Search results

Jump to: navigation, search

Create the page "Objects" on this wiki! See also the search results found.

Page title matches

Page text matches

  • Wanted Objects
    *^^ A wide range of almost arbitrarily shaped objects for everything from the chuck on a drill to the focusing assembly on a digi
    8 KB (1,167 words) - 07:09, 25 May 2020
  • Health and Safety
    ...econd-hand lathe on eBay and using that to turn up all sorts of very nasty objects. However, the RepRap researchers will work actively to inhibit and to subv
    10 KB (1,581 words) - 20:58, 5 January 2018
  • A community specification for an improvement to STL files.
    * [[Firmware/Alternative]] mentions converting 3D objects to one of several 2D formats (PostScript, splines, etc.), then converting d
    9 KB (1,363 words) - 14:04, 8 October 2015
  • Available Files
    Don't see what you need here? Add it to the [[List of wanted objects]] and perhaps someone will design it for you!
    3 KB (484 words) - 08:00, 2 January 2015
  • Coat Hook
    There are two objects in the Art of Illusion model: one has through-holes for screws; the other j
    770 bytes (131 words) - 00:09, 10 January 2011
  • Main Page Mockup
    ; [[Available Files]] : Download and print objects that have already been designed. ; [[Wanted Objects]] : Suggestions for things that a RepRap might usefully make.
    4 KB (477 words) - 05:15, 26 November 2011
  • File:Knob-by-nophead.aoi
    ...ume you have AOI so can make the STL. I have been meaning to put it on the objects wiki but have not got round to it. If published it really needs a table of
    (12 KB) - 05:34, 24 August 2008
  • Knob
    ...ume you have AOI so can make the STL. I have been meaning to put it on the objects wiki but have not got round to it. If published it really needs a table of
    1 KB (262 words) - 08:23, 16 May 2015
  • Builders/Links and Blogs
    * [http://www.thingiverse.com/ Thingiverse] collecting objects that can be base, including upgrades and enhancements to RepRap parts.
    4 KB (559 words) - 08:41, 13 May 2020
  • Build a reprap
    ...used in Rapid Prototyping. These STL files can be printed off into real 3D objects using your 3D printer (RepRap).
    10 KB (1,695 words) - 12:12, 7 March 2013
  • Builders/Replath
    *** 3D - Paint extruded objects
    2 KB (344 words) - 00:10, 19 January 2013
  • FTIStrap
    ...alls (in relation to their size, of course): one of the first printed test objects, which accidentially got thicker than foreseen, turned out to be really rig ...using hot-glue for printing complain that they were unable to remove their objects from the base plate they printed on - the author never had these problems.
    66 KB (10,989 words) - 03:03, 28 April 2012
  • User talk:GorgHuff
    ...ch them to the stl files so that people will have a chance to see what the objects should look like. At least vaguely.
    2 KB (341 words) - 03:27, 26 November 2008
  • User:GorgHuff
    ...the near future not being mechanically inclined. But I can make 3D virtual objects and export them as stl files.
    974 bytes (182 words) - 09:50, 26 November 2008
  • Builders/Metalab
    ...ach layer cools off seperatly are reduced allowing you to make relly flat objects. We have not tried out Adrians fan solution but that might be an even simpl
    2 KB (273 words) - 04:11, 24 November 2012
  • Builders/Metalab/AoI CSG Evaluator
    ...ne click re-evaluate the boolean tree. Away with the long lists of Boolean Objects that spoil your nice AoI file! ...be and the sphere we just created (hold the Ctrl button to select multiple objects) and press the "difference" button in the CSG Evaluator dialog. This might
    7 KB (1,079 words) - 06:34, 11 January 2015
  • ArduinoSend
    ...e doesn't use these features. It might be nice for a future "print several objects at once, automatically filling the bed area" interface. And if I get my ext
    3 KB (501 words) - 10:12, 7 May 2015
  • Builders/Metalab/AoI MetaCAD
    Create all other MetaCAD Operations (like union for example) by selecting the Objects the operation shouldbe performed on and click on one of the buttons in the You can change MetaCAD Objects and their parameters by editing their name-field. For the changes to take e
    5 KB (816 words) - 06:34, 11 January 2015
  • Talk:RepRap
    ...confuse new users. I would place there instead a feed aggregation for new objects on Thingiverse: http://www.thingiverse.com/rss/newest -- Thingiverse is als
    9 KB (1,412 words) - 03:30, 20 January 2016
  • 3DReading
    There is a standard format for describing 3D objects that is used by every rapid prototyping system, including RepRap.<br/> We are working on a general file format to represent multi-material objects. For details see our page on the [[MultipleMaterialsFiles|Multiple Materia
    2 KB (413 words) - 05:10, 19 July 2015
  • ZSlicing
    = Slicing the objects to make each build layer = RepRap has the objects to be built stored as [http://download.java.net/media/java3d/javadoc/1.3.2/
    2 KB (426 words) - 05:10, 19 July 2015
  • AModernism
    Outside the design of physical objects (which is still dominated by the tail-end of Modernism) what is today's mos
    4 KB (643 words) - 15:44, 4 January 2015
  • Art of illusion
    ...ngineering unit. Treat one AoI unit as one mm, and experiment by building objects of about the size that you want to end up making. ...out as an STL file. Things will get worse more quickly if you create such objects using curved surfaces rather than simpler flat planes.
    18 KB (3,206 words) - 06:33, 11 January 2015
  • Useful Software Packages
    ...e toward technical drawings than freehand sketching--for example, you move objects by editing their XYZ coordinates. Can be used from the command line to generate bespoke STL objects. e.g. > openscad -m make -s gears_helical.stl -D teethNum=15 gears_helical.
    27 KB (4,082 words) - 12:06, 26 October 2021
  • Calibration
    The following set of objects and notes are taken (and edited) from Coasterman who posted them to [[Thing ...of the software used, the techniques described and the set of calibration objects are invaluable.
    41 KB (6,863 words) - 16:15, 31 March 2020
  • User:Dvw5235
    ...ed" and a more user-friendly software that can directly covert CAD to 3 D objects. I probably would not say that theirs are more "advanced" but apparently, i
    14 KB (2,575 words) - 01:24, 1 May 2013
  • User:Protoman
    '''Objects Unlimited''' [http://www.Objects-Unlimited.com.com Objects Unlimited]
    283 bytes (39 words) - 10:53, 29 January 2013
  • Automated Circuitry Making
    ...at is basically foolproof if one is using the correct precautions. Simple objects needed to do the lab work could even be printed with a RepRap machine (etch
    23 KB (3,505 words) - 13:53, 28 May 2020
  • Darwin/BackgroundPage
    ...te that it implies a machine that is capable of building three-dimensional objects from both an [http://www.newscientist.com/news/news.jsp?id=ns99993238 elect ...as it's capable of making a copy of itself and producing some other useful objects. Evolution can be relied on to make very good designs emerge quickly. It wi
    12 KB (1,911 words) - 17:56, 13 October 2013
  • DFF course/Laser Cutter
    ...ttps://www.youtube.com/watch?v=arjRtCjI9AQ LaserOrigami:] laser-cutting 3d objects
    2 KB (319 words) - 10:56, 28 March 2013
  • Mendel/Files
    CAD files represent a part as the sum of multiple 3d objects that can be moved and/or manipulated so changes to the part can be made eas
    5 KB (689 words) - 11:26, 1 December 2015
  • Widget:Iframe
    ''Note to wiki admins'': this list is currently hardcoded in <code>/data/objects/htdocs/mediawiki/extensions/Widgets/smarty_plugins/modifier.validate.php</c
    1 KB (186 words) - 13:36, 13 July 2014
  • MediaWiki:Sidebar/Sandbox
    ** The RepRap Object Library|RepRapable Objects
    349 bytes (40 words) - 16:01, 27 January 2010
  • SplineScan
    Sub-millimeter scans of objects 2m tall.
    2 KB (263 words) - 08:17, 2 January 2015
  • Scaling
    There are a variety of work-arounds used to build large objects: Some people want to build objects with much tighter precision than possible with a standard RepRap.
    12 KB (2,021 words) - 20:44, 7 January 2020
  • RepLab
    ...making fasteners" rather than more specialized, higher worth components or objects? Like the spindle for a CNC mill, toys for your children, or a [[Below-The
    4 KB (662 words) - 09:34, 7 November 2013
  • Artifacts/Sperm Whale Tooth
    Tooth pendants are important cultural objects throughout the Pacific. Whale ivory and bone were taken from beached whales ...ckle St, now occupied by Massey University's College of Creative Arts. The objects have been created through a process of drawing, digital 3D rendering, and f
    1 KB (182 words) - 09:09, 26 June 2011
  • Artifacts/Bowl
    ...ckle St, now occupied by Massey University's College of Creative Arts. The objects have been created through a process of drawing, digital 3D rendering, and f
    1 KB (176 words) - 08:53, 26 June 2011
  • Artifacts/Chinese Soup Spoon
    ...ckle St, now occupied by Massey University's College of Creative Arts. The objects have been created through a process of drawing, digital 3D rendering, and f
    1 KB (173 words) - 08:54, 26 June 2011
  • Artifacts/Adze
    ...ckle St, now occupied by Massey University's College of Creative Arts. The objects have been created through a process of drawing, digital 3D rendering, and f
    1 KB (186 words) - 09:08, 26 June 2011
  • Artifacts/Utah Teapot
    ...ckle St, now occupied by Massey University's College of Creative Arts. The objects have been created through a process of drawing, digital 3D rendering, and f
    1 KB (174 words) - 09:10, 26 June 2011
  • Artifacts/Poi
    ...ckle St, now occupied by Massey University's College of Creative Arts. The objects have been created through a process of drawing, digital 3D rendering, and f
    1 KB (187 words) - 09:09, 26 June 2011
  • Artifacts/Matau (fish hook)
    ...ckle St, now occupied by Massey University's College of Creative Arts. The objects have been created through a process of drawing, digital 3D rendering, and f
    1 KB (155 words) - 09:00, 26 June 2011
  • Artifacts/Cicada
    ...ckle St, now occupied by Massey University's College of Creative Arts. The objects have been created through a process of drawing, digital 3D rendering, and f
    1 KB (187 words) - 08:56, 26 June 2011
  • Artifacts/Giant Snail Shell
    ...ckle St, now occupied by Massey University's College of Creative Arts. The objects have been created through a process of drawing, digital 3D rendering, and f
    1 KB (183 words) - 08:57, 26 June 2011
  • Artifacts/Tapa Beater
    ...ckle St, now occupied by Massey University's College of Creative Arts. The objects have been created through a process of drawing, digital 3D rendering, and f
    1 KB (208 words) - 09:10, 26 June 2011
  • Main Page/Sandbox
    ...] [[wikipedia:3D printing|desktop 3D printer]] capable of printing plastic objects. Since many parts of RepRap are made from plastic and RepRap prints those p
    5 KB (700 words) - 11:41, 19 April 2023
  • About
    ...viability of the open source development model for the design of physical objects], November 8th 2010, University of Tilburg, The Netherlands. ...Bath University] - is now in the [https://collection.sciencemuseum.org.uk/objects/co8357315/darwin-reprap-self-replicating-3d-printer-printer collection of t
    11 KB (1,573 words) - 09:29, 6 May 2024
  • The RepRap Object Library
    ; [[Available Files]] : Download and print objects that have already been designed. ; [[Wanted Objects]] : Suggestions for things that a RepRap might usefully make.
    1 KB (221 words) - 15:43, 4 January 2015
  • RepRap help
    * [[WhatWouldYouMake]] and [[Wanted Objects]] -- build better things with those tools
    3 KB (441 words) - 16:03, 17 May 2017
  • Patch
    Patches is our system that allows users to patch working documentation and objects files.
    2 KB (268 words) - 22:12, 13 November 2013
  • Mendel User Manual
    ...Main/MultipleMaterialsFiles RFO file format] - Saving and loading multiple objects on RepRap's build base.
    2 KB (304 words) - 10:15, 29 April 2012
  • Category:Development
    ...cus on just one of them, you can drop off the other good ideas at [[Wanted Objects]] or [[Ideas to place]].
    107 members (40 subcategories, 0 files) - 22:58, 30 April 2024
  • Java Software Preferences File
    ...ess the same - see below). Then you can flip between the two when you load objects to build. The colour of objects made by the material in this extruder in the graphics window.
    22 KB (3,532 words) - 17:59, 28 November 2014
  • User:Dud201/Blog
    ...ortance of 3D printing for the Space Travel in different ways, like making objects with different and complex geometries, can bring to real life CAD designs a
    12 KB (1,887 words) - 23:49, 12 December 2014
  • Metal deposition print head
    ...thing with the crt that mentioned perhaps if it is possible to build large objects that are low stress
    84 KB (13,534 words) - 22:26, 14 January 2016
  • Development:Workshop Tools
    Workshop tools are some of the most useful [[Wanted Objects]].
    4 KB (605 words) - 03:52, 16 April 2020
  • LeBigRep
    ...g#scaling_to_larger_RepRap|scaled up]] 3dprinter which would produce large objects with a 1 m3 max. dimension. big enough for printing a chair, a table, prost
    953 bytes (132 words) - 01:53, 5 February 2024
  • Erik's Bowden Extruder
    ...s, allowing much faster motion and less oscillations at the surface of the objects' exteriors. ...t starting with printing, because you may have some problems getting large objects to stick to the platform very well.
    6 KB (907 words) - 21:49, 19 November 2015
  • Cubex to RepRap Conversion
    ...ctions such as choosing which extruder to print an object or two different objects with two different extruders, there was just functions like print support o
    7 KB (1,045 words) - 06:20, 2 March 2017
  • Development Pathway
    ...viability of the open source development model for the design of physical objects. Lessons learned from the RepRap project"].
    19 KB (2,841 words) - 18:46, 2 December 2022
  • Everything in One Place
    [[Mister Bunny]] likes to make [[RepStraps]], but also neat [[Objects]] like a [[Carrot Cake Slicer]] or a [[Carrot Lathe]] like they use commerc
    3 KB (558 words) - 05:08, 26 November 2011
  • G-code
    ...l them. Basic usage: Use <code>M486 T</code> to tell the firmware how many objects there are, so it can provide an LCD interface. (Otherwise the firmware coun G-codes associated with the canceled objects are no longer printed. Firmware supports this feature by ignoring G0-G3/G5
    535 KB (81,593 words) - 20:05, 19 May 2024
  • Ceramic Extrusion
    ...for almost a year to successfully print earthenware and porcelain ceramic objects and is still a perfect tool to quickly test new material characteristics. I
    14 KB (2,240 words) - 01:34, 19 April 2014
  • RepSnapper Manual:Introduction
    [[File:Repsnapper.png|640px|Repsnapper printing a set of objects]]
    2 KB (307 words) - 11:06, 21 August 2013
  • Craftbot
    ...purchasing a tiny sized 3D printer. CraftBot is capable of printing large objects (250x200x200 mm, approx. 10x8x8 in). CraftBot has one of the biggest build 3D printing material shrinks as it cools down, therefore 3D printed objects tends to bend or warp during the printing process, causing the printer head
    4 KB (642 words) - 22:23, 21 December 2015
  • CraftWare
    ...support bars. With CraftWare, you can also attempt to print non-watertight objects.
    875 bytes (129 words) - 01:22, 18 December 2015
  • User talk:Sebastien Bailard
    ...action-for-matter.html levels of abstraction]) converting them to physical objects.
    10 KB (1,645 words) - 10:41, 5 August 2012
  • Kiwi-M5 Mendel Battle Tank
    = This Reprap based 3D printing machine is capable of printing plastic objects.= This machine now armed and printing objects.
    35 KB (5,908 words) - 00:54, 21 April 2013
  • RepRap project FAQ
    ...ommunity stores various resources and links, like forums, blogs, printable objects. ==Objects==
    22 KB (3,459 words) - 11:28, 22 May 2017
  • Main Page/Sandbox SB
    ...] [[wikipedia:3D printing|desktop 3d printer]] capable of printing plastic objects. Since a large part of the RepRap is made of this same plastic the RepRap c ...font-weight:bold;">[[About]] | [[The RepRap Object Library|RepRappable Objects]] | [[Community portal|Community]] | [[RepRap help|Help and support
    4 KB (556 words) - 12:57, 14 July 2014
  • RepRap II "Мендель" Иструкция по эксплуатации
    ...ain/MultipleMaterialsFiles| RFO file format] - Saving and loading multiple objects on RepRap's build base.
    1 KB (170 words) - 12:57, 16 March 2010
  • AlreadyDoneList
    ...rts that could be produced by a RepRap (VikOlliver). This produces limited objects from EVA
    4 KB (634 words) - 15:44, 7 October 2012
  • Wealth Without Money
    ...te that it implies a machine that is capable of building three-dimensional objects from both an [http://www.newscientist.com/news/news.jsp?id=ns99993238 elect ...as it's capable of making a copy of itself and producing some other useful objects. Evolution can be relied on to make very good designs emerge quickly. It wi
    11 KB (1,864 words) - 07:42, 7 March 2016
  • CartesianBOM
    ...f that tidying process, in May 2007 the filename has become <tt> reprap-objects-1.1.1.zip</tt>.
    3 KB (518 words) - 06:23, 27 November 2011
  • CeramicPrintHead
    Another approach to printing ceramic objects involves
    2 KB (363 words) - 10:40, 22 May 2012
  • DocumentationMain
    While the Mendel can already make some interesting objects, people (hopefully including yourself, dear reader) keep finding ways to pu ...ain-sells-bowyer.doc|incorporating electrical conductors]] into polymer RP objects - Ed Sells & Adrian Bowyer: Directly incorporating electronics into conven
    12 KB (1,622 words) - 05:39, 4 September 2015
  • DriverSoftware
    ...se two windows. The one on the left is a console that allows you to set up objects to be printed, to print them, and also to control the RepRap machine intera ...ously-loaded objects are not selected when you load a new one (loading new objects attached to previous ones is a special feature for printing in multiple mat
    47 KB (8,094 words) - 23:56, 5 February 2024
  • Electrochemical Machining
    ...s through or around the tool head. There is very little tool wear and the objects milled in this way are not distorted. This would allow the RepRap project t
    18 KB (2,902 words) - 10:27, 4 November 2013
  • Old RepRap project FAQ
    ...ated so that we can assure the desired level of quality control out of the objects that we create.
    26 KB (4,452 words) - 14:31, 29 February 2012
  • FuturePlans
    * Create a thriving online community around the machine, its software, and objects to create. * Expand the online community with a custom website of objects to build.
    4 KB (671 words) - 08:29, 10 March 2014
  • FutureToolIdeas
    ...ruder. Pump a syringe full of putty, then you can make even more intricate objects. It adds another layer of design challenge however. But thats a software ...th a higher powered laser it could even used to do laser sintering to make objects from a high strength metal.
    11 KB (1,769 words) - 23:25, 12 December 2014
  • Gear design
    ...done by editing the cog shape. To do this right click on your cog in the objects window and select "Edit Object". When the Curve Object window appears pull
    12 KB (2,042 words) - 21:54, 26 October 2015
  • Generation 1 Electronics
    ...re overhangs. Together, these extruders physically do the printing of the objects being made.
    4 KB (659 words) - 15:27, 23 July 2015
  • Glossary
    ...ufacturing as a power source in some printers to cure resins into solid 3D objects. ...a [[Recommended File Formats|recommended file format]] used to describe 3D objects. A design program (e.g. [[AoI]]) can produce an STL file which can then be
    17 KB (2,735 words) - 22:34, 1 May 2024
  • HDPE
    Larger and longer objects are likely to have more warping.
    3 KB (522 words) - 12:24, 18 March 2021
  • HotWaxSyringe
    ...for lost wax casting. The potential of being able to automatically create objects to mold for [[casting]] is a very exciting idea. ...help you form the kiln, the other tools for mold making ,and also the wax objects to be used for the actual mold too. With aluminum parts, you can start mak
    857 bytes (142 words) - 18:38, 25 October 2010
  • Introduction
    A rapid prototyper is a machine that can manufacture objects directly (usually, though not necessarily, in plastic) under the control of
    1 KB (171 words) - 13:48, 12 May 2015
  • InvoluteProfile1
    ...asy to do this with odd-numbered tooth count gears. First, look at the '''Objects''' list on the right-hand side of your AoI work window and click on the lar ...have to fill them with a triangle mesh. Select your gear again in the '''Objects''' list and right click. You will see a menu appear. In it select '''Conv
    6 KB (960 words) - 08:01, 2 January 2015
  • LaserEtchTool
    ...th a higher powered laser it could even used to do laser sintering to make objects from a high strength metal.
    1 KB (214 words) - 17:30, 28 November 2011
  • MaterialsScience
    ...xamined adding microscopic pigment particles to thermoplastic to color the objects we produce. We may end up using a five color print head, CMYKV, for Cyan,
    12 KB (1,822 words) - 13:14, 21 February 2013
  • Multiple material 3D model files
    To print objects using multiple materials we need also to represent objects made by more than one material. This page sets out and discusses the file-
    1 KB (203 words) - 15:48, 4 January 2015
  • User:Cjm5325
    :: 3D printing allows for manufacturing objects tailored to each customer.
    23 KB (3,868 words) - 19:59, 12 April 2013
  • RepRapDeveloperInstallLinux
    ...ul, fun, amazing, [[interesting]], or [[:category:useful|useful]] physical objects? ...and also the [[AoI|Art of Illusion]] design package for three dimensional objects uses it, so next we need a Java development environment. The following met
    17 KB (2,835 words) - 05:20, 19 July 2015
  • RepRapFileFormat
    * Grain direction (For regular objects, where we aren't trying to optimize filament geometry and mechanical streng
    3 KB (470 words) - 18:12, 26 November 2011
  • Reprap host software
    ...read by a standard Java3D file format handler that returns them as Java3D objects. These are basically lists of triangles in space - three doubles per corner === [[3DReading|Reading in 3D objects]] ===
    13 KB (2,177 words) - 05:27, 19 July 2015
  • RepRapLinuxSoftware
    ...and also the [[AoI|Art of Illusion]] design package for three dimensional objects uses it, so next we need a Java development environment. The following met ...s a representation of the build-base of the RepRap machine. You will load objects to be made here, move them to where you want them built, then build them.
    11 KB (1,755 words) - 11:38, 22 July 2015
  • RepRapLinuxSoftware2
    ...and also the [[AoI|Art of Illusion]] design package for three dimensional objects uses it, so next we need a Java development environment. The following met ...s a representation of the build-base of the RepRap machine. You will load objects to be made here, move them to where you want them built, then build them.
    16 KB (2,729 words) - 18:13, 26 November 2011
  • RepRapMacSoftware
    ...Java 6, and also the Art of Illusion design package for three dimensional objects uses it, so next we need a Java environment.
    3 KB (554 words) - 05:21, 19 July 2015
  • RepRapMicrosoftSoftware
    ...and also the [[AoI|Art of Illusion]] design package for three dimensional objects uses it, so next we need a Java development environment. The following met ...s a representation of the build-base of the RepRap machine. You will load objects to be made here, move them to where you want them built, then build them.
    7 KB (1,123 words) - 05:20, 19 July 2015
  • RepRapOneDarwin
    ...l as the plastic. This filler is used to support overhanging parts of the objects being built, and is removed when the process is finished.
    16 KB (2,446 words) - 02:11, 23 May 2015
  • RepRapOneDarwin2
    ...l as the plastic. This filler is used to support overhanging parts of the objects being built, and is removed when the process is finished.
    12 KB (1,963 words) - 18:18, 26 November 2011
  • RepRap software preferences documentation
    = This page is now obsolete. For the up-to-date one [http://objects.reprap.org/wiki/Java_Software_Preferences_File SEE HERE].. = ...ss the same - see below). Then you can flip between the two when you load objects to build.
    29 KB (4,225 words) - 18:18, 28 November 2014
  • RepRap software tweaking manual
    Other [[Apparently Connected Favorite Calibration Objects]].
    9 KB (1,430 words) - 18:19, 28 November 2014
  • Separate page on the question
    ...ch a way that they always resulted in fully-closed fully-three-dimensional objects. Everything that would give just two- or one-dimensional results was defin ...no God, but try getting a plumber on weekends." Think about unioning two objects with flat surfaces that are almost common, but at a slight angle to each ot
    7 KB (1,106 words) - 14:08, 29 November 2011
  • ShowCase
    ...STL files. But anything that can create an STL file can be used to design objects for the RepRap printer. This includes all commercial 3D CAD systems, and o ...ically sends all the instructions needed to the RepRap printer to make the objects. The right-hand window simulates the printer as it works; it is synchronis
    9 KB (1,479 words) - 18:30, 26 November 2011
  • Philosophy
    * [[Why is 3D printing such a powerful way to make solid objects]]. There's a lot of journalistic 3D-printing-is-the-next-industrial-revolu
    3 KB (471 words) - 09:09, 12 December 2014
  • Moldmaking Tutorial
    Position the objects you want to mould on a flat Lego base. You are going to build a wall round ...then bubbles won't have time to escape and you'll end up with holes in the objects you make. But remember that this resin sets pretty fast...
    16 KB (2,811 words) - 09:07, 13 September 2021
  • ThermoplastExtruder
    ...AoI you will find that the default viewfield (100) is much too big and the objects are too close. Change that to 5 to see things.
    52 KB (8,773 words) - 09:49, 5 January 2015
  • Useful links
    ...Rutgers University. (2020, April 28). A great new way to paint 3D-printed objects: Efficient painting method reaches nooks and crannies. ScienceDaily] ...boat and polymer 3D printer] Quote: "...Designed to additively manufacture objects as long as 100ft, 22ft wide, and 10ft high, this 3D printer has been built
    6 KB (679 words) - 01:57, 6 June 2020
  • What would you make
    ... [[Wanted Objects]] ...
    8 KB (1,113 words) - 15:43, 4 January 2015
  • Mendel User Manual: Extruder
    =Printed objects show brown/beige discolouration.=
    13 KB (2,270 words) - 06:25, 8 November 2012
  • Open Air
    ...ing less electrical power to keep them heated. It also means that delicate objects being made are not shaken back and forth during layering, so that thinner s
    4 KB (650 words) - 12:12, 7 March 2013
  • Carapace-Copier
    |description = Scanning of 3D objects ...Zealand) is doing a PhD that involves incorporating simple scanning of 3D objects into the Reprap toolchain to allow the user of the Reprap to do primitive 3
    2 KB (336 words) - 08:13, 2 January 2015
  • Инструкция по эксплуатации RepRap II "Мендель": Экструдер
    =Printed objects show brown/beige discolouration.=
    4 KB (646 words) - 15:35, 5 March 2012
  • Инструкция по эксплуатации RepRap II "Мендель": Программное обеспечение
    ...ition them in different places. Leave a gap of about 5mm between different objects to be built. ...iew/Main/MultipleMaterialsFiles described here]) for saving collections of objects positioned on the machine's build base.
    18 KB (2,265 words) - 15:59, 24 August 2015
  • Настройки ПО
    ...ess the same - see below). Then you can flip between the two when you load objects to build. The colour of objects made by the material in this extruder in the graphics window.
    27 KB (4,238 words) - 14:46, 26 November 2011
  • RUG/New Zealand
    ...Blender to modify the exported STL to enable Reprap host software to print objects.
    14 KB (1,817 words) - 05:52, 21 January 2015
  • Frame material
    ...hnik parts -- [[FTIStrap]] is the first RepStrap to succeed in printing 3D objects
    14 KB (2,005 words) - 09:54, 15 June 2020
  • Hot Rod ROBO
    ...ch team that came up with wire print found they could print 3D sketches of objects in on ly 8% of the time. What I would like to do is sightly different from
    9 KB (1,527 words) - 05:49, 26 March 2015
  • Y Bed Simplified
    The original Mendel Y bed upon which printed objects are deposited requires complex shapes to be cut out and uses rather a lot o
    5 KB (870 words) - 22:59, 27 March 2012
  • File:Printable Reprap.png
    ...ed photo of a theoretical reprap that could print itself and possibly even objects larger than it
    (1,596 × 762 (94 KB)) - 12:45, 9 October 2010
  • Using Blender for making print-sheets
    Blender is frequently used for arranging multiple objects to print in one batch. This can save a lot of setup time if you want many s ...) is joining the objects before export. Just make sure you've selected the objects you want to include in one STL.
    6 KB (1,094 words) - 06:40, 11 January 2015
  • MegaMendel
    It wouldn't work for tall objects as they start cracking due to the warping stress. ...e carpets stick to the floor - That was virtually impossible to get of the objects.
    21 KB (3,936 words) - 10:31, 17 June 2016
  • Java Software Preferences File/de
    ...ess the same - see below). Then you can flip between the two when you load objects to build. ...set true, this causes the system to start plotting outline patterns around objects from in the middle of their hatch infill, using a few of the hatch lines to
    30 KB (4,700 words) - 15:25, 26 November 2011
  • Mendel User Manual: Host Software/de
    ...open. The one on the left side is a console with which you can set up the objects to be printed for printing and with the RepRap machine, you can also use in ...utton to the next object. Leave a gap of about 5mm each freely between the objects.
    27 KB (4,531 words) - 23:28, 13 February 2024
  • MetalicaRap
    Switch Mode Power Supply Transformer insulators ( ensure G code objects have solid walls in ABS) jreinhardt; you can use python, you can get a list of all objects from FreeCAD.ActiveDocument.findObjects()
    168 KB (26,821 words) - 07:28, 3 July 2023
  • Category:Useful
    ...egory:Beautiful|Beautiful]] and [[:Category:Useful|Useful]] stuff like the objects below.
    8 members (0 subcategories, 0 files) - 07:59, 2 January 2015
  • PCB Milling
    ...o you'll have to export your board/object as a PNG image first. For larger objects without very fine features 200-300 dpi is fine, but for circuit boards I us
    38 KB (6,028 words) - 23:58, 25 May 2020
  • Reproid
    SUGGESTION: App Store for reprap? where you can browse for printable objects? Hopefully all open sourced.
    3 KB (540 words) - 21:24, 22 January 2014
  • Elegant multispline motion controller
    Some objects can be dumped to the device. It all depends on the number of curves. A cu
    29 KB (4,689 words) - 15:45, 4 January 2015
  • Arcol.hu Hot-End Version 3.0
    ...chine at all. (and also I dont see a point to have ability to print taller objects on rapman. Or having bigger Z travel)
    9 KB (1,419 words) - 23:38, 13 February 2024
  • RepRapMicron
    In biology and medicine, equipment to measure and manipulate objects on the micron scale are relatively common - though these devices tend to be ...m several angles. These techniques are also useful for observing completed objects.
    13 KB (2,073 words) - 02:46, 4 May 2024
  • Fused filament fabrication
    ...ave a grain like wood. Even when printed with an infill rate of 100%, such objects are not quite as strong (in some directions) as others. Tests show that pri
    2 KB (290 words) - 08:21, 28 February 2019
  • RUG/UK/Southampton
    ...portant for good printing and should be carefully monitored. Here are some objects that I printed.
    4 KB (571 words) - 03:17, 7 May 2012
  • Bed material
    ...non-heated bed. In fact it's probably the worst option I've tried so far. Objects wouldn't stick at all. The only thing it does do is work nicely to clean th
    13 KB (2,190 words) - 22:22, 16 April 2016
  • Gunstrap
    ...ild chamber which has been seen to improve the quality of prints for large objects.
    4 KB (636 words) - 17:19, 22 December 2014
  • Talk:MetalicaRap
    ...ebcam with its infrared filter removed -- and calibrate it using some test objects in the chamber heated to a known temperature?
    14 KB (2,436 words) - 01:24, 19 March 2019
  • User:Bryanandaimee
    ...ithout money", (How much of your quality of life is based on small plastic objects?) but I am constantly being converted to the general usefulness of the 3d p
    12 KB (2,219 words) - 09:17, 7 August 2013
  • IceRap
    |description = 3D Printing Ice Objects Researchers at McGill University have successfully "printed" a variety of objects in ice using a modified a Fab@Home Model 1.
    6 KB (1,033 words) - 05:23, 1 February 2015
  • Harvester
    The scope of the project is to be able to scan and print small objects up to approximately a 10” (reduced from 12" due to availability and choic 1) A moveable platform or base (e.g. turntable) upon which objects can be placed to be photographed from a variety of orientations (i.e. angle
    15 KB (2,423 words) - 08:15, 2 January 2015
  • LogFab
    ...fab is a fabricator to make long, thin objects. A typical logfab can make objects fifteen units long, one unit wide and two units high. ...has a bed length of 90 cm, which is enough to make desks, chairs and other objects of similar size.
    5 KB (792 words) - 20:57, 2 January 2011
  • Exquisite Automated Build Platform
    1) must not be two high as to prevent large objects from being built
    11 KB (1,993 words) - 03:18, 14 February 2024
  • Ideas to place
    ...like large unsupported spans not on the bed, details too small to resolve, objects too close to keep separate.
    13 KB (2,043 words) - 14:27, 14 February 2015
  • RepRap project FAQ/de
    ...ommunity stores various resources and links, like forums, blogs, printable objects.--> <!--The object libraries contains design databases of objects, published and designed.
    28 KB (4,384 words) - 07:40, 23 November 2013
  • ABS HDPE blend
    ...ick to anything other than itself, other forms of [[PE]] and [[PP]]. Large objects also tend to warp. It may be possible to make the base of an object with 10
    3 KB (450 words) - 01:17, 23 March 2015
  • LCD And Keypad for Generation 3
    ...ls (or Mendel variations) or as a demonstration machine with popular small objects such as the whistle, penny bottle opener, screw box, heart box and etcetera ...to drag along a laptop and demonstrate the printer by printing out popular objects.
    4 KB (709 words) - 07:05, 10 January 2015
  • Fjodor
    The project will entail, if possible, an Android capable of constructing objects out of most of the materials found in mass production today, making shops o All fingers are meant to be able to grip objects in addition to their various extruding capabilities.
    6 KB (1,012 words) - 14:48, 25 November 2011
  • User:Jebba
    * Aleph Objects, Inc.
    68 bytes (9 words) - 08:37, 14 July 2013
  • Powder Printer Recipes
    ...er to </span><span lang="en-CA">selectively sinter plastic powder to build objects and there has been a bit of discussion around what to use as a medium. One
    37 KB (5,672 words) - 15:05, 12 June 2021
  • Powder Printer Recipes/zh cn
    ...er to </span><span lang="en-CA">selectively sinter plastic powder to build objects and there has been a bit of discussion around what to use as a medium. One
    35 KB (5,213 words) - 18:01, 27 December 2014
  • IceBot
    ...ced at each corner. These 4 rods will be removable in order to help remove objects from the printer.
    2 KB (347 words) - 06:08, 26 November 2011
  • Talk:Sarrus L04
    I've been looking for a mechanism to suspend light objects that is compact, has linear vertical motion, and offers little or no projec Would this be feasible? For lightweight objects, and relatively small motion, it looks stable enough -- what do you think?
    738 bytes (127 words) - 18:17, 2 April 2011
  • Prusa Mendel Assembly
    ...each time they are told to move. An uncalibrated print can print stretched objects or a messy pile of plastic. It's best to calculate the exact X, Y, Z, and
    49 KB (8,907 words) - 04:18, 14 February 2024
  • Fab@Home
    "The Fab@Home builds objects layer by layer, using any material than can be squeezed through a syringe a
    1 KB (154 words) - 10:43, 29 April 2014
  • Sample reprap proposals
    ...on the machine. Efforts are currently underway to recycle ordinary plastic objects, such as milk jugs, into usable filament. Even utilizing commercially avail
    4 KB (673 words) - 16:46, 24 November 2011
  • Planning and preparing for a build
    ...2010. [[Greg's Hinged Extruder]] has been very popular in 2011. These RP objects are regularly posted on this wiki, http://www.thingiverse.com/, or in devel
    7 KB (1,140 words) - 10:07, 1 December 2015
  • SpacexulaaltMain Page
    ...] [[wikipedia:3D printing|desktop 3D printer]] capable of printing plastic objects. Since many parts of RepRap are made from plastic and RepRap can print thos
    4 KB (549 words) - 04:24, 14 February 2024
  • DevelopmentIndexAnalysis
    ...oncept]]</td><td>''[[#LessThan1YearAgo|< 1 year ago]]''</td><td>[[#Objects|Objects]]</td></tr> ...ntal]]</td><td>''[[#LessThan1MonthAgo|< 1 month ago]]''</td><td>[[#Objects|Objects]]</td></tr>
    325 KB (49,064 words) - 06:16, 11 December 2011
  • User:ProtoNext
    The main objective is to make hollow objects thanks to 2 extruders and a stand material with a Mendel.
    346 bytes (57 words) - 02:39, 20 June 2011
  • Builders/Links and Blogs/Individual Pages/Lake
    ...ent language that the 3d printers use to communicate with the electronics. Objects are sliced into layers, given special instructions on extruder speed, etc.
    26 KB (4,792 words) - 10:51, 28 February 2020
  • The RepRap Object Library/nl
    ; [[Wanted Objects|Gewenste Artefacten]] : Suggesties voor zaken die een RepRap zou kunnen pri
    2 KB (216 words) - 15:29, 4 January 2015
  • RepRap help/nl
    * [[WhatWouldYouMake]] and [[Wanted Objects]] -- build better things with those tools
    3 KB (374 words) - 12:49, 14 July 2014
  • Manual Support
    But strategically placed it can allow you to make objects that are otherwise difficult or save a print that start to move from the be
    10 KB (1,623 words) - 15:46, 4 January 2015
  • User:Lanthan
    * Print small objects without the full surface platform
    21 KB (3,155 words) - 11:23, 19 February 2015
  • Comprehensive search for full strength material printers
    =Objects you'd particularly want to print and the precision and material requirement See main page [[wanted objects]].
    64 KB (10,444 words) - 09:10, 7 August 2013
  • LulzBot/Acrylic Electronics Mounting Plate
    |author = Aleph Objects Inc.
    1 KB (199 words) - 14:11, 30 November 2011
  • Concept multimaterial laser printer
    ...a proof of concept even if it can't print everything (or even any complete objects). ** objects which require certain chemically resistant materials
    140 KB (23,495 words) - 23:10, 30 October 2013
  • Aleph Objects printbed mount
    Keep space for Aleph Objects print-bed mount
    80 bytes (10 words) - 12:40, 25 November 2011
  • Lulzbot/Acrylic Electronics Mounting Plate
    |author = Aleph Objects Inc.
    1 KB (214 words) - 05:07, 15 May 2014
  • RUG/Pennsylvania/State College/RepRap Media Timeline
    '''1984'''; Charles "Chuck" Hull develops a technology to print 3D objects using digital data and terms it "Stereolithography" [http://engineeronadisk ...ummary: The purple printer uses a thin stream of plastic to create various objects. It should be the same size as 3 Xbox 360's and cost the same as 3 of them
    152 KB (22,645 words) - 01:20, 30 August 2019
  • Essay on putting printers in perspective
    ...say a RepRap, you want to know what vitamins it requires, and what sort of objects it can produce, what sort of effect it might have on the world. This approa
    14 KB (2,501 words) - 03:54, 20 March 2020
  • Printrbot
    The Printrbot Plus is a larger version of the Printrbot capable of creating objects up to 8" cubed.
    8 KB (1,247 words) - 20:24, 11 December 2014
  • RUG/Pennsylvania/State College/Software/CAD
    ..._College/CAD/STL| STL Formatting]]: Modifying STL files to import as solid objects in Solidworks
    480 bytes (70 words) - 13:39, 9 December 2013
  • Budaschnozzle
    |author = Aleph Objects, Inc.
    7 KB (1,006 words) - 23:07, 3 December 2014
  • Vertical X Axis Standard Contest
    '''4. Print and post pictures of printed objects'''
    8 KB (1,258 words) - 01:20, 15 December 2011
  • LulzBot
    [http://www.lulzbot.com/ LulzBot] is an Aleph Objects, Inc. Internet store selling materials, hardware, electronics, and tools fo
    2 KB (227 words) - 14:26, 31 May 2013
  • LulzBot/Prusa Mendel
    |author = Aleph Objects
    6 KB (968 words) - 14:10, 30 November 2011
  • Polycarbonate
    * Video's of PC being Extruded and building objects can [http://www.youtube.com/watch?feature=player_embedded&v=_JvBJcemPHM be
    9 KB (1,518 words) - 12:24, 24 August 2016
  • The incomplete RepRap Prusa Mendel beginner's guide
    “RepRap is a free desktop 3D printer capable of printing plastic objects. Since many parts of RepRap are made from plastic and RepRap can print thos #Additional software (to create 3d objects for printing and then adjusting them on printing plate.
    103 KB (16,604 words) - 18:55, 17 October 2020
  • Triffid Hunter's Calibration Guide
    ...harm in making sure! '''If you've calculated this value correctly but your objects come out the wrong size by a noticeable amount, your belts may be damaged o
    18 KB (3,052 words) - 17:02, 31 December 2018
  • RUG/Pennsylvania/State College/Software/Parts/Dual Extruder
    ...versity may become interested in utilizing our services rather than having objects printed commercially.
    26 KB (4,406 words) - 12:40, 6 August 2014
  • Cast then machine printer system concept
    ...h into methods by which to produce full strength objects, especially metal objects, with all the sort of desirable properties that can be obtained with normal Removing the cast from around certain complex objects can only be done by essentially liquefying or gassifying it so the cast in
    8 KB (1,313 words) - 12:12, 7 March 2013
  • 彩色切片软件
    ...ously-loaded objects are not selected when you load a new one (loading new objects attached to previous ones is a special feature for printing in multiple mat ...hey will both be locked together in this relative positioning. Leave both objects selected (and therefore coloured as in the middle picture).
    19 KB (2,766 words) - 02:12, 6 June 2020
  • Coloring filament
    [[File:filament_colorizer_lemio_objects.jpg|200px|thumb|right|Objects printed using Lemio´s filament colorizer]] List of working markers (tested on 1.75mm PLA, used to print objects):
    2 KB (225 words) - 15:57, 4 January 2015
  • Extrusions
    '''Extrusion''' is a process used to create objects of a fixed [[cross section (geometry)|cross-sectional]] profile. A material
    2 KB (275 words) - 08:41, 7 November 2014
  • Prusa Mendel/fr
    ...w.alephobjects.com/hardware/bom/Prusa_Mendel_BOM-20110920.xls Latest Aleph Objects/LulzBot Bill of Materials]
    15 KB (2,199 words) - 18:18, 24 January 2016
  • PrusaBuildNotesBraino
    ...eed to set up. But here are some cool things I found. However, there are objects specifically used for calibration the printer included in the software to b == Looking from STL files for various objects to the G-Codes neede to print the object: ==
    59 KB (9,978 words) - 17:05, 12 April 2015
  • Category:Development/es
    ...solo en una de ellas, usted puede dejar las otras buenas ideas en [[Wanted Objects]] or [[Ideas to place]].
    7 members (6 subcategories, 0 files) - 03:32, 23 August 2017
  • Category:Development/ru
    ...х, вы можете сбросить "лишние" идеи в [[Wanted Objects]] или [[Ideas to place]].
    5 members (5 subcategories, 0 files) - 02:20, 24 May 2023
  • Category:Development/fr
    ...as de problème, vous pouvez déposer les autres bonnes idées à [[Wanted Objects]] ou [[GSoC 2010]]. '' Ce qui devrait probablement être rebaptisé "[[GSoC
    14 members (11 subcategories, 0 files) - 13:35, 2 December 2016
  • Wiki tutorial/de
    ...er Rest ist meist nur noch Feintuning. Hier soll anhand eins "single wall"-Objects ein mögliche Vorgehensweise hierfür beschrieben werden.
    21 KB (3,089 words) - 12:23, 28 July 2014
  • LulzBot/AssembledPrusaMendel
    |author = Aleph Objects, Inc.
    4 KB (624 words) - 20:39, 7 March 2013
  • RUG/Pennsylvania/State College/Software
    ...import and export STL files and works directly with the mesh structure of objects.
    5 KB (728 words) - 10:07, 14 July 2014
  • MiniRecyclebot
    Polypropylene is used to make objects that are resistant to fatigue: boxes, large bottle caps, pipes; also bottle
    5 KB (834 words) - 10:08, 14 August 2012
  • Prusa Mendel Assembly/es
    ...each time they are told to move. An uncalibrated print can print stretched objects or a messy pile of plastic. It's best to calculate the exact X, Y, Z, and
    49 KB (8,765 words) - 12:19, 9 November 2014
  • Huxley PCB Heatbed
    PCB used as heater for build surface. Enables printing of large objects without warping.
    2 KB (306 words) - 08:00, 4 September 2014
  • About/hu
    ...viability of the open source development model for the design of physical objects], November 8th 2010, University of Tilburg, The Netherlands.
    5 KB (857 words) - 09:12, 12 December 2014
  • RepRapPro Huxley frame assembly
    ...r frame is, the better your prints will be when printing large and/or tall objects.
    11 KB (1,950 words) - 11:40, 16 October 2013
  • Prusa Mendel Assembly (iteration 2)
    ...ased Iteration 2, where integrated bushings are included as part of the RP objects. The design officially supports different bearing combinations, including b ...each time they are told to move. An uncalibrated print can print stretched objects or a messy pile of plastic. It's best to calculate the exact X, Y, Z, and
    49 KB (8,761 words) - 13:24, 1 February 2015
  • Prusa Mendel/hu
    ...w.alephobjects.com/hardware/bom/Prusa_Mendel_BOM-20110920.xls Latest Aleph Objects/LulzBot Bill of Materials]
    13 KB (2,018 words) - 04:15, 16 February 2013
  • A RepRap tárgykönyvtár
    ; [[Wanted Objects|Kívánt tárgyak]] : Javaslatok dolgokra, ami a RepRap-nek hasznos lehet.
    2 KB (246 words) - 15:34, 4 January 2015
  • Lemon Curry
    ...a UV output, it is able to create incredibly thin polymer layers and build objects layer by layer. The initial design will have movement for building vat grow
    3 KB (424 words) - 22:22, 26 February 2013
  • User:Johnduhart/Testing
    ...] [[wikipedia:3D printing|desktop 3D printer]] capable of printing plastic objects. Since many parts of RepRap are made from plastic and RepRap can print thos ...ht:bold;size=+5px">[[About]] | [[The RepRap Object Library|RepRappable Objects]] | [[Community portal|Community]] | [[RepRap help|Help and support
    5 KB (690 words) - 13:02, 14 July 2014
  • File:Alephplate.jpg
    Image of Aluminium Bed Mount Plate from thingiverse item# 10754 by Aleph Objects
    (800 × 535 (25 KB)) - 10:33, 6 January 2012
  • Galileo
    * Print the objects in view
    14 KB (2,334 words) - 13:22, 22 October 2013
  • User talk:Spacexula try
    ...] [[wikipedia:3D printing|desktop 3D printer]] capable of printing plastic objects. Since many parts of RepRap are made from plastic and RepRap can print thos ...ht:bold;size=+5px">[[About]] | [[The RepRap Object Library|RepRappable Objects]] | [[Community portal|Community]] | [[RepRap help|Help and support
    6 KB (877 words) - 13:02, 14 July 2014
  • Teacup Firmware/fr
    remote: Counting objects: 1680, done. remote: Compressing objects: 100% (639/639), done.
    21 KB (3,521 words) - 18:50, 9 July 2013
  • Calibration/fr
    ...immediately got nice looking prints. However, and here is the kicker, the objects are all slightly too big because my single wall box has an actual w/t of 2. ...hen i get thin preimeters and they dont alway bond well to each other (but objects are the right size).
    30 KB (4,863 words) - 16:39, 31 March 2020
  • RepRapPro Huxley improvements
    ...s can increase print accuracy, especially when printing circular or curved objects. This will only be true if the metal pulley's bore is more concentric to it
    4 KB (693 words) - 05:25, 21 May 2014
  • RUG/Pennsylvania/State College/Printers/PSU Unit Mondo
    ...as yet to be attempted. One of benefits of the Mondo is it can print large objects, wide, long and tall. Attempt a large print to see how the Mondo deals with
    4 KB (659 words) - 01:58, 5 December 2013
  • Talk:The RepRap Object Library
    ..., it should be no problem compiling a "Library" / List of some cool sample Objects with a link to the original page, Author, download etc. We could even compi
    536 bytes (94 words) - 07:39, 10 February 2012
  • Budaschnozzle/1.0
    |author = Aleph Objects, Inc.
    9 KB (1,013 words) - 06:42, 10 August 2014
  • Chocolate Extrusion
    ...ape which it retains until solidifying, making it a candidate for building objects with a FDM-like process. ...it was dropped into for some time. This makes it possible to build actual objects from extruded chocolate.
    2 KB (361 words) - 12:03, 18 March 2012
  • Main Page/Sandbox AdrianKelly
    ...] [[wikipedia:3D printing|desktop 3d printer]] capable of printing plastic objects. Since a large part of the RepRap is made of this same plastic the RepRap c ..."font-weight:bold;">[[About]] | [[The RepRap Object Library|RepRapable Objects]] | [[Community portal|Community]] | [[RepRap help|Help and support
    3 KB (482 words) - 13:02, 14 July 2014
  • User talk:GreenAtol
    I've left a question at [[Talk:Wanted Objects]] that perhaps you could answer.
    282 bytes (42 words) - 20:02, 4 March 2012
  • Hugo
    ...ck the quality of your prints. It has the main difficulties of the printed objects in one part.
    8 KB (1,069 words) - 16:28, 12 September 2016
  • User:Nop5031
    ...he school for the students to use. The students enjoy being able to create objects and compete with friends on the most decorative designs with the only compl ...which prevented the fruition of some really great ideas. In the past, many objects were made via mold manufacturing, casting and machining which can prohibit
    11 KB (1,860 words) - 07:56, 1 February 2013
  • Apparently Connected Favorite Calibration Objects
    ...in the [[RepRapSoftwareTweakingManual]] where you need to print some test objects. ...building our first printers was the difficulty in finding good calibration objects. I'm not talking about the tower and the box. I'm talking about items that
    3 KB (557 words) - 16:19, 28 November 2014
  • Sketchup Modeling for 3d Printing
    -Shift select is a +/- select, you you can select multiple objects/faces/edges.
    5 KB (905 words) - 04:32, 9 May 2015
  • MetalicaRap:old info
    SMPS insulators ( ensure G code objects have solid walls in nylon) [[File: Nylon1 elements of smps assembly v1p00.s
    30 KB (4,629 words) - 05:17, 7 September 2016
  • FreeCAD
    ...;dr''': <br>Do you wonder how to design & create [[Wanted_Objects|useful]] objects of your own, but think [[OpenSCAD]] has a too steep learning curve and [[Wi
    5 KB (789 words) - 06:36, 11 January 2015
  • Mendel User Manual/fr
    ...Main/MultipleMaterialsFiles RFO file format] - Saving and loading multiple objects on RepRap's build base.
    2 KB (305 words) - 16:00, 14 November 2013
  • Budaschnozzle/nl
    |author = Aleph Objects, Inc.
    9 KB (1,000 words) - 06:51, 10 August 2014
  • Portabee
    ...or pull off the hardened filament with your fingernails. Do not use sharp objects to scrape off the hardened filament, because this can damage the precisely- ...xis is removable and hence may shift slightly when you use force to remove objects stuck to the print bed. Therefore, it is recommended to level the print bed
    84 KB (14,171 words) - 06:48, 19 February 2023
  • Prusa Mendel thereprapkitstore
    You can download 3d objects on [http://www.thingiverse.com thingiverse] ....org blender] and make your own things :-) (Set the center of your blender objects to x,y = 100,100 and the bottem to z=0 and export to .stl or .obj)
    8 KB (1,242 words) - 12:52, 26 November 2014
  • Maureen
    ...ons are: removing and UV filters and allow the projector to focus on close objects.
    7 KB (1,135 words) - 12:43, 23 May 2014
  • OpenSCAD
    ...rg/wiki/Free_software free software] application for creating solid 3D CAD objects. It is not an interactive modeler, but rather a 3D-compiler. OpenSCAD read ...oop works in OpenSCAD with the CSG toolset, so you can union or difference objects generated by for loops to create complex structures. (You can use intersect
    23 KB (3,679 words) - 14:10, 5 April 2023
  • User talk:Ank5133
    ...developed arms to use their limbs normally. They can feed themselves, lift objects, and perform other less trenuous activities in a similar way to someone wit ==The Impact of 3D Printed Objects on Handcuffs and Security==
    62 KB (10,244 words) - 09:54, 30 April 2013
  • G-code/es
    ...rol panel. The response comprises a single JSON object, with no nesting of objects or arrays. It is similar to the object returned by the web interface status
    139 KB (17,612 words) - 06:18, 9 February 2024
  • User:Avl5279/Blog
    ==Examining My 1st Post Objects== Licensing Non-Copyrightable Objects
    40 KB (6,976 words) - 22:01, 30 January 2014
  • User:Amfanelli/Blog
    For this blog entry, we were to browse the printable objects that people have actually printed on [http://www.thingiverse.com thingivers When scrolling through the various printable objects on thingiverse this one really caught my eye. Most people have seen the pa
    48 KB (8,309 words) - 11:38, 2 May 2014
  • Rostock
    ...l smooth rods are orthogonal to the bottom plywood, otherwise your printed objects will be slightly skewed. ...el: 200 mm + 200 mm = 400 mm carriage travel required if you want to print objects up to 200 mm tall.
    11 KB (1,862 words) - 04:25, 21 October 2016
  • Printing with Wood
    I want to print wooden objects. I make kinetic sculptures in wood and am really excited at the potential o
    8 KB (1,491 words) - 10:49, 28 November 2014
  • Mix g1
    ...as 0.17mm(can't even see the layers). You can check the picture of printed objects at http://blog.mixshop.com/tagged/mix-g1-printing.
    9 KB (1,411 words) - 23:50, 1 February 2024
  • Coloring filament/fr
    [[File:filament_colorizer_lemio_objects.jpg|200px|thumb|right|Objects printed using Lemio´s filament colorizer]]
    2 KB (268 words) - 15:36, 4 January 2015
  • User:Afs2015
    ..."Write a 12 Times New Roman font double-spaced paper on potential everyday objects that can be replicated 3D printing and why or why not that would be a viabl ...make are no longer just visual representations on a pixel screen but real objects one can interact with.
    21 KB (3,391 words) - 00:46, 12 December 2012
  • User:Atk5083
    ...ven if the idea of printing toys does not catch on, the printing of active objects will give good credibility to the 3d printing community. If it is a cheap a
    27 KB (4,767 words) - 01:10, 12 December 2012
  • User:Malcat
    ...iping. Also we need to make our printers more precise to be able to print objects are this quality. Any objects that can cause harm to yourself or others might attact similar attention.
    17 KB (2,989 words) - 18:19, 10 December 2012
  • User talk:Atk5083
    ...d you see someone becoming well known for releasing good designs of useful objects? Could be, and yes I am sure that if someone released good design of useful objects (like Steve Jobs even though his designs were not free) the general populat
    2 KB (290 words) - 15:23, 27 September 2012
  • User:Bac5244
    ...much mor about 3D printing in general as well as other methods of creating objects layer by layer. ...company just received a patent for printers to be able to determine what objects are legal to print. First of all, I'm surprised that something like this wo
    41 KB (7,129 words) - 19:54, 10 July 2013
  • User:Ajo5115
    ...it would give me some piece of mind knowing that I can pursue making large objects without the fear of wasting the filament. Additionally, the OHM model has u ...ent "cartridges" similar to a 2D printer. They offer a store-type model of objects, which you may either have shipped to you as a finished product or BUY this
    25 KB (4,200 words) - 07:58, 1 February 2013
  • User:Jms6579
    ...n parallel: a plastic printer, then a metal printer, and so forth, so that objects containing multiple materials can be automatically printed. ...erable harmless objects, or it will be trivial to defeat by disguising the objects beyond the system's ability to recognize them)." I really don't think ther
    44 KB (7,553 words) - 20:52, 13 December 2012
  • User:Gtk5020
    ...plate that’s basically one giant touch sensor, and use it to manipulate objects on a screen by touching a sliding. Kind of like an iPod touch screen but wi ...or having objects. Wealth without money simple means you can get a lot of objects without money.
    22 KB (3,874 words) - 16:03, 11 December 2012
  • User:Axs5327
    ...hese models are smaller and they just inject filament, not complex plastic objects. The more useful machine should be able to both grind and then mold the pla ..., which is creating real objects. In my case we focused on the creation of objects used for building new printers and learning how a printer works in every de
    40 KB (6,874 words) - 07:46, 1 February 2013
  • User:Dgs5101
    ...ters care getting closer and closer to having near perfect finishes on the objects they print. The article backs this up completely saying that the best print ...tion. One thing that could be possible would be 3D printing drug smuggling objects that appear to be sealed on all sides but were stuffed with drugs during th
    32 KB (5,784 words) - 19:08, 12 December 2012
  • User:Jsm5321
    ...educe the number of steps and the cost involved with printing more complex objects, making these printers more accessible in educational settings, many of whi ...reas will be learning in just a short time. Being able to bring models and objects into the students learning environment will only benefit the students beca
    38 KB (6,304 words) - 03:01, 12 December 2012
  • User:Kpb5069
    ...artistic/beautiful 3. pointless/useless 4. funny 5. weird. Link to the 5 objects you’ve chosen, and discuss why you consider them well described by the 5
    41 KB (7,008 words) - 01:10, 13 December 2012
  • User:Maria P
    ...has what information, designs, and technologies to create weapons or other objects. The laws that would form around this would have to be very specific, or co ...o post virtual 3D designs they made. From these digital designs, real life objects can be made using 3D printers. Similar to the rest of the RepRap resources,
    15 KB (2,513 words) - 10:05, 15 October 2012
  • User:Stormyzim
    ...see printers being used to customize all parts of one's life, as we use 3D objects all the time. We can also print conductive materials to make circuit boards ...s of the same object? If 3D printing became both insanely popular AND most objects had DRM restrictions, I could see a black market forming for products like
    17 KB (3,003 words) - 23:12, 12 December 2012

View (previous 250 | next 250) (20 | 50 | 100 | 250 | 500)

Retrieved from "https://reprap.org/wiki/Special:Search"