Quotewendychai80 Quotegforce1 It is all printed with ABS. No modifications were made after the completion. I am now designing a new one with a 300x300 heatbed and 300 mm in the z-direction, two(or three)belt driven leadscrews, linear guides,Dual extruder(chimera).Outher dimensions will be 500x500x500 mm. Nice, any thread that i can follow your build? preview:by gforce1 - CoreXY Machines
No not yet. It is still on the drawing table..by gforce1 - CoreXY Machines
It is all printed with ABS. No modifications were made after the completion. I am now designing a new one with a 300x300 heatbed and 300 mm in the z-direction, two(or three)belt driven leadscrews, linear guides,Dual extruder(chimera).Outher dimensions will be 500x500x500 mm.by gforce1 - CoreXY Machines
These are older pictures.The cabling is all done now.by gforce1 - CoreXY Machines
Yes, i have build one. Made a few changes fot a nicer belt configuration.by gforce1 - CoreXY Machines
I have mounted the min-endstop for the x-axis on the leftside off the x-carrigae. The y-min endstop is mounted on the front on the left hand side y-smooth-rod. Home position is on the front left off the heatbed.by gforce1 - CoreXY Machines
Looks like you connected your 12v power supply --++instead of -+-+by gforce1 - General Mendel Topics
Dit heb ik nog gevonden in PINS_H #ifdef TEMP_STAT_LEDS #if MOTHERBOARD == 67 #define STAT_LED_RED 6 #define STAT_LED_BLUE 11 Dus ik denk dat dit alleen kan met een Azteeg X3 motherboard. Of je moet dit omprogrammeren naar twee vrije digitale pinnen op je eigen motherboard ( Ramps ?)by gforce1 - Electronica
In het gaatje naast het onderste inbusboutje dus in het vaste deel komt het hotend. Dus ik weet niet hoe je hem wilde monteren?by gforce1 - Extruder, Hotend en Filament
Met de bovenste inbus wordt de veer op zijn plaats gehouden. Met de onderste stel je inderdaad de veerdruk af. Deze valt in het kopje van de middelste inbusbout.by gforce1 - Extruder, Hotend en Filament
QuoteFrans@France QuoteReplacek heb wel het idee dat de boel wat mee door druppelt als hij geen filament feed doet, door compressie in de lange aanvoer. Zou dat zo kunnen zijn ? Ja, oozing schijnt een probleem te zijn van een Bowden. Dit kan je goed opvangen (voorkomen) met de retract settings in het slice programma. Het grote voordeel is natuurlijk de gewichtsbesparing, zeker bij dual extruderby gforce1 - Extruder, Hotend en Filament
The alu profiles are 20x20 mm. The total dimension of the cube is 400x400x400 mmby gforce1 - CoreXY Machines
Why are you making these updates? What is the purpose of flipping the motors? The leadscrew i can understand.by gforce1 - CoreXY Machines
Welkom, kijk eens hier P802M edit: sorry ik zag later pas dat je deze al gezien had. Volgens mij staat je antwoord in de post boven je eigen reactie.by gforce1 - Algemeen
Hello, This has nothing to do with Cura. The y-motor is missing steps. Lower the speed in marlin. Here is an example: #define DEFAULT_AXIS_STEPS_PER_UNIT {80.00,80.00,3200/0.8,400} // default steps per unit for Ultimaker #define DEFAULT_MAX_FEEDRATE {200, 200, 2, 45} // (mm/sec) #define DEFAULT_MAX_ACCELERATION {9000,9000,100,10000} // X, Y, Z, E maximum start speed forby gforce1 - Prusa i3 and variants
Just trying to help. QuoteSandyEggoCNC I've been printing for several days now and just noticed the continents on the globe I just printed are backwards. QuoteSandyEggoCNC I just confirmed my X and Y axis are both backwards. If I manually jog them, I have to use the opposite directional buttons in Repetier to make them travel where I want. Obviously you don't know how to set up your printer.by gforce1 - Prusa i3 and variants
There are different ways to set up your printer. Here is one way, When you home at the min-endstops (0,0) the extruder is in the left-front corner of the bed Min-endstop x-axis is on the left. Min-endstop y-axis is on the back. When you jog the x-axis positive the extruder moves to the right. When you jog the y-axis positive the bed moves to the front. Goodluck.by gforce1 - Prusa i3 and variants
Change the positiion (from front to rear or from rear to front) of your y-min endstop and invert the direction of the y-motor.by gforce1 - Prusa i3 and variants
Place your x-max endstop on the leftside, replace your connector on the board and configure it as x-min endstop,by gforce1 - Prusa i3 and variants
here it is.by gforce1 - Prusa i3 and variants
Allemaal de beste wensen voor 2016. Groetjes, Hans.by gforce1 - Off-Topic
Bedankt, en ook van mij allemaal fijne dagen. Hans.by gforce1 - Off-Topic
You can not extrude when the hotend is cold, heat it up first. or set the "temp for preventing cold extrusion" in the firmware lower.by gforce1 - Prusa i3 and variants
Dit kunnen eigenlijk maar twee dingen zijn: of je z-as gaat niet hoog genoeg per laag, of je legt teveel filament neer. Heb je alles wel goed gekalibreerd?by gforce1 - Algemeen
Als eerste heb je deze software nodig voor de arduino dit installeer je op je pc (of laptop). Dan download je Marlin of Repetier Firmware. Deze software open je met de arduino software. hierin configureer je de setup van je printer, en laad dit naar je printer (arduino mega). Vervolgens heb je software nodig om de te printen voorwerpen te verdelen in laagjes om te kunnen printen. Dit is een "sliby gforce1 - Software
Quoterealthor What is the diameter among these values? and what do they mean? 8mm x 10mm x 12mm; I take it that 8mm is diameter, 10 or 12 is the length and the third dimension no idea. Inner Diameter: 8mm/0.31" Outer Diameter: 10mm/0.39" Length: 12mm/0.47"by gforce1 - CoreXY Machines