Search results
Create the page "RepRap/" on this wiki! See also the search results found.
Page title matches
- {{Languages|RepRap}} ...nt-size: 200%;">Üdvözlet a <span id="projectName" style="color:#005288;">RepRap.org-on</span></h1>4 KB (603 words) - 06:11, 22 January 2017
- {{Languages|RepRap}} ...nt-size: 200%;">Benvenuti su <span id="projectName" style="color:#005288;">RepRap.org</span></h1>14 KB (1,962 words) - 10:28, 10 September 2022
- ...e: 200%;">Bine aţi venit la <span id="projectName" style="color:#005288;">RepRap.org</span></h1> <b><font size="+2">RepRap</font></b> este primul proiect al omenirii cu scopul de a crea o [[wikipedi8 KB (1,167 words) - 17:03, 20 January 2016
- {{Languages|RepRap}} ...: 0.4em; font-weight: bold; font-size: 200%;"><span style="color:#005288;">RepRap.org</span> にようこそ</h1>7 KB (348 words) - 01:12, 4 May 2019
- {{Languages|RepRap}} ...nt-weight: bold; font-size: 200%;">Welcome to <span style="color:#005288;">RepRap.org (한국어) </span></h1>4 KB (165 words) - 20:07, 22 May 2020
- {{Languages|RepRap}} Susipažinkite – '''„RepRap“'''.1 KB (179 words) - 17:04, 20 January 2016
- {{Languages|RepRap}} ...font-size: 200%;">Welkom op <span id="projectName" style="color:#005288;">RepRap.org</span></h1>7 KB (1,008 words) - 17:05, 20 January 2016
- {{Languages|RepRap}} ...weight: bold; font-size: 200%;">Velkommen til <span style="color:#005288;">RepRap.org</span></h1>9 KB (1,338 words) - 17:05, 20 January 2016
- {{Languages|RepRap}} ...font-size: 200%;">Witamy na <span id="projectName" style="color:#005288;">RepRap.org</span></h1>7 KB (996 words) - 17:05, 20 January 2016
- {{Languages|RepRap}} ...nt-size: 200%;">Bem vindo ao <span id="projectName" style="color:#005288;">RepRap.org</span></h1>7 KB (1,119 words) - 23:26, 17 June 2022
- {{Languages|RepRap}} ...: 200%;">Добро пожаловать на <span style="color:#005288;">RepRap.org</span></h1>7 KB (337 words) - 07:16, 2 February 2023
- {{Languages|RepRap}}9 KB (621 words) - 07:18, 2 February 2023
- {{Languages|RepRap}} '''RepRap''' insanlığın ilk genel amaçlı kendini kopyalayabilen üretim makinesi18 KB (2,981 words) - 17:06, 20 January 2016
- {{Languages|RepRap}} ...nt-size: 200%;">欢迎访问 <span id="projectName" style="color:#005288;">RepRap.org</span></h1>4 KB (328 words) - 17:06, 20 January 2016
- {{Languages|RepRap}} ...font-size: 200%;">Welcome to <span id="projectName" style="color:#005288;">RepRap.org</span></h1>4 KB (315 words) - 17:07, 20 January 2016
- {{Languages|RepRap}} ...; font-size: 200%;">ברוכים הבאים ל<span style="color:#005288;">RepRap.org</span></h1>4 KB (315 words) - 17:07, 20 January 2016
- == Principle of RepRap Firmware macros operation == Most [[RepRap Firmware]] board operations are handled by macros files stored on the SD ca24 KB (4,149 words) - 02:51, 9 April 2019
- #REDIRECT [[RepRap Firmware Status responses]]46 bytes (5 words) - 17:23, 9 April 2016
- Сайт Reprap.org далее буду называть проектом RepRap или же просто проектом. ...исходя изменений страницы [[RepRap_Options|Build a RepRap]]4 KB (22 words) - 04:31, 19 April 2016
- RepRap Firmware release notes === [http://forums.reprap.org/read.php?416,683592,684724 DC42 1.14] ===26 KB (4,243 words) - 16:18, 7 July 2016
- [[file:RepRap_Component_Structure.svg|thumb|upright=2.5|RepRap Component Structure.]] File:DSC0382-682x1024.jpg|[[RepRap Morgan]] (''license: [[GPL]]'')|link=[[RepRap Morgan]]7 KB (755 words) - 08:03, 21 May 2018
- As for most [[RepRap Firmware]] documentation on this wiki, some details of this page apply only ...only valid for a reduced range of temperature. This is the method used in RepRap Firmware. Other firmware may use tables instead of this formula, which may17 KB (2,750 words) - 14:25, 27 May 2016
- '''[[RepRap Firmware]] (RRF) FAQ''' ...p://forums.reprap.org/read.php?416,641508 forum thread] and [http://forums.reprap.org/file.php?416,file=75442,filename=7_colour_thingy.JPG result]6 KB (923 words) - 15:51, 30 May 2016
- 3 KB (432 words) - 08:09, 20 June 2016
- The Reprap Pyramid is an offspring of Prusa Mendel i2. It has 20x20x30 cm print volume The [http://reprap.snowcron.com assembly instructions] are among the most detailed in the net,1 KB (196 words) - 03:35, 3 December 2016
- ...-D_Printer_for_Rapid_Prototyping_Paper-Based_Microfluidics Open-source Wax RepRap 3-D Printer] * J. M. Pearce, N. C. Anzalone, and C. L. Heldt. Open-source Wax RepRap 3-D Printer for Rapid Prototyping Paper-Based Microfluidics, ''Journal of L3 KB (383 words) - 10:57, 7 February 2019
- 63 bytes (9 words) - 14:32, 16 January 2017
- This is a placeholder for now. However, RepRap Helios is coming to a wiki near you very soon.174 bytes (29 words) - 05:11, 16 April 2017
- 0 bytes (0 words) - 15:20, 26 May 2017
- {{Languages|RepRap}} ...: 0.4em; font-weight: bold; font-size: 200%;"><span style="color:#005288;">RepRap.org </span> Viki saytına xoş gəlmisiz.</h1>4 KB (627 words) - 10:36, 8 June 2018
- {{Languages|Build A RepRap}} <center style="font-weight:Bold;">RepRap-ını yarat</center>5 KB (722 words) - 10:54, 21 May 2017
- {{Languages|RepRap Machines}} File:Morgan_Pro2.jpg|[[RepRap Morgan]] (''license: [[GPL]]'')4 KB (603 words) - 08:09, 21 May 2018
- {{Languages|Build A RepRap}} <center style="font-weight:Bold;">RepRap-ını yarat</center>5 KB (722 words) - 09:29, 8 July 2017
- '''Egyptian RepRap Project ...Wood Kit 3D Printer will be the 1st to officially publish as the "Egyptian RepRap Project".2 KB (365 words) - 23:56, 2 February 2018
- {{Languages|RepRap Machines}} File:Morgan_Pro2.jpg|[[RepRap Morgan]] (''ライセンス: [[GPL]]'')5 KB (588 words) - 23:51, 28 May 2018
- {{Languages|RepRap Machines}} File:Morgan_Pro2.jpg|[[RepRap Morgan]] (''license: [[GPL]]'')5 KB (650 words) - 13:39, 3 January 2021
- {{MOST-RepRap}} ...onomy: Coupled distributed recycling and manufacturing with recyclebot and RepRap 3-D printing],''Resources, Conservation and Recycling'' 128, (2018), pp. 484 KB (523 words) - 23:43, 16 May 2018
- {{MOST}}{{MOST-RepRap}}6 KB (943 words) - 00:07, 17 May 2018
- {{MOST-RepRap}} ...be used for engineering analysis of parts designed to be created with the RepRap.3 KB (439 words) - 00:10, 17 May 2018
- {{Languages|RepRap help}}5 KB (178 words) - 02:09, 2 July 2018
- * J. M. Pearce, N. C. Anzalone, and C. L. Heldt. Open-source Wax RepRap 3-D Printer for Rapid Prototyping Paper-Based Microfluidics, ''Journal of L * This project derived from: MOST Prusa RepRap [[MOST RepRap parallel build overview|Build it!]]3 KB (393 words) - 20:52, 22 October 2018
- ...in support of the [[Mechanical testing of polymer components made with the RepRap 3-D printer]] project, which resulted in the following publications: = RepRap =33 KB (4,762 words) - 07:01, 3 September 2019
- {{MOST}}{{MOST-RepRap}} ...nd testing of customizable [[open source hardware]] applications for the [[RepRap]] 3D printer. The designs will be categorized here: [[OSAT 3D-Printable De4 KB (448 words) - 12:46, 2 April 2019
- {{MOST}}{{MOST-RepRap}} This page documents the RepRap build for the [[MOST|Michigan Tech Open Sustainability Technology Research7 KB (1,065 words) - 12:07, 15 December 2018
- See Also: [[Development and feasibility of applications for the RepRap 3-D printer]]1 KB (199 words) - 12:09, 15 December 2018
- {{Languages|RepRap Machines}} File:Morgan_Pro2.jpg|[[RepRap Morgan]] (''license: [[GPL]]'')5 KB (624 words) - 11:19, 17 January 2019
- {{Languages|RepRap help}} ...й странице размещены справочные ресурсы RepRap. Итак, это еще не «FAQ», но мы работаем над э5 KB (185 words) - 13:36, 15 January 2019
- {{MOST-RepRap}} The MOST quad-delta RepRap is a deltabot RepRap built off of the [[Athena]] open source 3-D printer model that allows one t1 KB (201 words) - 16:21, 3 February 2019
- {{MOST-RepRap}} ...pers/attachment/file/0005/4988/asee_K-12_2015_finalpaper.pdf Evaluation of RepRap 3D Printer Workshops in K-12 STEM]. ''122nd ASEE 122nd ASEE Conf. Proceedi2 KB (252 words) - 22:17, 27 January 2019
- {{MOST-RepRap}} ...e_server/papers/attachment/file/0004/4989/asee_reprap_paper_final1.pdf The RepRap 3-D Printer Revolution in STEM Education], ''121st ASEE Annual Conference a3 KB (366 words) - 22:20, 27 January 2019
- ...un intento de reunir en un único documento toda la información sobre la RepRap Mendel Prusa, que está disponible en el Internet. Aunque se centra en el modelo Reprap Mendel Prusa, espero que pueda ser de utilidad para los constructores de ot69 KB (11,487 words) - 14:54, 8 July 2019
- {{Languages|RepRap Machines}} Um grande número de modelos RepRap foi criado para diferentes propósitos. Eles geralmente se enquadram em dua5 KB (791 words) - 19:11, 18 October 2019
- {{Languages|RepRap Options}} ...努力去让你有一些关于如何把一些碎片组合起来成为一个RepRap的感觉12 KB (1,071 words) - 05:54, 24 December 2022
- {{Languages|RepRap Options}} ...xplicar, em linhas gerais, como todas as peças se encaixam para criar uma RepRap.36 KB (6,036 words) - 00:27, 18 June 2022
Page text matches
- * [http://dev.forums.reprap.org/file.php?132,file=973,filename=pnpdisk1.stl disk1] * [http://dev.forums.reprap.org/file.php?132,file=975,filename=pnpdisk2.stl disk2]3 KB (521 words) - 01:42, 28 March 2017
- |reprap = Mendel ...ded rods. The problem is that many cheap 3d printers such as the Makerbot, RepRap, etc. are still working on being able to print accurate parts. The lack of2 KB (291 words) - 08:26, 8 September 2013
- #REDIRECT [[G-code#Replies from the RepRap machine to the host computer]]73 bytes (11 words) - 07:34, 29 July 2012
- #REDIRECT [[RepRap Buyers' Guide]]34 bytes (4 words) - 12:13, 14 December 2011
- Welcome to the RepRap wiki administration page. RepRap wiki editors and sysops fight a constant battle for site simplicity, consis * [http://reprap.org/mediawiki/index.php?title=Special:ListUsers&group=sysop "Special:ListUs6 KB (939 words) - 01:06, 27 June 2018
- ...is a different group than the Core Team - for an up-to-the-second list of RepRap wiki sysops, and also some tips on how you can help us build a more excelle ...Such people are you (Hello!), and you are both an engineering creator of RepRap and (through such edits) one of its administrators.10 KB (1,510 words) - 04:12, 14 June 2018
- = Replacement of RepRap Bootup Logo =4 KB (273 words) - 00:00, 3 August 2015
- |reprap = Mendel442 bytes (56 words) - 16:56, 11 February 2010
- |reprap = Huxley * [https://reprap.svn.sourceforge.net/svnroot/reprap/trunk/huxley/ STEP + STL]15 KB (2,299 words) - 05:46, 7 September 2015
- |reprap = Cyrus570 bytes (55 words) - 17:16, 10 April 2013
- |reprap = Darwin |url = [http://blog.reprap.org/2009/06/bowden-extruder-success.html Original Blog Post]496 bytes (62 words) - 09:47, 7 February 2013
- |reprap = Darwin [http://blog.reprap.org/2009/04/bowden-extruder-concept.html]6 KB (907 words) - 21:49, 19 November 2015
- ...this page is to show how the printer can be converted into an open source RepRap machine by stripping everything out of it except for the stepper motors, en ...and firmware configuration and software necessary to run these printers as RepRap machines rather than 3Dsystems machines.7 KB (1,045 words) - 06:20, 2 March 2017
- ...is helps in case of a dataloss or system loss on the computer running your RepRap, or a Microcontroller failure on stand-alone RepRaps.499 bytes (81 words) - 16:38, 24 November 2011
- ...lopment model for the design of physical objects. Lessons learned from the RepRap project"]. discussions of the various materials that can be shaped by a RepRap are currently at [[MaterialsScience]].19 KB (2,841 words) - 18:46, 2 December 2022
- ...link to offsite content. This is bad, because it is impossible for other RepRap User Developers to take what you wrote or designed and make it better on th1 KB (256 words) - 05:10, 26 November 2011
- Several researchers have proposed that some or many of the parts of a RepRap ...process in order to get the first plastic-extruding RepRap. Once we have a RepRap, we don't really need to do it the hard way any more.10 KB (1,537 words) - 10:56, 18 February 2013
- === DIY / RepRap Cardan Joint === Most RepRap delta design uses also printed Cardan joints. Based on this technique the h9 KB (1,441 words) - 19:35, 3 February 2016
- The Combinatorics Problem, relative to the RepRap project, deals with the tremendous amount of variation that happen in the p ...are and machine configuration, that exists on the desktop of a user. The "RepRap Stack" is the software and machine configuration we guarantee will work. A9 KB (1,325 words) - 16:52, 12 June 2021
- The [[Basic Box]] is a common RepRap design element. A [[Darwin]] type RepRap is a Basic Box made from [[RBS/Rod]] and [[RBS/Corner Connectors]]. Likewi1 KB (193 words) - 11:19, 16 October 2013
- [[Image:20px-Exquisite-khelpcenter.png|frameless|right]][http://forums.reprap.org/feed.php?31 Forum/Mailing List]</h2> |feedurl=http://forums.reprap.org/feed.php?31,replies=1,type=rss2 KB (362 words) - 09:16, 8 July 2014
- RepRap [[Map]] link. =RepRap User Group Forum and Mailing List=3 KB (492 words) - 12:53, 25 November 2015
- RepRap [[Map]] link. http://dev.forums.reprap.org/list.php?1742 KB (280 words) - 09:17, 8 July 2014
- ...ugged. These plugin cards will be a selection that best suits the RepStrap/RepRap that you want to create. ...mework that enables a variety of solutions has grown from the way thet the Reprap Project has embraced a range of machine designs and control solutions. Not9 KB (1,409 words) - 15:56, 2 September 2014
- ...ping track of this is not a [[Community]] responsibility, or this is ''Not RepRap''".1 KB (187 words) - 10:23, 30 December 2014
- http://blog.reprap.org/2010/02/broadening-reprap-participation.html * https://github.com/reprap302 bytes (33 words) - 06:25, 28 December 2014
- ...g Berks CoLab] hackerspace in Reading, PA is interested in hosting regular RepRap meetings. The [[RUG/Pennsylvania/State_College | State College RepRap Users Group ]] is a development and learning group based in State College,1 KB (167 words) - 03:15, 7 May 2012
- |reprap = Sui Generis |url = [http://dev.forums.reprap.org/read.php?177,36131 Forum Post]635 bytes (73 words) - 08:17, 30 September 2013
- ...f the [[Library]] is to make RepRap users feel welcome to upload, not only RepRap developers." Q: "But my design has nothing to do with RepRap. Why post it here if it works as well with any other tool?3 KB (558 words) - 05:08, 26 November 2011
- ...therwise government archivists and community archivist won't upload to the RepRap [[Community]].281 bytes (39 words) - 14:24, 6 December 2011
- =Please Note: World Domination may be part of [[official]] RepRap [[Policy]].= How long until everyone on Earth has a RepRap?861 bytes (139 words) - 10:21, 30 December 2014
- ...pt-publication-search.cfm?pub_id=823374 NIST RS274NGC G-code standard], so RepRap firmwares are quite usable for CNC milling and similar applications as well ...odes developed over the years. This particular page is the master page for RepRap. Nowhere in here should the same code be used for two different things; the535 KB (81,593 words) - 20:05, 19 May 2024
- |reprap = Prusa i3 |url = [http://www.reprap.ir www.reprap.ir]3 KB (425 words) - 05:57, 7 January 2017
- |reprap = Mendel1 KB (190 words) - 08:29, 18 October 2013
- |reprap = RepMan ...llenges design challenge] to convert this reliably working toolhead to the RepRap [[Mendel]].<br/>1 KB (172 words) - 13:40, 25 October 2010
- |reprap = Darwin = The Bits From Bytes version of RepRap =2 KB (375 words) - 12:27, 21 September 2015
- |reprap = Sui Generis, Makerbot Frostruder ...escribes the research done by Unfold on extruding ceramic materials with a RepRap. The development platform used is a Bits from Bytes Rapman so all extruder14 KB (2,240 words) - 01:34, 19 April 2014
- |name = Makerbot/RepRap Gen 4 Electronics |reprap = Makerbot4 KB (441 words) - 03:52, 1 January 2012
- Since all the RepRap firmware is written in C or C++, in theory it should be "easy to port"(*) t ...984][http://forums.reprap.org/read.php?4,57039], fullspeceng[http://forums.reprap.org/read.php?1,26026] )11 KB (1,564 words) - 14:24, 15 January 2015
- |reprap = Sui Generis http://builders.reprap.org/2010/02/first-tests-building-powder-based.html14 KB (2,481 words) - 12:08, 28 October 2013
- |reprap = Darwin http://dev.forums.reprap.org/read.php?1,365814 KB (693 words) - 23:55, 19 November 2013
- HDPE, PLA, and the other more common RepRap plastics should be fine, though I'd recommend not sticking your head over a2 KB (337 words) - 18:55, 6 January 2016
- A second Reprap wiki development page at [[Hydra-MMM_Software_and_Firmware]] has been creat6 KB (887 words) - 04:05, 23 September 2013
- |reprap = ? ...ty growth purposes. This will equip a larger pool of people to work on the RepRap Project, enabling more competitors to take part in the Gada Prize competiti7 KB (1,163 words) - 05:16, 28 February 2010
- [[RepRap CAM Toolchains]]54 bytes (6 words) - 17:04, 24 November 2011
- The [[Cyberdyne T-800]] is the next stage in the realization of the Reprap self replication philosophy. Initially it will use the [[Cyberdyne Hydrauli2 KB (281 words) - 13:55, 25 November 2011
- ...ves the [[Cyberdyne T-800]] to be the next stage in the realization of the Reprap self replication philosophy. Initially it will use the [[Cyberdyne Hydrauli2 KB (284 words) - 13:55, 25 November 2011
- RepSnapper is an alternative host software for controlling the RepRap open source 3D printer. * [http://reprap.org/mailman/listinfo/reprap-dev reprap-dev mailing list]2 KB (307 words) - 11:06, 21 August 2013
- ...ns all the CAD files, text, photos, firemware, electronics, etc are on the RepRap wiki. Also, that people are behaving decently regarding citing each others ...[[Full Documentation]] has the negative unintended effect of driving away RepRap user-developer contributions. [[Argument Kills Uploads]].882 bytes (125 words) - 05:08, 26 November 2011
- [[Category:RepRap machines stubs]]4 KB (642 words) - 22:23, 21 December 2015
- ...verwendeten Algorithmus zur Berechnung der Motorbewegungen ab. Da dies bei RepRap-typischen Anwendungen mehrere tausend Impulse pro Sekunde sind, wird sie me11 KB (1,496 words) - 14:20, 1 May 2018
- |reprap = ? ...a has been proposed in the [http://dev.forums.reprap.org/read.php?88,34045 RepRap "Let´s design sth." forum] and is currently picking up speed.5 KB (730 words) - 21:58, 17 October 2013
- |reprap = Sui Generis Alas, as of 2010, the current [[RepRap Options]] are not yet able to make parts with enough strength and precision5 KB (742 words) - 16:21, 2 December 2022
- |reprap = Mendel *http://forums.reprap.org/read.php?94,354638 KB (1,185 words) - 00:33, 5 March 2012
- |reprap = ? http://dev.forums.reprap.org/4 KB (613 words) - 03:03, 26 February 2010
- ...i CNC machine, 3D printer etc. Contraptor uses several developments of the Reprap project - specifically, Stepper Motor Driver boards v1.x and Arduino GCode ...volume working volume built with a Contraptor frame, Dremel toolhead, and RepRap electronics.2 KB (354 words) - 13:14, 18 November 2010
- If user-developers want to contribute to RepRap, and we present them with conflict and complexity, this suddenly seems less ...ful, fix it, and don't complain in front of people trying to contribute to RepRap. '''It's disrespectful to them.''' Imagine staff at science and industry767 bytes (122 words) - 05:06, 26 November 2011
- |reprap = http://dev.forums.reprap.org/read.php?171,370514 KB (695 words) - 18:38, 19 March 2014
- |reprap = ? * http://dev.forums.reprap.org/read.php?1,189,706582 bytes (71 words) - 22:59, 23 February 2010
- |reprap = Post-Mendel |url = [http://dev.forums.reprap.org/read.php?166,37225 forum thread]5 KB (734 words) - 10:13, 3 November 2013
- |reprap = ...request temp readings several times a second. It can also be used to test reprap setup. It works multi platform with WINE install.1 KB (156 words) - 20:31, 8 December 2013
- A reprap wiki development page for the details of the machine has also been created The Reprap project for much of the inspiration for the original machine.11 KB (1,833 words) - 06:52, 18 July 2015
- |reprap = Mendel1 KB (229 words) - 18:53, 18 May 2010
- ...olicy proposal regarding what is considered acceptable content on official RepRap websites. ...to support just about anything [[Interesting]] that people can make with a RepRap, [[CNC Mill]], drill press, or knitting needles, '''files and projects to b1 KB (177 words) - 05:09, 26 November 2011
- |reprap = ? * [http://forums.reprap.org/read.php?1,37016 RepRap forums: "Mechanical Computing Working Group"]3 KB (400 words) - 12:16, 7 March 2013
- ...hings around at much higher speeds without losing steps, compared to early RepRap prototypes which instantly set new speeds without acceleration control.( [h4 KB (602 words) - 15:31, 5 June 2015
- |reprap = Post-Mendel3 KB (474 words) - 00:25, 10 November 2010
- [[Image:Reprap.skp]] http://dev.forums.reprap.org/read.php?1,3735524 KB (3,931 words) - 23:40, 5 February 2024
- ...iption = Adapter to mount one of the excellent [[RepMan]]-toolheads on the RepRap [[Mendel]]. |reprap = Mendel368 bytes (41 words) - 16:04, 26 October 2010
- |reprap = ?509 bytes (75 words) - 01:50, 6 March 2010
- |reprap = Post-Mendel1 KB (151 words) - 00:23, 10 November 2010
- ...ple, and can be made single-sided without any thin tracks. That is is why RepRap itself can make them. We must walk before we can run... ...Eagle design files for this are [http://reprap.svn.sourceforge.net/viewvc/reprap/trunk/electronics/Pololu-electronics/ in the repository here], along with m20 KB (3,299 words) - 23:41, 5 February 2024
- ...uestions]] related to the choice and operation of drive motors used by the Reprap. ...xperimental attempt to replace the stepper motors (and their drivers) in a RepRap with low-cost DC gear motors (and their drivers and a feedback mechanism).12 KB (2,009 words) - 14:45, 12 February 2022
- |reprap = Wolfy2 KB (202 words) - 09:16, 26 March 2015
- |reprap = ? I thought of something that may be civil engineering, emergency housing, and reprap related - or maybe not.1 KB (220 words) - 08:04, 2 January 2015
- ...make ReplicatorG work with the RepRap 5D versions of the firmware (vanilla RepRap and Ultimaker) were undertaken by [[ErikDeBruijn]] and D1pl01d. There's now832 bytes (108 words) - 20:50, 29 August 2015
- |reprap = WolfStrap |cadModel = [[File:Reprap.skp]]24 KB (4,237 words) - 07:02, 3 September 2019
- |name = 3D Printer - Reprap - Repstrap - 3D Mendel - Kiwi_M5_Mendel_Battle_Tank |reprap = Mendel35 KB (5,908 words) - 00:54, 21 April 2013
- |description = A tripod RepRap with ''(what is its special feature?)'' |reprap =1 KB (196 words) - 07:10, 8 September 2013
- *'''Want to self-replicate? We can help - RepRap.org''' *'''Please self-replicate responsibly - RepRap.org'''535 bytes (76 words) - 14:19, 27 February 2014
- {{Merge|RepRap help}} {{Languages|RepRap project FAQ}}22 KB (3,459 words) - 11:28, 22 May 2017
- ...font-size: 200%;">Welcome to <span id="projectName" style="color:#005288;">RepRap.org</span></h1> ...objects. Since a large part of the RepRap is made of this same plastic the RepRap can be considered a [[wikipedia:Self-replicating machine|self-replicating m4 KB (556 words) - 12:57, 14 July 2014
- |reprap = http://dev.forums.reprap.org/read.php?180,18770,18770#msg-18770709 bytes (77 words) - 19:25, 11 November 2023
- ...e attempts to provide information relevant to a Life Cycle Assement of the RepRap. Due to limitations of manpower and materials, the assesment is based on ex [[Category:RepRap machines]]8 KB (1,258 words) - 04:30, 29 October 2012
- |reprap = A polar RepRap is one that moves its toolhead by turning in a circle.8 KB (1,430 words) - 12:26, 21 September 2015
- |reprap = I've also gone through the motions and built a RepRap Mendal Prusa.7 KB (1,126 words) - 01:57, 25 November 2014
- |reprap = Mendel4 KB (757 words) - 10:45, 27 October 2010
- {{RepRapRu|name=RepRap II "Мендель"|version=II|image=mendel.jpg|description= Машина справа - это "принтер" RepRap II "Мендель", названная в честь [http://ru.wikipedia.6 KB (147 words) - 05:16, 2 October 2014
- RepRap [[Map]] link. http://dev.forums.reprap.org/index.php?192 KB (290 words) - 09:13, 4 June 2022
- RepRap [[Map]] link. http://dev.forums.reprap.org/index.php?192 KB (301 words) - 09:17, 8 July 2014
- {{RepRapNavigationRu|name=RepRap II "Мендель"}} Документация по созданию RepRap II "Мендель" доступна каждому (открыта и пр8 KB (301 words) - 00:41, 22 November 2017
- {{RepRapNavigationRu|name=RepRap II "Мендель"}} ...необходимы, чтобы создать вторую версию RepRap "Мендель":1 KB (25 words) - 08:59, 27 December 2011
- {{RepRapNavigationRu|name=RepRap II "Мендель"}} * [[Builders/Config/Getting Started|Powering up the RepRap]]1 KB (170 words) - 12:57, 16 March 2010
- {{RepRapNavigationRu|name=RepRap II "Мендель"}} ...борка/Настройка/С чего начать|Включение RepRap]]2 KB (46 words) - 16:03, 24 November 2011
- ПО RepRap совместимо с 32-битными версиями Linux и Microso ...шивку микроконтроллера для Вашей машины RepRap. Она доступна здесь:12 KB (439 words) - 13:46, 9 February 2011
- ...ает стандартные электронные компоненты RepRap. Вы можете так же использовать [[Pololu_Electron ...Материнская_плата_RepRap|Материнская плата RepRap]] (''mendel/electronics/motherboard'', [http://store.makerbot.com/electroni4 KB (135 words) - 04:43, 26 November 2011
- |RepRap имеет основной контроллер, который управ15 KB (366 words) - 10:06, 5 July 2013
- ...ем вам как построить механическую часть RepRap Версии II "Мендель". Чтобы получить беглое2 KB (71 words) - 01:49, 24 January 2013
- This page describes how to wire up RepRap Version II "Mendel". Before you wire the machine up, [[Testing_RepRap_Elec .../viewvc/reprap/trunk/mendel/electronics/mendel-wiring-diagram.sch?view=log RepRap subversion repository here]], but that may be an unstable version in develo7 KB (1,085 words) - 23:53, 5 February 2024
- ...edgementsMain-IPCoast-logo.jpg|thumb]] and [http://www.budgetdedicated.com/RepRap BudgetDedicated (our other host)] [[image:BD_logo_sponsor.jpg|BudgetDedicated sponsors RepRap with 2 VPS', storage, bandwidth, DNS services, etc.|thumb]]2 KB (265 words) - 09:07, 12 December 2014
- |reprap = == RepRap Research/Writeups==8 KB (979 words) - 17:27, 25 December 2019
- =RepRap Designs for Download = * [http://reprap.org/Downloads/extruder/extruder.html Version 1 of a Polymorph Extrusion Hea4 KB (634 words) - 15:44, 7 October 2012
- ...rg/part/module/Arduino+Breakout+v1.1 Buy the components with ease w/ parts.reprap.org] You can [http://downloads.sourceforge.net/reprap/reprap-arduino-breakout-1.1.zip?modtime=1206561051&big_mirror=0 download the elect4 KB (642 words) - 04:59, 25 July 2015
- ...rg/part/module/Arduino+Breakout+v1.2 Buy the components with ease w/ parts.reprap.org] You can [http://downloads.sourceforge.net/reprap/reprap-arduino-breakout-1.2.zip?modtime=1206561051&big_mirror=0 download the elect5 KB (766 words) - 04:59, 25 July 2015
- ...rg/part/module/Arduino+Breakout+v1.2 Buy the components with ease w/ parts.reprap.org] You can [http://downloads.sourceforge.net/reprap/reprap-arduino-breakout-1.2.zip?modtime=1206561051&big_mirror=0 download the elect5 KB (772 words) - 05:00, 25 July 2015
- ...rg/part/module/Arduino+Breakout+v1.4 Buy the components with ease w/ parts.reprap.org] You can [http://superb-east.dl.sourceforge.net/sourceforge/reprap/reprap-arduino-breakout-1.4.zip download the electronics files from Sourceforge].7 KB (1,003 words) - 12:13, 7 March 2013
- ...://sourceforge.net/project/showfiles.php?group_id=159590&package_id=256565 RepRap Arduino firmware package]. Make sure you get the latest version. # Copy the folders in '''reprap-arduino-firmware-x.y/library''' to '''arduino-00xx/hardware/libraries'''6 KB (939 words) - 06:33, 11 January 2015
- ...her, it'd be great to have your feedback to strengthen the design and make RepRap the best it can be...'' ...Apologies, this will be awkward (if the family aren't already involved in RepRap, they might be now). You have to lift up the top XY frame and slot it onto50 KB (8,709 words) - 12:15, 28 January 2013
- This is a copy of the first appearance of the idea for RepRap on the [http://bath.ac.uk Bath University] website on 2 February 2004.11 KB (1,864 words) - 07:42, 7 March 2016
- ...e - we haven't tried this yet; it should work fine, but watch [http://blog.reprap.org/ the blog] for details). In addition, there's a [sourceforge.net/p/reprap/code/HEAD/tree/trunk/darwin/mechanics/bits-from-bytes-designs/DXFs-for-lase1 KB (159 words) - 09:43, 16 October 2015
- * Mk2a RepRap Polymer Extruder Head: <br /> * Second NZ RepRap under construction showing wiring.: <br />1 KB (147 words) - 06:20, 27 November 2011
- ...four such modules (three if the extruder is controlled by a DC motor) in a RepRap or RepStrap. See RepStrap for an overview of all the components. (For a b A [http://reprap.svn.sourceforge.net/viewvc/reprap/trunk/reprap/firmware/devices/stepmotor/ snapshot of the latest source] is available for7 KB (1,090 words) - 06:34, 29 November 2014
- OK, takže jste dostavěli váš RepRap - ze stavebnice a nebo od nuly. Ale před tím, než se pustíte do tvorby ...ry - na linuxu jsou tato nastavení uložena v textovém souboru ~/.reprap/reprap.properties).3 KB (564 words) - 16:22, 1 March 2014
- [[Category:Reprap host software]]107 bytes (14 words) - 05:11, 19 July 2015
- ...ttp://reprap.svn.sourceforge.net/viewvc/reprap/trunk/software/host/src/org/reprap/geometry/polygons/BooleanGridList.java?revision=4144&view=markup BooleanGri ...into toolpaths for home-build thermoplastic-extrusion 3D printers like the RepRap or MakerBot. (in Alpha)" [https://github.com/revarbat/Mandoline/wiki]4 KB (588 words) - 05:11, 19 July 2015
- ...oking to order your bits click [http://parts.reprap.org here] to go to the RepRap Parts Lister. It will save you a huge amount of time and frustration by lis The STL files for all the RP parts for RepRap Version 1.0 "Darwin" are available for download from [http://sourceforge.ne3 KB (518 words) - 06:23, 27 November 2011
- = HOWTO: Converting A RepStrap To A Full-blown RepRap = * If you don't have a RepRap or a RepStrap, see [[What Tooling Do You Have]] to figure out how to get fr1 KB (240 words) - 14:32, 6 December 2011
- ...ttp://reprap.svn.sourceforge.net/viewvc/reprap/trunk/software/host/doc/org/reprap/geometry/polygons/AllSTLsToBuild.html ...ttp://reprap.svn.sourceforge.net/viewvc/reprap/trunk/software/host/src/org/reprap/geometry/polygons/AllSTLsToBuild.java?view=log817 bytes (114 words) - 05:11, 19 July 2015
- ...pre-cut holes to mount all the electronics nicely. However, if you have a RepRap it should be pretty simple to wire it up in a similar way. * Page added by AB to distinguish CupCake wiring from RepRap wiring.2 KB (361 words) - 05:17, 25 July 2015
- These are temporary instructions for building the reprap firmware under cygwgin. ** <tt>mkdir /usr/src/reprap</tt>2 KB (267 words) - 19:54, 26 November 2011
- At the RepRap project we have a never-ending discussion about the relative merits of step To start with, RepRap will most likely use steppers, as we don't need a lot of torque (additive m6 KB (1,035 words) - 06:45, 13 May 2016
- ...n [http://sourceforge.net/project/downloading.php?group_id=159590&filename=reprap-dc-motor-driver-1.0-r1.zip download the release file] from SourceForge that ...urer. The image shows the professionally manufactured PCB once sold by the RepRap Research Foundation.16 KB (2,496 words) - 10:31, 8 June 2013
- You can [http://downloads.sourceforge.net/reprap/reprap-dc-motor-driver-1.1.zip?use_mirror=osdn download the release file] from Sou ...urer. The image shows the professionally manufactured PCB once sold by the RepRap Research Foundation.17 KB (2,658 words) - 13:05, 24 June 2014
- The parts of the RepRap Thermoplast Extruder Version 1.1. ...ourceforge.net/viewvc/reprap/trunk/reprap/mechanics/polymer-extruder/AoIs/ RepRap Subversion Repository here.] AoI can export these as STL files for rapid p2 KB (272 words) - 00:18, 12 September 2013
- ....sourceforge.net/viewvc/reprap/trunk/reprap/electronics/Universal-pcb/ svn/reprap/electronics/Universal-pcb] ...measure the temperature of the extrude head. The standard thermistor that RepRap uses is a miniature glass-bead type, which is available from [[RS|RS]], par12 KB (1,936 words) - 00:20, 12 September 2013
- ...measure the temperature of the extruder head. The standard thermistor that RepRap uses is a miniature glass-bead type, which is available from [[RS|RS]], par When you know C3 run the RepRap Java control software and select <tt>Preferences</tt> from the <tt>File</tt14 KB (2,352 words) - 17:21, 29 October 2015
- = RepRap v1.0 "Darwin" Master Bill of Materials (BOM) =458 bytes (69 words) - 09:39, 26 November 2011
- You will need '''3* (three) of these for a basic RepRap machine, and *6''' (six) of them for a full machine with both home and end You can [http://downloads.sourceforge.net/reprap/reprap-opto-endstop-1.0.1b.zip?modtime=1181187177&big_mirror=0 download the electr7 KB (1,036 words) - 15:24, 23 July 2015
- ...the chip (G) and its associated capacitors. The data from (G) to and from RepRap's communications ring is sent and received by the connectors at (E). (F) i ...et/viewvc/reprap/trunk/reprap/electronics/Comms_and_power_distribution svn/reprap/electronics/Comms_and_power_distribution]16 KB (2,457 words) - 09:39, 26 November 2011
- ...the chip (G) and its associated capacitors. The data from (G) to and from RepRap's communications ring is sent and received by the connectors at (E). (F) i ...et/viewvc/reprap/trunk/reprap/electronics/Comms_and_power_distribution svn/reprap/electronics/Comms_and_power_distribution]13 KB (2,131 words) - 09:40, 26 November 2011
- ...the chip (G) and its associated capacitors. The data from (G) to and from RepRap's communications ring is sent and received by the connectors at (E). (F) i ...tp://parts.rrrf.org/product_info.php?products_id=28 buy this PCB] from the RepRap Research Foundation, or you can make your own. The image above shows the pr15 KB (2,450 words) - 04:46, 25 July 2015
- Here is a listing of various printed parts used in the creation of a RepRap machine, and equivalents that you can either find, buy, or construct yourse840 bytes (148 words) - 09:40, 26 November 2011
- ....sourceforge.net/viewvc/reprap/trunk/reprap/electronics/Universal-pcb/ svn/reprap/electronics/Universal-pcb] For details of the stepper motors RepRap uses [[StepperMotor|follow this link]].3 KB (430 words) - 20:08, 26 November 2011
- One of these boards controls each stepper motor in the RepRap. You'll need three of these to build the Darwin design. For details of the stepper motors RepRap uses and instructions on wiring them up, [[StepperMotor|follow this link]].6 KB (890 words) - 04:51, 25 July 2015
- ...tive design for the [[Opto Endstop v1.0|opto end stop]] used on the Darwin RepRap. ...e board and ZD1901 you will need a header to match your connectors for the RepRap wiring harness, a 220 ohm resistor and three bits of wire:2 KB (334 words) - 09:47, 14 December 2014
- = RepRap 1.0 "Darwin" Z Stage Construction = ...making the Z (vertical) axis for the first release of the RepRap machine: RepRap 1.0 "Darwin". However since Darwin is not yet complete, neither are these1 KB (223 words) - 09:41, 26 November 2011
- ...gns typically assume you already have a RepRap available to build the next RepRap. (This is a bit of a chicken-and-egg problem). ...bootstrap pathway towards building a RepRap when you don't already have a RepRap. Such bootstrap pathways typically involve building an intermediate RepStra12 KB (1,622 words) - 05:39, 4 September 2015
- ...cumentation] or can [http://reprap.svn.sourceforge.net/viewvc/reprap/trunk/reprap/ be browsed raw]. ...ows binary version is also available from [http://sourceforge.net/projects/reprap/ SourceForge].2 KB (254 words) - 19:14, 26 November 2011
- '''NOTE:''' RepRap host is not the latest software, for the most popular software see [[Printr ...oad parts to be printed and that generates files from them to be sent to a RepRap machine.47 KB (8,094 words) - 23:56, 5 February 2024
- ...ailable "chemicals" and voltages, so it's well suited for the not so rigid RepRap machines. [[Image:20px-Exquisite-khelpcenter.png|frameless|right]][http://forums.reprap.org/feed.php?35,83032 Forum/Mailing List]</h2>18 KB (2,902 words) - 10:27, 4 November 2013
- Many things in the RepRap project are electronics based. If you are joining the project in the early ...an get leaded solder and do not plan on ingesting it, use it. All the core RepRap development team were raised on leaded solder, and look how well they turne11 KB (1,935 words) - 02:45, 29 December 2014
- ...the process for making releases of the various electronics modules for the RepRap project. These releases include GERBER files, PDF of the circuits, and sou Which would create a file called reprap-universal-controller-1.3.0.zip that contains GERBER, PDF, and KiCad source1 KB (210 words) - 02:45, 29 December 2014
- ...from a 3D object in STL file format to into movement instructions for your RepRap in standard G-Code file format. The RepRap code in org.reprap.geometry.polygons.STLSlice solves this by recursively dividing the line end7 KB (1,250 words) - 05:11, 19 July 2015
- printers, like RepRap. Conventional manufacturing produces goods in an arithmetic7 KB (1,134 words) - 05:07, 26 November 2011
- ...Extruder Exerciser, which is launched from the Diagnostic menu in the main RepRap host application.20 KB (3,214 words) - 02:37, 4 March 2014
- ...alternative in the [http://reprap.svn.sourceforge.net/viewvc/reprap/trunk/reprap/mechanics/polymer-extruder/AoIs/gear-bush-holder.aoi gear-bush-holder.aoi f ...port-2. As their names imply, they need no support material to build in a RepRap machine, and so should make things much simpler.19 KB (3,267 words) - 16:49, 28 November 2011
- ...in the repository [https://reprap.svn.sourceforge.net/svnroot/reprap/trunk/reprap/mechanics/polymer-extruder here]. These were created using [http://www.qca The standard polymer filament that RepRap uses is 3mm in diameter. This is a common size for plastic welding rod, fo17 KB (3,073 words) - 16:50, 28 November 2011
- ...part/module/Extruder+Controller+v2.0 Buy the components with ease at parts.reprap.org] You can [http://downloads.sourceforge.net/reprap/reprap-extruder-controller-2.0.zip download the release file] from SourceForge tha18 KB (2,967 words) - 20:19, 26 November 2011
- * It is plug and play with the [[Motherboard_1_1|RepRap Motherboard]]. ...part/module/Extruder+Controller+v2.1 Buy the components with ease at parts.reprap.org]31 KB (5,027 words) - 20:19, 26 November 2011
- ...ary encoder. Its an all-in-one solution for controlling an extruder. The RepRap configuration is shown at the top, the MakerBot one underneath. * It is plug and play with the [[Motherboard_1_1|RepRap Motherboard]].35 KB (5,524 words) - 18:33, 18 November 2014
- ...hat only apply to Darwin and so are no longer relevant to Mendel and later RepRap designs. If this is your first time here, you probably want the current [[G * [[#HansWargers|Hans Warger's Reprap Design]]26 KB (4,452 words) - 14:31, 29 February 2012
- |reprap = Megatronics 2.0 |cadModel = [http://reprap.org/wiki/File:LCD_control_2004_for_Megatronics_2.0.jpg]879 bytes (115 words) - 07:06, 10 January 2015
- ...t for our purposes, we'll be focusing on building a printer which uses the RepRap control system, but is compatible with Fab@Home toolheads and- get this- so1 KB (227 words) - 16:51, 28 November 2011
- == RepRap Firmware Build Process == * The firmware code is located in reprap/firmware4 KB (586 words) - 11:46, 4 May 2012
- The current version of RepRap is [[RepRapTwoMendel|RepRap 2.0 "Mendel"]]. We hope to be able to incorporate more advanced features t A fundamental principle of the RepRap project is that anyone who has a RepRap machine will always be able to use it to build the next generation improvem4 KB (671 words) - 08:29, 10 March 2014
- ...in granules - it's the standard form. Getting 3mm filament (which is what RepRap currently uses) is not difficult - many companies will do it - but it does ...ty of materials. It would theoretically be very simple to mount it on the RepRap robot frame and then have at it. Currently both projects are blissfully wo11 KB (1,769 words) - 23:25, 12 December 2014
- ..., brushed DC motors. It was designed to fit on the GM3 gearmotor that the RepRap project uses as its extruder motor of choice. This noise suppression helps ...art/module/GM3+Noise+Suppressor+v1.0 Buy the components with ease w/ parts.reprap.org]7 KB (1,094 words) - 04:58, 25 July 2015
- ...ch to studding, which goes up and down when turned in a captive nut on the RepRap carriage. The smaller gear is slipped on to the shaft of a stepper motor an AoI Rendering of a finished set of gears to raise and lower the RepRap turntable12 KB (2,042 words) - 21:54, 26 October 2015
- Once you start putting electricity into your RepRap - even at just 12 volts - you have to take basic, common sense precautions ...to do this is to [[PCPowerSupply|convert a normal PC power supply]] into a RepRap power supply.4 KB (659 words) - 15:27, 23 July 2015
- == Building the RepRap PIC firmware under Linux == == Programming RepRap PIC chips ==868 bytes (109 words) - 15:18, 28 August 2015
- Once you start putting electricity into your RepRap - even at just 12 volts - you have to take basic, common sense precautions ...to do this is to [[PCPowerSupply|convert a normal PC power supply]] into a RepRap power supply. Its simple, cheap, and all the boards are designed to accept14 KB (2,223 words) - 09:27, 26 November 2011
- = RepRap 2nd Generation Firmware = ...uino - with the SNAP protocol that we used for the original PIC-controlled RepRap. New users should go for G Codes.16 KB (2,592 words) - 06:53, 18 July 2015
- Once you start putting electricity into your RepRap - even at just 12 volts - you have to take basic, common sense precautions * 1 [[Motherboard_1_2|RepRap Motherboard]] (''mendel/electronics/motherboard''),10 KB (1,606 words) - 20:53, 19 February 2012
- = RepRap Generation 3 Firmware = '''Host Device''' - This is your computer that controls the RepRap and issues commands and queries. As of this writing, the only software tha5 KB (745 words) - 06:53, 18 July 2015
- This is a list of common terms and abbreviations used in the RepRap community. The moving middle assembly on the x-axis of a RepRap which holds the extruder. Often referred to as: ''x-carriage''.17 KB (2,735 words) - 22:34, 1 May 2024
- |reprap = Pololu Electronics4 KB (586 words) - 05:56, 29 November 2014
- The [[RepRapOneDarwinThermoplastExtruder|standard RepRap polymer extruder]] works very reliably, is simple, and can be made almost a ...e the [http://blog.reprap.org/2006/02/initial-experiments-on-filament.html RepRap blog for Friday, February 17, 2006] and the subsequent fortnight).6 KB (986 words) - 09:46, 19 September 2013
- The GM3 gearmotor is the standard motor for the RepRap extruder. There are a couple things you can do to make it function better.7 KB (1,097 words) - 18:36, 8 May 2014
- The RepRap itself can run off any RS232 serial port, but the [[StripboardJDM|JDM PIC P ...ith a donation, so we can do more of the research necessary to develop the RepRap:6 KB (1,035 words) - 12:59, 7 July 2014
- ...se. At this point in time a you can make some really useful things with a reprap machine.857 bytes (142 words) - 18:38, 25 October 2010
- ...of SMD parts have fairly big pads, especially the SMD part that we use for RepRap. Resistors, capacitors, LEDs, 7805s, etc. have large pads. Simply apply s # Use your other hand to steady it. It really works well. To use some RepRap terminology: Use your main hand as the XY positioning, and use your second14 KB (2,503 words) - 06:59, 3 September 2019
- The PIC microcontrollers used in the RepRap project express timer and speed values as a number from 0 to 255.3 KB (525 words) - 06:36, 11 January 2015
- ...program used to program serial-programmable ICs, including the PIC used in RepRap. See http://www.ic-prog.com Also (thanks to bartlee45 on the RepRap forums) you need to go to Settings->Options then select Misc tab and check1 KB (180 words) - 17:14, 28 November 2011
- ...ists keen to exploit the simple and inexpensive technologies developed for RepRap in other projects - please do! Currently there is no specific board, but is ...sion|Subversion]] at [http://reprap.org/svn/reprap/firmware/devices/iobox/ reprap/firmware/iobox]1 KB (187 words) - 17:17, 28 November 2011
- ...uit_serial_programming In-circuit serial programming]'''; '''ICSP'''): The RepRap controller boards have been designed to allow you to program the PIC chips ...a three-pin and a two-pin socket. The three-pin socket will plug into the RepRap Universal Controller board where the Max/Empty opto-switch normally goes.3 KB (495 words) - 15:28, 23 July 2015
- '''RepRap is short for Replicating Rapid-Prototyper.'''1 KB (171 words) - 13:48, 12 May 2015
- This page shows some samples made by prototype and production RepRap machines. ...at were sold to someone else. Cost: One case of beer... The person who's RepRap made them is Wade Bortz.7 KB (1,195 words) - 08:01, 2 January 2015
- ...nd currently needs this library installed in order to communicate with the RepRap modules. ...on Windows is very straightforward. Just copy the JavaComm files to your reprap/host/lib directory:4 KB (743 words) - 19:56, 26 November 2011
- [[Subversion|Subversion]] Location: /reprap/host471 bytes (70 words) - 19:56, 26 November 2011
- RepRap is using KiCad for electronic design. The KiCad homepage is http://www.kic ...Those should be on a metric grid to interface more easily with the rest of RepRap. Kicad flips between imperial and metric with a single button click; you m6 KB (1,078 words) - 12:08, 26 October 2021
- ...ng dairy products, fermenting them with bacteria to produce youghurt. Keen RepRap researchers may wish to experiment with yoghurt production. ...distilled, and converted back into free acid once more. It is not known if RepRap-grade [[PLA]] will need further purification.2 KB (237 words) - 14:47, 2 July 2015
- = The RepRap Live CD = ...of thanks to Reece Arnott) that will boot up in a PC and allow you to run RepRap without installing it.2 KB (263 words) - 18:56, 28 April 2012
- =RepRap Custom M Code Reference = http://reprap.org/wiki/Mendel_User_Manual:_RepRapGCodes5 KB (750 words) - 06:37, 11 January 2015
- ....uk/ 2001 Electronic Components Ltd] as they have been very helpful to the RepRap project.11 KB (1,962 words) - 06:47, 13 May 2016
- If your RepRap only uses stepper motors, like most of the top-rated RepRaps in the [[Compa As of 2014, this is the most recent magnetic rotary encoder designed for RepRap.21 KB (3,170 words) - 09:43, 22 May 2017
- * (highly experimental) Use a RepRap to put some etch-resistant coating on the copper-clad PCB [[Automated Circu ...sfer method. If you only plan to do a few boards (and fab the rest on your RepRap) this is probably the one to use.9 KB (1,536 words) - 02:49, 29 December 2014
- ...piezas de Mendel reprapeadas, o quieres construir alguna otra variante de RepRap, sáltate esta página y vete a la página de [[PartsSupplies|Suministrador VXB.com RepRap kit (contiene todos los rodamientos que necesitarás para una Mendel)10 KB (1,639 words) - 00:02, 24 August 2012
- ...s so that Rep Rappers far and wide can get to developing the future of the reprap project. ...ance of participation in the Print It Forward program.(Do not set yourself/reprap community up for failure by ignoring this warning)3 KB (455 words) - 03:59, 10 June 2022
- ...reak the filament, or send it in clinging spirals into the innards of your RepRap - even worse, onto the bench! ...d [[ABS]] are apparently the most popular feed stock for people who have a RepRap, although researchers are testing other [[:Category:Thermoplastic]] materia3 KB (441 words) - 11:35, 16 April 2016
- * http://reprap.soup.io - Our day-to-day reprap blog326 bytes (53 words) - 19:18, 26 November 2011
- http://reprap.blogspot.com/2006/03/potential-support-material.html http://reprap.blogspot.com/2006/05/support-material-conclusions.html12 KB (1,822 words) - 13:14, 21 February 2013
- ...asy to work with cartesian robot that is suitable for integration with the RepRap project. On these pages, we will be documenting and elaborating on his ini ...-cartesian-bot/ trunk/users/hoeken/mcwire-cartesian-bot/] directory of the RepRap subversion repository.'''4 KB (673 words) - 11:46, 28 November 2012
- <sebastienb> http://reprap.org/wiki/McWire_Cartesian_Bot_1_2 <sebastienb> http://reprap.org/wiki/McWire_Cartesian_Bot_1_2_(Death_March: Do not build!!!)37 KB (6,065 words) - 05:11, 8 September 2013
- ...odel ([http://en.wikipedia.org/wiki/Steinhart-Hart_equation]), however for RepRap the simple beta model is sufficient. == Conversion for RepRap ==6 KB (933 words) - 06:20, 30 December 2014
- ...e.com/trends google trends] copy paste this (between ><) into text field: >RepRap<. **http://news.google.com/news?q=RepRap23 KB (3,218 words) - 09:08, 12 December 2014
- Mendel is the version 2 RepRap. Some ideas have been kicked around the core team and Ed has done some desi * 3D part files are [https://reprap.svn.sourceforge.net/svnroot/reprap/trunk/mendel/mechanics/cartesian-robot/ here].2 KB (300 words) - 19:17, 26 November 2011
- A RepRap can be converted to a light duty [[CNC Mill]] by equipping it with a rotary ...ven metals. The design is compact/light and probably could be fitted to a RepRap without too much difficulty. See [http://makeyourbot.org/low-cost-spindle-11 KB (1,816 words) - 04:15, 9 March 2015
- ...description for an older attempt to communicate between various electronic RepRap components. While there is currently no known device using this, it might b ...twork to determine what types of devices are connected. For example: the RepRap host software queries all devices for their type, compiles a list of connec2 KB (318 words) - 06:04, 28 June 2014
- ...nectors to hook up all the various peripherals that you'll need to drive a RepRap machine. It has headers for three stepper drivers, as well as 4 RJ45 conne See [http://objects.reprap.org/wiki/Hacks_to_the_RepRap_Motherboard_v1.1 here in the Builder's Wiki] f26 KB (4,326 words) - 20:17, 26 November 2011
- The top picture shows the board configured for RepRap. The second picture shows it configured for use in a [[Cupcake]]. The f ...nectors to hook up all the various peripherals that you'll need to drive a RepRap machine. It has headers for three stepper drivers, as well as 4 RJ45 conne29 KB (4,833 words) - 18:34, 18 November 2014
- = [http://www.fabathome.org/ Fab@Home] and RepRap Multiple Material File Format = == RepRap/[http://www.fabathome.org/ Fab@Home] Object Format v0.1 ==1 KB (203 words) - 15:48, 4 January 2015
- To set NetBeans up for RepRap, follow [[SettingUpNetBeans|this link]].382 bytes (57 words) - 11:27, 28 November 2012
- = Old To New RepRap Java Host Software Upgrade = Originally the RepRap Java host software required you to install the Java3D and RXTX libraries by1 KB (216 words) - 12:07, 21 July 2015
- You will need '''3* (three) of these for a basic RepRap machine, and *6''' (six) of them for a full machine with both home and end ...ap.org/part/module/Opto+Endstop+v1.0 Buy the components with ease w/ parts.reprap.org]6 KB (986 words) - 09:44, 2 October 2012
- ...ach build each axis needs to back up until the datum point is reached. For RepRap, we use one opto-switch for each axis to define its position. The opto swit You will need '''3* (three) of these for a basic RepRap machine, and *6''' (six) of them for a full machine with both home and end16 KB (2,480 words) - 09:52, 14 December 2014
- ...oise problems, or to connect circuits that have different voltages. In the RepRap system, they allow us to isolate the noisy motor driving circuits from the You can [http://downloads.sourceforge.net/reprap/reprap-opto-isolator-1.0.zip?use_mirror=osdn download the electronics files from S9 KB (1,366 words) - 04:57, 25 July 2015
- ...for commodity PCs, typically ATX PSUs, are pretty convenient for supplying RepRap printers and their controllers. They're affordable, made for supplying elec ...u can plug connectors already fitted to the PSU's cables directly into the RepRap board, no modification or opening of the unit required.15 KB (2,602 words) - 21:34, 24 November 2023
- We used to use this in the RepRap boards, but we now use the [[PIC16F648|PIC16F648]].269 bytes (38 words) - 15:07, 23 July 2015
- Create a directory for tools needed for RepRap firmware build and put gputils in it: $ mkdir $HOME/reprap-tools3 KB (458 words) - 15:16, 28 August 2015
- ...ripboardJDM|JDM Programmer]]. Eventually this will be integrated with the RepRap circuitry itself. If you'd like to help in development, please contact us.480 bytes (70 words) - 05:11, 25 July 2015
- PLA is the ideal material for a Mendel RepRap. It is dimensionally stable, so there is no need for a heated bed. It is re * http://forums.reprap.org/read.php?1,120309 . Some recommend unloading PLA from the printer when15 KB (2,346 words) - 16:50, 3 January 2021
- It's fairly hard and fairly stiff too, so it's ideal for RepRap parts including things low friction bushings to main assembly parts. Thermo ...eing the best all-round low friction and inert [[Lubrication|lubricant for RepRap machines]]. PTFE is also sold in very thin tape, known as plumbers tape or3 KB (474 words) - 16:52, 3 January 2021
- # [http://parts.reprap.org/part/module/PWM+Driver+v1.0 Buy the components from the list below] ...[https://sourceforge.net/project/downloading.php?group_id=159590&filename=reprap-freeduino-pwm-driver-1.0.zip download the release file] from SourceForge th14 KB (2,230 words) - 20:21, 26 November 2011
- # [http://parts.reprap.org/part/module/PWM+Driver+v1.1 Buy the components from the list below] You can [http://downloads.sourceforge.net/reprap/reprap-pwm-driver-1.1.zip?use_mirror=osdn download the release file] from SourceFo15 KB (2,310 words) - 10:17, 15 July 2012
- #REDIRECT [[RepRap Buyers' Guide]]34 bytes (4 words) - 08:20, 18 August 2013
- |reprap = Mendel Using the Belt Spliter [http://objects.reprap.org/wiki/Belt_splitter_jig Belt splitter jig]8 KB (1,353 words) - 09:40, 18 September 2015
- There also is a forum http://forums.reprap.org/read.php?1,63448 for discussing this stuff. ...to say certain things all over again. German. http://reprap.org/wiki/File:RepRap-Ausstellungstexte.pdf2 KB (424 words) - 14:19, 27 February 2014
- ...ill cause a new window to be opened in which each segment laid down by the RepRap machine is represented as a line, so you can see the build happening on the ...the user. Setting this true causes the code to send G-codes direct to the RepRap machine (as opposed to writing them to a file) from communications port Por11 KB (1,614 words) - 15:28, 26 November 2011
- This is a reprint of Adrian Bowyer's Keynote Address on the RepRap project given to the Seventh National Conference on Rapid Design, Prototypi ...described. Some predictions are also given on the possible impact of the RepRap machine on the human economy in the event of the project's success.29 KB (4,754 words) - 20:35, 26 September 2012
- The example we will use is the Universal PCB that is used for both the RepRap motor controllers and the extruders. It is in the KiCad directory ...onics/Universal-pcb/ http://reprap.svn.sourceforge.net/viewvc/reprap/trunk/reprap/electronics/Universal-pcb/]8 KB (1,420 words) - 02:52, 29 December 2014
- A RepRap or more accurately RepStrap machine made to resemble an original Darwin mac [[image:cache-dsc03809.jpg|thumb|*http://picasaweb.google.co.uk/VikOlliver/RepRap/photo#5185179602262618562]]4 KB (575 words) - 08:36, 30 December 2014
- ...dpoint, this is not a significant design driver for the current RepRap and RepRap-like 3D printers that are available. The vast majority of low-cost 3D print PCL has been used in prototype RepRap components and also demonstrated in a variety of small robotics projects.12 KB (1,857 words) - 11:46, 9 July 2018
- == Ponoko RepRap - Fitting The Bed and Z Chain == ...gle. Orient the Bed on the Frame such that you can read the laser-etched "RepRap" and "Y-axis" at the same time. There is a notch in the side of the Bed wh6 KB (1,011 words) - 13:46, 29 November 2011
- = Making the Ponoko RepRap Lower Corner Assemblies = The easiest approach to assembling the main RepRap frame is to assemble the Lower Corner Assemblies and Z Motor Assembly first3 KB (512 words) - 13:46, 29 November 2011
- == Ponoko RepRap - Installing Opto Endstops == ...em is a matter of personal choice and practicality: If you often move your RepRap around, it's handy to have the boards strapped to the framework. If you wor2 KB (355 words) - 13:48, 29 November 2011
- = Assembling the Ponoko RepRap Extruder = ...he extruder only are available at http://reprap.svn.sourceforge.net/viewvc/reprap/trunk/users/vik/plywood-robot/acrylic/extruder/ - reprappers cutting discou27 KB (4,707 words) - 13:48, 29 November 2011
- = Ponoko RepRap Extruder Socket Assembly = ...accepts the "handle" on a RepRap lasercut extruder, or one of the printed RepRap exchangeable extruders. This allows you to quickly change between extruders4 KB (642 words) - 13:49, 29 November 2011
- == Assembling The Ponoko RepRap Frame Base == ...in straight lines. The straighter and squarer you make it, the better your RepRap will be. Check all rotating threaded rods and plain rods that are used as s7 KB (1,107 words) - 12:12, 7 March 2013
- == Ponoko RepRap - Bracing The Frame == Fit the Diagonal Brace across the bottom of the RepRap frame, as high up the stubs of the legs as you can. Do not tighten the nuts3 KB (441 words) - 13:49, 29 November 2011
- == Making the Ponoko RepRap Upper Framework ==113 bytes (14 words) - 13:49, 29 November 2011
- == Ponoko RepRap - Installing Opto Endstops == ...sition components, but you can fabricate them once you have completed your RepRap if you wish.4 KB (673 words) - 13:50, 29 November 2011
- |reprap = Darwin = The "Ponoko" RepRap =7 KB (1,029 words) - 06:20, 13 September 2013
- == Ponoko RepRap X Axis Assembly And Installation ==6 KB (1,044 words) - 13:50, 29 November 2011
- = Ponoko RepRap X Motor Assembly =7 KB (1,146 words) - 13:50, 29 November 2011
- == Making the Ponoko RepRap Upper Corners == These are the top corners of the RepRap and construction is similar to the [[PonokoCornerAssembly|lower corners]].2 KB (384 words) - 13:51, 29 November 2011
- = Assembling the Ponoko RepRap X Axis =6 KB (1,014 words) - 13:51, 29 November 2011
- = Ponoko RepRap X Idler Assembly =6 KB (1,085 words) - 13:51, 29 November 2011
- == Making the Ponoko RepRap Y Axis Assemblies == ...nd the Y Motor Assembly. The Y Idlers are possibly the simplest of all the RepRap assemblies to make, so we'll start with them. You'll need to make two.4 KB (725 words) - 12:11, 7 March 2013
- == Ponoko RepRap - Installing The Y Axis ==2 KB (264 words) - 13:52, 29 November 2011
- == Ponoko RepRap - Installing the Z Axis Tensioner == The Z Axis Tensioner is a device that clamps to the RepRap frame and puts pressure on the Z drive chain to keep it taught. This is nec5 KB (826 words) - 13:52, 29 November 2011
- == Assembling The Ponoko RepRap Z Frame ==7 KB (1,280 words) - 13:52, 29 November 2011
- == Making the Ponoko RepRap Z Motor Assembly ==5 KB (832 words) - 13:52, 29 November 2011
- ...the MAX232 chip and its associated capacitors. The data from to and from RepRap's communications ring is sent and received by the Rx/Tx connectors. There # [http://parts.reprap.org/part/module/PowerComms+Board+v1.3 Buy the components with ease]22 KB (3,564 words) - 04:47, 25 July 2015
- Pictures of RepRap for press (or any other) use. ...don't insist on a credit, either, but we'd like you to put "image: http://reprap.org" on them if you can.5 KB (669 words) - 09:36, 22 June 2014
- ...only a few milivolts in noise can give a notable reading fluctuation, and reprap machines are quite noisy. There are thermocouple ICs which report the tempe10 KB (1,622 words) - 12:59, 26 November 2014
- In this section we will discuss a number of materials that can be used with RepRap and the ways to use them, as well as the core information needed for their ...of a chance of it ending up being the main working material of choice for RepRap.10 KB (1,550 words) - 22:11, 8 November 2021
- = RepRap Privacy Policy = ...e third-party advertising companies to serve advertisements when you visit RepRap web pages. These companies may use information ('''not''' including your na580 bytes (90 words) - 13:59, 12 May 2015
- The RepRap project uses [[Wikipedia:PIC_microcontroller|PIC microcontrollers]] as the ...all the PIC pins every time you take them in and out to program them? The RepRap boards are designed for in-circuit programming; [[InCircuitProgramming|for3 KB (445 words) - 15:11, 23 July 2015
- [[image:VikOlliver-reprap first 3D cartesian.jpg|thumb|The First 3D Cartesian reprap axis. (It's mostly Meccano). ]]4 KB (672 words) - 13:53, 29 November 2011
- == RP Orders for the RepRap team == This page is for the RepRap team to upload their components to be built on the RP m/c.1 KB (158 words) - 15:49, 4 January 2015
- between RepRap modules and the controlling PC.577 bytes (80 words) - 07:21, 18 July 2015
- == Other RepRap Sites == * [http://www.reprap.no RepRap in Norway]10 KB (1,422 words) - 04:17, 21 July 2017
- == RepRap Artwork == [[AModernism|Bes]] - the RepRap movement in art and design.576 bytes (88 words) - 15:49, 4 January 2015
- Skip this page. Try [[Installing RepRap on your computer]] instead. ...e recent version of the host software, try the development snapshot [[File:Reprap-mendel-current.zip]]. It'll be updated from time to time.17 KB (2,835 words) - 05:20, 19 July 2015
- ''' This page is outdated, maybe look at [http://reprap.org/wiki/List_of_electronics List of electronics] ''' ...There are basically two interfaces between the electronics: the computer/reprap interface and the electronics/machine interface. These are generally the s5 KB (729 words) - 15:17, 23 July 2015
- == RepRap file format outline and request for comments == ...es or .dwg files into .reprap files. The translator may be our java-based RepRap virtual machine simulator.3 KB (470 words) - 18:12, 26 November 2011
- = Distributing and copying RepRap = ...th.ac.uk University of Bath], [http://adrianbowyer.net Adrian Bowyer], the RepRap researchers (see the project's [[PeopleMain|People page]]), and other contr5 KB (728 words) - 10:26, 8 February 2024
- The '''RepRap host software''' implements the "[[slicer]]" and the "[[G-code]] sender", k ...ably better, implementations of a slicer or a G-code sender or both, see [[RepRap Options#CAM Tools]].13 KB (2,177 words) - 05:27, 19 July 2015
- = Installing the RepRap software under Linux or Unix = ...e it for RepRap use. It then describes how to download and set up all the RepRap software. It should be easy to adapt the descriptions below for other Unix11 KB (1,755 words) - 11:38, 22 July 2015
- = Downloading and installing the RepRap software under Linux or Unix = ...RepRap development. It then describes how to download and set up all the RepRap software16 KB (2,729 words) - 18:13, 26 November 2011
- == The RepRap Logo == Adrian Bowyer came up with the name RepRap, and Ed Sells came up with the logo. The teardrop shape is the profile of a3 KB (396 words) - 18:54, 13 November 2013
- = Installing the RepRap software on OS X (THE OLD, OUTDATED WAY: THIS WILL PROBABLY NOT WORK ANYMOR Note! The RepRap host software was, for a short time, dependent on Java 6. This was reverted3 KB (554 words) - 05:21, 19 July 2015
- = RepRap Firmware = Each set of electronics for RepRap contains some sort of microcontroller (uC). Each uC is a miniature compute2 KB (246 words) - 07:07, 18 July 2015
- = Installing the RepRap software under Windows = ...e it for RepRap use. It then describes how to download and set up all the RepRap software. Note that for many of these installations you will need administ7 KB (1,123 words) - 05:20, 19 July 2015
- = How to build RepRap 1.0 "Darwin" = RepRap 1.0 "Darwin" is a rapid prototyping machine that is capable of making the m16 KB (2,446 words) - 02:11, 23 May 2015
- = RepRap 1.0 "Darwin" = ..., are a complete set of instructions for building the first release of the RepRap machine. These instructions, as well as the machine itself are currently un12 KB (1,963 words) - 18:18, 26 November 2011
- .... The resulting thin stream is laid down in layers to form the parts that RepRap makes. The extruder should work with most thermoplastics up to a temperatu This page describes the standard RepRap polymer extruder. You may also care to check out the [[Extruder Improvemen16 KB (2,696 words) - 23:06, 14 June 2012
- = A RepRap Universal Servo Controller = ...Servo Controlled DC Brushed Motor option for driving the moving bits in a RepRap Robot.17 KB (2,710 words) - 17:33, 16 May 2016
- = RepRap Software Documentation: Preferences/Parameters = = This page is now obsolete. For the up-to-date one [http://objects.reprap.org/wiki/Java_Software_Preferences_File SEE HERE].. =29 KB (4,225 words) - 18:18, 28 November 2014
- WideBar.stl is here: http://reprap.org/wiki/File:RepRapSoftwareTweakingManual-WideBar.stl . Circles.stl is here: http://reprap.org/wiki/File:RepRapSoftwareTweakingManual-Circles.stl .9 KB (1,430 words) - 18:19, 28 November 2014
- ==RepRap Specifications == The reprap will take interchangable heads, such as the PolymorphExtrusionHead, the Slu3 KB (466 words) - 14:02, 29 November 2011
- = RepRap Toolheads = ...an object. That's additive manufacturing, and it's the whole principle of RepRap.2 KB (282 words) - 13:15, 22 November 2015
- = The RepRap Idea = This is the video we made to explain the ideas behind the whole RepRap project. Start with this one of you want an introduction.8 KB (1,207 words) - 23:08, 13 February 2024
- Unlike most of the other electronic components, the small resistors RepRap uses are non-directional. This means that you don't have to worry about wh1 KB (162 words) - 06:14, 30 December 2014
- A few RepRap developers use Microchip [[PIC16F]] or [[PIC18F]] microcontrollers. ...rs -- but, alas, SDCC doesn't work with the Atmel AVR used in the latest [[RepRap Options]].2 KB (361 words) - 07:16, 18 July 2015
- The current Makefile in reprap.sourceforge.net obtains the sdcc sources using: ==SDCC Version Requirements for RepRap ==3 KB (533 words) - 07:22, 18 July 2015
- ...description for an older attempt to communicate between various electronic RepRap components. While there is currently no known device using this, it might b In a RepRap, all of the electronics are comprised of fairly independent modules. In ord17 KB (2,637 words) - 15:20, 28 August 2015
- ==== The RepRap Screw-driven Linear Axis ==== ...As with other RepRap components, this axis was designed to be made by the RepRap rapid prototyper itself, and thus consists of standard parts plus rapid-pro12 KB (1,925 words) - 05:09, 17 December 2011
- ==== The RepRap Screw-driven Linear Stage ==== ...As with other RepRap components, this stage was designed to be made by the RepRap rapid prototyper itself, and thus consists of standard parts plus rapid-pro4 KB (660 words) - 05:09, 17 December 2011
- ...sync your local source files through either IDE). Here's how to create the RepRap project within NetBeans: ...st for the NetBeans project setup files, ''not'' the location of Eclipse's RepRap source files>.3 KB (563 words) - 05:22, 19 July 2015
- = RepRap Showcase = ...cal developments you'll want to check out the [http://reprap.blogspot.com/ RepRap blog] (which also has a complete development history).9 KB (1,479 words) - 18:30, 26 November 2011
- ...pRap researchers on the social, economic, and philosophical aspects of the RepRap project. * [[BackgroundPage|Genesis]] How the RepRap Project came about and what it may mean if it is successful. This paper wa3 KB (471 words) - 09:09, 12 December 2014
- = RepRap software = ...are comes in two chunks: the code that runs in the microcontrollers in the RepRap machine itself, and the code that runs on the host (usually a PC running Li1,016 bytes (160 words) - 03:49, 29 December 2014
- [http://sourceforge.net/projects/reprap/ Our main page on SourceForge is here], and [http://sourceforge.net/project This is the software that runs the actual RepRap machine. It is packaged as a .zip file containing a README, some helper sc3 KB (455 words) - 14:12, 29 November 2011
- [[image:StepperMotor-reprap-stepper.jpg|thumb|The original RepRap, Darwin, used this stepper motor (NEMA 23 size).]] ...ice most are bipolar. They are also the type of motors we are using in the RepRap Project's Mendel and Darwin designs.16 KB (2,597 words) - 17:19, 11 September 2021
- * [[RepRap Buyers' Guide]]553 bytes (73 words) - 11:28, 28 September 2014
- {{Languages|RepRap}}4 KB (677 words) - 17:56, 18 November 2014
- |reprap = Arduino Mega Pololu Shield [http://forums.reprap.org/profile.php?13,16284 TopherMan] -- Initial design ideas and layout.7 KB (1,037 words) - 01:17, 9 October 2017
- <div style="text-align:left">[[File:Logo reprap bogohack 1.png|link=Bogohack|100px]]</div> = '''EMPRESAS DEDICADAS AL MUNDO REPRAP'''=819 bytes (110 words) - 19:47, 27 December 2014
- ...iagnostic device that you can use in place of a stepper motor to test your RepRap controller boards. It is very simple to solder up and use. ...tp://parts.rrrf.org/product_info.php?products_id=45 buy this PCB] from the RepRap Research Foundation, or you can make your own. The image above shows the pr3 KB (493 words) - 04:52, 25 July 2015
- ...ostic device that you can plug in in place of a stepper motor to test your RepRap controller boards. It is very simple to solder up on an old offcut of stri1 KB (230 words) - 20:05, 26 November 2011
- ...n [http://sourceforge.net/project/downloading.php?group_id=159590&filename=reprap-stepper-driver-1.0-r1.zip download the release file] from SourceForge that ...tp://parts.rrrf.org/product_info.php?products_id=53 buy this PCB] from the RepRap Research Foundation, or you can make your own. The image above shows the pr11 KB (1,914 words) - 20:14, 26 November 2011
- ...rd off a single 12v supply. This will allow you, for example, to run your RepRap machine off a car battery if you want. # [http://parts.reprap.org/part/module/Stepper+Motor+Driver+v1.1 Buy the components with ease]24 KB (3,875 words) - 20:13, 26 November 2011
- ...rd off a single 12v supply. This will allow you, for example, to run your RepRap machine off a car battery if you want. # [http://parts.reprap.org/part/module/Stepper+Motor+Driver+v1.2 Buy the components with ease]24 KB (4,088 words) - 05:55, 29 November 2014
- # [http://parts.reprap.org/part/module/Stepper+Motor+Driver+v2.2 Buy the components with ease] You can [http://downloads.sourceforge.net/reprap/reprap-stepper-driver-2.2.zip download the release file] from SourceForge that has13 KB (2,000 words) - 20:13, 26 November 2011
- ...3-stepper-mb-rr.jpg|thumb|400px|Board configurations, left MakerBot, right RepRap]] ...picture on the left shows the MakerBot configuration; on the right is the RepRap one. The differences are explained below.22 KB (3,615 words) - 23:21, 3 February 2024
- ...oller is responsible for a single motor. There are three such modules in a RepRap or RepStrap. See RepStrap for an overview of all the components. ...ion]] repository is [http://reprap.svn.sourceforge.net/viewvc/reprap/trunk/reprap/firmware/devices/stepmotor/ available for viewing].6 KB (906 words) - 05:09, 25 July 2015
- ## For new PICs including 16F628 (for RepRap projects) ...witch configurations. If you're only planning on programming PICs for the RepRap project, you can just hardwire pin 1 to pin 3 with a wire link (and leave p7 KB (1,092 words) - 05:11, 25 July 2015
- ''This article is obsolete. [https://github.com/reprap The latest RepRap source code] is currently hosted at [[GitHub]].'' ...ource code for RepRap was once hosted on [https://sourceforge.net/projects/reprap SourceForge]. More information is available from the [https://sourceforge.n2 KB (295 words) - 23:30, 5 February 2016
- ''This article is obsolete. [https://github.com/reprap The latest RepRap source code] is currently hosted at [[GitHub]].'' ''FIXME: add a link here to the guidelines for committing improvements to the RepRap source code at GitHub. Or should this page be updated to remove all referen5 KB (765 words) - 23:30, 5 February 2016
- The RepRap paste extruder is designed to lay down pastes at room temperature. The typ Then unite the two, plug it into your RepRap machine, and test it dry.13 KB (2,301 words) - 08:06, 4 May 2013
- .../part/module/Temperature+Sensor+v1.0 Buy the components with ease w/ parts.reprap.org] You can [http://downloads.sourceforge.net/reprap/reprap-temperature-sensor-1.0.zip?use_mirror=osdn download the electronics files f7 KB (990 words) - 05:23, 25 July 2015
- .../part/module/Temperature+Sensor+v1.1 Buy the components with ease w/ parts.reprap.org] You can [http://downloads.sourceforge.net/reprap/reprap-temperature-sensor-1.1.zip?use_mirror=osdn download the electronics files f9 KB (1,162 words) - 05:22, 25 July 2015
- .../part/module/Temperature+Sensor+v2.0 Buy the components with ease w/ parts.reprap.org] You can [http://downloads.sourceforge.net/reprap/reprap-temperature-sensor-2.0.zip?use_mirror=osdn download the electronics files f10 KB (1,359 words) - 05:21, 25 July 2015
- |description = A Thermistor is the most commonly used temperature sensor in RepRap printers. The ADC in reprap hardware measures Vout as the fractional voltage between its reference volt28 KB (3,636 words) - 15:56, 27 June 2019
- ...part/module/Thermocouple+Sensor+v1.0 Buy the components with ease w/ parts.reprap.org] You can [http://downloads.sourceforge.net/reprap/reprap-thermocouple-sensor-1.0.zip?use_mirror=osdn download the electronics files11 KB (1,583 words) - 05:18, 25 July 2015
- ...ularly in the software) are user-set and controlled, whereas in a finished RepRap machine these would permenantly be set to defaults. ...aff.bath.ac.uk/ensab/replicator/Downloads/extruder/extruder.html Version 1 RepRap polymorph extruder head] has the great virtue that it works, but it also ha52 KB (8,773 words) - 09:49, 5 January 2015
- ...) instead of the K-type thermocouple, and get the [[Temperature_Sensor_1_1|RepRap thermistor interface PCB]] instead of the thermocouple PCB. ...stripboard when I made the prototype as I did not have a [[PWM_Driver_1_1|RepRap PWM PCB]] to hand, and it is that stripboard circuit that is shown.2 KB (344 words) - 14:19, 29 November 2011
- ...ments the CAD files which can be found at [http://sourceforge.net/projects/reprap Sourceforge] in the CVS repository. As this documentation is written after * Everyone at [http://forums.reprap.org forums.reprap.org] for their contribution to this ongoing development35 KB (5,651 words) - 17:32, 12 March 2021
- RepRap uses the same printed circuit design for both the stepper controllers and t ....sourceforge.net/viewvc/reprap/trunk/reprap/electronics/Universal-pcb/ svn/reprap/electronics/Universal-pcb]19 KB (3,040 words) - 04:53, 25 July 2015
- RepRap uses the same printed circuit design for both the stepper controllers and t ...tp://parts.rrrf.org/product_info.php?products_id=29 buy this PCB] from the RepRap Research Foundation, or you can make your own. The image shows the professi31 KB (5,053 words) - 04:54, 25 July 2015
- |reprap = ? .../1P-Probe/ The "One Penny" Touch Probe], the work done by [http://builders.reprap.org/2008/04/plotting-gerber-files.html Greenarrow] and ongoing discussion r19 KB (3,372 words) - 08:17, 2 January 2015
- ==== The RepRap Vertical Axis ==== ...r RepRap components, this axis and platform was designed to be made by the RepRap rapid prototyper itself, and thus consists of standard parts plus rapid-pro10 KB (1,728 words) - 14:22, 29 November 2011
- In addition to the wire (RepRap standard is to use K-Type thermocouple wire), you will need a small welding3 KB (537 words) - 03:00, 29 December 2014
- * A set of RepRap cutlery * A RepRap paperweight/executive toy for unemployed executives8 KB (1,113 words) - 15:43, 4 January 2015
- ...ke sure you configure your system to use a Sun JRE, not a GCJ one, because Reprap does not (yet?) work with GCJ. ...ork at all, or work partly, resulting in hard-to-find problems running the RepRap host software later.4 KB (670 words) - 12:04, 21 July 2015
- ...Try to avoid solid core wire, particularly for cables that may move as the RepRap operates. Go for the stuff with lots of little strands inside, called - log In order to hook up all the various boards and devices for your RepRap machine, you will need to make cables. Generally this is accomplished by t7 KB (1,132 words) - 08:25, 27 December 2015
- #REDIRECT [[RepRap]]20 bytes (2 words) - 15:49, 6 December 2011
- ...ch.php?0,search=taig,page=1,match_type=ALL,match_dates=730,match_forum=ALL RepRap forums: recent mentions of Taig]1 KB (189 words) - 09:57, 13 November 2013
- ==Demonstrated to work as a RepRap?==384 bytes (54 words) - 05:09, 18 March 2010
- |name = RepRap Gen 2 OnABoard |url = [http://dev.forums.reprap.org/read.php?13,38666 Forum Discussion]10 KB (1,839 words) - 05:07, 25 July 2015
- ...era (como casi todo en este sitio); Todo lo que necesitas hacer es [http://reprap.org/mediawiki/index.php?title=Special:UserLogin&type=signup&returnto=Mendel Hay seis pasos para fabricar una RepRap Versión II "Mendel". Estos son:2 KB (277 words) - 11:42, 12 February 2013
- In this case, RepRap might set it up to get a 2% middle man fee on sales. So I do like your idea, but we might make it auction/tender, RepRap3 KB (486 words) - 01:25, 8 April 2010
- |description = a Gada Prize competing RepRap design based on a fixed bed, gantry style motion system, multiple extruder/ |reprap = sui generis4 KB (650 words) - 12:12, 7 March 2013
- |reprap = Mendel |cadModel = [http://reprap.svn.sourceforge.net/viewvc/reprap/trunk/mendel/mechanics/solid-models/extruders/geared-pinch-wheel/ cad files15 KB (2,556 words) - 00:59, 5 February 2024
- |reprap = Makerbot ...3 Electronics]] by [[User:ZachSmith|Zach Smith]] of [http://www.reprap.org RepRap.org]/[http://www.MakerBot.com MakerBot Industries].10 KB (1,580 words) - 09:31, 7 August 2013
- |reprap = ? http://forums.reprap.org/read.php?171,403412 KB (230 words) - 04:18, 12 September 2013
- |reprap = Sui Generis |url = http://sourceforge.net/projects/reprap/files/CarapaceCopier/2 KB (336 words) - 08:13, 2 January 2015
- ...быстро и легко полностью обесточить ваш RepRap. ...трите все соединения и механизмы вашего RepRap, ищите любые несоответствия или поломки.4 KB (477 words) - 04:35, 22 August 2012
- OK, you've built your RepRap - from a kit, or from scratch. But, before you go off building STL files, t (For programmers, on linux they are stored in the text file ~/.reprap/reprap.properties)3 KB (506 words) - 04:45, 26 November 2011
- ...ть получить файлы для отправки в принтер RepRap. ...распечатки, генерация из них инструкций RepRap G-Code, сохранение G-Code в файл.18 KB (2,265 words) - 15:59, 24 August 2015
- Then use search to find the reprap.properties file. Right click and edit. Search for Port(name) and change to Copied from [[http://forums.reprap.org/read.php?12,4546 RepRap fourm]]4 KB (651 words) - 14:46, 26 November 2011
- This page describes the G Codes that the RepRap firmware uses and how they work. A typical piece of GCode as sent to a RepRap machine might look like this:10 KB (1,582 words) - 04:43, 26 November 2011
- ...спечения. Для этого запустите программу RepRap и нажмите фиолетовую кнопку настройки. When you run the RepRap software it creates you a local copy of the distribution preferences file t27 KB (4,238 words) - 14:46, 26 November 2011
- [[Image:20px-Exquisite-khelpcenter.png|frameless|right]][http://forums.reprap.org/feed.php?41 New Zealand Forum/Mailing List]</h2> |feedurl=http://forums.reprap.org/feed.php?41,replies=1,type=rss14 KB (1,817 words) - 05:52, 21 January 2015
- |name = Isaac - Mendel RepStrap/Reprap |reprap = Mendel4 KB (719 words) - 10:31, 17 June 2016
- People have built RepRap-based ... things ... out of a surprisingly wide variety of materials. Most of the mass of the RepRap is the outer frame.14 KB (2,005 words) - 09:54, 15 June 2020
- ...the GPL license so that ... the GPL license is in compliance with RepRap. RepRap '''is''' released under the [[RepRapGPLLicence|GPL License]]. '''RepRap is planning on continuing to use the GPL for the next 10,000 years. We lik1 KB (215 words) - 13:35, 29 November 2014
- |author = Cliff Mellangård / Reprap österlen |reprap = Smartrap8 KB (1,309 words) - 14:54, 19 September 2018
- {{MOST-RepRap}} ...inputs, and save to a new SCAD file. This is software for supporting the [[RepRap]] 3-D printer community, and was created by the [http://www.appropedia.org/4 KB (555 words) - 12:13, 24 January 2019
- ...n image, inspired by the sculpts of Second Life which do that. I went to #reprap and discussed the possibility of the audio and image files, now that they c9 KB (1,527 words) - 05:49, 26 March 2015
- ...[https://www.youmagine.com/designs/herculien Herculien]. [[http://forums.reprap.org/read.php?397,297740 AluXY]] |reprap = http://forums.reprap.org/read.php?397,297740 AluXY4 KB (624 words) - 09:48, 22 July 2022
- |reprap = Sui Generis ...ss bot and a true reprap, not a repstrap (though I call it a "Vitamin-Rich RepRap" since I favor off-the-shelf components over printed ones where it makes ec4 KB (567 words) - 06:17, 15 February 2011
- #REDIRECT [[Como construir RepRap Versión II "Mendel"]]56 bytes (8 words) - 23:25, 2 June 2010
- ...r plastic that exits an [[extruder]] and is fundamental to the technique [[RepRap machines]] use to build plastic models: [[Glossary#FFF|fused filament fabri ...d [[ABS]] are apparently the most popular feed stock for people who have a RepRap, although researchers are testing other [[:Category:Thermoplastic]] materia5 KB (832 words) - 14:05, 15 April 2016
- |reprap = Mendel5 KB (870 words) - 22:59, 27 March 2012
- |reprap = Mendel471 bytes (66 words) - 14:31, 6 April 2011
- ! Pic !! Name !! Author !! License !!Based on !! RepRap Etchable !! Firmware !! Status !! Notes ! Pic !! Name !!Author !!License !!Based on !!RepRap Etchable !!Built-In Optics !! Firmware !! Status !! Notes !! ~Component Cos18 KB (2,604 words) - 08:58, 6 May 2020
- Welcome to '''Reprap.org''', a wiki for the RepRap community. ...inter, when you can get its plastic parts printed on a previous-generation RepRap.7 KB (1,058 words) - 12:58, 14 July 2014
- If you are planning on buying a RepRap, it may be useful to spend1 KB (200 words) - 12:23, 25 November 2011
- A FlatPack RepStrap or FlatPack RepRap is analogous to flat pack furniture. [[Image:laser-reprap.jpg|right|thumb|300px|another Laser Cut RepRap: [[PonokoRepRap]] ]]6 KB (972 words) - 13:18, 7 October 2015
- |reprap = Sui Generis279 bytes (37 words) - 12:12, 14 December 2014
- |reprap = Mendel ...that they can continue developing and providing technical support for the RepRap community.6 KB (943 words) - 20:16, 20 September 2013
- |reprap = <nowiki>* </nowiki>Thanks to [http://www.reprap.org/wiki/User:Sebastien_Bailard Sebastien] for this warning.8 KB (1,323 words) - 00:29, 1 September 2013
- |reprap = Mendel403 bytes (62 words) - 03:07, 11 April 2010
- On at least some versions of the RepRap Gen3 motherboard, jumpering the auto reset jumper allows the Arduino IDE to .../forums.reprap.org/read.php?12,34524 Sanguino won't compile] thread in the RepRap forums.4 KB (671 words) - 10:52, 29 September 2013
- |reprap = Mendel |url = [http://sci-starborne.dreamwidth.org/tag/reprap Dreamwidth blog (subject tag)]6 KB (964 words) - 21:36, 8 December 2013
- .../reprap/trunk/users/erik/OpenRapMan/EriksBranch/bfb-firmware-dev3/ https://reprap.svn.sourceforge.net/../users/erik/OpenRapMan/EriksBranch/bfb-firmware-dev3] '''If you have changes, send them (.diff files are best) to reprap@erikdebruijn.nl for inclusion in this openRapMan branch.'''4 KB (680 words) - 19:12, 25 May 2011
- |feedurl=http://forums.reprap.org/feed.php?192,replies=1,type=rss You may prefer though to look for a RepRap RUG a little closer if the distance you need to travel is inconvenient.4 KB (719 words) - 03:17, 7 May 2012
- * [[Inbetriebnahme|Reprap Inbetriebnahme]] * [[Installation der Software|Installation der RepRap Hostsoftware]]1 KB (122 words) - 11:40, 15 August 2010
- ...den USA ist Deutschland-Österreich-Schweiz eine der aktivsten Gruppen bei RepRap. [[Image:20px-Exquisite-khelpcenter.png|frameless|right]][http://forums.reprap.org/feed.php?35 Forum/Mailing List]</h2>2 KB (253 words) - 08:59, 8 July 2014
- |reprap = Mendel ...pulse stretcher circuit that makes the pulses a little longer. I am using reprap-gen3-firmware-2009-08-05 (slightly tweaked) on the Arduino that generates t8 KB (1,282 words) - 17:31, 16 May 2016
- ...however, they may be more sticky than slippery. There is a trade off, and RepRap requires much thinner lubricants than axle grease or engine oil. [[Wikipedi * Maintenance - RepRap doesn't wear out lubricant anywhere near as quickly as your car, but dust a18 KB (2,729 words) - 19:09, 11 November 2021
- |reprap = |url = [File:RepRap.lbr]905 bytes (132 words) - 02:43, 29 December 2014
- [[Image:20px-Exquisite-khelpcenter.png|frameless|right]][http://forums.reprap.org/feed.php?102 Forum/Mailing List]</h2> |feedurl=http://forums.reprap.org/feed.php?102,replies=1,type=rss3 KB (461 words) - 09:01, 8 July 2014
- This is the page of the Tokyo RepRap Group (東京都 RepRap グループ). Be proud to be there! This group is still at the wimp state but if you want a RepRap you should join and share you ideas!3 KB (428 words) - 10:19, 31 May 2010
- |description = RepRap Building System |reprap = Eiffel8 KB (1,248 words) - 15:45, 12 November 2021
- |reprap = ? ...e recommendation, it's good to try to keep all your parts and files on the RepRap wiki rather than scattered around so that Mr. Bunny doesn't have to use a s1 KB (178 words) - 14:27, 18 November 2010
- |reprap = ?1 KB (170 words) - 04:21, 26 December 2010
- |reprap = Mendel Carbon Fiber Tubes: [http://forums.reprap.org/read.php?151,59355 Buback's build log]2 KB (309 words) - 16:17, 27 October 2010
- Photographs of [[LaserCut Mendel]], a laser-cut plywood version of RepRap [[Mendel]] by [[User:Kymberlyaandrus]] of Tech Zone Communications. MakerBot RepRap boards turn their own way. My working wiring took a long time. I checked t24 KB (4,167 words) - 06:37, 26 November 2011
- |reprap = Sui Generis1 KB (186 words) - 19:34, 2 October 2010
- About all RepRap stepper drivers are ''bipolar'' (as opposed to ''unipolar''), so if you're ...d exposed as only one wire. This configuration won't work for the standard RepRap electronics. Short of opening the stepper an re-wiring it internally, you h9 KB (1,560 words) - 06:38, 13 May 2016
- [[Image:20px-Exquisite-khelpcenter.png|frameless|right]][http://forums.reprap.org/feed.php?126 Forum/Mailing List]</h2> |feedurl=http://forums.reprap.org/feed.php?126,replies=1,type=rss4 KB (636 words) - 09:02, 8 July 2014
- |reprap = Sui Generis1 KB (150 words) - 21:52, 2 October 2010
- |author = Paulus|reprap = Ultimaker ...w I am after. Any thoughts on extruders for this process and can the stock reprap board run something like this. That way I can have my students use existing3 KB (384 words) - 18:57, 10 December 2010
- |reprap =5 KB (768 words) - 06:43, 9 May 2013
- {{RepRap|name=Mendel|version=II|image=mendel.jpg|description= ...el père de la génétique]. C'est la deuxième version, améliorée de la RepRap : assez petite pour tenir sur votre bureau, mais avec un volume d'impressio4 KB (576 words) - 19:06, 28 November 2014
- * [http://groups.google.com/group/reprap-wa RepRap WA Google Group] * <del>http://www.reprap-wa.org</del> (Dead link)553 bytes (75 words) - 01:04, 8 September 2015
- There are a couple of groups in Brisbane that have had Reprap related activities. ...mer cast parts instead of printed. So, in total, there are 5 operational RepRap's in or very close to the Group. We have also had a couple of Mendel prin1 KB (206 words) - 07:08, 28 August 2019
- |reprap = *If some instructions are difficult to understand, ask in the [http://forums.reprap.org forums] and then update the information here.19 KB (3,112 words) - 09:29, 7 August 2013
- |reprap = Mendel If you build fused-filament-fabrication parts (the technology that RepRap uses) at room temperature, they have a tendency to curl as they cool from t13 KB (2,361 words) - 21:26, 8 December 2013
- |reprap = Mendel6 KB (995 words) - 10:19, 6 May 2014
- ...his is now extended to electronics. All Gen7 PCBs can be manufactured on a RepRap, on a general CNC milling machine, etched with the toner transfer method, o * Discuss this set of electronics in the [http://forums.reprap.org/read.php?181,63487 Generation 7 Electronics forum thread].25 KB (3,841 words) - 01:45, 9 October 2017
- #REDIRECT [[RepRap Buyers' Guide]]34 bytes (4 words) - 12:13, 14 December 2011
- |name = Fully Printable Reprap |description = A Reprap With the Ability to produce a majority of it's own parts2 KB (331 words) - 21:09, 27 February 2011
- |reprap = Sui_Generis653 bytes (93 words) - 21:54, 29 July 2010
- |reprap = Mendel Ideas and feedback in the [http://forums.reprap.org/read.php?152,45753 reprap.org forum thread] is very much appreciated!6 KB (956 words) - 04:13, 16 October 2013
- Related Forum: http://forums.reprap.org/read.php?13,46174 * They Tech Zone Remix boards are tiny compared to the first RepRap electronics, so you don't need all the space the original thick sheet offer3 KB (459 words) - 09:14, 26 November 2011
- [[Image:20px-Exquisite-khelpcenter.png|frameless|right]][http://forums.reprap.org/feed.php?195 Forum/Mailing List]</h2> |feedurl=http://forums.reprap.org/feed.php?195,replies=1,type=rss3 KB (398 words) - 09:03, 8 July 2014
- |reprap =Sui Generis ....org/wiki/Laminated_object_manufacturing Laminated Object Manufacturing]. RepRap-style 3D printers will have trouble making the thin compliant sections with9 KB (1,420 words) - 05:25, 8 September 2013
- {{RepRap|name=Darwin|version=I|image=All 3 axes fdmd sml.jpg|description= ...Se conserva con ánimo puramente documental, si estás buscando la última RepRap, por favor visita la página del proyecto [[RepRap_Mendel|Mendel]].375 bytes (60 words) - 10:23, 25 May 2010
- [[Image:20px-Exquisite-khelpcenter.png|frameless|right]][http://forums.reprap.org/feed.php?37 Forum/Mailing List]</h2> |feedurl=http://forums.reprap.org/feed.php?37,replies=1,type=rss2 KB (248 words) - 03:14, 7 May 2012
- |reprap = The pattern to be etched can be created using a RepRap or other automatic XYZ plotter. This method has been used to make a protot7 KB (1,117 words) - 02:50, 29 December 2014
- ...ーです。これは、２番目の、改善されたバージョンの RepRap で、あなたのデスクに載るくらい小さく、しかし大きな ...のは、あなたの望むものを製作してくれるために使う RepRap ソフトウェアです。私たちは、このソフトウェアと、こ4 KB (175 words) - 08:25, 31 May 2010
- {{RepRap (Deutsch) ...Genetik] "Mendel" benannt ist. Es ist die zweite, verbesserte Version des RepRap: Klein genug um auf dem Schreibtisch Platz zu finden, aber mit einem Druckb4 KB (600 words) - 23:13, 13 February 2024
- RepRap II: Mendel ist Open Source, daher gibt es keinen einzelnen Ort, um die Masc ...ums.reprap.org/index.php?93 Zu-Verkaufen/Gesucht-Forum] wo sich jeder, der RepRap-Teile verkaufen oder kaufen möchte, eintragen kann. ''Caveat emptor'' - Wi10 KB (1,469 words) - 07:11, 20 January 2016
- Es gibt folgende sechs Etappen auf dem Weg, einen RepRap Version II "Mendel" zu bauen: # [[Installation der Software|Herunterladen und Installieren von RepRap auf dem Computer]]725 bytes (89 words) - 07:08, 9 December 2011
- {{Languages|Installing RepRap on your computer}} Die RepRap Software läuft zur Zeit unter 32-Bit-Linux oder Microsoft Windows. Wir arb9 KB (1,397 words) - 15:53, 26 November 2011
- Diese Seiten beschreiben die standardmäßige RepRap-Elektronik. Daneben gibt es jedoch auch [[alternative electronics|alternati * 1 [[Motherboard 1.2 (Deutsch)|RepRap Motherboard]] (''mendel/electronics/motherboard''),2 KB (317 words) - 16:58, 4 December 2011
- Actualmente el softaware RepRap corre bajo Linux 32-bit o Microsoft Windows. Están trabajando en incluir ...l entorno de desarrollo Arduino para compilar el firmware para tu máquina RepRap. Está disponible aquí:10 KB (1,622 words) - 04:37, 26 November 2011
- Estas páginas describen la electrónica estándar RepRap. Quizás te interese comprobar la [[alternative electronics|alternative el * 1 [[Motherboard_1_2|Placa base de RepRap(en inglés)]] (''mendel/electronics/motherboard''),3 KB (391 words) - 09:05, 26 November 2011
- The discussions have migrated from the RepRap forums to the following Google Group: http://groups.google.com/group/bay-area-reprap4 KB (589 words) - 06:44, 6 August 2019
- |RepRap hat ein Motherboard, welches die gesamte Maschine steuert. Jeder Extruder h .../reprap/trunk/mendel/firmware/FiveD_GCode/FiveD_GCode_Interpreter/ hier im RepRap Subversion-Projektarchiv], man genieße sie jedoch mit Vorsicht - Es könnt11 KB (1,556 words) - 04:18, 26 November 2011
- Diese Seiten zeigen, wie man die mechanische Struktur eines RepRap Version II "Mendel" aufbaut. In der [[Mendel Übersicht|Übersicht]] bekomm1 KB (126 words) - 06:24, 26 November 2011
- ...wird. Bevor man die Maschine verkabelt, sollten die Platinen einzeln [[Die RepRap-Elektronik Testen|wie auf dieser Seite beschrieben]] getestet werden. ...reprap/trunk/mendel/electronics/mendel-wiring-diagram.sch?view=log hier im RepRap Subversion-Projektarchiv], es kann jedoch eine unstabile Version in Entwick7 KB (1,057 words) - 23:14, 13 February 2024
- This page will attempt to provide information on how to connect all of the RepRap Generation 3 [http://www.techzonecom.com/detail.php?pr+id=21 TechZone Remix ...the problems that users first run into, as they assemble and connect their RepRap electronics, are related to the assembly of the cables. It is important to23 KB (4,075 words) - 00:41, 29 August 2012
- [[Image:20px-Exquisite-khelpcenter.png|frameless|right]][http://forums.reprap.org/feed.php?196 Forum/Mailing List]</h2> |feedurl=http://forums.reprap.org/feed.php?196,replies=1,type=rss5 KB (763 words) - 05:17, 27 November 2019
- RepRap バージョン2の Mendel は、オープンソースハードウェアな1 KB (28 words) - 07:08, 10 June 2010
- 871 bytes (47 words) - 15:11, 25 November 2011
- * [[Builders/Config/Getting Started|RepRap を使い始めるには]] * [[Installing_RepRap_on_your_computer|RepRap ソフトウェアのインストール]]1 KB (85 words) - 07:54, 10 June 2010
- | [http://RepRapKit.com/ RepRap Kit]1 KB (245 words) - 15:09, 13 July 2012
- [http://www.ebay.co.uk ebay.co.uk] is a good starting point, search for Reprap. Local RepRap User Groups (RUG) are listed at [[:Category:United Kingdom RUG]].2 KB (250 words) - 17:10, 23 March 2017
- La RepRap II: Mendel es hardware de código abierto y por eso no hay un único lugar ...hp?93 Foro Se Busca/Se Vende] donde la gente que tiene juegos de piezas de RepRap para su venta pueda anunciarlo y los demás puedan hacer peticiones de comp8 KB (1,355 words) - 11:45, 24 January 2020
- ..., you are going for one of the cheapest options for getting started with a RepRap. The assembly will probably take a few days, if you don't make too many mi [[File:201011 reprap build 034.jpg]]15 KB (2,600 words) - 04:15, 26 November 2011
- |RepRap tiene una placa base que es el controlador global de la máquina. Cada ext ...descargaste cuando instalaste el software anfitrión Reprap. [[Instalando RepRap en tu computador]]11 KB (1,892 words) - 12:12, 7 March 2013
- Estas páginas te mostrarán como construir la estructura mecánica de RepRap Version II "Mendel". Verifica la [[Visión general de Mendel|visión genera1 KB (201 words) - 13:43, 25 November 2011
- ...rap.org/read.php?151,32525,36593#msg-36593 montaje] posteado en el foro de RepRap.3 KB (538 words) - 12:12, 7 March 2013
- ...nombre configuration.h) hay un valor que necesitarás cambiar para que tu RepRap/RepStrap funcione correctamente.2 KB (268 words) - 16:17, 24 November 2011
- ...montaje, pero si has tenia antes una máquina Darwin (la primera impresora RepRap) te podría gustar saber acerca de algunas de las mejoras que se han ido ac964 bytes (145 words) - 04:34, 26 November 2011
- ...-robot-m4') están disponibles [https://reprap.svn.sourceforge.net/svnroot/reprap/trunk/mendel/mechanics/solid-models aquí]. Necesitarás descargar 'cartesi [https://reprap.svn.sourceforge.net/svnroot/reprap/trunk/mendel/mechanics/solid-models Mendel en formato Solid Edge]3 KB (505 words) - 23:57, 23 August 2012
- Mendel RepRap bearing kits require: | [http://www.reprapcentral.com/Mendel/624-2Z-Bearing-Set/ Reprap Central]2 KB (190 words) - 15:13, 13 July 2012
- |author = RepRap dev team (nophead) |reprap = Mendel2 KB (263 words) - 21:59, 16 January 2011
- Kits de rodamientos de RepRap Mendel que se necesitan: .../www.paoparts.com/fr/roulement-a-billes/12-kit-de-roulement-pour-la-mendel-reprap.html paoparts]786 bytes (102 words) - 15:12, 13 July 2012
- ...e-height:150%; color:#222; padding-left:5px;">Willkommen auf der deutschen RepRap Community Portalseite. Diese Seite befindet sich noch im Aufbau bzw. Übers ...ap Forum] bietet viele Informationen rund um den Bau und die Anwendung von RepRap und RepStrap Maschinen. DER Ort um andere RepRapper zu treffen und Erfahrun3 KB (353 words) - 10:46, 20 May 2018
- * [[RepRap Life Cycle Assessment]] [[Category:RepRap machines]]273 bytes (33 words) - 08:50, 30 December 2014
- |reprap = Mendel [[Image:20px-Exquisite-khelpcenter.png|frameless|right]][http://forums.reprap.org/feed.php?1,55419 Forum/Mailing List]</h2>4 KB (642 words) - 23:17, 13 February 2024
- |reprap = Mendel The Re-Extruder project is intended to be a companion piece to the RepRap, a machine that can take scrap plastic and re-extrude it into feed filament4 KB (658 words) - 01:45, 21 April 2014
- |reprap = Sui Generis ...has four main parts: a PTFE insulator that separates the hot end from the RepRap machine, a brass nozzle, a brass heater block, and a PEEK support that hold15 KB (2,727 words) - 11:12, 30 November 2018
- ...the planet could potentially use your files, [[Development| upload them to RepRap.org]]. ...._Compilers STL to G-Code parser of choice] (e.g. Skeinforge, replicatorG, RepRap Java host, etc.).6 KB (1,094 words) - 06:40, 11 January 2015
- Para subir tu nueva hoja en esta wiki, [http://objects.reprap.org/wiki/media:Mendel-m4-assembly-data-sheet.ods haz click aquí]. Oh, y de parte de la comunidad RepRap - gracias ;-)2 KB (362 words) - 21:16, 20 September 2012
- Esta página describe el extrusor estándar para RepRap Mendel. Hay alternativas experimentales (y mucho más avanzadas) [[Conduct ...n/ThermoplastExtruder_2_0 Thermoplast Extruder Version 2.0(en inglés)] de RepRap. El principio es exactamente el mismo, pero en un nuevo rediseño se ha agr13 KB (2,201 words) - 00:18, 11 September 2012
- #REDIRECT [[R2C2 RepRap Electronics]]37 bytes (5 words) - 07:10, 26 November 2011
- |reprap = Mendel430 bytes (54 words) - 18:50, 19 March 2014
- |reprap = Mendel345 bytes (42 words) - 11:45, 10 February 2011
- |reprap = ...ittle. I would say 1.0mm tip and 0.5mm solder are closer to general use in Reprap electronics (the actual diameter is 0.5~0.54mm just different notations). T34 KB (6,022 words) - 02:44, 29 December 2014
- ...eléctricamente aislante y resistente al calor que tiene muchos usos para Reprap. ...falsas. Y no pueden soportar las temperaturas necesarias para el proyecto RepRap.3 KB (394 words) - 05:52, 1 July 2010
- ...der|Extrusor(en inglés)]] o una [[Heated Bed|Cama térmica(en inglés)]]. RepRap usa Nicrom 80 que está compuesto de un 80% de Niquel y un 20% de Cromo. ...a idea usar un [http://reprap.org/wiki/Nichrome#Suppliers suministrador de RepRap] para asegurarte de que consigues el tipo de alambre adecuado.2 KB (322 words) - 17:49, 29 May 2013
- | [https://reprap.svn.sourceforge.net/svnroot/reprap/trunk/mendel/mechanics/solid-models/cartesian-robot-m4/printed-parts/x-360- | [https://reprap.svn.sourceforge.net/svnroot/reprap/trunk/mendel/mechanics/solid-models/cartesian-robot-m4/printed-parts/x-360-13 KB (1,936 words) - 14:18, 25 November 2011
- | reprap-mother-board-v1.1.par||1||1||PCB2 KB (342 words) - 04:35, 26 November 2011
- To a large extent, the RepRap project is successful because it is open (see [[RepRap and Open Source]]). Openness can be seen as an enabler of collaboration amo4 KB (592 words) - 10:43, 27 July 2015
- ...s'' by which it is developed. In the case of this open design project, the RepRap 3D printer is the subject and it is developed by a community through a dist Do they check in their changes upstream at RepRap or do they try to create downstream documentation repositories?6 KB (901 words) - 22:22, 22 October 2015
- ...built using the constrained set of materials and processes available to a RepRap-style 3D printer. This page collects links to various resources that are r ...ards a [[Development Pathway#more self-replicating | more self-replicating RepRap]].18 KB (2,570 words) - 06:03, 7 December 2017
- |reprap = Sui Generis ...ellow developers in places like the [http://forums.reprap.org/index.php?93 RepRap Marketplace], [http://store.makerbot.com/toolheads/plastruder/mk3-nozzle.ht10 KB (1,681 words) - 13:19, 13 May 2014
- |reprap = Huxley |url = [http://forums.reprap.org/read.php?1,58082,58215#msg-58215 Original forum Post]9 KB (1,536 words) - 09:21, 18 September 2015
- If you have given a talk on RepRap, please post the slides here to help others who may have to do the same. [[File:bowyer-20-mins.odp 20 minute talk by Adrian on RepRap]].172 bytes (33 words) - 09:17, 20 September 2015
- |reprap = Mendel21 KB (3,936 words) - 10:31, 17 June 2016
- Esta página describe como cablear RepRap Versión II "Mendel". Antes de que lo hagas, [[Comprobando_la_electrónica ...l/electronics/mendel-wiring-diagram.sch?view=log repositorio subversion de RepRap aquí]], pero puede ser una versión de desarrollo inestable. En el diagra7 KB (1,251 words) - 04:37, 26 November 2011
- ...ribe como comprobar sobre la mesa todas las placas de circuitos usadas por RepRap antes de instalarlas en la máquina. Los circuitos son bastante robustos y Carga el programa RepRap en tu computador ([[Mendel_User_Manual:_Host_Software |mira aquí si no rec9 KB (1,551 words) - 09:06, 26 November 2011
- * [[Builders/Config/Getting Started|Encendiendo la RepRap(en inglés)]] * [[Instalando_RepRap_en_tu_computador|Instalando el software anfitrión RepRap]]1 KB (181 words) - 05:19, 26 November 2011
- |reprap = [[Image: Reprap_c.jpg|left|thumb|Actual design of my Reprap]]5 KB (854 words) - 18:13, 27 December 2014
- |description = A Motherboard for all the electronics needs of the RepRap Mendel. Based on JohnnyR's Pololu Shield, but expanded. ...is completely un-tested as of now. I'm still in the process of building my reprap. The firmware that works on JohnnyR's pololu shield should also work on thi5 KB (778 words) - 07:55, 22 April 2014
- |reprap = Sui Generis977 bytes (147 words) - 00:24, 25 October 2010
- ...few nuances that should be documented. Unlike the "standard" Mendel, in a reprap with Bowden cable, the "pump" is not mounted directly on the X caret, but i3 KB (570 words) - 15:27, 20 March 2012
- [[Image:20px-Exquisite-khelpcenter.png|frameless|right]][http://forums.reprap.org/feed.php?199 Forum/Mailing List]</h2> |feedurl=http://forums.reprap.org/feed.php?199,replies=1,type=rss2 KB (352 words) - 09:03, 8 July 2014
- [[Image:20px-Exquisite-khelpcenter.png|frameless|right]][http://forums.reprap.org/feed.php?198 Forum/Mailing List]</h2> |feedurl=http://forums.reprap.org/feed.php?198,replies=1,type=rss2 KB (209 words) - 07:42, 2 December 2010
- [[Image:20px-Exquisite-khelpcenter.png|frameless|right]][http://forums.reprap.org/feed.php?200 Forum/Mailing List]</h2> |feedurl=http://forums.reprap.org/feed.php?200,replies=1,type=rss3 KB (373 words) - 09:27, 7 August 2013
- |reprap = Mendel [[Image:20px-Exquisite-khelpcenter.png|frameless|right]][http://forums.reprap.org/feed.php?177,52036 Forum/Mailing List]</h2>4 KB (594 words) - 07:12, 15 January 2011
- |reprap = Sui Generis ...ly, [http://cogsci.mcmaster.ca/~peter/ Peter] posted this [http://builders.reprap.org/2010/07/changing-game-and-using-kapton-tape-as.html great prototype] of6 KB (917 words) - 22:00, 6 February 2013
- There are six stages to making RepRap Beta "Mini Mendel". They are: # [[Installing RepRap on your computer|Downloading and Installing RepRap on your computer]]650 bytes (92 words) - 04:23, 26 November 2011
- ...you how to build the mechanical structure of [[Mini-Mendel]], based on the RepRap Version II "Mendel". Check out the [[Mendel Overview|overview]] to get a fa1 KB (152 words) - 17:37, 24 November 2011
- |reprap = ?1 KB (175 words) - 07:11, 2 January 2015
- |reprap = ...ed to draw circuit boards with an etch resistant pen and is printable on a RepRap. Besides the RP parts all that is needed to operate it is a rubber band whi1 KB (221 words) - 23:20, 13 February 2024
- |reprap = Mendel The latest files may be found [http://reprap.svn.sourceforge.net/viewvc/reprap/trunk/users/Rhys/Multi%20Head%20Bowden%20Carriage/ here].3 KB (506 words) - 21:12, 9 November 2010
- ''(And how exactly is that different from [[RepRap Options]]?)(This effort predated the creation of that page)'' [[Category:RepRap machines]]830 bytes (133 words) - 17:57, 7 March 2019
- |name = RepRap Breeder |reprap = ?6 KB (942 words) - 13:56, 22 October 2013
- |description = Plotting drawings on flat surfaces with RepRap, like plotting on paper or printed circuit boards. |author = RepRap dev team19 KB (3,296 words) - 23:22, 13 February 2024
- |reprap = Mendel ...agement solution. Hopefully bringing an end to tangled messes and [http://reprap.org/wiki/ManagingYourFilament bizarre hanging contraptions]!6 KB (827 words) - 02:59, 3 August 2010
- |reprap = Mendel ...ard mounted [[Pololu stepper driver board]] and connect it to the existing RepRap electronics in order to bypass the noisy inefficient 2 H-bridge hack on the3 KB (444 words) - 07:34, 10 January 2015
- |reprap = ? [[Image:20px-Exquisite-khelpcenter.png|frameless|right]][http://forums.reprap.org/feed.php?88,53045,53052 Forum/Mailing List]</h2>1,021 bytes (140 words) - 15:48, 3 March 2012
- |reprap = Mendel1 KB (192 words) - 19:09, 26 July 2010
- |reprap = Mendel480 bytes (56 words) - 19:13, 26 July 2010
- |reprap = Sui Generis |url = http://forums.reprap.org/read.php?153,5295912 KB (1,984 words) - 05:50, 8 September 2013
- |reprap = Mendel ...de extruder to do very slow turns. Would be connected and controlled from RepRap firmware as if it were another extruder. Possibly use a MAX endstop port f1 KB (189 words) - 08:17, 2 January 2015
- |reprap = ATMEGA644 ...ard solution, so you don't need all those cables and one thick sheet and 4 reprap parts less.26 KB (4,199 words) - 20:05, 15 March 2018
- |reprap = Mendel |cadModel = [http://reprap.svn.sourceforge.net/viewvc/reprap/trunk/mendel/mechanics/solid-models/extruders/geared-pinch-wheel/ cad files18 KB (2,951 words) - 22:02, 7 October 2012
- ...conectados pos don alambres, en la mayoría de la implementación moderna RepRap, pero el diseño original solo usa RS485, y pide un motor de velocidad vari ...thermocouple is connected with the correct polarity. To do this, load the RepRap host software and go to the extruder tab. It should be providing you with a18 KB (3,071 words) - 00:15, 11 September 2012
- * Tony Buser and wife Amy - will bring either MakerBot or RepRap not sure which yet, also a [[Filament Spindle]] Post in the [[http://lists.reprap.org/pipermail/nyc-makerfaire/ RepRap NYC-Maker Faire mailing list] or the forum to try and coordinate a carpool.3 KB (487 words) - 17:33, 24 November 2011
- Hinweis: Dies ist eine Übersetzung der englischen Seite http://objects.reprap.org/wiki/Commissioning. ...e des Motherboards musst Du die Datei configuration.h anpassen, damit Dein RepRap/RepStrap korrekt arbeitet.2 KB (271 words) - 06:31, 26 November 2011
- {{Languages | Testing RepRap Electronics}} Diese Seite beschreibt, wie alle von RepRap verwendeten Platinen ohne die Mechanik getestet werden, bevor sie an der Ma9 KB (1,496 words) - 06:38, 31 July 2014
- #REDIRECT [[Die RepRap-Elektronik Testen]]42 bytes (4 words) - 06:34, 31 July 2014
- Hinweis: Dies ''wird'' eine Übersetzung der englischen Seite http://objects.reprap.org/wiki/Mendel_USB_and_power_connector. ...beschreibt, wie die Stromversorgung und die USB-Verbindung-vom-Computer am RepRap Version II "Mendel" angeschlossen werden.6 KB (891 words) - 14:16, 6 December 2011
- ...ks muss jede Achse zurückfahren, bis der Referenzpunkt erreicht ist. Für RepRap verwenden wir einen Opto-Schalter für jede Achse, um ihre Position zu defi Du brauchst '''3* (drei) davon für eine einfache RepRap-Maschine, und *6''' (sechs) Stück für eine vollständige Maschine mit Gre15 KB (2,283 words) - 09:52, 14 December 2014
- Einige RepRap-Elektroniken sind geeignet, PC-Netzteile direkt und ohne Modifikation anzus Im RepRap-Forum gibt es eine Reihe [http://forums.reprap.org/read.php?13,121279 Erfahrungsberichte mit Netzteilen (englisch)]. Der 519 KB (2,908 words) - 09:35, 30 December 2014
- ''NOTE: This stepper driver board is HIGHLY experimental within the reprap community ( less than 3 known users, none 100% satisfied with their configu also in reprap firmware you need to make it non inverting enabled. reprap gen 3 is inverted for enabled. these electronics are non inverted for enabl9 KB (1,480 words) - 05:58, 29 November 2014
- |cadModel = [http://reprap.svn.sourceforge.net/viewvc/reprap/trunk/mendel/mechanics/solid-models/cartesian-robot-m4/printed-parts/altern |reprap = Mendel3 KB (418 words) - 13:01, 16 January 2011
- |name = A RepRap Breeding Program |reprap = Mendel3 KB (398 words) - 00:01, 29 November 2010
- Some early RepRap/RepStrap prototypes, such early [[Delta]] and [http://builders.reprap.org/search/label/tripod Viktor's tripod repstrap demonstrator],3 KB (396 words) - 11:00, 10 November 2013
- |reprap = Mendel * http://blog.reprap.org/2010/10/story-of-simpler-mendel-pla-bushings.html13 KB (1,967 words) - 11:57, 9 November 2014
- |reprap = mendel/darwin/repstraps The heatbed is often the source of various problems in RepRap 3D printers. The following is a list of possible problems and how to correc27 KB (4,526 words) - 02:36, 20 February 2021
- While current RepRap implementations can print any arbitrary 2D shape on the first layer,2 KB (320 words) - 12:07, 27 October 2014
- |reprap = Sui Generis ...rency - as [http://forums.reprap.org/read.php?171,36476 interpreted by the RepRap Core Team and others] - all documentation for this project will take place16 KB (2,554 words) - 02:35, 24 October 2015
- [[Category:TechZone RepRap machines]]1 KB (210 words) - 07:04, 18 July 2015
- |reprap = Sui Generis For more details see the blog post [http://blog.reprap.org/2010/08/siliconepla-tweezers.html here]1 KB (188 words) - 10:20, 15 December 2010
- [[Image:20px-Exquisite-khelpcenter.png|frameless|right]][http://forums.reprap.org/feed.php?204 Forum/Mailing List]</h2> |feedurl=http://forums.reprap.org/feed.php?204,replies=1,type=rss2 KB (352 words) - 09:04, 8 July 2014
- [[Image:20px-Exquisite-khelpcenter.png|frameless|right]][http://forums.reprap.org/feed.php?31 Forum/Mailing List]</h2> |feedurl=http://forums.reprap.org/feed.php?31,replies=1,type=rss2 KB (359 words) - 09:04, 8 July 2014
- |reprap = Mendel = Imperial Reprap SAE =3 KB (499 words) - 11:50, 22 March 2013
- |reprap = Sui Generis |url = http://reprap.org/wiki/robot_arm3 KB (566 words) - 07:39, 8 September 2013
- ...Mega, clones, and derivatives are being used with the generally peer-used RepRap [[Arduino Mega Pololu Shield]] (RAMPS) cape (add on board)3 KB (416 words) - 11:25, 25 July 2017
- Their first version, used the RepRap [[Generation_3_Electronics]]. ''Not'' open sourced (''aka: [[Neutering a RepRap]]''):3 KB (373 words) - 02:10, 17 October 2016
