Search results
Create the page "$1" on this wiki! See also the search results found.
Page title matches
File:Cyclone-v1 sample PCBs 1 by Samuel Kranz.jpg (1,200 × 1,600 (230 KB)) - 21:30, 18 January 2014- = Arduino Breakout Shield v1.1 = * [http://parts.reprap.org/part/module/Arduino+Breakout+v1.1 Buy the components with ease w/ parts.reprap.org]...6 KB (794 words) - 13:59, 25 November 2011
- You can [http://downloads.sourceforge.net/reprap/reprap-arduino-breakout-1.2.zip?modtime=1206561051&big_mirror=0 download the electronics files from S7 KB (884 words) - 13:59, 25 November 2011
- Version 1.3 adds an extra row of power/ground screw terminals. You can [http://downloads.sourceforge.net/reprap/reprap-arduino-breakout-1.2.zip?modtime=1206561051&big_mirror=0 download the electronics files from S5 KB (666 words) - 13:59, 25 November 2011
- Version 1.4 fixes a potential short problem, and adds additional female headers to al .../superb-east.dl.sourceforge.net/sourceforge/reprap/reprap-arduino-breakout-1.4.zip download the electronics files from Sourceforge].7 KB (876 words) - 14:00, 25 November 2011
- #REDIRECT [[Arduino Breakout v1.1]]35 bytes (4 words) - 04:59, 25 July 2015
- 35 bytes (4 words) - 05:00, 25 July 2015
- 35 bytes (4 words) - 05:00, 25 July 2015
- Version 1.4 fixes a potential short problem, and adds additional female headers to al .../superb-east.dl.sourceforge.net/sourceforge/reprap/reprap-arduino-breakout-1.4.zip download the electronics files from Sourceforge].7 KB (1,003 words) - 12:13, 7 March 2013
- {{Deprecated | DC Motor Driver 1 1}} ...et/project/downloading.php?group_id=159590&filename=reprap-dc-motor-driver-1.0-r1.zip download the release file] from SourceForge that has a bunch of he16 KB (2,496 words) - 10:31, 8 June 2013
- You can [http://downloads.sourceforge.net/reprap/reprap-dc-motor-driver-1.1.zip?use_mirror=osdn download the release file] from SourceForge that has a {| border="1"17 KB (2,658 words) - 13:05, 24 June 2014
File:DC Motor Driver 1 1-dsc04621.jpg (500 × 375 (95 KB)) - 06:35, 17 March 2010File:DC Motor Driver 1 1-dsc04622.jpg (500 × 375 (93 KB)) - 06:35, 17 March 2010File:DC Motor Driver 1 1-dsc04623.jpg (500 × 375 (95 KB)) - 06:35, 17 March 2010File:DC Motor Driver 1 1-dsc04624.jpg (500 × 375 (91 KB)) - 06:35, 17 March 2010File:DC Motor Driver 1 1-dsc04626.jpg (500 × 375 (88 KB)) - 06:36, 17 March 2010File:DC Motor Driver 1 1-dsc04627.jpg (500 × 375 (88 KB)) - 06:36, 17 March 2010File:DC Motor Driver 1 1-dsc04628.jpg (500 × 375 (88 KB)) - 06:36, 17 March 2010- 62 bytes (7 words) - 04:46, 25 July 2015
File:DarwinPowerAndCommunicationsCard 1 2-powercomms-annotated.jpg (500 × 375 (68 KB)) - 06:41, 17 March 2010File:DarwinStepperController 1 2-stepper-controller-closeup.jpg (500 × 375 (66 KB)) - 06:42, 17 March 2010File:ExtruderImprovementsAndAlternatives-v-simple-1-small.jpg simp 1(484 × 464 (189 KB)) - 06:49, 17 March 2010- = Extruder Controller v2.1 = The reset button on the Extruder Controller v2.1 board is broken. If you have this board, you will need to manually reset i31 KB (5,027 words) - 20:19, 26 November 2011
- 39 bytes (5 words) - 04:58, 25 July 2015
- 35 bytes (4 words) - 04:59, 25 July 2015
- = Generation 1 Electronics = [[Category:Generation 1 electronics| ]]4 KB (659 words) - 15:27, 23 July 2015
- [[Category:Generation 1 firmware| ]]868 bytes (109 words) - 15:18, 28 August 2015
File:ItemsMade-gear-train-2-1-7.jpg (320 × 240 (10 KB)) - 07:02, 17 March 2010File:ItemsMade-vik-shot-detail-13-1-2007.jpg (502 × 388 (105 KB)) - 07:02, 17 March 2010File:ItemsMade-wades-parts-1-small.JPG (725 × 404 (208 KB)) - 07:02, 17 March 2010- 63 bytes (7 words) - 17:31, 28 November 2011
- ...f component specifications work: #10-24 x 3/4" screws, 3/4" x 3/4" rails, 1/4" acrylic, etc.4 KB (673 words) - 11:46, 28 November 2012
- = McWire Cartesian Bot v1.1 =487 bytes (49 words) - 17:48, 28 November 2011
- * [http://downloads.sourceforge.net/reprap/reprap-mcwire-cartesian-bot-1.2.1.zip?modtime=1200886076&big_mirror=0 Download the files from SourceForge]. ...the supports pictured are 1/16" thickness. It's highly recommended to use 1/8" thickness from McMaster.com'''37 KB (6,065 words) - 05:11, 8 September 2013
- 131 bytes (13 words) - 20:17, 26 November 2011
- = Motherboard v1.1 = See [http://objects.reprap.org/wiki/Hacks_to_the_RepRap_Motherboard_v1.1 here in the Builder's Wiki] for hacks to this board.26 KB (4,326 words) - 20:17, 26 November 2011
File:Motherboard 1 2-back-small.jpg (441 × 410 (141 KB)) - 07:11, 17 March 2010File:Motherboard 1 2-front-small.jpg (473 × 431 (205 KB)) - 07:11, 17 March 2010File:Motherboard 1 2-motherboard-labelled-small.jpg (522 × 464 (235 KB)) - 07:11, 17 March 2010File:Motherboard 1 2-motherboard-modified-small.jpg (522 × 464 (234 KB)) - 07:11, 17 March 2010- 32 bytes (4 words) - 04:57, 25 July 2015
- #REDIRECT [[Talk:Arduino Breakout v1.1]]40 bytes (5 words) - 04:59, 25 July 2015
- ...oject/downloading.php?group_id=159590&filename=reprap-freeduino-pwm-driver-1.0.zip download the release file] from SourceForge that has a bunch of helpf {| border="1"14 KB (2,230 words) - 20:21, 26 November 2011
- = PWM Driver v1.1 = # [http://store.makerbot.com/electronics/electronics-kits/pwm-driver-v1-1-kit.html Buy the full kit (components + PCB) from MakerBot Industries]15 KB (2,310 words) - 10:17, 15 July 2012
File:PowerCommsBoard 1 3-comms and power distribution-sch.jpg PowerComms 1.3.0 2007-08-19 schematic as JPG(792 × 612 (32 KB)) - 07:31, 17 March 2010File:PowerCommsBoard 1 3-comms and power distribution-sch.pdf PowerComms 1.3.0 2007-08-19 schematic as PDF(23 KB) - 07:31, 17 March 2010- The spatial wavelength is about 1/8", so you could make a handy position sensor or linear stepper out of it.17 KB (2,710 words) - 17:33, 16 May 2016
File:RepRapServo 1 0-AS5040 datasheet.pdf (654 KB) - 07:47, 17 March 2010File:RepRapServo 1 0-cyons1001 8.pdf (1.07 MB) - 07:47, 17 March 2010File:RepRapServo 1 0-msfeedback.jpg (729 × 189 (32 KB)) - 07:47, 17 March 2010- 29 bytes (2 words) - 02:16, 25 September 2010
- 31 bytes (2 words) - 22:30, 11 November 2010
File:Screw-drivenLinearAxis-Carriage 1 of.stl (1.87 MB) - 07:51, 17 March 2010File:Screw-drivenLinearStage-Stage base 1 of.stl STL File for base of stage. Make 1.(438 KB) - 07:52, 17 March 2010File:Screw-drivenLinearStage-stage linkage 1 of.stl STL file for Stage/table linkage. Make 1. (Same model as linear axis)(40 KB) - 07:52, 17 March 2010File:Screw-drivenLinearStage-stage table 1 of.stl STL File for stage table. Make 1. Large part (120x105mm approx)(410 KB) - 07:52, 17 March 2010- #REDIRECT [[Motherboard 1.2]]29 bytes (2 words) - 13:39, 17 March 2010
- 368 bytes (49 words) - 20:05, 26 November 2011
File:Stepper Motor Driver 1 1-arduino-stepper-hack.jpg (612 × 683 (212 KB)) - 07:58, 17 March 2010- 45 bytes (5 words) - 04:54, 25 July 2015
- = The Paste Extruder Version 0.1 = ...(furthest from the solenoid) with the broader part of the connector (pins 1 through 8) at the bottom (nearest the solenoid).13 KB (2,301 words) - 08:06, 4 May 2013
File:SupportExtruder 1 0-aoi-image.jpg (800 × 600 (130 KB)) - 08:02, 17 March 2010File:SupportExtruder 1 0-balloon-fitted.jpg (630 × 291 (149 KB)) - 08:02, 17 March 2010File:SupportExtruder 1 0-balloon-holder-1.jpg (728 × 259 (168 KB)) - 08:02, 17 March 2010File:SupportExtruder 1 0-balloon-holder.png (660 × 503 (8 KB)) - 08:02, 17 March 2010File:SupportExtruder 1 0-balloon-support.png (659 × 261 (2 KB)) - 08:02, 17 March 2010File:SupportExtruder 1 0-base-pipe-support.jpg (399 × 441 (145 KB)) - 08:02, 17 March 2010File:SupportExtruder 1 0-before-cast-small.jpg (399 × 395 (143 KB)) - 08:02, 17 March 2010File:SupportExtruder 1 0-bottle-complete.jpg (616 × 419 (180 KB)) - 08:02, 17 March 2010File:SupportExtruder 1 0-bottle-top-fitted.jpg (268 × 263 (65 KB)) - 08:02, 17 March 2010File:SupportExtruder 1 0-d-connector.jpg (455 × 447 (155 KB)) - 08:02, 17 March 2010File:SupportExtruder 1 0-final-assembly.jpg (926 × 668 (435 KB)) - 08:02, 17 March 2010File:SupportExtruder 1 0-finished-extruder-small.jpg (334 × 721 (135 KB)) - 08:02, 17 March 2010File:SupportExtruder 1 0-finished-extruder.jpg (1,012 × 2,184 (594 KB)) - 08:02, 17 March 2010File:SupportExtruder 1 0-mould-making-small.jpg (431 × 398 (151 KB)) - 08:02, 17 March 2010File:SupportExtruder 1 0-nozzle-fitted.jpg (593 × 377 (169 KB)) - 08:02, 17 March 2010File:SupportExtruder 1 0-nozzle-pipe-assembly.jpg (406 × 235 (92 KB)) - 08:02, 17 March 2010File:SupportExtruder 1 0-nozzle-union.png (400 × 300 (2 KB)) - 08:02, 17 March 2010File:SupportExtruder 1 0-result-small.jpg (534 × 376 (171 KB)) - 08:02, 17 March 2010File:SupportExtruder 1 0-rp-blanks-small.jpg (282 × 378 (96 KB)) - 08:02, 17 March 2010File:SupportExtruder 1 0-solenoid-fitted.jpg (495 × 411 (161 KB)) - 08:02, 17 March 2010File:SupportExtruder 1 0-solenoid.jpg (577 × 392 (189 KB)) - 08:02, 17 March 2010- 37 bytes (4 words) - 05:23, 25 July 2015
- #REDIRECT [[Temperature Sensor v1.1]]37 bytes (4 words) - 05:22, 25 July 2015
- = Thermocouple Sensor v1.1 = * Make tracks to/from Pin 1/14 to thermocouple fatter234 bytes (32 words) - 19:38, 26 November 2011
File:UniversalControllerBoard 1 2-grtg V12 bodge.jpg (400 × 248 (38 KB)) - 08:15, 17 March 2010File:UniversalControllerBoard 1 3-universal-sch.jpg UCB 1.3.0 Schematic 2007-08-19 as .JPG file(792 × 612 (51 KB)) - 08:16, 17 March 2010File:UniversalControllerBoard 1 3-universal-sch.pdf UCB 1.3.0 schematic 2007-08-19 as PDF(38 KB) - 08:16, 17 March 2010- #REDIRECT [[OptoEndstop 2.1]]29 bytes (2 words) - 13:41, 17 March 2010
- 38 bytes (4 words) - 05:19, 25 July 2015
- 42 bytes (5 words) - 05:20, 25 July 2015
- #REDIRECT [[Stepper Motor Driver 2.1]]38 bytes (4 words) - 16:16, 17 March 2010
- #REDIRECT [[Stepper Motor Driver 1.2]]38 bytes (4 words) - 16:17, 17 March 2010
- #REDIRECT [[Stepper Motor Driver 1.0]]38 bytes (4 words) - 16:19, 17 March 2010
- 48 bytes (6 words) - 04:50, 25 July 2015
File:1-4inLaserCutSheet.zip (90 KB) - 06:35, 15 January 2015File:1-8inLaserCutSheet.zip (32 KB) - 06:35, 15 January 2015File:1-4in.svg (2,160 × 1,620 (136 KB)) - 19:04, 24 April 2010File:Delta Prototype 1 upside down.jpg (3,264 × 2,448 (600 KB)) - 16:55, 16 May 2010- |name = Compliant Linear Motion Mechanism 1 y = (1 / E / I) * ( Pmax*x.^3 / 6 - Pmax*L*x.^2 / 4 );9 KB (1,420 words) - 05:25, 8 September 2013
File:Coil 1 TZstepper.JPG (1,024 × 768 (76 KB)) - 04:55, 28 May 2010- #REDIRECT [[Stepper Motor Driver 1.1]]38 bytes (4 words) - 22:10, 6 June 2010
- #REDIRECT [[McWire Cartesian Bot 1 2 (Death March: Do not build!!!)]]69 bytes (9 words) - 03:57, 20 November 2010
File:Glass nozzle 1 side view.png (320 × 240 (121 KB)) - 18:05, 1 August 2010File:TB6560-Signal waveform and timing-1-02.jpg (286 × 213 (38 KB)) - 04:32, 2 August 2010File:Blunt nosedP 1 5mm glass nozzle filament 3.jpeg (628 × 469 (29 KB)) - 23:47, 3 September 2010- 1) More than 3 stepper axes. 7 should be a minimum 9) Memory storage. 1 GB should be a minimum11 KB (1,809 words) - 10:04, 26 November 2011
File:RAMPS-1-2-1-Grogyan.zip (519 KB) - 00:50, 22 February 2011File:MetalicaRap vers1 1 of 9.jpg (842 × 595 (179 KB)) - 17:48, 2 March 2011File:Sanguinololu 1.0 Build 1. flux the pads.JPG (1,600 × 905 (416 KB)) - 00:49, 14 April 2011File:Prototipo (1).jpg (800 × 600 (75 KB)) - 07:59, 2 October 2015File:Electrochemical Machining Results Series 1 Explained.jpeg (500 × 667 (49 KB)) - 10:39, 8 May 2011File:Sanguinololu Board v1 1 modded to v1 2.pdf ...ts and wire additions required to create a v1.2 compatible board from a v1.1 PCB.(356 KB) - 10:54, 12 September 2011File:RAMPS1-3 1-8k.JPG (888 × 592 (188 KB)) - 18:07, 25 September 2011File:MrKim Sarik Printable Transistors part1-v1.3-1 2.jpg (1,120 × 1,000 (356 KB)) - 11:59, 21 September 2011File:Imagen 1 B.jpg (640 × 480 (97 KB)) - 19:28, 16 October 2011File:Imagen 1 D.jpg (640 × 480 (94 KB)) - 19:28, 16 October 2011- {{Languages|:Category:Generation 1 electronics}}15 members (1 subcategory, 0 files) - 04:49, 25 July 2015
File:Reprappro-huxley-idler-split-1-300x204.png (300 × 204 (50 KB)) - 12:44, 11 December 2011File:Reprappro-huxley-section-1-components.jpg (2,576 × 1,932 (558 KB)) - 08:46, 13 September 2012File:Reprappro-huxley-section-1-assembled.jpg (3,264 × 2,448 (3.16 MB)) - 19:20, 18 June 2012File:Reprappro-huxley-section-1-sliding.jpg (2,312 × 2,271 (612 KB)) - 10:09, 27 March 2013File:Reprappro-huxley-x-stage-1-complete.jpg (3,648 × 2,736 (3.64 MB)) - 10:51, 27 March 2013File:Reprappro-huxley-x-stage-1-components.jpg (3,264 × 2,448 (3.15 MB)) - 04:00, 19 June 2012File:H-1 Assembly Diagrams Complete.zip All of the H-1 assembly diagram pdf's zipped up in to one file for downloading(1.25 MB) - 10:53, 7 January 2012File:Budaschnozzle1-1 001.jpg (1,024 × 678 (54 KB)) - 16:36, 9 February 2012File:SeeMeCNC H-1 Printer settings(1).jpg SeeMeCNC H-1 Repetier Printer Settings #1(505 × 476 (71 KB)) - 21:59, 28 February 2012File:SeeMeCNC H-1 Printer settings(2).jpg SeeMeCNC H-1 Repetier Printer Settings #2(505 × 476 (63 KB)) - 00:02, 8 March 2012File:SeeMeCNC H-1 Printer settings(3).jpg SeeMeCNC H-1 Repetier Printer Settings #3(505 × 476 (47 KB)) - 00:02, 8 March 2012File:SeeMeCNC H-1 Slic3r settings(1).jpg SeeMeCNC H-1 Repetier Slic3r Settings #1(720 × 595 (92 KB)) - 00:03, 8 March 2012File:SeeMeCNC H-1 Slic3r settings(2).jpg (720 × 595 (90 KB)) - 00:04, 8 March 2012File:Sanguinololucoll2(1).jpg (500 × 373 (112 KB)) - 05:28, 3 May 2012File:Absprusa - zy 1 checking width zoom.jpg (1,024 × 768 (76 KB)) - 16:31, 10 June 2012File:Absprusa - zy 1 checking width.jpg (1,229 × 922 (155 KB)) - 16:32, 10 June 2012File:Reprappro-huxley-section-1-assembled-b.jpg (3,264 × 2,448 (3.45 MB)) - 19:25, 18 June 2012File:Reprappro-huxley-section-1-assembled-c.jpg (3,264 × 2,448 (2.91 MB)) - 19:26, 18 June 2012File:Plate base 1 pp.zip (2 KB) - 03:53, 16 August 2012File:Base part 1 pp.zip (4 KB) - 07:07, 20 January 2015- 293 bytes (9 words) - 02:29, 22 December 2012
- ...бласти печати: 200 мм x 200 мм x 100 мм (8.2" x 8.2" x 4.1") {| class="wikitable sortable" border="1"15 KB (540 words) - 02:29, 22 December 2012
File:Foldarap frame XZ 1-5.gif (600 × 441 (31 KB)) - 11:01, 20 August 2012File:Megatronics 1 0.sch (318 KB) - 04:29, 21 August 2012File:Megatronics 1 0.pcb (944 KB) - 04:29, 21 August 2012File:Megatronics 1 0 sch.pdf (310 KB) - 04:29, 21 August 2012File:Megatronics 1 0 pcb.pdf (197 KB) - 04:29, 21 August 2012- * Printing Size: 200mm x 200mm x 100mm (8.2" x 8.2" x 4.1") {| class="wikitable sortable" border="1"8 KB (1,140 words) - 11:06, 15 September 2012
File:Clon-Deathstar 2012-01-07 1-r2.jpg (1,410 × 1,161 (544 KB)) - 07:01, 26 January 2015- MAF-1 es la primera impresora 3D modelo "Mosaic" del proyecto Clones Wars. (Sigo * '''Nombre''': '''<font color="#0000FF">MAF-1</font>'''2 KB (304 words) - 11:33, 12 October 2012
File:Halcon Milenario 1 Piezas.jpg (2,592 × 1,944 (809 KB)) - 16:03, 27 October 2012File:Foto(1).JPG (2,592 × 1,936 (1.74 MB)) - 08:36, 22 November 2012File:Base Plate(1).jpg (2,592 × 1,944 (1.41 MB)) - 05:58, 15 December 2012- 1. useful: http://www.thingiverse.com/thing:437622 KB (305 words) - 22:27, 21 January 2013
File:Rambo1-1-schematic.png (3,146 × 2,204 (258 KB)) - 09:23, 22 February 2014- This page is relative to an older revision - 1.0. Image:rambo1-0top.png|Top/1<small><sup>st</sup></small> copper layer591 bytes (93 words) - 10:30, 28 November 2014
File:1-2inch-birch-CARG-compliant-2.jpg 1/2in CARB compliant birch plywood(4,288 × 2,848 (5.02 MB)) - 21:20, 3 February 2013File:Leo 1,75.JPG LeoNozzle para filamento de 1.75 mm.(564 × 564 (41 KB)) - 11:56, 14 July 2014File:Ferite Core with 3Dprinted Nylon Insulator and 1 of 187 secondary pcbs in place.jpg (1,280 × 800 (119 KB)) - 04:36, 16 April 2013File:Creative-diy-ideas-1-1.jpeg (605 × 685 (77 KB)) - 23:05, 16 April 2013File:Endstop-holder microsw-1 small enstops 3off.jpg (844 × 496 (46 KB)) - 21:19, 18 April 2013File:2-Flute-Carbide-End-Mill-1 tn200.jpg (200 × 200 (3 KB)) - 19:02, 20 April 2013File:Solo Impressio AAG i3 1-14 SmallGearMod Thumb.jpg (400 × 300 (39 KB)) - 07:22, 2 August 2013File:Sanguinololu-1 3a-usb5v-isolation.jpg For Sanguinololu 1.3a: Cut this trace to stop the printer 5V from backfeeding to the host PC w(227 × 246 (31 KB)) - 11:28, 2 August 2013File:Render 1 preview featured.jpg (690 × 518 (29 KB)) - 17:30, 11 December 2013File:Xmount ver 1 fail.JPG (336 × 438 (49 KB)) - 05:31, 18 October 2013File:R20130617062749 (1).jpg (1,000 × 492 (174 KB)) - 10:05, 19 October 2013File:Photo(1).JPG (480 × 640 (137 KB)) - 19:38, 2 November 2014File:Lathe Mag-joints (1).jpg (2,048 × 1,536 (570 KB)) - 05:57, 28 October 2013File:ImpPro3D Carte electronique 1 moteur.jpg (1,600 × 1,200 (307 KB)) - 06:38, 1 November 2013- ...dle2.jpg|link=RUG/Pennsylvania/State_College/Printers/PSU_Unit_Solidoodle_#1|25px|alt=Silver]] </includeonly> This page contains information about the PSU Unit Solidoodle #1 3D printer.856 bytes (108 words) - 11:17, 27 October 2014
- This page contains information about the PSU Unit Prusa i3 #1 3D printer.884 bytes (124 words) - 11:18, 27 October 2014
File:Armado v1.2 (1).JPG (2,848 × 2,134 (1.72 MB)) - 18:16, 13 January 2014File:Cyclone milling plexiglass 1 byMartinZabojnik.jpg (1,074 × 834 (156 KB)) - 13:21, 20 January 2014File:Smps 1KV & 63KV assembly scale 1 to 1 with pcb.FCStd.tar.gz (10.3 MB) - 17:36, 21 June 2014File:Electrónica-Paso 1 A.png (3,521 × 2,843 (2.2 MB)) - 12:29, 27 May 2014File:Electrónica-Paso 1 B.png (2,587 × 1,979 (2.37 MB)) - 12:30, 27 May 2014File:Electrónica-Paso 1 D.png (1,948 × 2,134 (3.14 MB)) - 12:30, 27 May 2014File:SOMOS 1 a.jpg (2,688 × 2,782 (1.87 MB)) - 13:27, 27 March 2014File:10 1 tip1.jpg (550 × 472 (58 KB)) - 16:40, 2 April 2014File:10 1 tip4.jpg (550 × 497 (94 KB)) - 16:45, 2 April 2014File:PLA3MM1KBLK 1-950x350.jpg (950 × 350 (78 KB)) - 12:42, 17 April 2014File:5287 10 3d printer buyers guide part 1 what makes up a 3d printer.jpg (470 × 430 (17 KB)) - 17:31, 17 April 2014File:5287 15 3d printer buyers guide part 1 what makes up a 3d printer.jpg (620 × 410 (15 KB)) - 17:24, 22 April 2014File:Extrusor-Paso 1 A.png (3,048 × 2,424 (2.59 MB)) - 11:27, 27 May 2014File:Extrusor-Paso 1 B.png (2,266 × 2,113 (2.38 MB)) - 11:32, 27 May 2014File:Cable USB tipo B 1,8 metros.png (3,278 × 2,536 (1.43 MB)) - 04:01, 25 April 2014File:Calibracion Drivers-Paso 1 A.png (3,780 × 2,539 (3.44 MB)) - 08:59, 28 April 2014File:Calibracion Drivers-Paso 1 B.png (2,303 × 2,303 (4.8 MB)) - 09:04, 28 April 2014File:Eje Y-Paso 1 A.png (4,392 × 1,788 (3.54 MB)) - 10:05, 26 May 2014File:Eje Y-Paso 1 B.png (4,452 × 1,164 (2.8 MB)) - 10:12, 26 May 2014File:Eje X-Paso 1 A.png (3,696 × 2,520 (2.16 MB)) - 10:14, 28 April 2014File:Eje X-Paso 1 B.png (3,030 × 1,328 (2.5 MB)) - 10:14, 28 April 2014File:Eje X-Paso 1 C.png (4,008 × 2,232 (4.09 MB)) - 10:25, 28 April 2014File:Eje Z-Paso 1 A.png (4,236 × 2,532 (1.78 MB)) - 07:40, 26 May 2014File:Eje Z-Paso 1 B.png (4,254 × 2,158 (2.17 MB)) - 07:41, 26 May 2014File:PowerExpander-1-back.jpg (620 × 492 (122 KB)) - 09:27, 20 August 2014File:PowerExpander-1-front.jpg (612 × 509 (127 KB)) - 09:27, 20 August 2014File:PowerSupplyPrimary CPH01 1 V1.zip (66 KB) - 15:31, 1 September 2014- {| class="wikitable sortable" border="1" | 1 || x-carriage || RP ||stl[[https://github.com/prusajr/PrusaMendel/blob/mast14 KB (2,132 words) - 14:59, 2 March 2015
File:1 20702.jpg (190 × 161 (15 KB)) - 11:02, 22 January 2015File:Z-drive 1 exploded.png (640 × 480 (30 KB)) - 12:18, 10 November 2014File:1-4in Wood.pdf 1/4in wood parts of the Boxd 3D(25 KB) - 06:35, 15 January 2015File:1-8in Metals.pdf 1/8in aluminum parts for the Boxd 3D(7 KB) - 06:35, 15 January 2015File:4connection (1).png (557 × 444 (158 KB)) - 04:05, 9 January 2015- 66 bytes (8 words) - 05:18, 25 July 2015
- #REDIRECT [[Talk:Temperature Sensor v1.1]]42 bytes (5 words) - 05:22, 25 July 2015
- 44 bytes (5 words) - 04:48, 25 July 2015
- 37 bytes (5 words) - 04:51, 25 July 2015
- 45 bytes (5 words) - 04:56, 25 July 2015
- 49 bytes (6 words) - 04:56, 25 July 2015
File:1-5-hexagonal-wrench.jpg (800 × 600 (72 KB)) - 10:11, 29 May 2015File:1-ferule-green-wire-60mm-1.JPG (1,600 × 1,200 (448 KB)) - 10:22, 6 February 2015File:1-ferule-green-wire-60mm-2.JPG (1,600 × 1,200 (438 KB)) - 10:23, 6 February 2015File:1-ferule-red-wire-60mm.JPG (1,600 × 1,200 (472 KB)) - 10:24, 6 February 2015File:1-ferule-black-wire-60mm.JPG (1,600 × 1,200 (488 KB)) - 10:24, 6 February 2015File:Extruder-1-2.JPG (1,600 × 1,200 (134 KB)) - 14:07, 6 February 2015File:Minitronics v1-1 wiring.jpg (4,979 × 3,086 (1.97 MB)) - 05:37, 5 June 2015File:1 Con Arduino.JPG (2,048 × 1,536 (675 KB)) - 14:41, 25 February 2015File:Wolfy Lasercut Drawing 1-1.zip (22 KB) - 09:12, 26 March 2015File:Arduino-1-0-4.jpg (500 × 600 (55 KB)) - 13:00, 17 April 2015File:Arduino-1-0-4 download.jpg (3,333 × 2,048 (1.54 MB)) - 13:01, 17 April 2015File:Arduino-1-0-4 minitronics.jpg (703 × 642 (93 KB)) - 13:01, 17 April 2015File:Arduino-1-0-4 Marlin M222 Minitronics.jpg (892 × 696 (171 KB)) - 13:01, 17 April 2015File:Arduino-1-0-4 portCOM.jpg (559 × 633 (84 KB)) - 13:04, 17 April 2015File:FullSizeRender (1).jpg (1,280 × 962 (263 KB)) - 22:44, 30 April 2015File:142-Minitronics v1-1 wiring-1.jpg (1,196 × 792 (147 KB)) - 13:21, 17 July 2015File:142-Minitronics v1-1 wiring-2.jpg (800 × 600 (181 KB)) - 05:42, 28 May 2015File:142-Minitronics v1-1 wiring-3.jpg (800 × 600 (132 KB)) - 05:42, 28 May 2015File:142-Minitronics v1-1 wiring-4.jpg (800 × 600 (185 KB)) - 05:42, 28 May 2015File:142-Minitronics v1-1 wiring-5.jpg (800 × 600 (153 KB)) - 05:43, 28 May 2015File:142-Minitronics v1-1 wiring-6.jpg (800 × 600 (130 KB)) - 05:45, 28 May 2015- 62 bytes (7 words) - 04:47, 25 July 2015
File:Nelu delta robot v2 1 sus.png (448 × 336 (389 KB)) - 01:52, 15 June 2015File:1- Mano Rev03.jpg (1,920 × 1,440 (99 KB)) - 11:08, 6 July 2015File:M-Minitronics v1-1 wiring.jpg (1,196 × 792 (156 KB)) - 06:38, 16 July 2015- [[Category:Generation 1 electronics]]5 members (0 subcategories, 0 files) - 15:18, 28 August 2015
File:17 Rosca Macho (1).jpg (1,617 × 901 (81 KB)) - 08:08, 6 April 2016File:Dollofeatured (1).jpg (1,069 × 534 (91 KB)) - 01:25, 18 June 2016File:SMART RAMPS 1-4-1 LCD.jpg (1,024 × 712 (210 KB)) - 22:11, 26 June 2016File:SMART RAMPS 1-4-1 fin.jpg (2,067 × 1,371 (587 KB)) - 20:54, 26 June 2016File:SMART RAMPS 1-4-1 CONN.JPG (800 × 596 (245 KB)) - 20:58, 22 June 2016File:SMART RAMPS 1-4-1 SCH.jpg (1,864 × 1,398 (714 KB)) - 21:04, 22 June 2016File:SMART RAMPS 1-4-1 SCH.zip (91 KB) - 21:12, 22 June 2016File:SMART RAMPS 1-4-1 BRD.zip (36 KB) - 21:13, 22 June 2016- 43 bytes (7 words) - 05:16, 1 September 2016
- ==02-B-6-1==57 bytes (9 words) - 05:38, 1 September 2016
- ==EI3 11-B-4-1==47 bytes (9 words) - 06:01, 1 September 2016
- ==EI3 13-B-7-1==76 bytes (13 words) - 06:05, 1 September 2016
- == 11-B-4-1 ==43 bytes (8 words) - 03:02, 29 September 2016
- 86 bytes (12 words) - 03:07, 29 September 2016
File:SMART RAMPS 1-4-1 SCH I2C.jpg (1,864 × 1,398 (567 KB)) - 02:55, 10 November 2016
Page text matches
- ...to declare chemical listed products if they import them at a quantity over 1 ton/year. If additives are in low quantity, the declaration threshold may n10 KB (1,581 words) - 20:58, 5 January 2018
- October 1, 2006458 bytes (72 words) - 06:21, 31 July 2014
- 1. Some People have asked to donate money to MetalicaRap specifically, should ...age, and Solar Plant Dev. they are all closed email lists and have between 1 and 5 on each team, having gone on different Open design Opensource days t1 KB (199 words) - 16:09, 24 November 2011
- {{Languages|RAMPS 1.3}} |name = RAMPS 1.319 KB (3,027 words) - 06:48, 11 December 2011
- ...T<sub>0</sub> would be V<sub>1</sub>, V<sub>2</sub>, V<sub>3</sub>; T<sub>1</sub>, T<sub>2</sub>, T<sub>3</sub>. -1.000 -1.000 0.000 (1st vertex)9 KB (1,363 words) - 14:04, 8 October 2015
- {| border="1" cellspacing="0" cellpadding="5" align="center"3 KB (484 words) - 08:00, 2 January 2015
- {| border="1" cellspacing="0" cellpadding="5" align="center" | Blender || .blend || [[:Image:Tux.blend]] || 1.1Mbytes || Native blender 2.41 ||2 KB (276 words) - 08:06, 2 January 2015
- {| border="1" cellspacing="0" cellpadding="5" align="center"596 bytes (80 words) - 08:02, 2 January 2015
- .../blog.reprap.org/search?q=herringbone]; [http://forums.reprap.org/read.php?1,33645]; [http://blog.reprap.org/search?q=rack]; [[RBS/Rack]] {| border="1" cellspacing="0" cellpadding="5" align="center"1 KB (159 words) - 08:01, 2 January 2015
- {| border="1" cellspacing="0" cellpadding="5" align="center"637 bytes (91 words) - 05:44, 19 August 2013
- {| border="1" cellspacing="0" cellpadding="5" align="center"477 bytes (63 words) - 08:07, 2 January 2015
- ...e handle to screw onto the shaft (which is easy - just make the hole about 1 mm undersized and then the metal shaft will cut its own thread when you scr833 bytes (147 words) - 08:00, 2 January 2015
- {| border="1" cellspacing="0" cellpadding="2" class="wikitable sortable" || GPL || v1.4 || 1-2 || 3 (maximum, shared w/ Heaters) || 3 (maximum, shared with Fa16 KB (1,730 words) - 16:14, 26 April 2020
- {| border="1" [[image:ThermoplastExtruder_2_0-retaining-screw-1.jpg|thumb]]38 KB (6,703 words) - 17:54, 13 October 2013
- ! Vendor !! Shipping location !! Material(s) !! 1.75 mm !! 3 mm !! Reviews & Additional notes. |[http://www.3druckstore.com/Filament:::1.html 3Druckstore] || DE40 KB (4,984 words) - 06:50, 27 June 2016
- * C2-C5: 1μF eletrolytic capacitors (with a voltage rating of 30V or higher). * A piece of stripboard with 2.54mm (0.1") spaced continuous track. It should be a minimum of 21 holes along the tr12 KB (1,987 words) - 05:01, 25 July 2015
- 1 Watt pigtail diode laser with optical head, different diodes with up to 25 ...ctors. The so called M140 variety can go easily up to 2Watt when driven at 1.4Ampers. With this quite more hefty diode you can expect to cut any color o16 KB (2,450 words) - 18:14, 16 July 2020
- *"Generic Touch Probe": we can mount a touch probe toolhead on a 2+1 axis machine like a CNC router, mill, or RepRap. This is convenient if we868 bytes (124 words) - 08:14, 2 January 2015
- STEP 1: PREPARATION FOR THREAD RESTORATION ...bending the rod to break it is easier than cutting (use the nuts from STEP 1 to hold the rod close to the cut so you don't damage threads or bend the ro9 KB (1,585 words) - 02:42, 7 November 2010
- |categories = Thermoplastic Extruder 1.0 1. Keeping the flow rate of the extruder well controlled (proportional to XY3 KB (461 words) - 08:25, 16 May 2015
- *Copy sub directories in reprap-arduino-firmware-1.3/library directory to Arduino hardware/libraries directory. *With reprap-arduino-firmware-1.3 you should end up with 14 sub directories below /libraries.15 KB (2,247 words) - 18:45, 13 July 2015
- usb 1-1: new full speed USB device using uhci_and address 2 usb 1-1: configuration #1 chosen from 1 choice5 KB (834 words) - 11:33, 2 July 2019
- ...10/gm3-motor-suppressor.html here]. An RRRF version [[GM3 Noise Suppressor 1 0]] is under development details [http://blog.reprap.org/2008/09/new-board- ...gs are required at the bottom for hard plastics like PLA and ABS. Mine are 1.5mm x 9mm x 25mm and came from an A3 flat bed scanner's lid hinge. Note spr14 KB (2,350 words) - 17:08, 28 November 2014
- Warm up to raft temperature and wait 1 minute for PTFE nozzle to expand and filament to melt above the PTFE / bras3 KB (580 words) - 06:37, 11 January 2015
- [[Image:drexler-arm-1.png|right|400px]] ...aterials shaft down the middle. The full design has 5 rotating joints and 1 extending segment.1 KB (163 words) - 07:12, 8 September 2013
- ...mmer months of 2007. He is a McWire Cartesian bot that uses the RepRap Gen 1 electronics and an Mk II extruder. Standard 200 step stepper motors from th Frank's frame is a McWire design built from 1" steel water pipe and fittings. The frame is bolted to a piece of MDF for s16 KB (2,747 words) - 19:57, 27 April 2011
- '''Step 1:''' If you have Windows, go to [[http://goodbye-microsoft.com/ Here]], get10 KB (1,695 words) - 12:12, 7 March 2013
- [[Image:Legorap1c01.jpg|500px|Step 1]]3 KB (405 words) - 17:47, 9 November 2015
- == Adding Current Limiters to the PIC/Generation 1 Electronics == The PIC/Generation 1 electronics do not have any form of current limitting. They rely on the ste2 KB (271 words) - 20:27, 26 November 2011
- This page describes the "FTIStrap", a RepStrap [1,2] which is almost completely built from fischertechnik [3] parts. Construc * position accuracy: approx. 0.1 mm in all directions (i.e., approx 256 lpi)66 KB (10,989 words) - 03:03, 28 April 2012
- === Step 1 === [[Image:ReplathPenSetup1.png|Pen Setup Step 1]]4 KB (593 words) - 04:06, 29 December 2014
- =Printer #1= ** Stepper motors are 1.8° per step or 200 steps per revolution4 KB (462 words) - 14:27, 18 March 2014
- == Fehler in der GCode-Firmware 1.4 bei Verwendung von Gleichstrommotoren == #define EXTRUDER_0_STEP_ENABLE_PIN (byte)-13 KB (540 words) - 13:22, 25 November 2011
- '''Passo 1:''' se avete Windows, andate [[http://goodbye-microsoft.com/ Qui]], scarica [http://store.RRRF.org/product_info.php?cPath=1&products_id=78 Complete Arduino Electronics Kit] ordinato insieme al microc12 KB (1,752 words) - 18:23, 28 November 2014
- There is a dedicated [[http://forums.reprap.org/read.php?1,17299 forum thread here]] for discussion of this Builder's wiki, what shoul4 KB (636 words) - 08:32, 8 July 2014
- [[Image:ActionCar ABS print.jpg|thumb|right|300px|ABS print of a 1/2 scaled down Action Car Chassis]]670 bytes (115 words) - 10:24, 26 June 2011
- {| border="1" cellspacing="0" cellpadding="5" align="center"543 bytes (85 words) - 10:38, 26 June 2011
- 1 40mm long piece of M6 brass bolt with a 3mm hole drilled right down the mid 1 M5 nyloc nut 90576A114 [http://www.mcmaster.com/nav/enter.asp?partnum=905766 KB (862 words) - 17:55, 13 October 2013
- {|border="1" |14 KB (577 words) - 19:58, 18 July 2011
- * 1 Gb USB flash drive or larger * Atleast 1 gb ram (for the host software)4 KB (675 words) - 17:19, 4 March 2012
- {| border="1" cellspacing="0" cellpadding="5" align="center" ! Difficulty (1 = easy, 10 = impossible)1 KB (155 words) - 08:03, 2 January 2015
- == Bug in GCode firmware 1.4 using DC motors == #define EXTRUDER_0_STEP_ENABLE_PIN (byte)-13 KB (516 words) - 13:21, 25 November 2011
- STEP 1: Do a pre-flight check. Look round all the RepRap joints and mechanisms, lo * Test 1 - direction. Carefully press X-axis HOME button keeping your hand on the Em4 KB (703 words) - 18:04, 28 November 2014
- Normally, the arduino is reset by dropping the DTR line for 1 second. Since the Arduino takes several seconds to reboot, you will want to3 KB (501 words) - 10:12, 7 May 2015
- The size parameters defaults to 1 Defaults to cylinder(1, 1, 1, 1)5 KB (816 words) - 06:34, 11 January 2015
- ****RepRapFactor: *****- (1.53) --[[User:Danielpublic|Danielpublic]] 14:45, 1 October 2011 (UTC)9 KB (1,412 words) - 03:30, 20 January 2016
- ...ore. The Sanguino is now compilable and uploadable easily with Arduino IDE 1.0.4 or above using Optiboot loader. Atmega644p and Atmega1284p are now buil ...p board's ISP header. Orientation is critical (red wire corresponds to pin 1)!3 KB (446 words) - 08:20, 4 October 2013
- * 1. It attenuates its power in proportion to the proximity of its other interl ...ly interrogates any new node to ensure that it conforms to characteristics 1 and 2. If the new node does not, its signals are not relayed.4 KB (615 words) - 13:45, 12 May 2015
- === 1. Getting started === ...have the cursor click to one tenth of that, so everything I design is on a 1 mm grid. This gives precision, but the screen isn't filled with lots of gr18 KB (3,206 words) - 06:33, 11 January 2015
- {| border="1" | 1 || 1.284 KB (695 words) - 05:12, 19 July 2015
- .../labs.autodesk.com/utilities/fusion/ Autodesk Labs] and is good until June 1, 2011. A Mac native preview has been unveiled and is planned to be availabl ====Stripboard Designer 1.0====27 KB (4,082 words) - 12:06, 26 October 2021
- ...e motors just start running. Then give the trim port a final turn of about 1 eighth of a turn and your should be good to go. When using Marlin firmware change X_ENABLE_ON from 0 to 1.41 KB (6,863 words) - 16:15, 31 March 2020
- <math> 1 + 1 = 2 </math> ...\frac{\ln\left ( \frac{R}{R_{0}} \right )}{(\frac{1}{T + 273.15}) - (\frac{1}{T_{0} + 273.15})}2 KB (326 words) - 12:33, 13 July 2014
- | z-leadscrew-base||1||2||Assembly Total # of assemblies: 117 KB (2,708 words) - 06:17, 9 April 2014
- This variable stores how many steps to take to move the X axis 1 inch. You will need to set this as accurately as possible if you want your ..."-20 threaded rod means that there are 20 threads per inch (aka 20 turns = 1 inch.) Simply take that number and multiply it by the steps in a revolutio7 KB (930 words) - 20:54, 7 July 2011
- {| border="1" ...pper exerciser window is useful for this.) Get the platform to stop about 1 mm below the nozzle.11 KB (1,620 words) - 09:09, 28 January 2013
- ===Blog#1:=== 1. useful : Hanger http://www.thingiverse.com/thing:4443314 KB (2,575 words) - 01:24, 1 May 2013
- == Blog #1 == 1. useful :http://www.thingiverse.com/thing:4294819 KB (3,321 words) - 15:58, 21 April 2013
- ## <s>Ramps 1.4</s> *Ramps 1.4 + 5 pololus (+disipadores) + Mega 2560 + Hotbed MK2b + Correas GT2 + Pole4 KB (626 words) - 06:18, 22 May 2013
- * The toothed pulleys supplied by McMaster fit a 1/4" shaft. For the Y and Z axes, these need to be bored out to 8mm. The X pu * On the generation 1 extruder board, the value of C3 should be 100nF for normal operation. Also1 KB (219 words) - 14:01, 25 November 2011
- {| border="1" * 1. The number of them in existence and the wealth they produce can grow expon12 KB (1,911 words) - 17:56, 13 October 2013
- Start by wiring up the 12-volt power cables. You'll need 1.1 m of twin wires. ...tely above is looking into the socket (female) and at the pins (male). Pin 1 is the ground (negative) connection and pin 2 is +12v connection. Pin 3 is7 KB (1,178 words) - 22:37, 4 February 2024
- ...ely above is looking into the socket (female) and at the pins (male). Pin 1 is the ground (negative) connection and pin 2 is +12v connection. Pin 3 is ...R Future Technology Devices International Ltd.], [http://parts.digikey.com/1/parts/1501998-module-usb-ser-uart-ft232-24-dip-um232r.html Digi-Key], or fr5 KB (921 words) - 21:28, 24 November 2023
- 1) 370 + 234 + 370, remainder=26 ...£10||Camiel's [http://www.mendel-parts.com/index.php/catalog/electronics-1/sets.html Gen6 electronics] + Shipping9 KB (1,448 words) - 13:14, 7 June 2018
- Assembly qty: 1 | Thermal-barrier and nozzle||1||1||Assembly11 KB (1,944 words) - 06:23, 18 March 2014
- Total # of assemblies: 1 ...obot-m4/printed-parts/x-carriage-lower_1off.stl x-carriage-lower_1off]||1||1||RP15 KB (2,201 words) - 00:49, 5 February 2024
- ...arts/z-leadscrew-base-bar-clamp_2off.stl z-leadscrew-base-bar-clamp_2off]||1||2||RP ...n-robot-m4/printed-parts/z-leadscrew-base_2off.stl z-leadscrew-base_2off]||1||2||RP8 KB (1,124 words) - 06:24, 18 March 2014
- Total # of assemblies: 1 ...//www.thingiverse.com/thing:1625 #2] [http://blog.arcol.hu/?p=312 #3])||1||1||RP8 KB (1,156 words) - 00:56, 5 February 2024
- Total # of assemblies: 1 | motherboard-plate.par||1||1||Sheet [[Media:Mendel motherboard-plate.par.png|image]] [[Media:Motherboard2 KB (310 words) - 15:14, 25 November 2011
- | belt-width-adjuster_1off||1||1||RP | Box cutter/Stanley blade||1||1||Blade2 KB (353 words) - 05:07, 17 December 2011
- If you have a 5mm splined shaft, with no gearbox, on a motor with a 1.8 degree step, and 3mm feedstock, a good starting point is: If you have a 3/16" splined shaft, with no gearbox, on a motor with a 1.8 degree step, and 3mm feedstock, a good starting point is10 KB (1,533 words) - 18:44, 13 July 2015
- This is a duplicate of [[Firmware_installation]]. 1 of them should be redirected and a link posted here to [http://www.reprap.o http://forums.reprap.org/read.php?1,70842,70842,quote=12 KB (341 words) - 13:12, 20 June 2011
- ...king a 3D file of an object just using a camera or a camcorder with either 1) a projected grid from a video projector or 2) a projected line(s) from low *"Generic Touch Probe": we can mount a touch probe toolhead on a 2+1 axis machine like a CNC router, mill, or RepRap. This is convenient if we8 KB (1,235 words) - 04:31, 21 October 2016
- Quì si trovano i file in 3d per [http://objects.reprap.org/mediawiki/images/1/1a/MendelSolidworks.zip - Solidworks 2010 - 18mb] delle parti meccaniche ed ...3 mm.|| [[PLA]], [[HDPE/it|HDPE]], [[ABS]] e altri. Utilizza filamenti ø 1/8”.5 KB (698 words) - 01:06, 5 February 2024
- ...]] & more. Uses ø 3 mm filament.|| [[PLA]], HDPE, [[ABS]] & more. Uses ø 1/8” filament.4 KB (654 words) - 23:01, 1 February 2024
- 1. Install Molex conectors on your stepper motors (all except the extruder mo | Stepper Motor Driver v2.3||1||3||10 KB (1,752 words) - 08:13, 27 November 2011
- ...sor as CPU, they all can drive bipolar stepper motors all provide at least 1/8 microstepping and they all run the same firmwares ( = controller software {| border="1" cellspacing="0" cellpadding="2"3 KB (446 words) - 04:27, 26 November 2015
- 1. El número de ellos en existencia y producir una riqueza que puede crecer Texto de Adrian Bowyer, 2 de febrero 2004, actualizado: 21 de junio 2005, 1 de diciembre2005, 24 de febrero 2006, 18 de mayo 200712 KB (2,138 words) - 06:15, 26 November 2011
- The first version will have a footprint of ~1 ft x 2 ft (30 cm x 60 cm), and a workspace of 1) Thermoplastic: like a normal RepRap8 KB (1,243 words) - 11:25, 28 October 2013
- Mendel Documentation Header|{{{1|}}}}}847 bytes (79 words) - 02:55, 24 April 2011
- Hi -- Two quick things 1) the reCaptcha for this site is being shut down 3.31.2018 (with a quick loo7 KB (1,239 words) - 07:52, 8 July 2022
- .... Usa filamentos de ø 3 mm.|| PLA, HDPE, ABS y más. Usa filamentos de ø 1/8” filament. ...n||Resolución del cabezal 0.5 mm, 2 mm tamaño característico mínimo, 0.1 mm posicionamiento de precisión, capa thk 0.3 mm||Resolución del cabezal4 KB (651 words) - 18:52, 28 November 2014
- You can make RBS beam from cutting 1/2" sheet with a laser cutter. ...beams from thin plywood sheet. Just cut long thin, dovetail-edged strips, 1" or 2" wide and glue them together.4 KB (618 words) - 23:30, 19 November 2013
- {| class="wikitable" border="1" | 115 KB (2,229 words) - 15:15, 25 November 2011
- You really want a 1-2-3 block and an edge-finder, but that adds $50+ to the price of your machi1 KB (184 words) - 17:11, 28 November 2014
- Motherboard (1) Extruder Controller (1)7 KB (1,103 words) - 14:26, 5 November 2010
- ! Material(s) !! 1.75 mm !! 3 mm !! Reviews & Additional notes ...e the filament you are looking for, you can make a backorder and get it in 1 week ||11 KB (1,492 words) - 16:31, 18 September 2017
- ...C Router able to handle raw materials that come in a "full-sized sheet" of 1.2 m × 2.4 m ( 4 feet × 8 feet, aka "four by eight") slab. It may be a [[ Zenbot has several CNC routers for under $ 1 500 (not including the spindle).7 KB (1,100 words) - 17:04, 13 April 2020
- ...really hot (and thus safely dry) I poured in the pewter and left it for a 1/2 hr or so to cool off gently. I definitely did not impatiently have-to wit4 KB (663 words) - 22:24, 14 January 2016
- Also, we need to distinguish between 2D, 2D+1, and 3D form factors for the end object. ...n ... [http://forums.reprap.org/search.php?0,search=laminated,author=,page=1,match_type=ALL,match_dates=0,match_forum=ALL,match_threads=0 other discussi3 KB (355 words) - 19:33, 9 November 2021
- ...first imperfect replicator. ''3D Printing and Additive Manufacturing,'' 1(1), pp.4-5. https://www.liebertpub.com/doi/abs/10.1089/3dp.2013.0003 ...turn on Investment for Open-Source 3-D Printers]. ''Technologies'' 2017, 5(1), 7; doi:10.3390/technologies5010007 [https://www.academia.edu/31327768/Eme11 KB (1,573 words) - 09:29, 6 May 2024
- [[User:Fenn|Fenn]] 08:25, 1 April 2010 (UTC) ...and so it gets my vote. why has this stalled? --[[User:Fenn|Fenn]] 08:33, 1 April 2010 (UTC)4 KB (737 words) - 05:02, 6 September 2010
- [[#Getting involved|1 Getting involved]]<br /> ...n how to get a new RepRap wiki account: [http://forums.reprap.org/read.php?1,641102 How to get a new RepRap wiki account]7 KB (1,046 words) - 08:51, 19 October 2021
- {{Box/Top|{{{1}}}|{{{2}}}|{{{3}}}|{{{4}}}}} {{Box/Bottom|{{{1}}}|{{{4}}}}}652 bytes (83 words) - 15:45, 14 March 2021
- |url = [http://dev.forums.reprap.org/read.php?1,9376 Forum Thread] Image:Mixing 1.jpg|Mixing 15 KB (785 words) - 11:37, 1 December 2014
- ==Version 1 Errata==7 KB (1,239 words) - 12:27, 21 September 2015
- ...-bearing plates & mirror are very difficult to make from wood. Get some 1/16th inch (scant 2mm) aluminum sheet and a hacksaw. Cut 4 25mm x 36mm rect4 KB (712 words) - 04:04, 25 April 2011
- 20" high, cut from 1/8" baltic birch, selling on etsy for $88. This6 KB (902 words) - 16:50, 13 April 2020
- [[File:FilamentDetectImage1.png|thumb|Image 1 - Illustration of one possible approach]] * Part 1: [http://www.thingiverse.com/thing:1790228]6 KB (1,032 words) - 12:40, 11 December 2017
- === FoundationLayers=-1 === ...n under the object being built before building proper starts. Set this to -1 to suppress the laying down of foundations.22 KB (3,532 words) - 17:59, 28 November 2014
- It has been proposed that this page should be moved to '''{{{1}}}'''. Please voice your opinion in the discussion page.734 bytes (114 words) - 16:49, 4 November 2010
- 1. Use 13mm for all moving parts to reduce weight.6 KB (888 words) - 23:49, 19 November 2013
- ...f their [[faceplate]] in tenth of inches. So a "NEMA 17" has a 1.7 inch by 1.7 inch faceplate. By standardizing the stepper motors (the faceplates, [[fl * <tt>NEMA 34D016</tt> 3.4" diameter stepper motor, that is 1.6" long, with a flange.5 KB (718 words) - 05:20, 7 September 2015
- Step 1 – Preparation ...ied to model the cable in SolidWorks. Two versions were made, a simplified(1) and a more ergonomic(2). The reason of the two models is see which one wil12 KB (1,887 words) - 23:49, 12 December 2014
- ...l-stress-distributions-multilayer-laser-solid-freeform-fabrication-process-1/ interesting, computational simulation of thermal distortion and stress dur ...d stress, to form a cylindrical shell of radius r where: r=(α*dT/dz) -1 ( 1)84 KB (13,534 words) - 22:26, 14 January 2016
- ...box frame, made of wood, is actually a much stronger frame, regardless of 1/Appearance, a 'value added' feature sought by those who buy 'Acrylic 3D Pri3 KB (483 words) - 04:58, 14 February 2021
- ==Prototype 1== [[Image:Delta Prototype 1 upside down.jpg|300px| Delta prototype 1 upside down]]9 KB (1,398 words) - 13:09, 21 October 2016
- ...is a prototype printer built primarily from 80/20 [[T-Slot]] extrusion and 1/8" aluminum plate.361 bytes (40 words) - 20:49, 12 January 2020
- ...rger_RepRap|scaled up]] 3dprinter which would produce large objects with a 1 m3 max. dimension. big enough for printing a chair, a table, prosthetics, h953 bytes (132 words) - 01:53, 5 February 2024
- 1. Controllably feeding the wire from the spool;9 KB (1,361 words) - 20:28, 23 January 2013
- 1) You need to get yourself a Bluetooth dongle, if your PC doesn't have inte Type '''SU,96,8,0,0,1'''6 KB (965 words) - 05:22, 30 December 2014
- ...led plans for building a support extruder tool head, see [[SupportExtruder 1 0]].''3 KB (497 words) - 09:14, 17 April 2014
- ...te PVA based glue like Elmer's Glue-All or School Glue. The ratio is about 1 part glue to 10 parts water. Apply it to a hot bed and allow the solution t Folks at the 3d printing brazil group have discovered that a solution of 1:10 jello to water adhere both PLA and ABS if the heated bed is over 60°C,31 KB (5,100 words) - 21:49, 11 November 2018
- ...paste, the plate was sandwiched between 2 kapton sheets, and covered with 1.5mm aluminium sheet. ...we were able to operate the boards, now supplemented with a Stepper Driver 1.2 for the Z axis. After finally getting everything running, the CupCakeStra24 KB (3,862 words) - 23:34, 19 November 2013
- [http://grabcad.com/library/wade-s-geared-extruder-onshape-cad-1 GrabCAD] ...Onshape] or [http://grabcad.com/library/wade-s-geared-extruder-onshape-cad-1 GrabCAD]10 KB (1,618 words) - 09:33, 5 November 2016
- ...ersion 1.25 or [[Generation 7 Electronics]]. Version 1.25 and earlier are "1.5 layer" designed boards (i.e. it's double sided board, but one of layers c ...nds with the version you are building [[RAMPS1.4]],[[RAMPS1.3]] or [[RAMPS 1.2]]21 KB (3,268 words) - 16:19, 20 November 2018
- <br />--[[User:Nudel|Nudel]] 01:03, 1 October 2011 (UTC)</blockquote> <br />--[[User:jCollasius|jCollasius]] 22:40, 1 Mai 2015 (UTC)</blockquote>6 KB (829 words) - 19:20, 18 July 2016
- E.g: [[Gen7_Endstop_1.3.1|Gen7 Endstop]] and [[BIQ Opto Endstop|Opto Endstop]]. [[File:Gen7 Endstop 1.2 Assembled.jpeg|Gen7 Endstop v.1.3.1|300px|center]]5 KB (776 words) - 06:03, 16 May 2015
- 1) I seem to have elected myself "Seniormost Library Gnome" and3 KB (465 words) - 12:46, 14 July 2014
- ...10,000 damn websites.''' 2-3 websites is better than 10,000 websites, and 1 website twice or thrice as good, because it means 10,000 less outgoing link3 KB (471 words) - 09:10, 13 January 2015
- * [http://www.theodoregray.com/PeriodicTable/PopularScience/2003/09/1/index.html microwave] ...nominally CaSO4·1/2H2O. It is created by heating gypsum to about 150 °C.[1]12 KB (1,854 words) - 08:17, 19 February 2013
- ...them away, while still paying for the materials for each developer to make 1 mendel a year, and still have a nice ''booze-up'' with the rest of the non-12 KB (1,999 words) - 11:25, 28 November 2012
- ...of people that have 50-1000 posts in our forums than people that have only 1 post, regardless of whether it's negative or positive. We have had some pro | Gear M, M2 || [http://forums.reprap.org/read.php?1,102156/ 1]16 KB (1,864 words) - 14:50, 29 February 2016
- ...ated Bed Team]] - (Team: Casainho) - http://dev.forums.reprap.org/read.php?1,33327 *[[Cyberdyne T-1| Team Cyberdyne]] - (Team: JohnnyCooper) - Blog: http://teamcyberdyne.blogs5 KB (838 words) - 12:51, 2 June 2016
- ...tice|This page has been flagged as containing duplicate material that [[{{{1}}}]] also attempts to cover.<br/>These pages should be merged such that bot489 bytes (69 words) - 22:09, 14 November 2010
- {|border="1" cellpadding="5" cellspacing="0" class="wikitable sortable" {|border="1" cellpadding="5" cellspacing="0" class="wikitable sortable"13 KB (1,741 words) - 17:07, 10 October 2019
- ...s MediaWiki. While we are in the process of moving it please refer to [[{{{1}}}]]}}<noinclude>[[Category:Template:Notice]]</noinclude>273 bytes (40 words) - 13:20, 17 March 2010
- ...printed parts for the mendel. Some people have had some success with using 1/2-16 rod instead. |116 KB (2,625 words) - 05:11, 8 September 2013
- * 1 10 mm M2 screw, or whatever screw will couple with the shaft on the GM3 gea * 1 18 gauge blunt tip dispenser needle3 KB (521 words) - 01:42, 28 March 2017
- ...ght: 120%; font-weight: bold; padding: 0px; margin:0px;padding: 0.4em;">{{{1}}}</{{{header|div}}}><div style="padding:0px 10px 10px;height:{{{height|aut780 bytes (95 words) - 17:41, 28 March 2014
- ...}} Development|{{{name}}} improvements]] {{#if: {{{optional_field|}}} | {{{1}}}[[{{{name}}} {{{optional_field}}}|{{{name}}} {{{optional_field}}}]] | }}< === Example 1 ===826 bytes (90 words) - 05:43, 21 January 2018
- === Example 1 ===679 bytes (77 words) - 05:50, 21 January 2018
- 0, 1, 255, 255, 255, 252, 0, 0, 1, 252, 0, 0, 0, 1, 248, 0,4 KB (273 words) - 00:00, 3 August 2015
- 1) Part 1 Frame Assemblies [http://www.youtube.com/user/RepRapLogPhase#p/u/6/vO1mSThu 2) Frame Integration Part 1 [http://www.youtube.com/user/RepRapLogPhase#p/u/4/ItHOGWUxghc]15 KB (2,299 words) - 05:46, 7 September 2015
- {| border="1"570 bytes (55 words) - 17:16, 10 April 2013
- var out = '<table border="1"><tr><th>Results</th></tr>'; var passtime = cubes * ( 1 - fillfactor ) * depth / getValue('max_beam_speed'); // Time to pass cubes41 KB (5,323 words) - 20:36, 27 December 2014
- --[[User:AndrewBCN|AndrewBCN]] ([[User talk:AndrewBCN|talk]]) 16:20, 1 March 2015 (PST) ...spring that you can fit on the bolts, and has a wire diameter of close to 1 mm, should work well. 3 kg max load, in other words, and an unsprung lengt9 KB (1,575 words) - 20:20, 1 March 2015
- ...supply etc are replaced to produce a printer with a 300x300mm heated bed, 1, 2 or 3 hot-ends, a 24V power supply for the heated bed and electronics and7 KB (1,045 words) - 06:20, 2 March 2017
- ...Gears:Simultaneous Meshing with Rack]]; [http://forums.reprap.org/read.php?1,33645 RepRap forums: "rack and pinion versus belt?"]; [http://blog.reprap.o ([http://forums.reprap.org/search.php?0,search=binding,author=,page=1,match_type=ALL,match_dates=0,match_forum=ALL,match_threads=0 search the Rep30 members (2 subcategories, 0 files) - 16:37, 13 July 2015
- In particular, "3.1.3 Technological innovations" and "Appendix C". * extended auxiliary tools (Erik de Bruijn, "On the viability ..."; "3.1.3 Technological innovations")19 KB (2,841 words) - 18:46, 2 December 2022
- fixtures and rods, and you need to align them with 1-2-3 blocks, lego fixtures, 2 embedded nuts, 1 embedded rail + 1 throughhole, etc. Call10 KB (1,537 words) - 10:56, 18 February 2013
- E.g. a backlash of 0.1 mm in joints can misalign the nozzle up to 1 mm (PositioningError = 2 x Backlash * RodLength / JointDistance) ...eltaJoints-Magnetic_Example_1.jpg|300px|thumb|right|Magnetic Joint Example 1]]9 KB (1,441 words) - 19:35, 3 February 2016
- User 1 uses w0, x0, y0, z0.9 KB (1,325 words) - 16:52, 12 June 2021
- Lynddahl ABS Filament, a minimum of 2000m, price about 1,20kr per meter, roughly 20€/kg (at about 125m per KG) they are willingly3 KB (492 words) - 12:53, 25 November 2015
- {| class="wikitable" border="1" ! Extruder 19 KB (1,409 words) - 15:56, 2 September 2014
- | 1.23+ || The G-code is supported by version 1.23 and above. :RepRapFirmware version 1.19 and later (except within quoted strings)535 KB (81,593 words) - 20:05, 19 May 2024
- crc ^= ((crc & 0xff) << 4) << 1; Recv: ok T:28.1 /1900.0 B:59.8 /60.0 @:127 B@:027 KB (4,624 words) - 20:55, 8 November 2021
- ==Claystruder 0.1 (Stepper Driven Plunger)== ...p://www.fabathome.org/wiki/index.php/Model_1_1-Syringe_Tool Fab@Home Model 1 Syringe Tool] or with a more standard rotational stepper. Examples of the l14 KB (2,240 words) - 01:34, 19 April 2014
- * Motor 1: untested =====Version: 1.1=====4 KB (441 words) - 03:52, 1 January 2012
- ...eprap.org/read.php?4,57039], fullspeceng[http://forums.reprap.org/read.php?1,26026] ) .../jeelabs.net/projects/tosca/wiki/Tosca_SSB_01 Tosca Single Stepper Board 0.1] is specifically designed to produce coordinated motion for desktop CNC mac11 KB (1,564 words) - 14:24, 15 January 2015
- ...}}} the RepRap standard {{{1}}}. There are alternatives to the standard {{{1}}} available and these are listed on the [[Comparison of RepRap Toolchains]218 bytes (29 words) - 17:54, 29 March 2011
- =Photo 1= first tests building a powder-based stereolithography printer: part 114 KB (2,481 words) - 12:08, 28 October 2013
- http://dev.forums.reprap.org/read.php?1,36581 [[Image:sg_bot1.jpg|frame|caption 1]]4 KB (693 words) - 23:55, 19 November 2013
- File:Example.jpg|Item 16 KB (872 words) - 17:20, 19 August 2010
- ...s using a linear actuator to drive a syringe via another syringe at a 1 to 1 ratio. The purpose of this is to separate the heavy power source and the dr ...nhill battle from here. I intend to have a working prototype of both the T-1 and the Hydraulic Control System by May of 2010."3 KB (475 words) - 13:54, 25 November 2011
- ...Competitor discussed in the Team Cyberdyne Forum thread, the [[Cyberdyne T-1]] and [[Cyberdyne Hydraulic Control System]] are necessary transitional mil From [[Cyberdyne T-1]]:2 KB (281 words) - 13:55, 25 November 2011
- ...Competitor discussed in the Team Cyberdyne Forum thread, the [[Cyberdyne T-1]] and [[Cyberdyne Hydraulic Control System]] are necessary transitional mil From [[Cyberdyne T-1]]:2 KB (284 words) - 13:55, 25 November 2011
- ...im Mikrometerbereich völlig unrealistisch, also machen 0,9°-Motoren und 1/32 Microstepping so gut wie keinen Sinn. Für die dabei auftretenden Kräft | 0,9°-Stepper, 14-Zähne-GT2-Pulley, 1/16 Microstepping11 KB (1,496 words) - 14:20, 1 May 2018
- ...owered all-mechanical computer, which could also be considered a 6,000,000:1 scale model of a nano-computer." Suggests that a binary rod computer would5 KB (742 words) - 16:21, 2 December 2022
- **'''Inner Plate (1 x 2)''' **'''Outer Plate (1 x 2)'''8 KB (1,185 words) - 00:33, 5 March 2012
- ...apologies, it may be a little more complicated than that, there is version 1.3 of the [http://www.gnu.org/copyleft/fdl.html FDL]. [[User:Weasel|Weasel]] ...because they are easier to share, and I have not access to compression on 1 of the computers I work on.10 KB (1,645 words) - 10:41, 5 August 2012
- *[[Erik's Ultimaker's v1.1 PCB]] (mostly Jan-Jaap's work, though!) |desc=16 KB (780 words) - 17:37, 6 April 2011
- ...tic discs connected to 4 inch nylon webbing. The conveyor is advanced by a 1 rpm AC gearhead motor. The webbing is stretched using a tensioning device a918 bytes (146 words) - 20:09, 8 February 2011
- Drill out all the small holes with a 1/16" drill bit, then use 1/16" brass rod to make hinge pins. ...0, 1/4 turn, 1/2 turn, and 3/4 turn, perhaps 8 chains at 0, 1/8, 1/4, 3/8, 1/2, 5/8, 3/4, and 7/8 turn? Or perhaps 6 chains vaguely similar to a [[Delta5 KB (734 words) - 10:13, 3 November 2013
- G30 - set reference point 1 G31 - return to reference point 111 KB (1,833 words) - 06:52, 18 July 2015
- c = c - (2c / (4n + 1)) [Equation 13] n += 14 KB (602 words) - 15:31, 5 June 2015
- http://dev.forums.reprap.org/read.php?1,37355 ...m Bohrer gemacht. Da die Bohrer nie sehr genau sind, wird die Bohrung ca 3,1-3,2 mm. Die Bohrung in dem Teflonteil, dem Isolator, habe ich nur mit 2,8 g24 KB (3,931 words) - 23:40, 5 February 2024
- : ''Main page: [[RepRapServo 1 0]]'' Needs position feedback. Options: 1. Linear strip and quadrature sensor (scavenged from inkjet printers). 2.1 KB (151 words) - 00:23, 10 November 2010
- ...Pololu-electronics'''. They are single sided, have no tracks thinner than 1.27mm (0.05"), and have no tracks running between pins, so they are reasonab [http://rapatan-rapatan.blogspot.com/2010/05/rapatan-shield-board-1-electronics-v10.html] Rapatan_Shield_base_board_V1.020 KB (3,299 words) - 23:41, 5 February 2024
- {{Languages|Wolfy1.1}} {{RepRapNavigation|name=Wolfy1.1}}2 KB (202 words) - 09:16, 26 March 2015
- ...translate.google.co.uk/translate?js=n&prev=_t&hl=en&ie=UTF-8&layout=2&eotf=1&sl=de&tl=en&u=http%3A%2F%2Freprap.org%2Fwiki%2FWolfStrap page] http://dev.forums.reprap.org/read.php?1,3735524 KB (4,237 words) - 07:02, 3 September 2019
- |feedurl=http://forums.reprap.org/feed.php?151,69770,replies=1,type=rss ...could be bolted on the edge using 4 mm bolts, this then gives each bearing 1.5 mm exposure on each side of the 10mm sheet pieces. (See pictures of Y and35 KB (5,908 words) - 00:54, 21 April 2013
- {|border="1" ...ers work on a principle of pushing a 3mm rod of plastic through a heated 0.1-0.5mm wide orifice. Although there is work being done on an extruder which22 KB (3,459 words) - 11:28, 22 May 2017
- ...in the report called: "[http://www.google.dk/url?sa=t&source=web&ct=res&cd=1&ved=0CAYQFjAA&url=http%3A%2F%2Fwww.americanchemistry.com%2Fs_plastics%2Fsec ...or PLA is taken from: "[http://www.google.dk/url?sa=t&source=web&ct=res&cd=1&ved=0CAgQFjAA&url=http%3A%2F%2Fwww.natureworksllc.com%2Four-values-and-view8 KB (1,258 words) - 04:30, 29 October 2012
- *http://dev.forums.reprap.org/read.php?1,38704 except the position is higher up 1 screw thread increment (Z). Then we don't need a separate Z motor.8 KB (1,430 words) - 12:26, 21 September 2015
- ...designing my latest creation, the MultiRep Mark 8. What happen to versions 1-7 you ask? Well, most of them were "learning" experiences. I actually got f7 KB (1,126 words) - 01:57, 25 November 2014
- * ~250 g of polymorph, you can get 1 kg of Polymorph somewhere around 20$ * Put some water on the bottom of a pot. I filled somewhere 1,5 - 2 cm.4 KB (757 words) - 10:45, 27 October 2010
- {| border="1" {| border="1"838 bytes (100 words) - 03:39, 19 March 2010
- --[[User:Sebastien Bailard|Sebastien Bailard]] 08:39, 1 September 2010 (UTC)4 KB (578 words) - 15:43, 6 March 2012
- ...(?)(feature) 2 мм, точность позиционирования 0,1 мм, толщина слоя 0,3 мм6 KB (147 words) - 05:16, 2 October 2014
- 4 KB (135 words) - 04:43, 26 November 2011
- Start by wiring up the 12-volt power cables. You'll need 1.1 m of twin wires. ...tely above is looking into the socket (female) and at the pins (male). Pin 1 is the ground (negative) connection and pin 2 is +12v connection. Pin 3 is7 KB (1,085 words) - 23:53, 5 February 2024
- 1 Watt 'pigtail' Diodenlaser mit Fokussier-Optik, verschiedene Laserdioden bi 1. Laser-Quellen:8 KB (979 words) - 17:27, 25 December 2019
- * [http://reprap.org/Downloads/extruder/extruder.html Version 1 of a Polymorph Extrusion Head] designed for rapid prototyping production (A4 KB (634 words) - 15:44, 7 October 2012
- This variable stores how many steps to take to move the X axis 1 inch. You will need to set this as accurately as possible if you want your ..."-20 threaded rod means that there are 20 threads per inch (aka 20 turns = 1 inch.) Simply take that number and multiply it by the steps in a revolutio6 KB (939 words) - 06:33, 11 January 2015
- {| border="1" ...pper exerciser window is useful for this.) Get the platform to stop about 1 mm below the nozzle.9 KB (1,621 words) - 09:45, 14 December 2014
File:AssemblingDarwinElectronics-65.JPG carriage wire bridge 1(483 × 720 (40 KB)) - 06:25, 17 March 2010- ...m the home positions the axes can achieve repeatable movements to within 0.1 mm. You'll need a good bit of bench space, something in the region of 1 m x 2 m should be fine. At least half a meter square of this space should b50 KB (8,709 words) - 12:15, 28 January 2013
- * The toothed pulleys supplied by McMaster fit a 1/4" shaft. For the Y and Z axes, these need to be bored out to 8mm. The X pu * On the generation 1 extruder board, the value of C3 should be 100nF for normal operation. Also1 KB (216 words) - 19:50, 26 November 2011
- {| border="1" * 1. The number of them in existence and the wealth they produce can grow expon11 KB (1,864 words) - 07:42, 7 March 2016
- {{Deprecated|DarwinExtruderController 1 2}} * C1: 1μF electrolytic or tantalum capacitor(*)8 KB (1,325 words) - 20:07, 26 November 2011
- {{Deprecated|DarwinExtruderController 1 2}} * A piece of stripboard with 2.54mm (0.1") spaced continuous track. It should be a minimum of 23 holes along the tr7 KB (1,090 words) - 06:34, 29 November 2014
- == Chyba v GCode firmwaru 1.4 při použití DC motorů == #define EXTRUDER_0_STEP_ENABLE_PIN (byte)-13 KB (564 words) - 16:22, 1 March 2014
- {| border="1"2 KB (257 words) - 20:09, 26 November 2011
- ...stage as (virtually) dunking the part as-designed in acid and melting away 1/2 the width of the extrusion, creating a smaller "core". ...he (virtual) "core", the plastic expands to 1/2 the width of the extrusion(1) in every direction from that point, enough to (hopefully) touch the origin4 KB (588 words) - 05:11, 19 July 2015
- == 1. General Questions ==2 KB (270 words) - 06:22, 27 November 2011
- = Cartesian Robot SNAP Protocol Version 1 =487 bytes (67 words) - 06:34, 11 January 2015
- {| border="1"960 bytes (128 words) - 19:57, 26 November 2011
- === 1. Introduction ===6 KB (1,035 words) - 06:45, 13 May 2016
- {{Deprecated | DC Motor Driver 1 1}} ...et/project/downloading.php?group_id=159590&filename=reprap-dc-motor-driver-1.0-r1.zip download the release file] from SourceForge that has a bunch of he16 KB (2,496 words) - 10:31, 8 June 2013
- You can [http://downloads.sourceforge.net/reprap/reprap-dc-motor-driver-1.1.zip?use_mirror=osdn download the release file] from SourceForge that has a {| border="1"17 KB (2,658 words) - 13:05, 24 June 2014
- {| border="1"2 KB (374 words) - 09:37, 26 November 2011
- {| border="1"1 KB (203 words) - 09:37, 26 November 2011
- {{Deprecated|DarwinExtruderController 1 2}} = Extruder Controller Board - v1.1 =12 KB (1,936 words) - 00:20, 12 September 2013
- {| border="1" | R1 || 10K ohm || 1 || [[Resistor|Resistor]] || [http://www.mouser.com/search/productdetail14 KB (2,352 words) - 17:21, 29 October 2015
- {{Deprecated|Gen7 Endstop 1.3.1}} You can [http://downloads.sourceforge.net/reprap/reprap-opto-endstop-1.0.1b.zip?modtime=1181187177&big_mirror=0 download the electronics files fro7 KB (1,036 words) - 15:24, 23 July 2015
- {| border="1" ...ropped. || [[[[image:DarwinPartDevelopment-Bed-corner-1.1.stl|Bed-corner-1.1.stl]] |thumb]]6 KB (577 words) - 09:39, 26 November 2011
- = Power Distribution and Communications Board - v1.1 = {| border="1"16 KB (2,457 words) - 09:39, 26 November 2011
File:DarwinPowerAndCommunicationsCard-board-step-1.jpg step 1(576 × 432 (213 KB)) - 06:40, 17 March 2010- {| border="1" ...uniqueparts/id/57/bjtemplate/blank" width="100%" height="400" frameborder="1"></iframe>13 KB (2,131 words) - 09:40, 26 November 2011
- ==== v1.2.1 ==== You can [http://downloads.sourceforge.net/reprap/PowerComms-1.2.zip?modtime=1180374732&big_mirror=0 download the electronics files from S15 KB (2,450 words) - 04:46, 25 July 2015
- {{Deprecated|DarwinExtruderController 1 2}} {| border="1"3 KB (430 words) - 20:08, 26 November 2011
- {| border="1" {| border="1"6 KB (890 words) - 04:51, 25 July 2015
- {| border="1" | Reply: || 1 byte: Minor version <br/> 1 byte: Major version2 KB (238 words) - 06:35, 11 January 2015
- * [[McWire Cartesian Bot 1 2]] * [[SupportExtruder_1_0|Support Extruder v0.1]] - our new support material extruder12 KB (1,622 words) - 05:39, 4 September 2015
- |feedurl=http://forums.reprap.org/feed.php?35,83032,replies=1,type=rss ...ap moves axes with a M8 threaded rod, so very slow movement speeds, like 0.1 mm/min are possible.18 KB (2,902 words) - 10:27, 4 November 2013
- ...ber, it backtracks (to the immediately-previous point that generated E<sub>1</sub>) and replaces all the little line segments in between with that one l7 KB (1,250 words) - 05:11, 19 July 2015
- * 1 byte: Response type (0) * 1 byte: minor version number4 KB (545 words) - 06:36, 11 January 2015
- ...the I/O of the [[DarwinExtruderController 1 2]], part of the [[Generation 1 Electronics]] originally designed for the first version of [[RepRapOneDarwi VREF = 1.25 + 5 * VR / 3220 KB (3,214 words) - 02:37, 4 March 2014
- ...i gear-bush-holder.aoi file] that is in two parts called holder-no-support-1 and ...ainst the surface of the PTFE. Using a small electric hand drill, drill a 1.5mm diameter hole through the PTFE along a chord (i.e. not along a diameter19 KB (3,267 words) - 16:49, 28 November 2011
File:ExtruderImprovementsAndAlternatives-v-simple-1-small.jpg simp 1(484 × 464 (189 KB)) - 06:49, 17 March 2010- The outputs are labeled Motor 1 and Motor 2. Each motor has an A and B output. There are also LEDs associ {| border="1"18 KB (2,967 words) - 20:19, 26 November 2011
- = Extruder Controller v2.1 = The reset button on the Extruder Controller v2.1 board is broken. If you have this board, you will need to manually reset i31 KB (5,027 words) - 20:19, 26 November 2011
- {| border="1" | 1A || H-bridge Positive #1 || Motor 135 KB (5,524 words) - 18:33, 18 November 2014
- = Extruder Controller SNAP Protocol Version 1 = * 1 byte status (0=full, 1=empty)2 KB (225 words) - 06:36, 11 January 2015
- * R2 1.5K Resistor ...massive figure for V/m. My rule of thumb is to go for a voltage at least 1.5 times the maximum that they will experience in circuit. "Working voltage26 KB (4,452 words) - 14:31, 29 February 2012
File:FAQ-ATX-to-Lab-PSU-1.jpg ATX-to-Lab-PSU-1(420 × 339 (24 KB)) - 06:53, 17 March 2010- 1)Sand, sand dust721 bytes (106 words) - 20:18, 28 February 2014
- ...irmware build process for Darwin hardware using PIC 16F648 in [[Generation 1 Electronics]]. make[3]: *** [pobj.o ] Error 14 KB (586 words) - 11:46, 4 May 2012
- ...etween teeth is notionally along a point just over half way (typically a 1:1.25 split) up the teeth, and this is called the 'Pitch Line'. The bit above ...st Common Divisor (GCD) of each gear tooth count equals 1. e.g. GCD(16,25)=112 KB (2,042 words) - 21:54, 26 October 2015
- ...achieved so far appears to be about 7.5 degrees. For a threaded rod with a 1 mm pitch that gives us a resolution of 0.021 mm.2 KB (396 words) - 12:49, 30 April 2014
- ...deatils a design to gear the Solarbotics GM3 motor down by approximately 3:1.246 bytes (34 words) - 05:07, 17 December 2011
- = Generation 1 Electronics = [[Category:Generation 1 electronics| ]]4 KB (659 words) - 15:27, 23 July 2015
- [[Category:Generation 1 firmware| ]]868 bytes (109 words) - 15:18, 28 August 2015
- ...google.com/p/sanguino/downloads/detail?name=reprap_motherboard-electronics-1.0.zip&can=2&q= Sanguino RepRap Motherboard] that makes the connections easi === DC Motor Driver v1.1 ===14 KB (2,223 words) - 09:27, 26 November 2011
- ...> there is a line that says <tt>#define EXTRUDER_COUNT 1</tt>. Change the 1 to 2 if you have two extruders. ...f the number of steps of the stepper motors that your RepRap does to cover 1 mm. Change these if need be. If you are not sure exactly what the gearing16 KB (2,592 words) - 06:53, 18 July 2015
- * 1 [[Motherboard_1_2|RepRap Motherboard]] (''mendel/electronics/motherboard'') * 1 [[Mendel USB and power connector]] (no Eagle design - it's a simple piece o10 KB (1,606 words) - 20:53, 19 February 2012
- * Plastic material made into (often 3 mm or 1.75mm) string to be used as raw material in 3D printers. * Extruded plastic (often < 1 mm).17 KB (2,735 words) - 22:34, 1 May 2024
- ...laining the settings. The options are Full-stepping, 1/2, 1/4, 1/8th , and 1/16th microstepping.<br/>4 KB (586 words) - 05:56, 29 November 2014
- ...ls for the Microchip (TM) PIC microcontrollers. The version marked 0.13.4-1 in the Ubuntu and Debian repositories seem to share a common flaw, so we've ...rce package with <tt>wajig source gputils</tt>, fetching the latest 0.13.4-1 files from the gputils repository on SourceForge with968 bytes (146 words) - 18:38, 26 November 2011
- ==== 1. Summary ==== ...me workshops. Fortunately, a servicable alternative can be made from M3 or 1/8 inch washers.3 KB (434 words) - 05:08, 17 December 2011
- ...gnment holes. Remove the clamp and bolt. Mark the sheets from the top down 1,2,3 & 4 with an indellible marker, as in the image on the right (note: some Using an 8mm drill bit drill out the centre holes on sheets 1 & 4. This will allow an M8 bolt or section of rod to go through the mould,4 KB (722 words) - 17:03, 28 November 2011
- After 3 1/2hrs, the stuff still isn't set. This batch is much slower for no obvious r ...r 10c a piece...) to allow it to be threaded onto the heater barrel. After 1/2hr the plaster was shaped with a rasp to remove unwanted protrusions.10 KB (1,794 words) - 19:25, 26 November 2011
- 1) The download for the full 30-page manual which will walk you through the c ==== 1. MANUAL DOWNLOAD ====6 KB (786 words) - 17:11, 28 November 2011
- For example, a speed value of 255 will wait for a period of 256 - 255 = 1 time unit between each step or pulse. ...at a speed of 255 is twice as fast as a speed of 254. A PIC speed of 0 is 1/256th as fast as 255.3 KB (525 words) - 06:36, 11 January 2015
- * 1: Set outputs {| border="1"1 KB (187 words) - 17:17, 28 November 2011
- [[Category:Generation 1 electronics]]3 KB (495 words) - 15:28, 23 July 2015
- ...drill bit. Drill your nozzle's hole into the bottom of this hole, going in 1.5mm-2mm. As the drill bit does not emerge from the other side of the rod ye Screw the rod into that M6 nut about 1/3 the way down it leaving the little hole and untidy sawn-off end pointing6 KB (996 words) - 17:24, 28 November 2011
- Suppose that you want to design a 3:1 ratio gear pair. Using the 3:1 proportion you then need to apply that proportion to deciding the radii of ...Distance''' measure gives the thickness of the gear. The default value is 1 mm. Set it to 10 mm for this example. '''Again don't try to do anything u6 KB (960 words) - 08:01, 2 January 2015
- {| border="1" width="100%" cellpadding="2" cellspacing="2" [[image:ItemsMade-wades-parts-1-small.JPG|thumb]]7 KB (1,195 words) - 08:01, 2 January 2015