Did you try this with ABS?by karabas - Mendel90
It's impossible! How did you do this??? What are settings, filament, layer, nozzle?by karabas - Mendel90
I am interested in dibond version with nonscrew Z. Dibond 3mm is available.by karabas - Tantillus
If you have "free" nuts in Z carriages try to load left carriage with a weight and repeat tests. Left carriage is very lightweight and sometimes it even does not press low endstop (in older versions).by karabas - General
Quoteumdpru Hello, I Can someone help me? When I try to download and run Craftware it says the installer is not a valid Win32 application? The same. Under windows XP.by karabas - Software
QuoteCefiar Should work. My local hackerspace did the same with a laser cutter after the default hardware bricked itself. It's now running a custom board but it was running RAMPS for a while. Biggest issues driving external stepper drivers is: 1. Logic level. that is why I want to feed DIR ans STEP from RAMPS not direct to drivers but to stock LPT controller. I think logic levels LPT and RAMPSby karabas - RAMPS Electronics
I need fast convertion large CNC router to 3d printer. CNC is controlled by LPT controller and EMC2 software. I have an Arduino + ramps1.4 with Marlin and think about to replace 3 stepsticks(x/y/z) with diy adapters wired to LPT to control big drivers. Also I want to get endstop signals from LPT and connect them to RAMPS. Will this work? Extruder driver remains on RAMPS. Wires to head will beby karabas - RAMPS Electronics
Beer (or sugar) does not work for PLA because temperature is too low. i use clear glass (with antiglare surface) for PLA. I set 80C for the first layer and low down for next ones. Use only true smell PLA! As for ABS To see significant colour change of glass you need to paint many times ( 5-15) the hot glass. I am too lazy to clear the glass every print so I simply paint even not the whole glaby karabas - Ormerod
I use beer-on-glass-painting as the best for ABS printing. I paint after each printing. Will the sensor change reading?by karabas - Ormerod
Printing support I notice "curling". See pic. But there is no delamination or overhangs so It's not real curling. I lowered down efeed (on the fly with M221 Sxx) as low as possible but it seems it's not feed problem. I think it something with speed changing. Acceleration? What I need to tune to make all this flat? When infill does not touch perimeters I see the same blobs... It's PLA. Ramps1.by karabas - Mendel90
Great! But does not work under wine on linux (( So I run it in VirtualBox...by karabas - General
I replaced my fan cooling with dot cooling ( how to say correctly?) I bought: - cheap china fishbowl air pump. I bought with 2 connectors 3L/min and regulator - 12$ - flexible tube - alu tube (mine was TV antenna part) - medical needle ( big diameter) Test pyramid ABS, layer 0.3, high temp ( 230-250C). I did not clean glass from dust(did not print about a month) so some delaminationby karabas - Mendel90
Can you sell a pair with AMT103? It's a bit expensive to buy internationally separate parts...by karabas - General
What is your retract settings? If f.e. Torsional Deflection = 6(12) degrees per ft per lb and effective diameter of hobbed bolt = 8 mm and stepper max torque = 4.4kg/cm for 900mm shaft and 40:1 reductor we get about max 0.125 - 0.3 mm e-feed error. I wonder if it is acceptable. It seems it's better than bowden.by karabas - General
QuoteMutley3D Quotekarabas What is the exact weight? 39.22grammes without hotend Including flexible shaft?by karabas - General
What is the exact weight?by karabas - General
QuoteSublime Quotekarabas QuoteSublime I have added an inset feature to my branch of Cura.. Does it affect both dimensions - internal and external as kisslicer does? Or only internal? It affects both internal and external. It just adds the extra inset to the one already calculated to inset the path half the extrusion width. Currently the Cura engine does not differentiate between them. It just iby karabas - Experimental
QuoteSublime I have added an inset feature to my branch of Cura.. Does it affect both dimensions - internal and external as kisslicer does? Or only internal?by karabas - Experimental
всё это выставляется там же в марлине. у меня тоже стояло быстрее чем надо и нормально не работало пока не убавил по Zby karabas - Russia RepRap User Group
Ok. I agree. More exactly I mean "good looking" insteed of "quality". Means nothing for techical purposes. But what about printing f.e. sculpts? When you print you parts at 50mm/s are they significaly better looking? I consider to build my third printer and want it to be big. I saw pics of Ingentis prints. They are good for me. But I don't think it's reasonable to scale it up to 1 X 1 X 1mby karabas - Reprappers
methylene chloride for PLA acts like acethone for ABS. You can glue even filamentby karabas - General
For ABS. Once more. No kapton. No spray and other chemical shit. Just plain glass heated up to 110-130C and painted with beer.by karabas - Printing
I tried to intall apk and got syntax error. LG-p500 android 2.3.3by karabas - Developers
Quotesamp20 The problem was a flexible bed to nut attachment. I've now designed and printed a sturdier mount which seems to have significantly improved things. I've also shimmed the bed to linear bearing mounts with a few pieces of paper to get the leadscrew nut holder vertically centred. The new mount and the paper have also reduced the vibration to levels I think are acceptable. Did you fix it?by karabas - Extruded Aluminum Frames