Search results

Jump to: navigation, search

Create the page "$1" on this wiki! See also the search results found.

Page title matches

  • Darwin/Arduino Breakout 1 1
    = Arduino Breakout Shield v1.1 = * [http://parts.reprap.org/part/module/Arduino+Breakout+v1.1 Buy the components with ease w/ parts.reprap.org]...
    6 KB (794 words) - 13:59, 25 November 2011
  • Darwin/Arduino Breakout 1 2
    You can [http://downloads.sourceforge.net/reprap/reprap-arduino-breakout-1.2.zip?modtime=1206561051&big_mirror=0 download the electronics files from S
    7 KB (884 words) - 13:59, 25 November 2011
  • Darwin/Arduino Breakout 1 3
    Version 1.3 adds an extra row of power/ground screw terminals. You can [http://downloads.sourceforge.net/reprap/reprap-arduino-breakout-1.2.zip?modtime=1206561051&big_mirror=0 download the electronics files from S
    5 KB (666 words) - 13:59, 25 November 2011
  • Darwin/Arduino Breakout 1 4
    Version 1.4 fixes a potential short problem, and adds additional female headers to al .../superb-east.dl.sourceforge.net/sourceforge/reprap/reprap-arduino-breakout-1.4.zip download the electronics files from Sourceforge].
    7 KB (876 words) - 14:00, 25 November 2011
  • Arduino Breakout 1 1
    #REDIRECT [[Arduino Breakout v1.1]]
    35 bytes (4 words) - 04:59, 25 July 2015
  • Arduino Breakout 1 2
    35 bytes (4 words) - 05:00, 25 July 2015
  • Arduino Breakout 1 3
    35 bytes (4 words) - 05:00, 25 July 2015
  • Arduino Breakout 1 4
    Version 1.4 fixes a potential short problem, and adds additional female headers to al .../superb-east.dl.sourceforge.net/sourceforge/reprap/reprap-arduino-breakout-1.4.zip download the electronics files from Sourceforge].
    7 KB (1,003 words) - 12:13, 7 March 2013
  • DC Motor Driver 1 0
    {{Deprecated | DC Motor Driver 1 1}} ...et/project/downloading.php?group_id=159590&filename=reprap-dc-motor-driver-1.0-r1.zip download the release file] from SourceForge that has a bunch of he
    16 KB (2,496 words) - 10:31, 8 June 2013
  • DC Motor Driver 1 1
    You can [http://downloads.sourceforge.net/reprap/reprap-dc-motor-driver-1.1.zip?use_mirror=osdn download the release file] from SourceForge that has a {| border="1"
    17 KB (2,658 words) - 13:05, 24 June 2014
  • DarwinPowerAndCommunicationsCard 1 2
    62 bytes (7 words) - 04:46, 25 July 2015
  • Extruder Controller 2 1
    = Extruder Controller v2.1 = The reset button on the Extruder Controller v2.1 board is broken. If you have this board, you will need to manually reset i
    31 KB (5,027 words) - 20:19, 26 November 2011
  • GM3 Noise Suppressor 1 0
    39 bytes (5 words) - 04:58, 25 July 2015
  • Arduino Breakout 1 0
    35 bytes (4 words) - 04:59, 25 July 2015
  • Generation 1 Electronics
    = Generation 1 Electronics = [[Category:Generation 1 electronics| ]]
    4 KB (659 words) - 15:27, 23 July 2015
  • Generation 1 firmware
    [[Category:Generation 1 firmware| ]]
    868 bytes (109 words) - 15:18, 28 August 2015
  • Lasercut Pinch Wheel Extruder 1 2
    63 bytes (7 words) - 17:31, 28 November 2011
  • McWireCartesianBot 1 0
    ...f component specifications work: #10-24 x 3/4" screws, 3/4" x 3/4" rails, 1/4" acrylic, etc.
    4 KB (673 words) - 11:46, 28 November 2012
  • McWire Cartesian Bot 1 1
    = McWire Cartesian Bot v1.1 =
    487 bytes (49 words) - 17:48, 28 November 2011
  • McWire Cartesian Bot 1 2 (Death March: Do not build!!!)
    * [http://downloads.sourceforge.net/reprap/reprap-mcwire-cartesian-bot-1.2.1.zip?modtime=1200886076&big_mirror=0 Download the files from SourceForge]. ...the supports pictured are 1/16" thickness. It's highly recommended to use 1/8" thickness from McMaster.com'''
    37 KB (6,065 words) - 05:11, 8 September 2013
  • Motherboard 1 0
    131 bytes (13 words) - 20:17, 26 November 2011
  • Motherboard 1 1
    = Motherboard v1.1 = See [http://objects.reprap.org/wiki/Hacks_to_the_RepRap_Motherboard_v1.1 here in the Builder's Wiki] for hacks to this board.
    26 KB (4,326 words) - 20:17, 26 November 2011
  • Opto Isolator 1 0
    32 bytes (4 words) - 04:57, 25 July 2015
  • PWM Driver 1 0
    ...oject/downloading.php?group_id=159590&filename=reprap-freeduino-pwm-driver-1.0.zip download the release file] from SourceForge that has a bunch of helpf {| border="1"
    14 KB (2,230 words) - 20:21, 26 November 2011
  • PWM Driver 1 1
    = PWM Driver v1.1 = # [http://store.makerbot.com/electronics/electronics-kits/pwm-driver-v1-1-kit.html Buy the full kit (components + PCB) from MakerBot Industries]
    15 KB (2,310 words) - 10:17, 15 July 2012
  • RepRapServo 1 0
    The spatial wavelength is about 1/8", so you could make a handy position sensor or linear stepper out of it.
    17 KB (2,710 words) - 17:33, 16 May 2016
  • RepRap Motherboard 1 1
    29 bytes (2 words) - 02:16, 25 September 2010
  • RepStrap 1 0 Seedling
    31 bytes (2 words) - 22:30, 11 November 2010
  • Motherboard 1 2
    #REDIRECT [[Motherboard 1.2]]
    29 bytes (2 words) - 13:39, 17 March 2010
  • StepperTester 1 0 BOM
    368 bytes (49 words) - 20:05, 26 November 2011
  • UniversalControllerBoard 1 2
    45 bytes (5 words) - 04:54, 25 July 2015
  • SupportExtruder 1 0
    = The Paste Extruder Version 0.1 = ...(furthest from the solenoid) with the broader part of the connector (pins 1 through 8) at the bottom (nearest the solenoid).
    13 KB (2,301 words) - 08:06, 4 May 2013
  • Temperature Sensor 1 0
    37 bytes (4 words) - 05:23, 25 July 2015
  • Temperature Sensor 1 1
    #REDIRECT [[Temperature Sensor v1.1]]
    37 bytes (4 words) - 05:22, 25 July 2015
  • Thermocouple Sensor 1 1
    = Thermocouple Sensor v1.1 = * Make tracks to/from Pin 1/14 to thermocouple fatter
    234 bytes (32 words) - 19:38, 26 November 2011
  • OptoEndstop 2 1
    #REDIRECT [[OptoEndstop 2.1]]
    29 bytes (2 words) - 13:41, 17 March 2010
  • Thermocouple Sensor 1 0
    38 bytes (4 words) - 05:19, 25 July 2015
  • Magnetic Rotary Encoder 1 0
    42 bytes (5 words) - 05:20, 25 July 2015
  • Stepper Motor Driver 2 1
    #REDIRECT [[Stepper Motor Driver 2.1]]
    38 bytes (4 words) - 16:16, 17 March 2010
  • Stepper Motor Driver 1 2
    #REDIRECT [[Stepper Motor Driver 1.2]]
    38 bytes (4 words) - 16:17, 17 March 2010
  • Stepper Motor Driver 1 0
    #REDIRECT [[Stepper Motor Driver 1.0]]
    38 bytes (4 words) - 16:19, 17 March 2010
  • DarwinStepperController 1 2
    48 bytes (6 words) - 04:50, 25 July 2015
  • Compliant Linear Motion Mechanism 1
    |name = Compliant Linear Motion Mechanism 1 y = (1 / E / I) * ( Pmax*x.^3 / 6 - Pmax*L*x.^2 / 4 );
    9 KB (1,420 words) - 05:25, 8 September 2013
  • Stepper Motor Driver 1 1
    #REDIRECT [[Stepper Motor Driver 1.1]]
    38 bytes (4 words) - 22:10, 6 June 2010
  • McWire Cartesian Bot 1 2
    #REDIRECT [[McWire Cartesian Bot 1 2 (Death March: Do not build!!!)]]
    69 bytes (9 words) - 03:57, 20 November 2010
  • 32 Generation X 1 Electronics
    1) More than 3 stepper axes. 7 should be a minimum 9) Memory storage. 1 GB should be a minimum
    11 KB (1,809 words) - 10:04, 26 November 2011
  • Prusa Mendel iteration 1/ru
    ...бласти печати: 200 мм x 200 мм x 100 мм (8.2" x 8.2" x 4.1") {| class="wikitable sortable" border="1"
    15 KB (540 words) - 02:29, 22 December 2012
  • Prusa Mendel (iteration 1)
    * Printing Size: 200mm x 200mm x 100mm (8.2" x 8.2" x 4.1") {| class="wikitable sortable" border="1"
    8 KB (1,140 words) - 11:06, 15 September 2012
  • MakerGear Mosaic 1: MAF-1
    MAF-1 es la primera impresora 3D modelo "Mosaic" del proyecto Clones Wars. (Sigo * '''Nombre''': '''<font color="#0000FF">MAF-1</font>'''
    2 KB (304 words) - 11:33, 12 October 2012
  • Rambo 1 0
    This page is relative to an older revision - 1.0. Image:rambo1-0top.png|Top/1<small><sup>st</sup></small> copper layer
    591 bytes (93 words) - 10:30, 28 November 2014
  • RUG/Pennsylvania/State College/Printers/PSU Unit Solidoodle 1
    ...dle2.jpg|link=RUG/Pennsylvania/State_College/Printers/PSU_Unit_Solidoodle_#1|25px|alt=Silver]] </includeonly> This page contains information about the PSU Unit Solidoodle #1 3D printer.
    856 bytes (108 words) - 11:17, 27 October 2014
  • RUG/Pennsylvania/State College/Printers/PSU Unit prusa i3 1
    This page contains information about the PSU Unit Prusa i3 #1 3D printer.
    884 bytes (124 words) - 11:18, 27 October 2014
  • Prusa Mendel (iteration 1)/pt
    {| class="wikitable sortable" border="1" | 1 || x-carriage || RP ||stl[[https://github.com/prusajr/PrusaMendel/blob/mast
    14 KB (2,132 words) - 14:59, 2 March 2015
  • PowerComms 1 2 BOM
    66 bytes (8 words) - 05:18, 25 July 2015
  • DarwinExtruderController 1 2
    44 bytes (5 words) - 04:48, 25 July 2015
  • StepperTester 1 0
    37 bytes (5 words) - 04:51, 25 July 2015
  • UniversalControllerBoard 1 3
    45 bytes (5 words) - 04:56, 25 July 2015
  • UniversalController 1 2 BOM
    49 bytes (6 words) - 04:56, 25 July 2015
  • PowerCommsBoard 1 3
    62 bytes (7 words) - 04:47, 25 July 2015
  • I3 02-B-6-1
    43 bytes (7 words) - 05:16, 1 September 2016
  • EI3 02-B-6-1
    ==02-B-6-1==
    57 bytes (9 words) - 05:38, 1 September 2016
  • EI3 11-B-4-1
    ==EI3 11-B-4-1==
    47 bytes (9 words) - 06:01, 1 September 2016
  • EI3 13-B-7-1
    ==EI3 13-B-7-1==
    76 bytes (13 words) - 06:05, 1 September 2016
  • I3 11-B-4-1
    == 11-B-4-1 ==
    43 bytes (8 words) - 03:02, 29 September 2016
  • I3 13-B-7-1
    86 bytes (12 words) - 03:07, 29 September 2016
  • Project 1
    |name = Project 1
    877 bytes (135 words) - 06:44, 16 November 2016
  • Phase 1
    |name = Phase 1 }}'''Phase 1''' is an affordable high quality RepRap 3D printer.
    4 KB (576 words) - 09:08, 23 July 2018

Page text matches

  • Health and Safety
    ...to declare chemical listed products if they import them at a quantity over 1 ton/year. If additives are in low quantity, the declaration threshold may n
    10 KB (1,581 words) - 20:58, 5 January 2018
  • RepRap Social Contract
    October 1, 2006
    458 bytes (72 words) - 06:21, 31 July 2014
  • Website Terms And Conditions
    1. Some People have asked to donate money to MetalicaRap specifically, should ...age, and Solar Plant Dev. they are all closed email lists and have between 1 and 5 on each team, having gone on different Open design Opensource days t
    1 KB (199 words) - 16:09, 24 November 2011
  • RAMPS 1.3/nl
    {{Languages|RAMPS 1.3}} |name = RAMPS 1.3
    19 KB (3,027 words) - 06:48, 11 December 2011
  • A community specification for an improvement to STL files.
    ...T<sub>0</sub> would be V<sub>1</sub>, V<sub>2</sub>, V<sub>3</sub>; T<sub>1</sub>, T<sub>2</sub>, T<sub>3</sub>. -1.000 -1.000 0.000 (1st vertex)
    9 KB (1,363 words) - 14:04, 8 October 2015
  • Available Files
    {| border="1" cellspacing="0" cellpadding="5" align="center"
    3 KB (484 words) - 08:00, 2 January 2015
  • Tux
    {| border="1" cellspacing="0" cellpadding="5" align="center" | Blender || .blend || [[:Image:Tux.blend]] || 1.1Mbytes || Native blender 2.41 ||
    2 KB (276 words) - 08:06, 2 January 2015
  • Minimug
    {| border="1" cellspacing="0" cellpadding="5" align="center"
    596 bytes (80 words) - 08:02, 2 January 2015
  • Gear
    .../blog.reprap.org/search?q=herringbone]; [http://forums.reprap.org/read.php?1,33645]; [http://blog.reprap.org/search?q=rack]; [[RBS/Rack]] {| border="1" cellspacing="0" cellpadding="5" align="center"
    1 KB (159 words) - 08:01, 2 January 2015
  • Darwin corner bracket
    {| border="1" cellspacing="0" cellpadding="5" align="center"
    637 bytes (91 words) - 05:44, 19 August 2013
  • WineGlass
    {| border="1" cellspacing="0" cellpadding="5" align="center"
    477 bytes (63 words) - 08:07, 2 January 2015
  • Door handle
    ...e handle to screw onto the shaft (which is easy - just make the hole about 1 mm undersized and then the metal shaft will cut its own thread when you scr
    833 bytes (147 words) - 08:00, 2 January 2015
  • Comparison of Electronics
    {| border="1" cellspacing="0" cellpadding="2" class="wikitable sortable" || GPL || v1.4 || 1-2 || 3 (maximum, shared w/ Heaters) || 3 (maximum, shared with Fa
    16 KB (1,730 words) - 16:14, 26 April 2020
  • Darwin/Thermoplast Extruder
    {| border="1" [[image:ThermoplastExtruder_2_0-retaining-screw-1.jpg|thumb]]
    38 KB (6,703 words) - 17:54, 13 October 2013
  • Printing Material Suppliers
    ! Vendor !! Shipping location !! Material(s) !! 1.75&nbsp;mm !! 3&nbsp;mm !! Reviews & Additional notes. |[http://www.3druckstore.com/Filament:::1.html 3Druckstore] || DE
    40 KB (4,984 words) - 06:50, 27 June 2016
  • Building A Stripboard Comms Controller
    * C2-C5: 1&mu;F eletrolytic capacitors (with a voltage rating of 30V or higher). * A piece of stripboard with 2.54mm (0.1") spaced continuous track. It should be a minimum of 21 holes along the tr
    12 KB (1,987 words) - 05:01, 25 July 2015
  • Laser Cutter Notes
    1 Watt pigtail diode laser with optical head, different diodes with up to 25 ...ctors. The so called M140 variety can go easily up to 2Watt when driven at 1.4Ampers. With this quite more hefty diode you can expect to cut any color o
    16 KB (2,450 words) - 18:14, 16 July 2020
  • CMM
    *"Generic Touch Probe": we can mount a touch probe toolhead on a 2+1 axis machine like a CNC router, mill, or RepRap. This is convenient if we
    868 bytes (124 words) - 08:14, 2 January 2015
  • Builders/Lasercut Hints
    STEP 1: PREPARATION FOR THREAD RESTORATION ...bending the rod to break it is easier than cutting (use the nuts from STEP 1 to hold the rod close to the cut so you don't damage threads or bend the ro
    9 KB (1,585 words) - 02:42, 7 November 2010
  • Thermoplast Extruder Improvements
    |categories = Thermoplastic Extruder 1.0 1. Keeping the flow rate of the extruder well controlled (proportional to XY
    3 KB (461 words) - 08:25, 16 May 2015
  • Microcontroller Firmware Hints
    *Copy sub directories in reprap-arduino-firmware-1.3/library directory to Arduino hardware/libraries directory. *With reprap-arduino-firmware-1.3 you should end up with 14 sub directories below /libraries.
    15 KB (2,247 words) - 18:45, 13 July 2015
  • User Manual: Host Software
    usb 1-1: new full speed USB device using uhci_and address 2 usb 1-1: configuration #1 chosen from 1 choice
    5 KB (834 words) - 11:33, 2 July 2019
  • Nophead's Extruder Tweaks
    ...10/gm3-motor-suppressor.html here]. An RRRF version [[GM3 Noise Suppressor 1 0]] is under development details [http://blog.reprap.org/2008/09/new-board- ...gs are required at the bottom for hard plastics like PLA and ABS. Mine are 1.5mm x 9mm x 25mm and came from an A3 flat bed scanner's lid hinge. Note spr
    14 KB (2,350 words) - 17:08, 28 November 2014
  • Nophead's techniques for using Skeinforge
    Warm up to raft temperature and wait 1 minute for PTFE nozzle to expand and filament to melt above the PTFE / bras
    3 KB (580 words) - 06:37, 11 January 2015
  • Drexler Arm
    [[Image:drexler-arm-1.png|right|400px]] ...aterials shaft down the middle. The full design has 5 rotating joints and 1 extending segment.
    1 KB (163 words) - 07:12, 8 September 2013
  • Builders/Frank
    ...mmer months of 2007. He is a McWire Cartesian bot that uses the RepRap Gen 1 electronics and an Mk II extruder. Standard 200 step stepper motors from th Frank's frame is a McWire design built from 1" steel water pipe and fittings. The frame is bolted to a piece of MDF for s
    16 KB (2,747 words) - 19:57, 27 April 2011
  • Build a reprap
    '''Step 1:''' If you have Windows, go to [[http://goodbye-microsoft.com/ Here]], get
    10 KB (1,695 words) - 12:12, 7 March 2013
  • Lego RepStrap
    [[Image:Legorap1c01.jpg|500px|Step 1]]
    3 KB (405 words) - 17:47, 9 November 2015
  • PIC Current Limiter
    == Adding Current Limiters to the PIC/Generation 1 Electronics == The PIC/Generation 1 electronics do not have any form of current limitting. They rely on the ste
    2 KB (271 words) - 20:27, 26 November 2011
  • FTIStrap
    This page describes the "FTIStrap", a RepStrap [1,2] which is almost completely built from fischertechnik [3] parts. Construc * position accuracy: approx. 0.1 mm in all directions (i.e., approx 256 lpi)
    66 KB (10,989 words) - 03:03, 28 April 2012
  • Builders/ReplathHowto
    === Step 1 === [[Image:ReplathPenSetup1.png|Pen Setup Step 1]]
    4 KB (593 words) - 04:06, 29 December 2014
  • Builders/Config Methods/de
    == Fehler in der GCode-Firmware 1.4 bei Verwendung von Gleichstrommotoren == #define EXTRUDER_0_STEP_ENABLE_PIN (byte)-1
    3 KB (540 words) - 13:22, 25 November 2011
  • RepRap in italiano - RepRap in Italian/Costruire una reprap
    '''Passo 1:''' se avete Windows, andate [[http://goodbye-microsoft.com/ Qui]], scarica [http://store.RRRF.org/product_info.php?cPath=1&products_id=78 Complete Arduino Electronics Kit] ordinato insieme al microc
    12 KB (1,752 words) - 18:23, 28 November 2014
  • RepRap in italiano - RepRap in Italian/Assemblatori
    There is a dedicated [[http://forums.reprap.org/read.php?1,17299 forum thread here]] for discussion of this Builder's wiki, what shoul
    4 KB (636 words) - 08:32, 8 July 2014
  • ActionCar
    [[Image:ActionCar ABS print.jpg|thumb|right|300px|ABS print of a 1/2 scaled down Action Car Chassis]]
    670 bytes (115 words) - 10:24, 26 June 2011
  • BrainGear
    {| border="1" cellspacing="0" cellpadding="5" align="center"
    543 bytes (85 words) - 10:38, 26 June 2011
  • Builders/McMaster-Carr Part Numbers
    1 40mm long piece of M6 brass bolt with a 3mm hole drilled right down the mid 1 M5 nyloc nut 90576A114 [http://www.mcmaster.com/nav/enter.asp?partnum=90576
    6 KB (862 words) - 17:55, 13 October 2013
  • Hardware Store (HS) Extruder
    {|border="1" |1
    4 KB (577 words) - 19:58, 18 July 2011
  • Host software liveusb image
    * 1 Gb USB flash drive or larger * Atleast 1 gb ram (for the host software)
    4 KB (675 words) - 17:19, 4 March 2012
  • Puzzles
    {| border="1" cellspacing="0" cellpadding="5" align="center" ! Difficulty (1 = easy, 10 = impossible)
    1 KB (155 words) - 08:03, 2 January 2015
  • Builders/Config Methods
    == Bug in GCode firmware 1.4 using DC motors == #define EXTRUDER_0_STEP_ENABLE_PIN (byte)-1
    3 KB (516 words) - 13:21, 25 November 2011
  • Builders/Config/Getting Started
    STEP 1: Do a pre-flight check. Look round all the RepRap joints and mechanisms, lo * Test 1 - direction. Carefully press X-axis HOME button keeping your hand on the Em
    4 KB (703 words) - 18:04, 28 November 2014
  • ArduinoSend
    Normally, the arduino is reset by dropping the DTR line for 1 second. Since the Arduino takes several seconds to reboot, you will want to
    3 KB (501 words) - 10:12, 7 May 2015
  • Builders/Metalab/AoI MetaCAD
    The size parameters defaults to 1 Defaults to cylinder(1, 1, 1, 1)
    5 KB (816 words) - 06:34, 11 January 2015
  • Burning the Sanguino Bootloader
    ...ore. The Sanguino is now compilable and uploadable easily with Arduino IDE 1.0.4 or above using Optiboot loader. Atmega644p and Atmega1284p are now buil ...p board's ISP header. Orientation is critical (red wire corresponds to pin 1)!
    3 KB (446 words) - 08:20, 4 October 2013
  • A self-organising peer-to-peer cell-based wi-fi network
    * 1. It attenuates its power in proportion to the proximity of its other interl ...ly interrogates any new node to ensure that it conforms to characteristics 1 and 2. If the new node does not, its signals are not relayed.
    4 KB (615 words) - 13:45, 12 May 2015
  • Art of illusion
    === 1. Getting started === ...have the cursor click to one tenth of that, so everything I design is on a 1 mm grid. This gives precision, but the screen isn't filled with lots of gr
    18 KB (3,206 words) - 06:33, 11 January 2015
  • ArcCompensation
    {| border="1" | 1 || 1.28
    4 KB (695 words) - 05:12, 19 July 2015
  • Useful Software Packages
    .../labs.autodesk.com/utilities/fusion/ Autodesk Labs] and is good until June 1, 2011. A Mac native preview has been unveiled and is planned to be availabl ====Stripboard Designer 1.0====
    27 KB (4,082 words) - 12:06, 26 October 2021
  • Calibration
    ...e motors just start running. Then give the trim port a final turn of about 1 eighth of a turn and your should be good to go. When using Marlin firmware change X_ENABLE_ON from 0 to 1.
    41 KB (6,863 words) - 16:15, 31 March 2020
  • Sandbox
    <math> 1 + 1 = 2 </math> ...\frac{\ln\left ( \frac{R}{R_{0}} \right )}{(\frac{1}{T + 273.15}) - (\frac{1}{T_{0} + 273.15})}
    2 KB (326 words) - 12:33, 13 July 2014
  • Mendel frame
    | z-leadscrew-base||1||2||Assembly Total # of assemblies: 1
    17 KB (2,708 words) - 06:17, 9 April 2014
  • Darwin/Arduino GCode Interpreter
    This variable stores how many steps to take to move the X axis 1 inch. You will need to set this as accurately as possible if you want your ..."-20 threaded rod means that there are 20 threads per inch (aka 20 turns = 1 inch.) Simply take that number and multiply it by the steps in a revolutio
    7 KB (930 words) - 20:54, 7 July 2011
  • Darwin/AssemblingDarwinElectronics
    {| border="1" ...pper exerciser window is useful for this.) Get the platform to stop about 1 mm below the nozzle.
    11 KB (1,620 words) - 09:09, 28 January 2013
  • Clone Wars: Zoltan
    ## <s>Ramps 1.4</s> *Ramps 1.4 + 5 pololus (+disipadores) + Mega 2560 + Hotbed MK2b + Correas GT2 + Pole
    4 KB (626 words) - 06:18, 22 May 2013
  • Darwin/BOM Notes
    * The toothed pulleys supplied by McMaster fit a 1/4" shaft. For the Y and Z axes, these need to be bored out to 8mm. The X pu * On the generation 1 extruder board, the value of C3 should be 100nF for normal operation. Also
    1 KB (219 words) - 14:01, 25 November 2011
  • Darwin/BackgroundPage
    {| border="1" * 1. The number of them in existence and the wealth they produce can grow expon
    12 KB (1,911 words) - 17:56, 13 October 2013
  • Mendel Electronic Wiring
    Start by wiring up the 12-volt power cables. You'll need 1.1 m of twin wires. ...tely above is looking into the socket (female) and at the pins (male). Pin 1 is the ground (negative) connection and pin 2 is +12v connection. Pin 3 is
    7 KB (1,178 words) - 22:37, 4 February 2024
  • Mendel USB and power connector
    ...ely above is looking into the socket (female) and at the pins (male). Pin 1 is the ground (negative) connection and pin 2 is +12v connection. Pin 3 is ...R Future Technology Devices International Ltd.], [http://parts.digikey.com/1/parts/1501998-module-usb-ser-uart-ft232-24-dip-um232r.html Digi-Key], or fr
    5 KB (921 words) - 21:28, 24 November 2023
  • Mendel materials procurement
    1) 370 + 234 + 370, remainder=26 ...£10||Camiel's [http://www.mendel-parts.com/index.php/catalog/electronics-1/sets.html Gen6 electronics] + Shipping
    9 KB (1,448 words) - 13:14, 7 June 2018
  • Extruder/Mendel
    Assembly qty: 1 | Thermal-barrier and nozzle||1||1||Assembly
    11 KB (1,944 words) - 06:23, 18 March 2014
  • Mendel X-axis
    Total # of assemblies: 1 ...obot-m4/printed-parts/x-carriage-lower_1off.stl x-carriage-lower_1off]||1||1||RP
    15 KB (2,201 words) - 00:49, 5 February 2024
  • Mendel Z-axis
    ...arts/z-leadscrew-base-bar-clamp_2off.stl z-leadscrew-base-bar-clamp_2off]||1||2||RP ...n-robot-m4/printed-parts/z-leadscrew-base_2off.stl z-leadscrew-base_2off]||1||2||RP
    8 KB (1,124 words) - 06:24, 18 March 2014
  • Mendel Y-axis
    Total # of assemblies: 1 ...//www.thingiverse.com/thing:1625 #2] [http://blog.arcol.hu/?p=312 #3])||1||1||RP
    8 KB (1,156 words) - 00:56, 5 February 2024
  • Mendel circuit boards
    Total # of assemblies: 1 | motherboard-plate.par||1||1||Sheet [[Media:Mendel motherboard-plate.par.png|image]] [[Media:Motherboard
    2 KB (310 words) - 15:14, 25 November 2011
  • Belt splitter jig
    | belt-width-adjuster_1off||1||1||RP | Box cutter/Stanley blade||1||1||Blade
    2 KB (353 words) - 05:07, 17 December 2011
  • Commissioning
    If you have a 5mm splined shaft, with no gearbox, on a motor with a 1.8 degree step, and 3mm feedstock, a good starting point is: If you have a 3/16" splined shaft, with no gearbox, on a motor with a 1.8 degree step, and 3mm feedstock, a good starting point is
    10 KB (1,533 words) - 18:44, 13 July 2015
  • 3D scanning
    ...king a 3D file of an object just using a camera or a camcorder with either 1) a projected grid from a video projector or 2) a projected line(s) from low *"Generic Touch Probe": we can mount a touch probe toolhead on a 2+1 axis machine like a CNC router, mill, or RepRap. This is convenient if we
    8 KB (1,235 words) - 04:31, 21 October 2016
  • Mendel/it
    Quì si trovano i file in 3d per [http://objects.reprap.org/mediawiki/images/1/1a/MendelSolidworks.zip - Solidworks 2010 - 18mb] delle parti meccaniche ed ...3 mm.|| [[PLA]], [[HDPE/it|HDPE]], [[ABS]] e altri. Utilizza filamenti ø 1/8”.
    5 KB (698 words) - 01:06, 5 February 2024
  • Mendel
    ...]] & more. Uses ø 3 mm filament.|| [[PLA]], HDPE, [[ABS]] & more. Uses ø 1/8” filament.
    4 KB (654 words) - 23:01, 1 February 2024
  • PCB adaptions for Mendel
    1. Install Molex conectors on your stepper motors (all except the extruder mo | Stepper Motor Driver v2.3||1||3||
    10 KB (1,752 words) - 08:13, 27 November 2011
  • Circuit board construction
    ...sor as CPU, they all can drive bipolar stepper motors all provide at least 1/8 microstepping and they all run the same firmwares ( = controller software {| border="1" cellspacing="0" cellpadding="2"
    3 KB (446 words) - 04:27, 26 November 2015
  • Génesis
    1. El número de ellos en existencia y producir una riqueza que puede crecer Texto de Adrian Bowyer, 2 de febrero 2004, actualizado: 21 de junio 2005, 1 de diciembre2005, 24 de febrero 2006, 18 de mayo 2007
    12 KB (2,138 words) - 06:15, 26 November 2011
  • Eiffel
    The first version will have a footprint of ~1 ft x 2 ft (30 cm x 60 cm), and a workspace of 1) Thermoplastic: like a normal RepRap
    8 KB (1,243 words) - 11:25, 28 October 2013
  • Mendel/es
    .... Usa filamentos de ø 3 mm.|| PLA, HDPE, ABS y más. Usa filamentos de ø 1/8” filament. ...n||Resolución del cabezal 0.5 mm, 2 mm tamaño característico mínimo, 0.1 mm posicionamiento de precisión, capa thk 0.3 mm||Resolución del cabezal
    4 KB (651 words) - 18:52, 28 November 2014
  • RBS/Beam
    You can make RBS beam from cutting 1/2" sheet with a laser cutter. ...beams from thin plywood sheet. Just cut long thin, dovetail-edged strips, 1" or 2" wide and glue them together.
    4 KB (618 words) - 23:30, 19 November 2013
  • Mendel parts more info
    {| class="wikitable" border="1" | 1
    15 KB (2,229 words) - 15:15, 25 November 2011
  • Measurement/Circle Test
    You really want a 1-2-3 block and an edge-finder, but that adds $50+ to the price of your machi
    1 KB (184 words) - 17:11, 28 November 2014
  • Canadian Suppliers
    ! Material(s) !! 1.75&nbsp;mm !! 3&nbsp;mm !! Reviews & Additional notes ...e the filament you are looking for, you can make a backorder and get it in 1 week ||
    11 KB (1,492 words) - 16:31, 18 September 2017
  • CNC Router
    ...C Router able to handle raw materials that come in a "full-sized sheet" of 1.2 m × 2.4 m ( 4 feet × 8 feet, aka "four by eight") slab. It may be a [[ Zenbot has several CNC routers for under $ 1 500 (not including the spindle).
    7 KB (1,100 words) - 17:04, 13 April 2020
  • Casting/Pewter
    ...really hot (and thus safely dry) I poured in the pewter and left it for a 1/2 hr or so to cool off gently. I definitely did not impatiently have-to wit
    4 KB (663 words) - 22:24, 14 January 2016
  • Materials/Appropriate Machines
    Also, we need to distinguish between 2D, 2D+1, and 3D form factors for the end object. ...n ... [http://forums.reprap.org/search.php?0,search=laminated,author=,page=1,match_type=ALL,match_dates=0,match_forum=ALL,match_threads=0 other discussi
    3 KB (355 words) - 19:33, 9 November 2021
  • About
    ...first imperfect replicator. ''3D Printing and Additive Manufacturing,'' 1(1), pp.4-5. https://www.liebertpub.com/doi/abs/10.1089/3dp.2013.0003 ...turn on Investment for Open-Source 3-D Printers]. ''Technologies'' 2017, 5(1), 7; doi:10.3390/technologies5010007 [https://www.academia.edu/31327768/Eme
    11 KB (1,573 words) - 09:29, 6 May 2024
  • Community portal
    [[#Getting involved|1 Getting involved]]<br /> ...n how to get a new RepRap wiki account: [http://forums.reprap.org/read.php?1,641102 How to get a new RepRap wiki account]
    7 KB (1,046 words) - 08:51, 19 October 2021
  • Epoxy granite
    |url = [http://dev.forums.reprap.org/read.php?1,9376 Forum Thread] Image:Mixing 1.jpg|Mixing 1
    5 KB (785 words) - 11:37, 1 December 2014
  • Metal Mendel
    ==Version 1 Errata==
    7 KB (1,239 words) - 12:27, 21 September 2015
  • Wooden Mendel
    ...-bearing plates & mirror are very difficult to make from wood. Get some 1/16th inch (scant 2mm) aluminum sheet and a hacksaw. Cut 4 25mm x 36mm rect
    4 KB (712 words) - 04:04, 25 April 2011
  • Laser Cutter/Background
    20" high, cut from 1/8" baltic birch, selling on etsy for $88. This
    6 KB (902 words) - 16:50, 13 April 2020
  • Filament Jamming Detection
    [[File:FilamentDetectImage1.png|thumb|Image 1 - Illustration of one possible approach]] * Part 1: [http://www.thingiverse.com/thing:1790228]
    6 KB (1,032 words) - 12:40, 11 December 2017
  • Java Software Preferences File
    === FoundationLayers=-1 === ...n under the object being built before building proper starts. Set this to -1 to suppress the laying down of foundations.
    22 KB (3,532 words) - 17:59, 28 November 2014
  • RepOlaRap
    1. Use 13mm for all moving parts to reduce weight.
    6 KB (888 words) - 23:49, 19 November 2013
  • NEMA Motor
    ...f their [[faceplate]] in tenth of inches. So a "NEMA 17" has a 1.7 inch by 1.7 inch faceplate. By standardizing the stepper motors (the faceplates, [[fl * <tt>NEMA 34D016</tt> 3.4" diameter stepper motor, that is 1.6" long, with a flange.
    5 KB (718 words) - 05:20, 7 September 2015
  • Metal deposition print head
    ...l-stress-distributions-multilayer-laser-solid-freeform-fabrication-process-1/ interesting, computational simulation of thermal distortion and stress dur ...d stress, to form a cylindrical shell of radius r where: r=(α*dT/dz) -1 ( 1)
    84 KB (13,534 words) - 22:26, 14 January 2016
  • PMMA
    ...box frame, made of wood, is actually a much stronger frame, regardless of 1/Appearance, a 'value added' feature sought by those who buy 'Acrylic 3D Pri
    3 KB (483 words) - 04:58, 14 February 2021
  • Delta
    ==Prototype 1== [[Image:Delta Prototype 1 upside down.jpg|300px| Delta prototype 1 upside down]]
    9 KB (1,398 words) - 13:09, 21 October 2016
  • T-Rep
    ...is a prototype printer built primarily from 80/20 [[T-Slot]] extrusion and 1/8" aluminum plate.
    361 bytes (40 words) - 20:49, 12 January 2020
  • LeBigRep
    ...rger_RepRap|scaled up]] 3dprinter which would produce large objects with a 1 m3 max. dimension. big enough for printing a chair, a table, prosthetics, h
    953 bytes (132 words) - 01:53, 5 February 2024
  • SpoolHead
    1. Controllably feeding the wire from the spool;
    9 KB (1,361 words) - 20:28, 23 January 2013
  • Bluetooth Wireless Communication
    1) You need to get yourself a Bluetooth dongle, if your PC doesn't have inte Type '''SU,96,8,0,0,1'''
    6 KB (965 words) - 05:22, 30 December 2014
  • Support Extruder
    ...led plans for building a support extruder tool head, see [[SupportExtruder 1 0]].''
    3 KB (497 words) - 09:14, 17 April 2014
  • Heated Bed
    ...te PVA based glue like Elmer's Glue-All or School Glue. The ratio is about 1 part glue to 10 parts water. Apply it to a hot bed and allow the solution t Folks at the 3d printing brazil group have discovered that a solution of 1:10 jello to water adhere both PLA and ABS if the heated bed is over 60°C,
    31 KB (5,100 words) - 21:49, 11 November 2018
  • Pirated CupCake
    ...paste, the plate was sandwiched between 2 kapton sheets, and covered with 1.5mm aluminium sheet. ...we were able to operate the boards, now supplemented with a Stepper Driver 1.2 for the Z axis. After finally getting everything running, the CupCakeStra
    24 KB (3,862 words) - 23:34, 19 November 2013
  • Wade's Geared Extruder
    [http://grabcad.com/library/wade-s-geared-extruder-onshape-cad-1 GrabCAD] ...Onshape] or [http://grabcad.com/library/wade-s-geared-extruder-onshape-cad-1 GrabCAD]
    10 KB (1,618 words) - 09:33, 5 November 2016
  • Arduino Mega Pololu Shield
    ...ersion 1.25 or [[Generation 7 Electronics]]. Version 1.25 and earlier are "1.5 layer" designed boards (i.e. it's double sided board, but one of layers c ...nds with the version you are building [[RAMPS1.4]],[[RAMPS1.3]] or [[RAMPS 1.2]]
    21 KB (3,268 words) - 16:19, 20 November 2018
  • Kapton Tape
    <br />--[[User:Nudel|Nudel]] 01:03, 1 October 2011 (UTC)</blockquote> <br />--[[User:jCollasius|jCollasius]] 22:40, 1 Mai 2015 (UTC)</blockquote>
    6 KB (829 words) - 19:20, 18 July 2016
  • Endstop/fr
    E.g: [[Gen7_Endstop_1.3.1|Gen7 Endstop]] and [[BIQ Opto Endstop|Opto Endstop]]. [[File:Gen7 Endstop 1.2 Assembled.jpeg|Gen7 Endstop v.1.3.1|300px|center]]
    5 KB (776 words) - 06:03, 16 May 2015
  • House Style
    1) I seem to have elected myself "Seniormost Library Gnome" and
    3 KB (465 words) - 12:46, 14 July 2014
  • Community/6x10000s Problem
    ...10,000 damn websites.''' 2-3 websites is better than 10,000 websites, and 1 website twice or thrice as good, because it means 10,000 less outgoing link
    3 KB (471 words) - 09:10, 13 January 2015
  • High Temperature Metal Casting
    * [http://www.theodoregray.com/PeriodicTable/PopularScience/2003/09/1/index.html microwave] ...nominally CaSO4·1/2H2O. It is created by heating gypsum to about 150 °C.[1]
    12 KB (1,854 words) - 08:17, 19 February 2013
  • Library/Notes
    ...them away, while still paying for the materials for each developer to make 1 mendel a year, and still have a nice ''booze-up'' with the rest of the non-
    12 KB (1,999 words) - 11:25, 28 November 2012
  • RepRap Buyers' Guide
    ...of people that have 50-1000 posts in our forums than people that have only 1 post, regardless of whether it's negative or positive. We have had some pro | Gear M, M2 || [http://forums.reprap.org/read.php?1,102156/ 1]
    16 KB (1,864 words) - 14:50, 29 February 2016
  • Gada Prize
    ...ated Bed Team]] - (Team: Casainho) - http://dev.forums.reprap.org/read.php?1,33327 *[[Cyberdyne T-1| Team Cyberdyne]] - (Team: JohnnyCooper) - Blog: http://teamcyberdyne.blogs
    5 KB (838 words) - 12:51, 2 June 2016
  • CAM Toolchains
    {|border="1" cellpadding="5" cellspacing="0" class="wikitable sortable" {|border="1" cellpadding="5" cellspacing="0" class="wikitable sortable"
    13 KB (1,741 words) - 17:07, 10 October 2019
  • McWire (Death March: Do not build!!!)
    ...printed parts for the mendel. Some people have had some success with using 1/2-16 rod instead. |1
    16 KB (2,625 words) - 05:11, 8 September 2013
  • Pick and Place ToolHead
    * 1 10 mm M2 screw, or whatever screw will couple with the shaft on the GM3 gea * 1 18 gauge blunt tip dispenser needle
    3 KB (521 words) - 01:42, 28 March 2017
  • Full Graphic Smart Controller Hacks
    0, 1, 255, 255, 255, 252, 0, 0, 1, 252, 0, 0, 0, 1, 248, 0,
    4 KB (273 words) - 00:00, 3 August 2015
  • Huxley
    1) Part 1 Frame Assemblies [http://www.youtube.com/user/RepRapLogPhase#p/u/6/vO1mSThu 2) Frame Integration Part 1 [http://www.youtube.com/user/RepRapLogPhase#p/u/4/ItHOGWUxghc]
    15 KB (2,299 words) - 05:46, 7 September 2015
  • Cyrus
    {| border="1"
    570 bytes (55 words) - 17:16, 10 April 2013
  • Laser Build Speed Calculator
    var out = '<table border="1"><tr><th>Results</th></tr>'; var passtime = cubes * ( 1 - fillfactor ) * depth / getValue('max_beam_speed'); // Time to pass cubes
    41 KB (5,323 words) - 20:36, 27 December 2014
  • Cubex to RepRap Conversion
    ...supply etc are replaced to produce a printer with a 300x300mm heated bed, 1, 2 or 3 hot-ends, a 24V power supply for the heated bed and electronics and
    7 KB (1,045 words) - 06:20, 2 March 2017
  • Development Pathway
    In particular, "3.1.3 Technological innovations" and "Appendix C". * extended auxiliary tools (Erik de Bruijn, "On the viability ..."; "3.1.3 Technological innovations")
    19 KB (2,841 words) - 18:46, 2 December 2022
  • PourStrap
    fixtures and rods, and you need to align them with 1-2-3 blocks, lego fixtures, 2 embedded nuts, 1 embedded rail + 1 throughhole, etc. Call
    10 KB (1,537 words) - 10:56, 18 February 2013
  • Joints for Delta Printer
    E.g. a backlash of 0.1 mm in joints can misalign the nozzle up to 1 mm (PositioningError = 2 x Backlash * RodLength / JointDistance) ...eltaJoints-Magnetic_Example_1.jpg|300px|thumb|right|Magnetic Joint Example 1]]
    9 KB (1,441 words) - 19:35, 3 February 2016
  • Combinatorics Problem
    User 1 uses w0, x0, y0, z0.
    9 KB (1,325 words) - 16:52, 12 June 2021
  • RUG/Danmark
    Lynddahl ABS Filament, a minimum of 2000m, price about 1,20kr per meter, roughly 20€/kg (at about 125m per KG) they are willingly
    3 KB (492 words) - 12:53, 25 November 2015
  • BEEF
    {| class="wikitable" border="1" ! Extruder 1
    9 KB (1,409 words) - 15:56, 2 September 2014
  • G-code
    | 1.23+ || The G-code is supported by version 1.23 and above. :RepRapFirmware version 1.19 and later (except within quoted strings)
    535 KB (81,549 words) - 15:50, 18 April 2024
  • Ceramic Extrusion
    ==Claystruder 0.1 (Stepper Driven Plunger)== ...p://www.fabathome.org/wiki/index.php/Model_1_1-Syringe_Tool Fab@Home Model 1 Syringe Tool] or with a more standard rotational stepper. Examples of the l
    14 KB (2,240 words) - 01:34, 19 April 2014
  • Generation 4 Electronics
    * Motor 1: untested =====Version: 1.1=====
    4 KB (441 words) - 03:52, 1 January 2012
  • Vaporware Electronics
    ...eprap.org/read.php?4,57039], fullspeceng[http://forums.reprap.org/read.php?1,26026] ) .../jeelabs.net/projects/tosca/wiki/Tosca_SSB_01 Tosca Single Stepper Board 0.1] is specifically designed to produce coordinated motion for desktop CNC mac
    11 KB (1,564 words) - 14:24, 15 January 2015
  • SLS Printer
    =Photo 1= first tests building a powder-based stereolithography printer: part 1
    14 KB (2,481 words) - 12:08, 28 October 2013
  • SGBot
    http://dev.forums.reprap.org/read.php?1,36581 [[Image:sg_bot1.jpg|frame|caption 1]]
    4 KB (693 words) - 23:55, 19 November 2013
  • Cyberdyne Hydraulic Control System
    ...s using a linear actuator to drive a syringe via another syringe at a 1 to 1 ratio. The purpose of this is to separate the heavy power source and the dr ...nhill battle from here. I intend to have a working prototype of both the T-1 and the Hydraulic Control System by May of 2010."
    3 KB (475 words) - 13:54, 25 November 2011
  • Cyberdyne T-800
    ...Competitor discussed in the Team Cyberdyne Forum thread, the [[Cyberdyne T-1]] and [[Cyberdyne Hydraulic Control System]] are necessary transitional mil From [[Cyberdyne T-1]]:
    2 KB (281 words) - 13:55, 25 November 2011
  • Cyberdyne T-600
    ...Competitor discussed in the Team Cyberdyne Forum thread, the [[Cyberdyne T-1]] and [[Cyberdyne Hydraulic Control System]] are necessary transitional mil From [[Cyberdyne T-1]]:
    2 KB (284 words) - 13:55, 25 November 2011
  • Step rates/de
    ...im Mikrometerbereich völlig unrealistisch, also machen 0,9°-Motoren und 1/32 Microstepping so gut wie keinen Sinn. Für die dabei auftretenden Kräft | 0,9°-Stepper, 14-Zähne-GT2-Pulley, 1/16 Microstepping
    11 KB (1,496 words) - 14:20, 1 May 2018
  • Mechanical Computer
    ...owered all-mechanical computer, which could also be considered a 6,000,000:1 scale model of a nano-computer." Suggests that a binary rod computer would
    5 KB (742 words) - 16:21, 2 December 2022
  • Mendel Variations/Catalyst
    **'''Inner Plate (1 x 2)''' **'''Outer Plate (1 x 2)'''
    8 KB (1,185 words) - 00:33, 5 March 2012
  • BowenBot
    ...tic discs connected to 4 inch nylon webbing. The conveyor is advanced by a 1 rpm AC gearhead motor. The webbing is stretched using a tensioning device a
    918 bytes (146 words) - 20:09, 8 February 2011
  • Sarrus Z Linkage
    Drill out all the small holes with a 1/16" drill bit, then use 1/16" brass rod to make hinge pins. ...0, 1/4 turn, 1/2 turn, and 3/4 turn, perhaps 8 chains at 0, 1/8, 1/4, 3/8, 1/2, 5/8, 3/4, and 7/8 turn? Or perhaps 6 chains vaguely similar to a [[Delta
    5 KB (734 words) - 10:13, 3 November 2013
  • Hydra-MMM Software and Firmware
    G30 - set reference point 1 G31 - return to reference point 1
    11 KB (1,833 words) - 06:52, 18 July 2015
  • Firmware/Constant Acceleration
    c = c - (2c / (4n + 1)) [Equation 13] n += 1
    4 KB (602 words) - 15:31, 5 June 2015
  • WolfStrap/de
    http://dev.forums.reprap.org/read.php?1,37355 ...m Bohrer gemacht. Da die Bohrer nie sehr genau sind, wird die Bohrung ca 3,1-3,2 mm. Die Bohrung in dem Teflonteil, dem Isolator, habe ich nur mit 2,8 g
    24 KB (3,931 words) - 23:40, 5 February 2024
  • Sarrus L04
    : ''Main page: [[RepRapServo 1 0]]'' Needs position feedback. Options: 1. Linear strip and quadrature sensor (scavenged from inkjet printers). 2.
    1 KB (151 words) - 00:23, 10 November 2010
  • Pololu Electronics
    ...Pololu-electronics'''. They are single sided, have no tracks thinner than 1.27mm (0.05"), and have no tracks running between pins, so they are reasonab [http://rapatan-rapatan.blogspot.com/2010/05/rapatan-shield-board-1-electronics-v10.html] Rapatan_Shield_base_board_V1.0
    20 KB (3,299 words) - 23:41, 5 February 2024
  • Wolfy1.1
    {{Languages|Wolfy1.1}} {{RepRapNavigation|name=Wolfy1.1}}
    2 KB (202 words) - 09:16, 26 March 2015
  • WolfStrap
    ...translate.google.co.uk/translate?js=n&prev=_t&hl=en&ie=UTF-8&layout=2&eotf=1&sl=de&tl=en&u=http%3A%2F%2Freprap.org%2Fwiki%2FWolfStrap page] http://dev.forums.reprap.org/read.php?1,37355
    24 KB (4,237 words) - 07:02, 3 September 2019
  • Kiwi-M5 Mendel Battle Tank
    |feedurl=http://forums.reprap.org/feed.php?151,69770,replies=1,type=rss ...could be bolted on the edge using 4 mm bolts, this then gives each bearing 1.5 mm exposure on each side of the 10mm sheet pieces. (See pictures of Y and
    35 KB (5,908 words) - 00:54, 21 April 2013
  • RepRap project FAQ
    {|border="1" ...ers work on a principle of pushing a 3mm rod of plastic through a heated 0.1-0.5mm wide orifice. Although there is work being done on an extruder which
    22 KB (3,459 words) - 11:28, 22 May 2017
  • RepRap Life Cycle Assessment
    ...in the report called: "[http://www.google.dk/url?sa=t&source=web&ct=res&cd=1&ved=0CAYQFjAA&url=http%3A%2F%2Fwww.americanchemistry.com%2Fs_plastics%2Fsec ...or PLA is taken from: "[http://www.google.dk/url?sa=t&source=web&ct=res&cd=1&ved=0CAgQFjAA&url=http%3A%2F%2Fwww.natureworksllc.com%2Four-values-and-view
    8 KB (1,258 words) - 04:30, 29 October 2012
  • Polar
    *http://dev.forums.reprap.org/read.php?1,38704 except the position is higher up 1 screw thread increment (Z). Then we don't need a separate Z motor.
    8 KB (1,430 words) - 12:26, 21 September 2015
  • MultiRep
    ...designing my latest creation, the MultiRep Mark 8. What happen to versions 1-7 you ask? Well, most of them were "learning" experiences. I actually got f
    7 KB (1,126 words) - 01:57, 25 November 2014
  • Molding Mendel Parts
    * ~250 g of polymorph, you can get 1 kg of Polymorph somewhere around 20$ * Put some water on the bottom of a pot. I filled somewhere 1,5 - 2 cm.
    4 KB (757 words) - 10:45, 27 October 2010
  • Release Agent
    {| border="1" {| border="1"
    838 bytes (100 words) - 03:39, 19 March 2010
  • RepRap II "Мендель"
    ...(?)(feature) 2 мм, точность позиционирования 0,1 мм, толщина слоя 0,3 мм
    6 KB (147 words) - 05:16, 2 October 2014
  • Конструирование электрической части
    4 KB (135 words) - 04:43, 26 November 2011
  • Монтаж проводов
    Start by wiring up the 12-volt power cables. You'll need 1.1 m of twin wires. ...tely above is looking into the socket (female) and at the pins (male). Pin 1 is the ground (negative) connection and pin 2 is +12v connection. Pin 3 is
    7 KB (1,085 words) - 23:53, 5 February 2024
  • Laser Cutter/de
    1 Watt 'pigtail' Diodenlaser mit Fokussier-Optik, verschiedene Laserdioden bi 1. Laser-Quellen:
    8 KB (979 words) - 17:27, 25 December 2019
  • AlreadyDoneList
    * [http://reprap.org/Downloads/extruder/extruder.html Version 1 of a Polymorph Extrusion Head] designed for rapid prototyping production (A
    4 KB (634 words) - 15:44, 7 October 2012
  • Arduino GCode Interpreter
    This variable stores how many steps to take to move the X axis 1 inch. You will need to set this as accurately as possible if you want your ..."-20 threaded rod means that there are 20 threads per inch (aka 20 turns = 1 inch.) Simply take that number and multiply it by the steps in a revolutio
    6 KB (939 words) - 06:33, 11 January 2015
  • AssemblingDarwinElectronics
    {| border="1" ...pper exerciser window is useful for this.) Get the platform to stop about 1 mm below the nozzle.
    9 KB (1,621 words) - 09:45, 14 December 2014
  • AssemblingDarwinMachinery
    ...m the home positions the axes can achieve repeatable movements to within 0.1 mm. You'll need a good bit of bench space, something in the region of 1 m x 2 m should be fine. At least half a meter square of this space should b
    50 KB (8,709 words) - 12:15, 28 January 2013
  • BOM Notes
    * The toothed pulleys supplied by McMaster fit a 1/4" shaft. For the Y and Z axes, these need to be bored out to 8mm. The X pu * On the generation 1 extruder board, the value of C3 should be 100nF for normal operation. Also
    1 KB (216 words) - 19:50, 26 November 2011
  • Wealth Without Money
    {| border="1" * 1. The number of them in existence and the wealth they produce can grow expon
    11 KB (1,864 words) - 07:42, 7 March 2016
  • BuildingAStripboardExtruderController
    {{Deprecated|DarwinExtruderController 1 2}} * C1: 1&mu;F electrolytic or tantalum capacitor(*)
    8 KB (1,325 words) - 20:07, 26 November 2011
  • Building A Stripboard Stepper Controller
    {{Deprecated|DarwinExtruderController 1 2}} * A piece of stripboard with 2.54mm (0.1") spaced continuous track. It should be a minimum of 23 holes along the tr
    7 KB (1,090 words) - 06:34, 29 November 2014
  • Builders/Config Methods/cs
    == Chyba v GCode firmwaru 1.4 při použití DC motorů == #define EXTRUDER_0_STEP_ENABLE_PIN (byte)-1
    3 KB (564 words) - 16:22, 1 March 2014
  • BuildingTheStepperMotorControlBoards
    {| border="1"
    2 KB (257 words) - 20:09, 26 November 2011
  • CSGOffsetting
    ...stage as (virtually) dunking the part as-designed in acid and melting away 1/2 the width of the extrusion, creating a smaller "core". ...he (virtual) "core", the plastic expands to 1/2 the width of the extrusion(1) in every direction from that point, enough to (hopefully) touch the origin
    4 KB (588 words) - 05:11, 19 July 2015
  • CartesianAssemblyFAQ
    == 1. General Questions ==
    2 KB (270 words) - 06:22, 27 November 2011
  • CartesianBot SNAP V1
    = Cartesian Robot SNAP Protocol Version 1 =
    487 bytes (67 words) - 06:34, 11 January 2015
  • CheltenhamScienceFestival2008Do-list
    {| border="1"
    960 bytes (128 words) - 19:57, 26 November 2011
  • DC digital servomotor
    === 1. Introduction ===
    6 KB (1,035 words) - 06:45, 13 May 2016
  • DC Motor Driver 1 0
    {{Deprecated | DC Motor Driver 1 1}} ...et/project/downloading.php?group_id=159590&filename=reprap-dc-motor-driver-1.0-r1.zip download the release file] from SourceForge that has a bunch of he
    16 KB (2,496 words) - 10:31, 8 June 2013
  • DC Motor Driver 1 1
    You can [http://downloads.sourceforge.net/reprap/reprap-dc-motor-driver-1.1.zip?use_mirror=osdn download the release file] from SourceForge that has a {| border="1"
    17 KB (2,658 words) - 13:05, 24 June 2014
  • DarwinConceptImprovements
    {| border="1"
    2 KB (374 words) - 09:37, 26 November 2011
  • DarwinDesignFaults
    {| border="1"
    1 KB (203 words) - 09:37, 26 November 2011
  • DarwinExtruderController
    {{Deprecated|DarwinExtruderController 1 2}} = Extruder Controller Board - v1.1 =
    12 KB (1,936 words) - 00:20, 12 September 2013
  • Extruder Controller Board v1.2
    {| border="1" | R1 || 10K ohm || 1 || [[Resistor|Resistor]] || [http://www.mouser.com/search/productdetail
    14 KB (2,352 words) - 17:21, 29 October 2015
  • Opto Endstop v1.0
    {{Deprecated|Gen7 Endstop 1.3.1}} You can [http://downloads.sourceforge.net/reprap/reprap-opto-endstop-1.0.1b.zip?modtime=1181187177&big_mirror=0 download the electronics files fro
    7 KB (1,036 words) - 15:24, 23 July 2015
  • DarwinPartDevelopment
    {| border="1" ...ropped. || [[[[image:DarwinPartDevelopment-Bed-corner-1.1.stl|Bed-corner-1.1.stl]] |thumb]]
    6 KB (577 words) - 09:39, 26 November 2011
  • DarwinPowerAndCommunicationsCard
    = Power Distribution and Communications Board - v1.1 = {| border="1"
    16 KB (2,457 words) - 09:39, 26 November 2011
  • DarwinPowerAndCommunicationsCardTest
    {| border="1" ...uniqueparts/id/57/bjtemplate/blank" width="100%" height="400" frameborder="1"></iframe>
    13 KB (2,131 words) - 09:40, 26 November 2011
  • Power Distribution and Communications Board v1.2
    ==== v1.2.1 ==== You can [http://downloads.sourceforge.net/reprap/PowerComms-1.2.zip?modtime=1180374732&big_mirror=0 download the electronics files from S
    15 KB (2,450 words) - 04:46, 25 July 2015
  • DarwinStepperController
    {{Deprecated|DarwinExtruderController 1 2}} {| border="1"
    3 KB (430 words) - 20:08, 26 November 2011
  • Stepper Motor Controller Card v1.2
    {| border="1" {| border="1"
    6 KB (890 words) - 04:51, 25 July 2015
  • DeviceMessages
    {| border="1" | Reply: || 1 byte: Minor version <br/> 1 byte: Major version
    2 KB (238 words) - 06:35, 11 January 2015
  • DocumentationMain
    * [[McWire Cartesian Bot 1 2]] * [[SupportExtruder_1_0|Support Extruder v0.1]] - our new support material extruder
    12 KB (1,622 words) - 05:39, 4 September 2015
  • Electrochemical Machining
    |feedurl=http://forums.reprap.org/feed.php?35,83032,replies=1,type=rss ...ap moves axes with a M8 threaded rod, so very slow movement speeds, like 0.1&nbsp;mm/min are possible.
    18 KB (2,902 words) - 10:27, 4 November 2013
  • EndMatching
    ...ber, it backtracks (to the immediately-previous point that generated E<sub>1</sub>) and replaces all the little line segments in between with that one l
    7 KB (1,250 words) - 05:11, 19 July 2015
  • ExtruderController
    * 1 byte: Response type (0) * 1 byte: minor version number
    4 KB (545 words) - 06:36, 11 January 2015
  • ExtruderIO
    ...the I/O of the [[DarwinExtruderController 1 2]], part of the [[Generation 1 Electronics]] originally designed for the first version of [[RepRapOneDarwi VREF = 1.25 + 5 * VR / 32
    20 KB (3,214 words) - 02:37, 4 March 2014
  • ExtruderImprovementsAndAlternatives
    ...i gear-bush-holder.aoi file] that is in two parts called holder-no-support-1 and ...ainst the surface of the PTFE. Using a small electric hand drill, drill a 1.5mm diameter hole through the PTFE along a chord (i.e. not along a diameter
    19 KB (3,267 words) - 16:49, 28 November 2011
  • Extruder Controller 2 0
    The outputs are labeled Motor 1 and Motor 2. Each motor has an A and B output. There are also LEDs associ {| border="1"
    18 KB (2,967 words) - 20:19, 26 November 2011
  • Extruder Controller 2 1
    = Extruder Controller v2.1 = The reset button on the Extruder Controller v2.1 board is broken. If you have this board, you will need to manually reset i
    31 KB (5,027 words) - 20:19, 26 November 2011
  • Extruder Controller 2.2
    {| border="1" | 1A || H-bridge Positive #1 || Motor 1
    35 KB (5,524 words) - 18:33, 18 November 2014
  • Extruder SNAP V1
    = Extruder Controller SNAP Protocol Version 1 = * 1 byte status (0=full, 1=empty)
    2 KB (225 words) - 06:36, 11 January 2015
  • Old RepRap project FAQ
    * R2 1.5K Resistor ...massive figure for V/m. My rule of thumb is to go for a voltage at least 1.5 times the maximum that they will experience in circuit. "Working voltage
    26 KB (4,452 words) - 14:31, 29 February 2012
  • FillerMaterials
    1)Sand, sand dust
    721 bytes (106 words) - 20:18, 28 February 2014
  • Firmware build process
    ...irmware build process for Darwin hardware using PIC 16F648 in [[Generation 1 Electronics]]. make[3]: *** [pobj.o ] Error 1
    4 KB (586 words) - 11:46, 4 May 2012
  • Gear design
    ...etween teeth is notionally along a point just over half way (typically a 1:1.25 split) up the teeth, and this is called the 'Pitch Line'. The bit above ...st Common Divisor (GCD) of each gear tooth count equals 1. e.g. GCD(16,25)=1
    12 KB (2,042 words) - 21:54, 26 October 2015
  • GearMotorStepper
    ...achieved so far appears to be about 7.5 degrees. For a threaded rod with a 1 mm pitch that gives us a resolution of 0.021 mm.
    2 KB (396 words) - 12:49, 30 April 2014
  • GearedBoxForGM3Motor
    ...deatils a design to gear the Solarbotics GM3 motor down by approximately 3:1.
    246 bytes (34 words) - 05:07, 17 December 2011
  • Generation 1 Electronics
    = Generation 1 Electronics = [[Category:Generation 1 electronics| ]]
    4 KB (659 words) - 15:27, 23 July 2015
  • Generation 1 firmware
    [[Category:Generation 1 firmware| ]]
    868 bytes (109 words) - 15:18, 28 August 2015
  • Generation 2 Electronics
    ...google.com/p/sanguino/downloads/detail?name=reprap_motherboard-electronics-1.0.zip&can=2&q= Sanguino RepRap Motherboard] that makes the connections easi === DC Motor Driver v1.1 ===
    14 KB (2,223 words) - 09:27, 26 November 2011
  • Generation 2 firmware
    ...> there is a line that says <tt>#define EXTRUDER_COUNT 1</tt>. Change the 1 to 2 if you have two extruders. ...f the number of steps of the stepper motors that your RepRap does to cover 1 mm. Change these if need be. If you are not sure exactly what the gearing
    16 KB (2,592 words) - 06:53, 18 July 2015
  • Generation 3 Electronics
    * 1 [[Motherboard_1_2|RepRap Motherboard]] (''mendel/electronics/motherboard'') * 1 [[Mendel USB and power connector]] (no Eagle design - it's a simple piece o
    10 KB (1,606 words) - 20:53, 19 February 2012
  • Glossary
    * Plastic material made into (often 3 mm or 1.75mm) string to be used as raw material in 3D printers. * Extruded plastic (often < 1 mm).
    17 KB (2,735 words) - 22:34, 1 May 2024
  • PSMD Triple Axis Stepper Driver
    ...laining the settings. The options are Full-stepping, 1/2, 1/4, 1/8th , and 1/16th microstepping.<br/>
    4 KB (586 words) - 05:56, 29 November 2014
  • Gputils
    ...ls for the Microchip (TM) PIC microcontrollers. The version marked 0.13.4-1 in the Ubuntu and Debian repositories seem to share a common flaw, so we've ...rce package with <tt>wajig source gputils</tt>, fetching the latest 0.13.4-1 files from the gputils repository on SourceForge with
    968 bytes (146 words) - 18:38, 26 November 2011
  • Half-roundWasherBearing
    ==== 1. Summary ==== ...me workshops. Fortunately, a servicable alternative can be made from M3 or 1/8 inch washers.
    3 KB (434 words) - 05:08, 17 December 2011
  • HandmadeGears
    ...gnment holes. Remove the clamp and bolt. Mark the sheets from the top down 1,2,3 & 4 with an indellible marker, as in the image on the right (note: some Using an 8mm drill bit drill out the centre holes on sheets 1 & 4. This will allow an M8 bolt or section of rod to go through the mould,
    4 KB (722 words) - 17:03, 28 November 2011
  • HighTemperatureMaterials
    After 3 1/2hrs, the stuff still isn't set. This batch is much slower for no obvious r ...r 10c a piece...) to allow it to be threaded onto the heater barrel. After 1/2hr the plaster was shaped with a rasp to remove unwanted protrusions.
    10 KB (1,794 words) - 19:25, 26 November 2011
  • HintsForUsingTheStratasysDimensionRPMachine
    1) The download for the full 30-page manual which will walk you through the c ==== 1. MANUAL DOWNLOAD ====
    6 KB (786 words) - 17:11, 28 November 2011
  • HyperbolicSpeed
    For example, a speed value of 255 will wait for a period of 256 - 255 = 1 time unit between each step or pulse. ...at a speed of 255 is twice as fast as a speed of 254. A PIC speed of 0 is 1/256th as fast as 255.
    3 KB (525 words) - 06:36, 11 January 2015
  • IOBox
    * 1: Set outputs {| border="1"
    1 KB (187 words) - 17:17, 28 November 2011
  • PIC in-circuit programming
    [[Category:Generation 1 electronics]]
    3 KB (495 words) - 15:28, 23 July 2015
  • InterchangeableNozzleMk2
    ...drill bit. Drill your nozzle's hole into the bottom of this hole, going in 1.5mm-2mm. As the drill bit does not emerge from the other side of the rod ye Screw the rod into that M6 nut about 1/3 the way down it leaving the little hole and untidy sawn-off end pointing
    6 KB (996 words) - 17:24, 28 November 2011
  • InvoluteProfile1
    Suppose that you want to design a 3:1 ratio gear pair. Using the 3:1 proportion you then need to apply that proportion to deciding the radii of ...Distance''' measure gives the thickness of the gear. The default value is 1 mm. Set it to 10 mm for this example. '''Again don't try to do anything u
    6 KB (960 words) - 08:01, 2 January 2015
  • ItemsMade
    {| border="1" width="100%" cellpadding="2" cellspacing="2" [[image:ItemsMade-wades-parts-1-small.JPG|thumb]]
    7 KB (1,195 words) - 08:01, 2 January 2015
  • LaserjetTonerTransfer
    {| border="1" {| border="1"
    4 KB (719 words) - 02:48, 29 December 2014
  • MCodeReference
    {| border="1" ...ntly-selected extruder's stepper power. With an S field for values of 0 to 1, for example M113 S0.7 causes the PWM to be set to the S value. M113 S0 tur
    5 KB (750 words) - 06:37, 11 January 2015
  • MagServo
    === 1. Characteristics === ...al - I did this by eye using a stand magnifier and tweezers - and have pin 1 next to the +5v rail and on the side of the 4-pin connector.
    11 KB (1,962 words) - 06:47, 13 May 2016
  • Magnetic Rotary Encoder v1.0
    ...s is the best encoder of any kind designed for RepRap -- see [[RepRapServo 1 0]] for an overview of various kinds of encoders. ...an [http://downloads.sourceforge.net/reprap/reprap-magnetic-rotary-encoder-1.0.zip?modtime=1211407665&big_mirror=0 download the electronics files from S
    21 KB (3,170 words) - 09:43, 22 May 2017
  • Make IDC Cables
    === Step 1: Insert Cable Into Connector === ...ing gray cable with a red index wire, line that index wire up with the Pin 1 indicator. In this example, that indicator is the manufacturer's mark, 'Be
    3 KB (470 words) - 05:15, 25 July 2015
  • Print It Forward
    {| border="1" |$1,000,000,000
    3 KB (455 words) - 03:59, 10 June 2022
  • Managing your filament
    ...dinary SAE 30 oil, the stuff you use on hinges and the kid's bike or "3-in-1" type products are fine.
    3 KB (441 words) - 11:35, 16 April 2016
  • MaterialsScience
    ...scholar?hl=en&safe=off&q=fabrication+of+ceramic+parts+using+mold+sdm&spell=1 ...ggregate - silica or zircon sand. The process is repeated to build up the 1 to 2cm layer. The ceramic shell is then placed in a furnace to burn out th
    12 KB (1,822 words) - 13:14, 21 February 2013
  • McWireCartesianBot 1 0
    ...f component specifications work: #10-24 x 3/4" screws, 3/4" x 3/4" rails, 1/4" acrylic, etc.
    4 KB (673 words) - 11:46, 28 November 2012
  • McWire Cartesian Bot 1 2 (Death March: Do not build!!!)
    * [http://downloads.sourceforge.net/reprap/reprap-mcwire-cartesian-bot-1.2.1.zip?modtime=1200886076&big_mirror=0 Download the files from SourceForge]. ...the supports pictured are 1/16" thickness. It's highly recommended to use 1/8" thickness from McMaster.com'''
    37 KB (6,065 words) - 05:11, 8 September 2013
  • MeasuringThermistorBeta
    ...\frac{\ln\left ( \frac{R}{R_{0}} \right )}{(\frac{1}{T + 273.15}) - (\frac{1}{T_{0} + 273.15})}</math> <math>R_{Z} = R_{0}\exp \left ( \beta \left ( \frac{1}{273.15} - \frac{1}{T_{0} + 273.15} \right ) \right )</math>
    6 KB (933 words) - 06:20, 30 December 2014
  • MediaMain
    ...ef=&CJURL=&CJID=2617611], one of the top "products" released on 2013 April 1.[http://lifehacker.com/5992871/your-2013-april-fools-day-prank-spoiler] * [http://www.nytimes.com/2011/01/13/technology/personaltech/13basics.html?_r=1&src=busln New York Times article on 3D printing and RepRap]
    23 KB (3,218 words) - 09:08, 12 December 2014
  • Modules
    == Protocol Version 1 == * 1 byte: Response type (0)
    2 KB (318 words) - 06:04, 28 June 2014
  • Motherboard 1 1
    = Motherboard v1.1 = See [http://objects.reprap.org/wiki/Hacks_to_the_RepRap_Motherboard_v1.1 here in the Builder's Wiki] for hacks to this board.
    26 KB (4,326 words) - 20:17, 26 November 2011
  • Motherboard 1.2
    You can [http://downloads.sourceforge.net/reprap/reprap-motherboard-1.2.zip download the release file] from SourceForge that has a bunch of helpf [[File:Motherboard_1.2_schematic.png|200px|||Motherboard 1.2 Schematic]]
    29 KB (4,833 words) - 18:34, 18 November 2014
  • OptoEndstop 2 0
    {{Deprecated|Gen7 Endstop 1.3.1}} You can [http://downloads.sourceforge.net/reprap/reprap-opto-endstop-1.0.1b.zip?modtime=1181187177&big_mirror=0 download the electronics files fro
    6 KB (986 words) - 09:44, 2 October 2012
  • OptoEndstop 2.1
    {{Deprecated|Gen7 Endstop 1.3.1}} {{Languages|OptoEndstop 2.1}}
    16 KB (2,480 words) - 09:52, 14 December 2014
  • Opto Isolator v1.0
    You can [http://downloads.sourceforge.net/reprap/reprap-opto-isolator-1.0.zip?use_mirror=osdn download the electronics files from Sourceforge]. With IDC cables, the <font color="red">red</font> pin generally denotes pin 1. The pins are counted up from that pin until reaching the other side of the
    9 KB (1,366 words) - 04:57, 25 July 2015
  • PC Power Supply
    ...d on the +5&nbsp;V rail cause the PSU to shutdown, some base load (approx. 1&nbsp;A) is required. ...s in the top left. The number proceeds left to right across the top (pins 1 to 10) and then left to right across the bottom (pins 11 to 20).
    15 KB (2,602 words) - 21:34, 24 November 2023
  • PIC16F628
    [[Category:Generation 1 electronics]]
    269 bytes (38 words) - 15:07, 23 July 2015
  • PIC16F648
    [[Category:Generation 1 electronics]]
    1 KB (176 words) - 15:06, 23 July 2015
  • PICCommsLibrary
    [[Category:Generation 1 firmware]]
    117 bytes (14 words) - 15:16, 28 August 2015
  • PIC firmware build
    [[Category:Generation 1 firmware]]
    3 KB (458 words) - 15:16, 28 August 2015
  • PIC programmer
    [[Category:Generation 1 electronics]]
    480 bytes (70 words) - 05:11, 25 July 2015
  • PLA
    * http://forums.reprap.org/read.php?1,120309 . Some recommend unloading PLA from the printer when idle. ...e seen after baking. One coil went from 120.5 grams to 120.0 grams (almost 1/2%).
    15 KB (2,346 words) - 16:50, 3 January 2021
  • PTFE
    {| border = "1" |1,900
    3 KB (474 words) - 16:52, 3 January 2021
  • PWM Driver 1 0
    ...oject/downloading.php?group_id=159590&filename=reprap-freeduino-pwm-driver-1.0.zip download the release file] from SourceForge that has a bunch of helpf {| border="1"
    14 KB (2,230 words) - 20:21, 26 November 2011
  • PWM Driver 1 1
    = PWM Driver v1.1 = # [http://store.makerbot.com/electronics/electronics-kits/pwm-driver-v1-1-kit.html Buy the full kit (components + PCB) from MakerBot Industries]
    15 KB (2,310 words) - 10:17, 15 July 2012
  • Reachout
    There also is a forum http://forums.reprap.org/read.php?1,63448 for discussing this stuff. ...ur town organized for the Software Freedom Day. Purpose of this material: (1) Draw attention to the table with the RepRap Mendel, (2) give some basic in
    2 KB (424 words) - 14:19, 27 February 2014

View (previous 250 | next 250) (20 | 50 | 100 | 250 | 500)

Retrieved from "https://reprap.org/wiki/Special:Search"