... i received some stuff from one of my previous employers who sold his company and 'disposes' all remains. This were mostly the microassembly-tools i developed then - the modified manual SMD-placer mentioned in a previous post, a nanopositioner, some drivers and all the remaining microscope-cameras ... atached an image of the parts ... Furthermore an image-recognition-system with a 1600x1200@by VDX - Pick-and-Place Electronic Assembly (and robots!)
... nope, the pin was shown after reloading on page1, now i scanned all pages and its not thereby VDX - Reprappers
... i deleted my pin "Viktor" floating in the Atlantic and set a new one with "VDX", saved, reloaded and found it ... and now it's gone againby VDX - Reprappers
... ich habe mir vor kurzem für einen Fori Granulat-Proben von ABS (Natur, cremefarben/beige) und PLA (unmodifiziert, weiße kugelige Klümpchen) geben lassen - da scheints auch von PLA diverse Typen zu geben, denn die Gebrauchstemperaturen waren deutlich höher, als in unseren bisherigen Materialeigenschaftslistenby VDX - Neue Ideen - Archiv
... i was tinkering with dispensing a paste mixed from glass-microspheres and waterglass, thats relative fast drying/hardening at open air but stays fluid in the cartouche. Another possibility is a diodelaser-head following the paste extruder and heating the tray for curing it ... or an aerial IR-heater moving over the complete build-area after every outputted slice ...by VDX - Paste Extrusion Working Group
> Yup. Zach runs Thingiverse and the RepRap Research > Foundation store. And Makerbot. And he's on the > RepRap "core team", apparently. ... an he's listed as moderator of the coreteam-group and the RRRF-groupby VDX - Administration, Announcements, Policy
... after i found my pin floating in atlantic midwater, replaced by someone called 'brain', i lost the interestby VDX - Reprappers
MarcusWolschon Wrote: ------------------------------------------------------- > 0,12 was? Layer-Breite oder -Höhe? ... bei Dimension ging es vor allem um die Breite - da sie den Tray 'auslegen', ohne ihn plattzuquetschen, ist die Höhe dann etwas geringer, aber immer noch knapp über 0.1mm ... Mit Stretchen oder Plattquetschen kannst du zwar etwas dünner werden, als der Durchmesser des ursprünby VDX - Altes Forum
Hi Anton, ... i atached a paste-dispenser to my CNC-mill ( ), but are busy with developing/testing with diodelasers, so it's actually not in use For fabbing i'll use G-Code and a modified postprocessor for my Isel-controller, where i changed the milling-speed output for driving/controlling the dispenser. For start printing i can apply a delay, where the dispenser-motor starts some milisecondby VDX - Mechanics
Hi Marcus, Dimension hatte 2005 schon leichte Schwierigkeiten von 0.18 auf 0.15 zu kommen und ihr nächstes 'vorsichtig angepeiltes' Ziel waren 0.12mm - ich denke, daß du die 0.1mm nur mit starkem 'stretching' hinbekommst und da dürfte es nicht wirklich reproduzierbar seinby VDX - Altes Forum
... i've reported it as SPAM ... seems to be a new method - no text, only "mailtoXX" activeby VDX - Administration, Announcements, Policy
... i use clear/transparent shrinktubes from Raychem - they're specified until 250 centigrades ...by VDX - General Mendel Topics
Hi Maggii, ... wenn der Treiber soweit funktioniert und korrekt angesteuert wird, ist evtl. der Strom zu niedrig oder du mußt bei einer Phase die Anschlüsse vertauschen ...by VDX - Offtopic
... i used pepakura for 3D-objects made from engraved Dibond (3mm thick sheets of plastic laminated with 0.5mm aluminium). The 3D-object were unwrapped by pepakura, the outlines and folding lines milled with a CNC-mill and then folded to represent the 3D-object again. With a similar methode you can reprap the plates and sides of a 3D-object connected by thinner joints so you can fold/wrap the fby VDX - General
... müßte jetzt eigentlich drin sein Damits auf jeden Fall zu sehen ist, hier nochmal als embedded image:by VDX - Altes Forum
... anbei ein Foto des analogen 4-Achs-Steuerungssystems - der Klotz links (ELN-1) ist das Netzteil, das alle Komponenten mit 24V versorgt, Vorne der Joystick mit XY über den Knüppel, Z über das obere Drehrad und eine 4. Achse (z.B. Greiferweite oder Winkel) über das untere Drehrad mit Zu- und Abschaltung. Im Joystick werkelt ein PIC, der die Stellung des Joysticks und die Drehposition der Knöpfby VDX - Altes Forum
Hi wakeer, die Kameras sind standard-Videokameras mit etwa 30 fps - was dein Videograbber daraus macht, ist wieder eine andere Sache. Mit den Fingerkameras hast du max. 720 Pixel in der Bildbreite - bei 3mm Bildbreite also theoretisch 4.17 Mikrometer pro Pixel ... 15 bis 30 Mikrometer dicke Drähte werden also zu sehen sein, wie scharf die Abbildung ist, hängt dann noch von der Beleuchtung ab -by VDX - Altes Forum
... ich habe bei Vimeo ein Video hochgeladen, in dem ich die Montage von 0.35mm dicken Stablinsen auf eine 0.35mm dicke Endoskopfaser demonstriere (Glycerin statt UV-Kleber) - hier ist der typische Anwendungsfall und im letzten Teil die SW-Kameras gut zu sehen ...by VDX - Altes Forum
Hi wakeer, anbei ein Bild von dem letzten Schwung - links die Farbigen mit dem Makroobjektiv und Blenden (zwei zerlegt, ein paar andere davon und Objektive hätte ich aber zur Not noch da) und rechts die 'glatt-konischen' sind die schwarzweissen mit den Stablinsen. Auflösung ist immer Video-Standard 1Vss, also je nach Monitor/Grabber 720x562 oder 640x480 pixel. Die Vergrößerungsangaben beziehenby VDX - Altes Forum
... der SMD-Bestücker ist ein Fineplacer von Finetech, den ich umgebaut und einen 3-Achs-Nanopositionierer mit selbstentwickelten Ferrofluid-Aktoren draufgesetzt und zwei Fingerkameras für die Kamerabeobachtung an den PP-Kopf dranmontiert hatte ... Die 'Analogsteuerung' ist eine Gruppe von Geräten für derartige Systeme: ein Analogjoystick für XY, ein digitaler Drehknopf für Z, noch einer für dieby VDX - Altes Forum
Hallo Leute, ich habe gerade die kompletten 'Überreste' der Mikrotechnik-Abteilung meiner vorletzten Firma 'geerbt' ... darunter auch drei Acad14-Vollversionen, eine Acad13, SolidEdge-Zusatz, Mechanical Desktop, Genius (?) und noch ein paar Zusatzprogramme - muß daheim mal schauen, was da alles zusammengehört. Ich will mal schauen, was sowas heute noch wert ist ... evtl. mal bei Ebay reinsetzenby VDX - Altes Forum
... i have some heat-cured modelling material called "Fimo" whats hardened in the oven at 120°C and isn't so brittle as clay. Its available in all possible colours and you can mix the colours for all desires. Maybe its possible to find a solvent for designing a fluid paste from the base material, but then you can search other heat- or UV-cured comercial available pastes, what should be easier tby VDX - General
... i think its more the separation in two basic areas - cutting thick sheets with high power, whats only possible with big and/or expensive lasers ... - and lowpower-applications like marking and sign-making ... I've seen many DIY-systems around BluRay diodes with 100mW power and IR-diodes with 500mW to 1Watt, so this is a really active area too. We should start both directions: - big/bulky hiby VDX - Laser Cutter Working Group
Hi Chris, ... really, you can't cut transparent or bright materials And with only 5Watts you're limited to thin plastic sheets with absorbing properties - but this is enough for (3D-) laminating and lettering/marking With powder-sintering you can make 3D-objects or you can coat a surface with a thin slice of powder (or paste), melt partially and remove the not melted material ... with this iby VDX - Laser Cutter Working Group
Hi Eric, ... 'good' CO2-Lasers have lifetimes of 200 to 400 hours, then the gas isn't clean enough for optimal operation and the output power reduces slowly until inoperability. Cheap chinese CO2-lasers can degrade 20% to 30% even after only 50 hours constant operation Diodelasers have lifetimes between 10.000 to 20.000 hours in 100%-mode and if you drive them with max. 90% (e.g. only 4.9Ampsby VDX - Laser Cutter Working Group
Hi Erich, ... das ist auch mein Ansatz - ich habe schon ein paar Netzwerke (auch auf kommerzieller Ebene bzw. im Bereich Forschung/Entwicklungskooperation) initiiert, da ich hoffte, über Kooperation mit Firmen und Instituten schwierige/teure Aufgaben schneller/günstiger lösen zu können. Der Start lief meist über die Entwickler/Forscher relativ kollegial und informativ, dann haben die Manager unby VDX - Altes Forum
Hi Wolfgang, Stoffel15 Wrote: ------------------------------------------------------- > Nabend... > > war Peters-CNC-Ecke nicht früher mal ohne > Anmeldung lesbar ? Ich meine mich an sowas > erinnern zu können... ... hab' mich grad mal abgemeldet - die Forumsstruktur ist da, aber in den Unterforen sind dann keine Beiträge zu sehenby VDX - Altes Forum
Hi Erik, ... between 1990 and 1995 i built three different CO2-lasercutters similar to the linked types - one with a 'naked' 3W-tube, two with sealed RF-CO2-laser with 5 Watts. Modern lasers have more power, are cheaper and easier to use, but have the same strong limitations in lifetime as my old ones - after some ten hours of constant use the output power decreased and i had to recalibrate theby VDX - Laser Cutter Working Group