this is definitely a pre Trianglelab / Mellow thread lol ... or Turnberg 3d or other clones that i literally choose over the original e3d v6 hotends I own ....by ormerodnewb - General
where do I insert this? and does the value come after? how do you comment/uncomment things?by ormerodnewb - Smoothie
I purchased a delta kossel linear plus delta printer (the first delta printer I own) Also the first time interacting with smoothieware firmware... so a lot of unknowns, but it was working... it had a smart RepRap LCD 12864 Display installed, and I had an MKS 3.5 TFT v1.0 touchscreen and wanted to attach it to the mks sbase 1.3 board the printer was converted to (with external 2208 drivers externaby ormerodnewb - Smoothie
i added a mks tft3.5 v1.0 to a mks sbase 1.3 just aux1 to aux1, flash firmware off sd on the screen before connecting it to the board (add files to sd card, plug card into tft and USB to USB off your pc) then press the button on the back of the screen to reset and it will install the firmware of the tft ... then plug it in aux1 to aux 1 ...... obviously configure the configuration text before pluby ormerodnewb - Smoothie
Hi I am working on a high temperature capable cr10ish printer I would like to install a pt100 sensor to monitor the heating of the hotend (v6 gold edition with copper plated heat block and nozzle x) I would like to know how I can wire the thermistor to a panda pi. but I also have a skr 1.4t, skr 1.1 and a mks sbase 1.3. I would prefer to use the panda pi but after months of trying to make this prby ormerodnewb - Bounties
I need to get 400c on my hotend, I have a pt100, a signal boost board, and after following a tutorial and destroying a perfectly good 1.4 turbo with no results I gave up on the signal booster and got the max31865, the thing used on the duex 2 boards. I can flash rrf on my other skr1.4 turbo with the new device they sell for this purpose, or I have a smothieboard mks sbase 1.4, which can be flasheby ormerodnewb - Reprappers
before attempting to run a anet a8 at 500c PLEASE tell me you upgraded it to blv mod with 2020 aluminium extrusions and you are not using acrylic. That would just be an accident waiting to happen.....stock a8s burned houses.... adding 500c to that is just a bad idea.by ormerodnewb - General
how would i install one with marlin 2.x.x on skr pro 1.4 turbo with tmc2209s ?by ormerodnewb - Firmware - Marlin
It's not only abs.... but asa also works best with the heated chamber and so does petg actually, pet and other plastics like pp and ht stuff .... if you want to make mechanically valid parts not just decorations then you need an enclosure ... polycarbonate, pom all the blends. I also have a neo and I ordered a silicone heated matt (250 watts) a heating element to place inside and a ledge x boardby ormerodnewb - General
My second-hand ender 3 pro came with this board (creality1.1.4) a melzy board with trinamic 2208's apparently, And I am wondering if I can use this board with a cr10, and modify the size of the build volume in the firmware somehow. I replaced my 1.1.4 with a skr e3 v1.2 which I am happy with but I don't want to just trash this.... and i have some cr10s in bad shape that need some electronics andby ormerodnewb - Controllers
connect to your printer through pronterface (on a computer) and try G28 (home all axis) G29 (auto ABL) and see if it starts ABL ... after that M500 and M501 to load the saved settings. Then as a test try M503 to get a ping of your configuration where the mesh data that your probe collected should appear. I am having troubles with this too actually. The printer is going through all the steps and cby ormerodnewb - Printing
Hello, I have just gotten my hands on an Ormerod 1 and moving the axis through Pronterface seems to work, but when I try to extrude or heat up the hot end it tells me that there is no tool selected. Why am I getting this error on heating the hot end, or on trying to extrude? This is the first RepRap printer that I have and I am a complete newb to this. Can anyone help me out? Or at least point meby ormerodnewb - Ormerod