The update is from Github for my German Rep Rap Protos V3 . I try to run it through the check upload and get ,expected primary-expression before `const` . Any idea what this can be ? Hope you can help thank you Harryby zurferjoe - Firmware - Marlin
Yes to the dont like to the changes !! Learn it all over again !! And better ? No ! Fusion 360 is for me the only way to go fantastic , then they did that !! And you cant revert to the old system ! Why not ?by zurferjoe - Printing
No Dust on you my man !!! Thank you very much have a great day !!by zurferjoe - Printing
Hi folks , Im having a problem with my lower toolbar the one at the bottom of the screen with the move by hand sign the zoom, revolve and all that , I place the curser on each one and it does not respond ! Any ideas whats going on ?? Hope to hear soon Harryby zurferjoe - Printing
Ok thank you , I have made a complete new design and hopefully closed all the doors !! But ofcourse have another problem , I had this before and I think the method I used to get over it did not suit the program , I am trying to put this fillet onto this outer surface with an arc and top Line and then use sweep and profile as seen and then path to follow and then cut ! But as you can see there isby zurferjoe - Printing
Hi there , Im having problems with my up till now trouble free converting and STL into actual printing the part . I transfer the part to my printer , I use Fusion 360 for the design and convertion to STL . Then it all goes wrong ! I can only print with a part standing up , picture included,and if I lay it down its chaos plus !! Even printing upright is bad ,picture enclosed , the grey one on theby zurferjoe - Printing
Well I dont do theory ! I make mistakes and improve on them ! This was not a mistake !I tried it worked quality perfect (for me anyway ) And Im not going deaf ! All good I think !by zurferjoe - General
Hi out there , I have just fitted Stepper motor dampers to my Rep Rap ! I can hear again !! fantastic and cheap ! Try it its another peacefull world ! Enjoyby zurferjoe - General
Ok got it diagnosed , and the plug cant be replaced due to inner damage to board . Have replaced the board with a excat copy of the original GT 2560 Geeetech i3 clone , Marlind it up all works , kinda ! But the LCD screen just shows squares ! Had this before , cant think what the hell I did then ! Any clues ?by zurferjoe - Prusa i3 and variants
I think I will have to ! Thanks for the reminder !!by zurferjoe - Prusa i3 and variants
Hi folks , hope you can help .I have had to replace my GT2560 mainboard as the old plugin socket broke up .So I have to reload the firmware onto a new board ,think Ive done it ! BUT ! The screen has just squares and I am getting a peeping noise coming out of the printer when switched on . Also even though the printer was not was not switched on the hot end temprature shows 135 degrees.Wiring lby zurferjoe - Prusa i3 and variants
Just finished printing a cylinder head for my 175cc J.A.P engine from the 30s ,a twin port race engine . The head took 17 hours to print and will be used as a lost wax/plastic form , they just burn the plastic out and your left with the sand form . The stl program was written on Fusion 360 and printed with Simplify 3D on my German Rep Rap .Hope to get the little racer going ,its been laid dormantby zurferjoe - Look what I made!
It looks like Im missing the CH340 driver ! Hope thats all !! Thank you for you helpby zurferjoe - RAMPS Electronics