Search results

Create the page "RepRap/" on this wiki! See also the search results found.

• Really old stuff
  between RepRap modules and the controlling PC.
  577 bytes (80 words) - 07:21, 18 July 2015
• RelatedSites
  == Other RepRap Sites == * [http://www.reprap.no RepRap in Norway]
  10 KB (1,422 words) - 04:17, 21 July 2017
• RepRapArtworkSection
  == RepRap Artwork == [[AModernism|Bes]] - the RepRap movement in art and design.
  576 bytes (88 words) - 15:49, 4 January 2015
• RepRapDeveloperInstallLinux
  Skip this page. Try [[Installing RepRap on your computer]] instead. ...e recent version of the host software, try the development snapshot [[File:Reprap-mendel-current.zip‎]]. It'll be updated from time to time.
  17 KB (2,835 words) - 05:20, 19 July 2015
• RepRap electronics systems
  ''' This page is outdated, maybe look at [http://reprap.org/wiki/List_of_electronics List of electronics] ''' ...There are basically two interfaces between the electronics: the computer/reprap interface and the electronics/machine interface. These are generally the s
  5 KB (729 words) - 15:17, 23 July 2015
• RepRapFileFormat
  == RepRap file format outline and request for comments == ...es or .dwg files into .reprap files. The translator may be our java-based RepRap virtual machine simulator.
  3 KB (470 words) - 18:12, 26 November 2011
• RepRapGPLLicence
  = Distributing and copying RepRap = ...th.ac.uk University of Bath], [http://adrianbowyer.net Adrian Bowyer], the RepRap researchers (see the project's [[PeopleMain|People page]]), and other contr
  5 KB (728 words) - 10:26, 8 February 2024
• Reprap host software
  The '''RepRap host software''' implements the "[[slicer]]" and the "[[G-code]] sender", k ...ably better, implementations of a slicer or a G-code sender or both, see [[RepRap Options#CAM Tools]].
  13 KB (2,177 words) - 05:27, 19 July 2015
• RepRapLinuxSoftware
  = Installing the RepRap software under Linux or Unix = ...e it for RepRap use. It then describes how to download and set up all the RepRap software. It should be easy to adapt the descriptions below for other Unix
  11 KB (1,755 words) - 11:38, 22 July 2015
• RepRapLinuxSoftware2
  = Downloading and installing the RepRap software under Linux or Unix = ...RepRap development. It then describes how to download and set up all the RepRap software
  16 KB (2,729 words) - 18:13, 26 November 2011
• RepRapLogo
  == The RepRap Logo == Adrian Bowyer came up with the name RepRap, and Ed Sells came up with the logo. The teardrop shape is the profile of a
  3 KB (396 words) - 18:54, 13 November 2013
• RepRapMacSoftware
  = Installing the RepRap software on OS X (THE OLD, OUTDATED WAY: THIS WILL PROBABLY NOT WORK ANYMOR Note! The RepRap host software was, for a short time, dependent on Java 6. This was reverted
  3 KB (554 words) - 05:21, 19 July 2015
• RepRap microcontroller software
  = RepRap Firmware = Each set of electronics for RepRap contains some sort of microcontroller (uC). Each uC is a miniature compute
  2 KB (246 words) - 07:07, 18 July 2015
• RepRapMicrosoftSoftware
  = Installing the RepRap software under Windows = ...e it for RepRap use. It then describes how to download and set up all the RepRap software. Note that for many of these installations you will need administ
  7 KB (1,123 words) - 05:20, 19 July 2015
• RepRapOneDarwin
  = How to build RepRap 1.0 "Darwin" = RepRap 1.0 "Darwin" is a rapid prototyping machine that is capable of making the m
  16 KB (2,446 words) - 02:11, 23 May 2015
• RepRapOneDarwin2
  = RepRap 1.0 "Darwin" = ..., are a complete set of instructions for building the first release of the RepRap machine. These instructions, as well as the machine itself are currently un
  12 KB (1,963 words) - 18:18, 26 November 2011
• RepRapOneDarwinThermoplastExtruder
  .... The resulting thin stream is laid down in layers to form the parts that RepRap makes. The extruder should work with most thermoplastics up to a temperatu This page describes the standard RepRap polymer extruder. You may also care to check out the [[Extruder Improvemen
  16 KB (2,696 words) - 23:06, 14 June 2012
• RepRapServo 1 0
  = A RepRap Universal Servo Controller = ...Servo Controlled DC Brushed Motor option for driving the moving bits in a RepRap Robot.
  17 KB (2,710 words) - 17:33, 16 May 2016
• RepRap software preferences documentation
  = RepRap Software Documentation: Preferences/Parameters = = This page is now obsolete. For the up-to-date one [http://objects.reprap.org/wiki/Java_Software_Preferences_File SEE HERE].. =
  29 KB (4,225 words) - 18:18, 28 November 2014
• RepRap software tweaking manual
  WideBar.stl is here: http://reprap.org/wiki/File:RepRapSoftwareTweakingManual-WideBar.stl . Circles.stl is here: http://reprap.org/wiki/File:RepRapSoftwareTweakingManual-Circles.stl .
  9 KB (1,430 words) - 18:19, 28 November 2014
• RepRapSpecifications
  ==RepRap Specifications == The reprap will take interchangable heads, such as the PolymorphExtrusionHead, the Slu
  3 KB (466 words) - 14:02, 29 November 2011
• RepRapToolHeads
  = RepRap Toolheads = ...an object. That's additive manufacturing, and it's the whole principle of RepRap.
  2 KB (282 words) - 13:15, 22 November 2015
• RepRapVids
  = The RepRap Idea = This is the video we made to explain the ideas behind the whole RepRap project. Start with this one of you want an introduction.
  8 KB (1,207 words) - 23:08, 13 February 2024
• Resistor
  Unlike most of the other electronic components, the small resistors RepRap uses are non-directional. This means that you don't have to worry about wh
  1 KB (162 words) - 06:14, 30 December 2014
• SDCC
  A few RepRap developers use Microchip [[PIC16F]] or [[PIC18F]] microcontrollers. ...rs -- but, alas, SDCC doesn't work with the Atmel AVR used in the latest [[RepRap Options]].
  2 KB (361 words) - 07:16, 18 July 2015
• SDCC version info
  The current Makefile in reprap.sourceforge.net obtains the sdcc sources using: ==SDCC Version Requirements for RepRap ==
  3 KB (533 words) - 07:22, 18 July 2015
• SNAPComms
  ...description for an older attempt to communicate between various electronic RepRap components. While there is currently no known device using this, it might b In a RepRap, all of the electronics are comprised of fairly independent modules. In ord
  17 KB (2,637 words) - 15:20, 28 August 2015
• Screw-drivenLinearAxis
  ==== The RepRap Screw-driven Linear Axis ==== ...As with other RepRap components, this axis was designed to be made by the RepRap rapid prototyper itself, and thus consists of standard parts plus rapid-pro
  12 KB (1,925 words) - 05:09, 17 December 2011
• Screw-drivenLinearStage
  ==== The RepRap Screw-driven Linear Stage ==== ...As with other RepRap components, this stage was designed to be made by the RepRap rapid prototyper itself, and thus consists of standard parts plus rapid-pro
  4 KB (660 words) - 05:09, 17 December 2011
• SettingUpNetBeans
  ...sync your local source files through either IDE). Here's how to create the RepRap project within NetBeans: ...st for the NetBeans project setup files, ''not'' the location of Eclipse's RepRap source files>.
  3 KB (563 words) - 05:22, 19 July 2015
• ShowCase
  = RepRap Showcase = ...cal developments you'll want to check out the [http://reprap.blogspot.com/ RepRap blog] (which also has a complete development history).
  9 KB (1,479 words) - 18:30, 26 November 2011
• Philosophy
  ...pRap researchers on the social, economic, and philosophical aspects of the RepRap project. * [[BackgroundPage|Genesis]] How the RepRap Project came about and what it may mean if it is successful. This paper wa
  3 KB (471 words) - 09:09, 12 December 2014
• SoftwareDocumentation
  = RepRap software = ...are comes in two chunks: the code that runs in the microcontrollers in the RepRap machine itself, and the code that runs on the host (usually a PC running Li
  1,016 bytes (160 words) - 03:49, 29 December 2014
• SourceForge
  [http://sourceforge.net/projects/reprap/ Our main page on SourceForge is here], and [http://sourceforge.net/project This is the software that runs the actual RepRap machine. It is packaged as a .zip file containing a README, some helper sc
  3 KB (455 words) - 14:12, 29 November 2011
• Stepper motor
  [[image:StepperMotor-reprap-stepper.jpg|thumb|The original RepRap, Darwin, used this stepper motor (NEMA 23 size).]] ...ice most are bipolar. They are also the type of motors we are using in the RepRap Project's Mendel and Darwin designs.
  16 KB (2,597 words) - 17:19, 11 September 2021
• NEMA 11 Stepper motor
  * [[RepRap Buyers' Guide]]
  553 bytes (73 words) - 11:28, 28 September 2014
• All metal hotend
  {{Languages|RepRap}}
  4 KB (677 words) - 17:56, 18 November 2014
• Xpresso Smoothie
  |reprap = Arduino Mega Pololu Shield [http://forums.reprap.org/profile.php?13,16284 TopherMan] -- Initial design ideas and layout.
  7 KB (1,037 words) - 01:17, 9 October 2017
• RUG/Colombia
  <div style="text-align:left">[[File:Logo reprap bogohack 1.png|link=Bogohack|100px]]</div> = '''EMPRESAS DEDICADAS AL MUNDO REPRAP'''=
  819 bytes (110 words) - 19:47, 27 December 2014
• LED Stepper Tester v1.0
  ...iagnostic device that you can use in place of a stepper motor to test your RepRap controller boards. It is very simple to solder up and use. ...tp://parts.rrrf.org/product_info.php?products_id=45 buy this PCB] from the RepRap Research Foundation, or you can make your own. The image above shows the pr
  3 KB (493 words) - 04:52, 25 July 2015
• StepperTester Stripboard
  ...ostic device that you can plug in in place of a stepper motor to test your RepRap controller boards. It is very simple to solder up on an old offcut of stri
  1 KB (230 words) - 20:05, 26 November 2011
• Stepper Motor Driver 1.0
  ...n [http://sourceforge.net/project/downloading.php?group_id=159590&filename=reprap-stepper-driver-1.0-r1.zip download the release file] from SourceForge that ...tp://parts.rrrf.org/product_info.php?products_id=53 buy this PCB] from the RepRap Research Foundation, or you can make your own. The image above shows the pr
  11 KB (1,914 words) - 20:14, 26 November 2011
• Stepper Motor Driver 1.1
  ...rd off a single 12v supply. This will allow you, for example, to run your RepRap machine off a car battery if you want. # [http://parts.reprap.org/part/module/Stepper+Motor+Driver+v1.1 Buy the components with ease]
  24 KB (3,875 words) - 20:13, 26 November 2011
• Stepper Motor Driver 1.2
  ...rd off a single 12v supply. This will allow you, for example, to run your RepRap machine off a car battery if you want. # [http://parts.reprap.org/part/module/Stepper+Motor+Driver+v1.2 Buy the components with ease]
  24 KB (4,088 words) - 05:55, 29 November 2014
• Stepper Motor Driver 2.2
  # [http://parts.reprap.org/part/module/Stepper+Motor+Driver+v2.2 Buy the components with ease] You can [http://downloads.sourceforge.net/reprap/reprap-stepper-driver-2.2.zip download the release file] from SourceForge that has
  13 KB (2,000 words) - 20:13, 26 November 2011
• Stepper Motor Driver 2.3
  ...3-stepper-mb-rr.jpg|thumb|400px|Board configurations, left MakerBot, right RepRap]] ...picture on the left shows the MakerBot configuration; on the right is the RepRap one. The differences are explained below.
  22 KB (3,615 words) - 23:21, 3 February 2024
• Build A Stripboard Bipolar Stepper Controller
  ...oller is responsible for a single motor. There are three such modules in a RepRap or RepStrap. See RepStrap for an overview of all the components. ...ion]] repository is [http://reprap.svn.sourceforge.net/viewvc/reprap/trunk/reprap/firmware/devices/stepmotor/ available for viewing].
  6 KB (906 words) - 05:09, 25 July 2015
• Stripboard JDM PIC Programmer
  ## For new PICs including 16F628 (for RepRap projects) ...witch configurations. If you're only planning on programming PICs for the RepRap project, you can just hardwire pin 1 to pin 3 with a wire link (and leave p
  7 KB (1,092 words) - 05:11, 25 July 2015
• Subversion
  ''This article is obsolete. [https://github.com/reprap The latest RepRap source code] is currently hosted at [[GitHub]].'' ...ource code for RepRap was once hosted on [https://sourceforge.net/projects/reprap SourceForge]. More information is available from the [https://sourceforge.n
  2 KB (295 words) - 23:30, 5 February 2016
• SubversionCommitGuidelines
  ''This article is obsolete. [https://github.com/reprap The latest RepRap source code] is currently hosted at [[GitHub]].'' ''FIXME: add a link here to the guidelines for committing improvements to the RepRap source code at GitHub. Or should this page be updated to remove all referen
  5 KB (765 words) - 23:30, 5 February 2016
• SupportExtruder 1 0
  The RepRap paste extruder is designed to lay down pastes at room temperature. The typ Then unite the two, plug it into your RepRap machine, and test it dry.
  13 KB (2,301 words) - 08:06, 4 May 2013
• Temperature Sensor v1.0
  .../part/module/Temperature+Sensor+v1.0 Buy the components with ease w/ parts.reprap.org] You can [http://downloads.sourceforge.net/reprap/reprap-temperature-sensor-1.0.zip?use_mirror=osdn download the electronics files f
  7 KB (990 words) - 05:23, 25 July 2015
• Temperature Sensor v1.1
  .../part/module/Temperature+Sensor+v1.1 Buy the components with ease w/ parts.reprap.org] You can [http://downloads.sourceforge.net/reprap/reprap-temperature-sensor-1.1.zip?use_mirror=osdn download the electronics files f
  9 KB (1,162 words) - 05:22, 25 July 2015
• Temperature Sensor v2.0
  .../part/module/Temperature+Sensor+v2.0 Buy the components with ease w/ parts.reprap.org] You can [http://downloads.sourceforge.net/reprap/reprap-temperature-sensor-2.0.zip?use_mirror=osdn download the electronics files f
  10 KB (1,359 words) - 05:21, 25 July 2015
• Thermistor
  |description = A Thermistor is the most commonly used temperature sensor in RepRap printers. The ADC in reprap hardware measures Vout as the fractional voltage between its reference volt
  28 KB (3,636 words) - 15:56, 27 June 2019
• Thermocouple Sensor v1.0
  ...part/module/Thermocouple+Sensor+v1.0 Buy the components with ease w/ parts.reprap.org] You can [http://downloads.sourceforge.net/reprap/reprap-thermocouple-sensor-1.0.zip?use_mirror=osdn download the electronics files
  11 KB (1,583 words) - 05:18, 25 July 2015
• ThermoplastExtruder
  ...ularly in the software) are user-set and controlled, whereas in a finished RepRap machine these would permenantly be set to defaults. ...aff.bath.ac.uk/ensab/replicator/Downloads/extruder/extruder.html Version 1 RepRap polymorph extruder head] has the great virtue that it works, but it also ha
  52 KB (8,773 words) - 09:49, 5 January 2015
• ThermoplastExtruder 2 0 BoM
  ...) instead of the K-type thermocouple, and get the [[Temperature_Sensor_1_1|RepRap thermistor interface PCB]] instead of the thermocouple PCB. ...stripboard when I made the prototype as I did not have a [[PWM_Driver_1_1|RepRap PWM PCB]] to hand, and it is that stripboard circuit that is shown.
  2 KB (344 words) - 14:19, 29 November 2011
• TobyBorlandOriginal
  ...ments the CAD files which can be found at [http://sourceforge.net/projects/reprap Sourceforge] in the CVS repository. As this documentation is written after * Everyone at [http://forums.reprap.org forums.reprap.org] for their contribution to this ongoing development
  35 KB (5,651 words) - 17:32, 12 March 2021
• Universal Controller Board v1.1
  RepRap uses the same printed circuit design for both the stepper controllers and t ....sourceforge.net/viewvc/reprap/trunk/reprap/electronics/Universal-pcb/ svn/reprap/electronics/Universal-pcb]
  19 KB (3,040 words) - 04:53, 25 July 2015
• Universal Controller Board v1.2
  RepRap uses the same printed circuit design for both the stepper controllers and t ...tp://parts.rrrf.org/product_info.php?products_id=29 buy this PCB] from the RepRap Research Foundation, or you can make your own. The image shows the professi
  31 KB (5,053 words) - 04:54, 25 July 2015
• UniversalPenTouchProbe
  |reprap = ? .../1P-Probe/ The "One Penny" Touch Probe], the work done by [http://builders.reprap.org/2008/04/plotting-gerber-files.html Greenarrow] and ongoing discussion r
  19 KB (3,372 words) - 08:17, 2 January 2015
• VerticalPlatform
  ==== The RepRap Vertical Axis ==== ...r RepRap components, this axis and platform was designed to be made by the RepRap rapid prototyper itself, and thus consists of standard parts plus rapid-pro
  10 KB (1,728 words) - 14:22, 29 November 2011
• WeldYourOwnThermocouple
  In addition to the wire (RepRap standard is to use K-Type thermocouple wire), you will need a small welding
  3 KB (537 words) - 03:00, 29 December 2014
• What would you make
  * A set of RepRap cutlery * A RepRap paperweight/executive toy for unemployed executives
  8 KB (1,113 words) - 15:43, 4 January 2015
• Where is my JRE
  ...ke sure you configure your system to use a Sun JRE, not a GCJ one, because Reprap does not (yet?) work with GCJ. ...ork at all, or work partly, resulting in hard-to-find problems running the RepRap host software later.
  4 KB (670 words) - 12:04, 21 July 2015
• Wires and connectors
  ...Try to avoid solid core wire, particularly for cables that may move as the RepRap operates. Go for the stuff with lots of little strands inside, called - log In order to hook up all the various boards and devices for your RepRap machine, you will need to make cables. Generally this is accomplished by t
  7 KB (1,132 words) - 08:25, 27 December 2015
• WebHome
  #REDIRECT [[RepRap]]
  20 bytes (2 words) - 15:49, 6 December 2011
• Taig Mill
  ...ch.php?0,search=taig,page=1,match_type=ALL,match_dates=730,match_forum=ALL RepRap forums: recent mentions of Taig]
  1 KB (189 words) - 09:57, 13 November 2013
• Sherline Mill
  ==Demonstrated to work as a RepRap?==
  384 bytes (54 words) - 05:09, 18 March 2010
• Generation 2 OnABoard
  |name = RepRap Gen 2 OnABoard |url = [http://dev.forums.reprap.org/read.php?13,38666 Forum Discussion]
  10 KB (1,839 words) - 05:07, 25 July 2015
• Como construir RepRap Versión II "Mendel"
  ...era (como casi todo en este sitio); Todo lo que necesitas hacer es [http://reprap.org/mediawiki/index.php?title=Special:UserLogin&type=signup&returnto=Mendel Hay seis pasos para fabricar una RepRap Versión II "Mendel". Estos son:
  2 KB (277 words) - 11:42, 12 February 2013
• Tender
  In this case, RepRap might set it up to get a 2% middle man fee on sales. So I do like your idea, but we might make it auction/tender, RepRap
  3 KB (486 words) - 01:25, 8 April 2010
• Open Air
  |description = a Gada Prize competing RepRap design based on a fixed bed, gantry style motion system, multiple extruder/ |reprap = sui generis
  4 KB (650 words) - 12:12, 7 March 2013
• Adrian's Geared Extruder
  |reprap = Mendel |cadModel = [http://reprap.svn.sourceforge.net/viewvc/reprap/trunk/mendel/mechanics/solid-models/extruders/geared-pinch-wheel/ cad files
  15 KB (2,556 words) - 00:59, 5 February 2024
• Generation 3 Electronics/Tech Zone Remix
  |reprap = Makerbot ...3 Electronics]] by [[User:ZachSmith|Zach Smith]] of [http://www.reprap.org RepRap.org]/[http://www.MakerBot.com MakerBot Industries].
  10 KB (1,580 words) - 09:31, 7 August 2013
• Granule Extruder Team
  |reprap = ? http://forums.reprap.org/read.php?171,40341
  2 KB (230 words) - 04:18, 12 September 2013
• Carapace-Copier
  |reprap = Sui Generis |url = http://sourceforge.net/projects/reprap/files/CarapaceCopier/
  2 KB (336 words) - 08:13, 2 January 2015
• Сборка/Настройка/С чего начать
  ...быстро и легко полностью обесточить ваш RepRap. ...трите все соединения и механизмы вашего RepRap, ищите любые несоответствия или поломки.
  4 KB (477 words) - 04:35, 22 August 2012
• Сборка/Способы Настройки
  OK, you've built your RepRap - from a kit, or from scratch. But, before you go off building STL files, t (For programmers, on linux they are stored in the text file ~/.reprap/reprap.properties)
  3 KB (506 words) - 04:45, 26 November 2011
• Инструкция по эксплуатации RepRap II "Мендель": Программное обеспечение
  ...ть получить файлы для отправки в принтер RepRap. ...распечатки, генерация из них инструкций RepRap G-Code, сохранение G-Code в файл.
  18 KB (2,265 words) - 15:59, 24 August 2015
• Инструкция по эксплуатации: Программное обеспечение
  Then use search to find the reprap.properties file. Right click and edit. Search for Port(name) and change to Copied from [[http://forums.reprap.org/read.php?12,4546 RepRap fourm]]
  4 KB (651 words) - 14:46, 26 November 2011
• Инструкция по эксплуатации RepRap II "Мендель": RepRapG-Код
  This page describes the G Codes that the RepRap firmware uses and how they work. A typical piece of GCode as sent to a RepRap machine might look like this:
  10 KB (1,582 words) - 04:43, 26 November 2011
• Настройки ПО
  ...спечения. Для этого запустите программу RepRap и нажмите фиолетовую кнопку настройки. When you run the RepRap software it creates you a local copy of the distribution preferences file t
  27 KB (4,238 words) - 14:46, 26 November 2011
• RUG/New Zealand
  [[Image:20px-Exquisite-khelpcenter.png|frameless|right]][http://forums.reprap.org/feed.php?41 New Zealand Forum/Mailing List]</h2> |feedurl=http://forums.reprap.org/feed.php?41,replies=1,type=rss
  14 KB (1,817 words) - 05:52, 21 January 2015
• Isaac
  |name = Isaac - Mendel RepStrap/Reprap |reprap = Mendel
  4 KB (719 words) - 10:31, 17 June 2016
• Frame material
  People have built RepRap-based ... things ... out of a surprisingly wide variety of materials. Most of the mass of the RepRap is the outer frame.
  14 KB (2,005 words) - 09:54, 15 June 2020
• GPL4-Proposal
  ...the GPL license so that ... the GPL license is in compliance with RepRap. RepRap '''is''' released under the [[RepRapGPLLicence|GPL License]]. '''RepRap is planning on continuing to use the GPL for the next 10,000 years. We lik
  1 KB (215 words) - 13:35, 29 November 2014
• Funbot i1
  |author = Cliff Mellangård / Reprap österlen |reprap = Smartrap
  8 KB (1,309 words) - 14:54, 19 September 2018
• Free and Open Source 3-D Model Customizer for Websites to Democratize Design with OpenSCAD
  {{MOST-RepRap}} ...inputs, and save to a new SCAD file. This is software for supporting the [[RepRap]] 3-D printer community, and was created by the [http://www.appropedia.org/
  4 KB (555 words) - 12:13, 24 January 2019
• Hot Rod ROBO
  ...n image, inspired by the sculpts of Second Life which do that. I went to #reprap and discussed the possibility of the audio and image files, now that they c
  9 KB (1,527 words) - 05:49, 26 March 2015
• Spillski
  ...[https://www.youmagine.com/designs/herculien Herculien]. [[http://forums.reprap.org/read.php?397,297740 AluXY]] |reprap = http://forums.reprap.org/read.php?397,297740 AluXY
  4 KB (624 words) - 09:48, 22 July 2022
• Kludgebot
  |reprap = Sui Generis ...ss bot and a true reprap, not a repstrap (though I call it a "Vitamin-Rich RepRap" since I favor off-the-shelf components over printed ones where it makes ec
  4 KB (567 words) - 06:17, 15 February 2011
• Manual de construcción de Mendel
  #REDIRECT [[Como construir RepRap Versión II "Mendel"]]
  56 bytes (8 words) - 23:25, 2 June 2010
• Filament
  ...r plastic that exits an [[extruder]] and is fundamental to the technique [[RepRap machines]] use to build plastic models: [[Glossary#FFF|fused filament fabri ...d [[ABS]] are apparently the most popular feed stock for people who have a RepRap, although researchers are testing other [[:Category:Thermoplastic]] materia
  5 KB (832 words) - 14:05, 15 April 2016
• Y Bed Simplified
  |reprap = Mendel
  5 KB (870 words) - 22:59, 27 March 2012
• Frame Vertex With Foot
  |reprap = Mendel
  471 bytes (66 words) - 14:31, 6 April 2011
• Alternative Electronics
  ! Pic !! Name !! Author !! License !!Based on !! RepRap Etchable !! Firmware !! Status !! Notes ! Pic !! Name !!Author !!License !!Based on !!RepRap Etchable !!Built-In Optics !! Firmware !! Status !! Notes !! ~Component Cos
  18 KB (2,604 words) - 08:58, 6 May 2020
• WikiNode
  Welcome to '''Reprap.org''', a wiki for the RepRap community. ...inter, when you can get its plastic parts printed on a previous-generation RepRap.
  7 KB (1,058 words) - 12:58, 14 July 2014
• Marketplace Guidelines
  If you are planning on buying a RepRap, it may be useful to spend
  1 KB (200 words) - 12:23, 25 November 2011
• FlatPack
  A FlatPack RepStrap or FlatPack RepRap is analogous to flat pack furniture. [[Image:laser-reprap.jpg|right|thumb|300px|another Laser Cut RepRap: [[PonokoRepRap]] ]]
  6 KB (972 words) - 13:18, 7 October 2015
• Untested vase
  |reprap = Sui Generis
  279 bytes (37 words) - 12:12, 14 December 2014
• LaserCut Mendel
  |reprap = Mendel ...that they can continue developing and providing technical support for the RepRap community.
  6 KB (943 words) - 20:16, 20 September 2013
• Waxuum
  |reprap = <nowiki>* </nowiki>Thanks to [http://www.reprap.org/wiki/User:Sebastien_Bailard Sebastien] for this warning.
  8 KB (1,323 words) - 00:29, 1 September 2013
• Z Axis Simplified
  |reprap = Mendel
  403 bytes (62 words) - 03:07, 11 April 2010
• Firmware FAQ
  On at least some versions of the RepRap Gen3 motherboard, jumpering the auto reset jumper allows the Arduino IDE to .../forums.reprap.org/read.php?12,34524 Sanguino won't compile] thread in the RepRap forums.
  4 KB (671 words) - 10:52, 29 September 2013
• Bonsai RepStrap
  |reprap = Mendel |url = [http://sci-starborne.dreamwidth.org/tag/reprap Dreamwidth blog (subject tag)]
  6 KB (964 words) - 21:36, 8 December 2013
• RapManFirmwareDevelopment
  .../reprap/trunk/users/erik/OpenRapMan/EriksBranch/bfb-firmware-dev3/ https://reprap.svn.sourceforge.net/../users/erik/OpenRapMan/EriksBranch/bfb-firmware-dev3] '''If you have changes, send them (.diff files are best) to reprap@erikdebruijn.nl for inclusion in this openRapMan branch.'''
  4 KB (680 words) - 19:12, 25 May 2011
• RUG/UK/Sheffield
  |feedurl=http://forums.reprap.org/feed.php?192,replies=1,type=rss You may prefer though to look for a RepRap RUG a little closer if the distance you need to travel is inconvenient.
  4 KB (719 words) - 03:17, 7 May 2012
• Mendel Gebrauchsanleitung
  * [[Inbetriebnahme|Reprap Inbetriebnahme]] * [[Installation der Software|Installation der RepRap Hostsoftware]]
  1 KB (122 words) - 11:40, 15 August 2010
• RUG/Germany
  ...den USA ist Deutschland-Österreich-Schweiz eine der aktivsten Gruppen bei RepRap. [[Image:20px-Exquisite-khelpcenter.png|frameless|right]][http://forums.reprap.org/feed.php?35 Forum/Mailing List]</h2>
  2 KB (253 words) - 08:59, 8 July 2014
• Microstepping with optical feedback
  |reprap = Mendel ...pulse stretcher circuit that makes the pulses a little longer. I am using reprap-gen3-firmware-2009-08-05 (slightly tweaked) on the Arduino that generates t
  8 KB (1,282 words) - 17:31, 16 May 2016
• Lubrication
  ...however, they may be more sticky than slippery. There is a trade off, and RepRap requires much thinner lubricants than axle grease or engine oil. [[Wikipedi * Maintenance - RepRap doesn't wear out lubricant anywhere near as quickly as your car, but dust a
  18 KB (2,729 words) - 19:09, 11 November 2021
• Eagle Library
  |reprap = |url = [File:RepRap.lbr]
  905 bytes (132 words) - 02:43, 29 December 2014
• RUG/Finland
  [[Image:20px-Exquisite-khelpcenter.png|frameless|right]][http://forums.reprap.org/feed.php?102 Forum/Mailing List]</h2> |feedurl=http://forums.reprap.org/feed.php?102,replies=1,type=rss
  3 KB (461 words) - 09:01, 8 July 2014
• RUG/Japan/Tokyo
  This is the page of the Tokyo RepRap Group (東京都 RepRap グループ). Be proud to be there! This group is still at the wimp state but if you want a RepRap you should join and share you ideas!
  3 KB (428 words) - 10:19, 31 May 2010
• RBS Overview
  |description = RepRap Building System |reprap = Eiffel
  8 KB (1,248 words) - 15:45, 12 November 2021
• Pinch Block
  |reprap = ? ...e recommendation, it's good to try to keep all your parts and files on the RepRap wiki rather than scattered around so that Mr. Bunny doesn't have to use a s
  1 KB (178 words) - 14:27, 18 November 2010
• Cabinet Widget
  |reprap = ?
  1 KB (170 words) - 04:21, 26 December 2010
• Alternative Rails
  |reprap = Mendel Carbon Fiber Tubes: [http://forums.reprap.org/read.php?151,59355 Buback's build log]
  2 KB (309 words) - 16:17, 27 October 2010
• LaserCut Mendel Assembly Blog
  Photographs of [[LaserCut Mendel]], a laser-cut plywood version of RepRap [[Mendel]] by [[User:Kymberlyaandrus]] of Tech Zone Communications. MakerBot RepRap boards turn their own way. My working wiring took a long time. I checked t
  24 KB (4,167 words) - 06:37, 26 November 2011
• Shaft Collars
  |reprap = Sui Generis
  1 KB (186 words) - 19:34, 2 October 2010
• Stepper wiring
  About all RepRap stepper drivers are ''bipolar'' (as opposed to ''unipolar''), so if you're ...d exposed as only one wire. This configuration won't work for the standard RepRap electronics. Short of opening the stepper an re-wiring it internally, you h
  9 KB (1,560 words) - 06:38, 13 May 2016
• RUG/Sweden
  [[Image:20px-Exquisite-khelpcenter.png|frameless|right]][http://forums.reprap.org/feed.php?126 Forum/Mailing List]</h2> |feedurl=http://forums.reprap.org/feed.php?126,replies=1,type=rss
  4 KB (636 words) - 09:02, 8 July 2014
• Brackets
  |reprap = Sui Generis
  1 KB (150 words) - 21:52, 2 October 2010
• ArizoBot
  |author = Paulus|reprap = Ultimaker ...w I am after. Any thoughts on extruders for this process and can the stock reprap board run something like this. That way I can have my students use existing
  3 KB (384 words) - 18:57, 10 December 2010
• FirmwareWishList
  |reprap =
  5 KB (768 words) - 06:43, 9 May 2013
• Mendel fr
  {{RepRap|name=Mendel|version=II|image=mendel.jpg|description= ...el père de la génétique]. C'est la deuxième version, améliorée de la RepRap : assez petite pour tenir sur votre bureau, mais avec un volume d'impressio
  4 KB (576 words) - 19:06, 28 November 2014
• RUG/Australia/Perth
  * [http://groups.google.com/group/reprap-wa RepRap WA Google Group] * <del>http://www.reprap-wa.org</del> (Dead link)
  553 bytes (75 words) - 01:04, 8 September 2015
• RUG/Australia/Brisbane
  There are a couple of groups in Brisbane that have had Reprap related activities. ...mer cast parts instead of printed. So, in total, there are 5 operational RepRap's in or very close to the Group. We have also had a couple of Mendel prin
  1 KB (206 words) - 07:08, 28 August 2019
• Generation 3 Electronics/Tech Zone Remix/How to
  |reprap = *If some instructions are difficult to understand, ask in the [http://forums.reprap.org forums] and then update the information here.
  19 KB (3,112 words) - 09:29, 7 August 2013
• Mendel heated bed
  |reprap = Mendel If you build fused-filament-fabrication parts (the technology that RepRap uses) at room temperature, they have a tendency to curl as they cool from t
  13 KB (2,361 words) - 21:26, 8 December 2013
• Geared Nema17 Extruder V0.5
  |reprap = Mendel
  6 KB (995 words) - 10:19, 6 May 2014
• Generation 7 Electronics
  ...his is now extended to electronics. All Gen7 PCBs can be manufactured on a RepRap, on a general CNC milling machine, etched with the toner transfer method, o * Discuss this set of electronics in the [http://forums.reprap.org/read.php?181,63487 Generation 7 Electronics forum thread].
  25 KB (3,841 words) - 01:45, 9 October 2017
• Acquisition of parts
  #REDIRECT [[RepRap Buyers' Guide]]
  34 bytes (4 words) - 12:13, 14 December 2011
• Fully printable reprap
  |name = Fully Printable Reprap |description = A Reprap With the Ability to produce a majority of it's own parts
  2 KB (331 words) - 21:09, 27 February 2011
• FD pencil case
  |reprap = Sui_Generis
  653 bytes (93 words) - 21:54, 29 July 2010
• Adesina - A Wooden Mendel RepStrap
  |reprap = Mendel Ideas and feedback in the [http://forums.reprap.org/read.php?152,45753 reprap.org forum thread] is very much appreciated!
  6 KB (956 words) - 04:13, 16 October 2013
• Generation 3 Electronics/Tech Zone Remix/How to/FAQ Page
  Related Forum: http://forums.reprap.org/read.php?13,46174 * They Tech Zone Remix boards are tiny compared to the first RepRap electronics, so you don't need all the space the original thick sheet offer
  3 KB (459 words) - 09:14, 26 November 2011
• RUG/Oregon/Portland
  [[Image:20px-Exquisite-khelpcenter.png|frameless|right]][http://forums.reprap.org/feed.php?195 Forum/Mailing List]</h2> |feedurl=http://forums.reprap.org/feed.php?195,replies=1,type=rss
  3 KB (398 words) - 09:03, 8 July 2014
• Compliant Linear Motion Mechanism 1
  |reprap =Sui Generis ....org/wiki/Laminated_object_manufacturing Laminated Object Manufacturing]. RepRap-style 3D printers will have trouble making the thin compliant sections with
  9 KB (1,420 words) - 05:25, 8 September 2013
• RepRap Darwin
  {{RepRap|name=Darwin|version=I|image=All 3 axes fdmd sml.jpg|description= ...Se conserva con ánimo puramente documental, si estás buscando la última RepRap, por favor visita la página del proyecto [[RepRap_Mendel|Mendel]].
  375 bytes (60 words) - 10:23, 25 May 2010
• RUG/North Carolina
  [[Image:20px-Exquisite-khelpcenter.png|frameless|right]][http://forums.reprap.org/feed.php?37 Forum/Mailing List]</h2> |feedurl=http://forums.reprap.org/feed.php?37,replies=1,type=rss
  2 KB (248 words) - 03:14, 7 May 2012
• Metal Etching Scriber
  |reprap = The pattern to be etched can be created using a RepRap or other automatic XYZ plotter. This method has been used to make a protot
  7 KB (1,117 words) - 02:50, 29 December 2014
• Mendel in Japanese
  ...ーです。これは、２番目の、改善されたバージョンの RepRap で、あなたのデスクに載るくらい小さく、しかし大きな ...のは、あなたの望むものを製作してくれるために使う RepRap ソフトウェアです。私たちは、このソフトウェアと、こ
  4 KB (175 words) - 08:25, 31 May 2010
• Mendel/de
  {{RepRap (Deutsch) ...Genetik] "Mendel" benannt ist. Es ist die zweite, verbesserte Version des RepRap: Klein genug um auf dem Schreibtisch Platz zu finden, aber mit einem Druckb
  4 KB (600 words) - 23:13, 13 February 2024
• Mendel Einkaufsführer
  RepRap II: Mendel ist Open Source, daher gibt es keinen einzelnen Ort, um die Masc ...ums.reprap.org/index.php?93 Zu-Verkaufen/Gesucht-Forum] wo sich jeder, der RepRap-Teile verkaufen oder kaufen möchte, eintragen kann. ''Caveat emptor'' - Wi
  10 KB (1,469 words) - 07:11, 20 January 2016
• Mendel Build Manual/de
  Es gibt folgende sechs Etappen auf dem Weg, einen RepRap Version II "Mendel" zu bauen: # [[Installation der Software|Herunterladen und Installieren von RepRap auf dem Computer]]
  725 bytes (89 words) - 07:08, 9 December 2011
• Installing RepRap on your computer/de
  {{Languages|Installing RepRap on your computer}} Die RepRap Software läuft zur Zeit unter 32-Bit-Linux oder Microsoft Windows. Wir arb
  9 KB (1,397 words) - 15:53, 26 November 2011
• Platinenbau
  Diese Seiten beschreiben die standardmäßige RepRap-Elektronik. Daneben gibt es jedoch auch [[alternative electronics|alternati * 1 [[Motherboard 1.2 (Deutsch)|RepRap Motherboard]] (''mendel/electronics/motherboard''),
  2 KB (317 words) - 16:58, 4 December 2011
• Instalando RepRap en tu computador
  Actualmente el softaware RepRap corre bajo Linux 32-bit o Microsoft Windows. Están trabajando en incluir ...l entorno de desarrollo Arduino para compilar el firmware para tu máquina RepRap. Está disponible aquí:
  10 KB (1,622 words) - 04:37, 26 November 2011
• Construcción de los circuitos de la placa
  Estas páginas describen la electrónica estándar RepRap. Quizás te interese comprobar la [[alternative electronics|alternative el * 1 [[Motherboard_1_2|Placa base de RepRap(en inglés)]] (''mendel/electronics/motherboard''),
  3 KB (391 words) - 09:05, 26 November 2011
• RUG/California/Bay Area
  The discussions have migrated from the RepRap forums to the following Google Group: http://groups.google.com/group/bay-area-reprap
  4 KB (589 words) - 06:44, 6 August 2019
• Microcontroller Firmwareinstallation
  |RepRap hat ein Motherboard, welches die gesamte Maschine steuert. Jeder Extruder h .../reprap/trunk/mendel/firmware/FiveD_GCode/FiveD_GCode_Interpreter/ hier im RepRap Subversion-Projektarchiv], man genieße sie jedoch mit Vorsicht - Es könnt
  11 KB (1,556 words) - 04:18, 26 November 2011
• Mechanischer Aufbau
  Diese Seiten zeigen, wie man die mechanische Struktur eines RepRap Version II "Mendel" aufbaut. In der [[Mendel Übersicht|Übersicht]] bekomm
  1 KB (126 words) - 06:24, 26 November 2011
• Elektroverkabelung
  ...wird. Bevor man die Maschine verkabelt, sollten die Platinen einzeln [[Die RepRap-Elektronik Testen|wie auf dieser Seite beschrieben]] getestet werden. ...reprap/trunk/mendel/electronics/mendel-wiring-diagram.sch?view=log hier im RepRap Subversion-Projektarchiv], es kann jedoch eine unstabile Version in Entwick
  7 KB (1,057 words) - 23:14, 13 February 2024
• Generation 3 Electronics/Tech Zone Remix/Installation
  This page will attempt to provide information on how to connect all of the RepRap Generation 3 [http://www.techzonecom.com/detail.php?pr+id=21 TechZone Remix ...the problems that users first run into, as they assemble and connect their RepRap electronics, are related to the assembly of the cables. It is important to
  23 KB (4,075 words) - 00:41, 29 August 2012
• RUG/Malaysia
  [[Image:20px-Exquisite-khelpcenter.png|frameless|right]][http://forums.reprap.org/feed.php?196 Forum/Mailing List]</h2> |feedurl=http://forums.reprap.org/feed.php?196,replies=1,type=rss
  5 KB (763 words) - 05:17, 27 November 2019
• Mendel Buyers Guide in Japanese
  RepRap バージョン2の Mendel は、オープンソースハードウェアな
  1 KB (28 words) - 07:08, 10 June 2010
• Mendel Build Manual in Japanese
  871 bytes (47 words) - 15:11, 25 November 2011
• Mendel User Manual in Japanese
  * [[Builders/Config/Getting Started|RepRap を使い始めるには]] * [[Installing_RepRap_on_your_computer|RepRap ソフトウェアのインストール]]
  1 KB (85 words) - 07:54, 10 June 2010
• Feedstock
  | [http://RepRapKit.com/ RepRap Kit]
  1 KB (245 words) - 15:09, 13 July 2012
• UK Suppliers
  [http://www.ebay.co.uk ebay.co.uk] is a good starting point, search for Reprap. Local RepRap User Groups (RUG) are listed at [[:Category:United Kingdom RUG]].
  2 KB (250 words) - 17:10, 23 March 2017
• Guía del comprador de Mendel
  La RepRap II: Mendel es hardware de código abierto y por eso no hay un único lugar ...hp?93 Foro Se Busca/Se Vende] donde la gente que tiene juegos de piezas de RepRap para su venta pueda anunciarlo y los demás puedan hacer peticiones de comp
  8 KB (1,355 words) - 11:45, 24 January 2020
• LaserCut Mendel Assembly
  ..., you are going for one of the cheapest options for getting started with a RepRap. The assembly will probably take a few days, if you don't make too many mi [[File:201011 reprap build 034.jpg]]
  15 KB (2,600 words) - 04:15, 26 November 2011
• Instalación del firmware del microcontrolador
  |RepRap tiene una placa base que es el controlador global de la máquina. Cada ext ...descargaste cuando instalaste el software anfitrión Reprap. [[Instalando RepRap en tu computador]]
  11 KB (1,892 words) - 12:12, 7 March 2013
• Construcción mecánica de Mendel
  Estas páginas te mostrarán como construir la estructura mecánica de RepRap Version II "Mendel". Verifica la [[Visión general de Mendel|visión genera
  1 KB (201 words) - 13:43, 25 November 2011
• Notas de ensamblaje de Mendel
  ...rap.org/read.php?151,32525,36593#msg-36593 montaje] posteado en el foro de RepRap.
  3 KB (538 words) - 12:12, 7 March 2013
• Puesta en marcha
  ...nombre configuration.h) hay un valor que necesitarás cambiar para que tu RepRap/RepStrap funcione correctamente.
  2 KB (268 words) - 16:17, 24 November 2011
• Visión general de Mendel
  ...montaje, pero si has tenia antes una máquina Darwin (la primera impresora RepRap) te podría gustar saber acerca de algunas de las mejoras que se han ido ac
  964 bytes (145 words) - 04:34, 26 November 2011
• Mendel/Archivos
  ...-robot-m4') están disponibles [https://reprap.svn.sourceforge.net/svnroot/reprap/trunk/mendel/mechanics/solid-models aquí]. Necesitarás descargar 'cartesi [https://reprap.svn.sourceforge.net/svnroot/reprap/trunk/mendel/mechanics/solid-models Mendel en formato Solid Edge]
  3 KB (505 words) - 23:57, 23 August 2012
• Mendel Bearing Kits
  Mendel RepRap bearing kits require: | [http://www.reprapcentral.com/Mendel/624-2Z-Bearing-Set/ Reprap Central]
  2 KB (190 words) - 15:13, 13 July 2012
• Mendel heated room
  |author = RepRap dev team (nophead) |reprap = Mendel
  2 KB (263 words) - 21:59, 16 January 2011
• Kits de rodamientos de Mendel
  Kits de rodamientos de RepRap Mendel que se necesitan: .../www.paoparts.com/fr/roulement-a-billes/12-kit-de-roulement-pour-la-mendel-reprap.html paoparts]
  786 bytes (102 words) - 15:12, 13 July 2012
• Community portal/de
  ...e-height:150%; color:#222; padding-left:5px;">Willkommen auf der deutschen RepRap Community Portalseite. Diese Seite befindet sich noch im Aufbau bzw. Übers ...ap Forum] bietet viele Informationen rund um den Bau und die Anwendung von RepRap und RepStrap Maschinen. DER Ort um andere RepRapper zu treffen und Erfahrun
  3 KB (353 words) - 10:46, 20 May 2018
• Sustainability
  * [[RepRap Life Cycle Assessment]] [[Category:RepRap machines]]
  273 bytes (33 words) - 08:50, 30 December 2014
• Foton 3Dprinter
  |reprap = Mendel [[Image:20px-Exquisite-khelpcenter.png|frameless|right]][http://forums.reprap.org/feed.php?1,55419 Forum/Mailing List]</h2>
  4 KB (642 words) - 23:17, 13 February 2024
• Re-Extruder
  |reprap = Mendel The Re-Extruder project is intended to be a companion piece to the RepRap, a machine that can take scrap plastic and re-extrude it into feed filament
  4 KB (658 words) - 01:45, 21 April 2014
• Geared extruder nozzle
  |reprap = Sui Generis ...has four main parts: a PTFE insulator that separates the hot end from the RepRap machine, a brass nozzle, a brass heater block, and a PEEK support that hold
  15 KB (2,727 words) - 11:12, 30 November 2018
• Using Blender for making print-sheets
  ...the planet could potentially use your files, [[Development| upload them to RepRap.org]]. ...._Compilers STL to G-Code parser of choice] (e.g. Skeinforge, replicatorG, RepRap Java host, etc.).
  6 KB (1,094 words) - 06:40, 11 January 2015
• Especificaciones de montaje de Mendel
  Para subir tu nueva hoja en esta wiki, [http://objects.reprap.org/wiki/media:Mendel-m4-assembly-data-sheet.ods‎ haz click aquí]. Oh, y de parte de la comunidad RepRap - gracias ;-)
  2 KB (362 words) - 21:16, 20 September 2012
• Extrusor de Mendel
  Esta página describe el extrusor estándar para RepRap Mendel. Hay alternativas experimentales (y mucho más avanzadas) [[Conduct ...n/ThermoplastExtruder_2_0 Thermoplast Extruder Version 2.0(en inglés)] de RepRap. El principio es exactamente el mismo, pero en un nuevo rediseño se ha agr
  13 KB (2,201 words) - 00:18, 11 September 2012
• HB RepRap Electronics
  #REDIRECT [[R2C2 RepRap Electronics]]
  37 bytes (5 words) - 07:10, 26 November 2011
• RB Thermal Barriers
  |reprap = Mendel
  430 bytes (54 words) - 18:50, 19 March 2014
• Punnett
  |reprap = Mendel
  345 bytes (42 words) - 11:45, 10 February 2011
• DIY PCBs double sided toner transfer
  |reprap = ...ittle. I would say 1.0mm tip and 0.5mm solder are closer to general use in Reprap electronics (the actual diameter is 0.5~0.54mm just different notations). T
  34 KB (6,022 words) - 02:44, 29 December 2014
• Cinta Kapton
  ...eléctricamente aislante y resistente al calor que tiene muchos usos para Reprap. ...falsas. Y no pueden soportar las temperaturas necesarias para el proyecto RepRap.
  3 KB (394 words) - 05:52, 1 July 2010
• Alambre nicrom
  ...der|Extrusor(en inglés)]] o una [[Heated Bed|Cama térmica(en inglés)]]. RepRap usa Nicrom 80 que está compuesto de un 80% de Niquel y un 20% de Cromo. ...a idea usar un [http://reprap.org/wiki/Nichrome#Suppliers suministrador de RepRap] para asegurarte de que consigues el tipo de alambre adecuado.
  2 KB (322 words) - 17:49, 29 May 2013
• Eje-X de Mendel
  | [https://reprap.svn.sourceforge.net/svnroot/reprap/trunk/mendel/mechanics/solid-models/cartesian-robot-m4/printed-parts/x-360- | [https://reprap.svn.sourceforge.net/svnroot/reprap/trunk/mendel/mechanics/solid-models/cartesian-robot-m4/printed-parts/x-360-
  13 KB (1,936 words) - 14:18, 25 November 2011
• Placas de circuitos de Mendel
  | reprap-mother-board-v1.1.par||1||1||PCB
  2 KB (342 words) - 04:35, 26 November 2011
• Open source hardware
  To a large extent, the RepRap project is successful because it is open (see [[RepRap and Open Source]]). Openness can be seen as an enabler of collaboration amo
  4 KB (592 words) - 10:43, 27 July 2015
• Degrees of openness
  ...s'' by which it is developed. In the case of this open design project, the RepRap 3D printer is the subject and it is developed by a community through a dist Do they check in their changes upstream at RepRap or do they try to create downstream documentation repositories?
  6 KB (901 words) - 22:22, 22 October 2015
• Actuator Fabrication
  ...built using the constrained set of materials and processes available to a RepRap-style 3D printer. This page collects links to various resources that are r ...ards a [[Development Pathway#more self-replicating | more self-replicating RepRap]].
  18 KB (2,570 words) - 06:03, 7 December 2017
• Extruder Nozzle Variations
  |reprap = Sui Generis ...ellow developers in places like the [http://forums.reprap.org/index.php?93 RepRap Marketplace], [http://store.makerbot.com/toolheads/plastruder/mk3-nozzle.ht
  10 KB (1,681 words) - 13:19, 13 May 2014
• Huxley Seedling
  |reprap = Huxley |url = [http://forums.reprap.org/read.php?1,58082,58215#msg-58215 Original forum Post]
  9 KB (1,536 words) - 09:21, 18 September 2015
• RepRap Talks
  If you have given a talk on RepRap, please post the slides here to help others who may have to do the same. [[File:bowyer-20-mins.odp 20 minute talk by Adrian on RepRap]].
  172 bytes (33 words) - 09:17, 20 September 2015
• MegaMendel
  |reprap = Mendel
  21 KB (3,936 words) - 10:31, 17 June 2016
• Cableado electrónico
  Esta página describe como cablear RepRap Versión II "Mendel". Antes de que lo hagas, [[Comprobando_la_electrónica ...l/electronics/mendel-wiring-diagram.sch?view=log repositorio subversion de RepRap aquí]], pero puede ser una versión de desarrollo inestable. En el diagra
  7 KB (1,251 words) - 04:37, 26 November 2011
• Comprobando la electrónica RepRap
  ...ribe como comprobar sobre la mesa todas las placas de circuitos usadas por RepRap antes de instalarlas en la máquina. Los circuitos son bastante robustos y Carga el programa RepRap en tu computador ([[Mendel_User_Manual:_Host_Software |mira aquí si no rec
  9 KB (1,551 words) - 09:06, 26 November 2011
• Manual de usuario de Mendel
  * [[Builders/Config/Getting Started|Encendiendo la RepRap(en inglés)]] * [[Instalando_RepRap_en_tu_computador|Instalando el software anfitrión RepRap]]
  1 KB (181 words) - 05:19, 26 November 2011
• Francisco
  |reprap = [[Image: Reprap_c.jpg|left|thumb|Actual design of my Reprap]]
  5 KB (854 words) - 18:13, 27 December 2014
• All In One Electronics
  |description = A Motherboard for all the electronics needs of the RepRap Mendel. Based on JohnnyR's Pololu Shield, but expanded. ...is completely un-tested as of now. I'm still in the process of building my reprap. The firmware that works on JohnnyR's pololu shield should also work on thi
  5 KB (778 words) - 07:55, 22 April 2014
• Extruder Driver Variations
  |reprap = Sui Generis
  977 bytes (147 words) - 00:24, 25 October 2010
• TZBowdenExtruder
  ...few nuances that should be documented. Unlike the "standard" Mendel, in a reprap with Bowden cable, the "pump" is not mounted directly on the X caret, but i
  3 KB (570 words) - 15:27, 20 March 2012
• RUG/Hawaii
  [[Image:20px-Exquisite-khelpcenter.png|frameless|right]][http://forums.reprap.org/feed.php?199 Forum/Mailing List]</h2> |feedurl=http://forums.reprap.org/feed.php?199,replies=1,type=rss
  2 KB (352 words) - 09:03, 8 July 2014
• RUG/Latvia
  [[Image:20px-Exquisite-khelpcenter.png|frameless|right]][http://forums.reprap.org/feed.php?198 Forum/Mailing List]</h2> |feedurl=http://forums.reprap.org/feed.php?198,replies=1,type=rss
  2 KB (209 words) - 07:42, 2 December 2010
• RUG/Canada/Saskatchewan
  [[Image:20px-Exquisite-khelpcenter.png|frameless|right]][http://forums.reprap.org/feed.php?200 Forum/Mailing List]</h2> |feedurl=http://forums.reprap.org/feed.php?200,replies=1,type=rss
  3 KB (373 words) - 09:27, 7 August 2013
• XCbot
  |reprap = Mendel [[Image:20px-Exquisite-khelpcenter.png|frameless|right]][http://forums.reprap.org/feed.php?177,52036 Forum/Mailing List]</h2>
  4 KB (594 words) - 07:12, 15 January 2011
• Gears:Simultaneous Meshing with Rack
  |reprap = Sui Generis ...ly, [http://cogsci.mcmaster.ca/~peter/ Peter] posted this [http://builders.reprap.org/2010/07/changing-game-and-using-kapton-tape-as.html great prototype] of
  6 KB (917 words) - 22:00, 6 February 2013
• Mini-Mendel/Spacexula Documented Build
  There are six stages to making RepRap Beta "Mini Mendel". They are: # [[Installing RepRap on your computer|Downloading and Installing RepRap on your computer]]
  650 bytes (92 words) - 04:23, 26 November 2011
• Mini Mendel Mechanical construction
  ...you how to build the mechanical structure of [[Mini-Mendel]], based on the RepRap Version II "Mendel". Check out the [[Mendel Overview|overview]] to get a fa
  1 KB (152 words) - 17:37, 24 November 2011
• Parametric Involute Bevel and Spur Gears
  |reprap = ?
  1 KB (175 words) - 07:11, 2 January 2015
• Pen Holder
  |reprap = ...ed to draw circuit boards with an etch resistant pen and is printable on a RepRap. Besides the RP parts all that is needed to operate it is a rubber band whi
  1 KB (221 words) - 23:20, 13 February 2024
• Mendel Multiple Extruder
  |reprap = Mendel The latest files may be found [http://reprap.svn.sourceforge.net/viewvc/reprap/trunk/users/Rhys/Multi%20Head%20Bowden%20Carriage/ here].
  3 KB (506 words) - 21:12, 9 November 2010
• Alternative Build Documentation
  ''(And how exactly is that different from [[RepRap Options]]?)(This effort predated the creation of that page)'' [[Category:RepRap machines]]
  830 bytes (133 words) - 17:57, 7 March 2019
• RepRap Breeder
  |name = RepRap Breeder |reprap = ?
  6 KB (942 words) - 13:56, 22 October 2013
• Plotting
  |description = Plotting drawings on flat surfaces with RepRap, like plotting on paper or printed circuit boards. |author = RepRap dev team
  19 KB (3,296 words) - 23:22, 13 February 2024
• Filament Spindle
  |reprap = Mendel ...agement solution. Hopefully bringing an end to tangled messes and [http://reprap.org/wiki/ManagingYourFilament bizarre hanging contraptions]!
  6 KB (827 words) - 02:59, 3 August 2010
• Pololu Extruder Stripboard
  |reprap = Mendel ...ard mounted [[Pololu stepper driver board]] and connect it to the existing RepRap electronics in order to bypass the noisy inefficient 2 H-bridge hack on the
  3 KB (444 words) - 07:34, 10 January 2015
• Basic Sewing Machine
  |reprap = ? [[Image:20px-Exquisite-khelpcenter.png|frameless|right]][http://forums.reprap.org/feed.php?88,53045,53052 Forum/Mailing List]</h2>
  1,021 bytes (140 words) - 15:48, 3 March 2012
• Mendel Power Bracket
  |reprap = Mendel
  1 KB (192 words) - 19:09, 26 July 2010
• Parameterized Mendel
  |reprap = Mendel
  480 bytes (56 words) - 19:13, 26 July 2010
• Scratchbuilt Piezo Printhead
  |reprap = Sui Generis |url = http://forums.reprap.org/read.php?153,52959
  12 KB (1,984 words) - 05:50, 8 September 2013
• Scanning Spindle
  |reprap = Mendel ...de extruder to do very slow turns. Would be connected and controlled from RepRap firmware as if it were another extruder. Possibly use a MAX endstop port f
  1 KB (189 words) - 08:17, 2 January 2015
• Generation 6 Electronics
  |reprap = ATMEGA644 ...ard solution, so you don't need all those cables and one thick sheet and 4 reprap parts less.
  26 KB (4,199 words) - 20:05, 15 March 2018
• Conductor de Extrusor Adaptado Nema17
  |reprap = Mendel |cadModel = [http://reprap.svn.sourceforge.net/viewvc/reprap/trunk/mendel/mechanics/solid-models/extruders/geared-pinch-wheel/ cad files
  18 KB (2,951 words) - 22:02, 7 October 2012
• Generation 3 Electronics/Tech Zone Remix/Instalacion en Espanol
  ...conectados pos don alambres, en la mayoría de la implementación moderna RepRap, pero el diseño original solo usa RS485, y pide un motor de velocidad vari ...thermocouple is connected with the correct polarity. To do this, load the RepRap host software and go to the extruder tab. It should be providing you with a
  18 KB (3,071 words) - 00:15, 11 September 2012
• NYC Maker Faire
  * Tony Buser and wife Amy - will bring either MakerBot or RepRap not sure which yet, also a [[Filament Spindle]] Post in the [[http://lists.reprap.org/pipermail/nyc-makerfaire/ RepRap NYC-Maker Faire mailing list] or the forum to try and coordinate a carpool.
  3 KB (487 words) - 17:33, 24 November 2011
• Inbetriebnahme
  Hinweis: Dies ist eine Übersetzung der englischen Seite http://objects.reprap.org/wiki/Commissioning. ...e des Motherboards musst Du die Datei configuration.h anpassen, damit Dein RepRap/RepStrap korrekt arbeitet.
  2 KB (271 words) - 06:31, 26 November 2011
• Die RepRap-Elektronik Testen
  {{Languages | Testing RepRap Electronics}} Diese Seite beschreibt, wie alle von RepRap verwendeten Platinen ohne die Mechanik getestet werden, bevor sie an der Ma
  9 KB (1,496 words) - 06:38, 31 July 2014
• Testing RepRap Electronics/de
  #REDIRECT [[Die RepRap-Elektronik Testen]]
  42 bytes (4 words) - 06:34, 31 July 2014
• Mendel USB and power connector/de
  Hinweis: Dies ''wird'' eine Übersetzung der englischen Seite http://objects.reprap.org/wiki/Mendel_USB_and_power_connector. ...beschreibt, wie die Stromversorgung und die USB-Verbindung-vom-Computer am RepRap Version II "Mendel" angeschlossen werden.
  6 KB (891 words) - 14:16, 6 December 2011
• Optischer Grenztaster 2.1
  ...ks muss jede Achse zurückfahren, bis der Referenzpunkt erreicht ist. Für RepRap verwenden wir einen Opto-Schalter für jede Achse, um ihre Position zu defi Du brauchst '''3* (drei) davon für eine einfache RepRap-Maschine, und *6''' (sechs) Stück für eine vollständige Maschine mit Gre
  15 KB (2,283 words) - 09:52, 14 December 2014
• PC-Netzteil
  Einige RepRap-Elektroniken sind geeignet, PC-Netzteile direkt und ohne Modifikation anzus Im RepRap-Forum gibt es eine Reihe [http://forums.reprap.org/read.php?13,121279 Erfahrungsberichte mit Netzteilen (englisch)]. Der 5
  19 KB (2,908 words) - 09:35, 30 December 2014
• 4 Axis TB6560 CNC Stepper Motor Driver Board Controller
  ''NOTE: This stepper driver board is HIGHLY experimental within the reprap community ( less than 3 known users, none 100% satisfied with their configu also in reprap firmware you need to make it non inverting enabled. reprap gen 3 is inverted for enabled. these electronics are non inverted for enabl
  9 KB (1,480 words) - 05:58, 29 November 2014
• Mendel Alternate X Motor Bracket
  |cadModel = [http://reprap.svn.sourceforge.net/viewvc/reprap/trunk/mendel/mechanics/solid-models/cartesian-robot-m4/printed-parts/altern |reprap = Mendel
  3 KB (418 words) - 13:01, 16 January 2011
• RepRapBreeding
  |name = A RepRap Breeding Program |reprap = Mendel
  3 KB (398 words) - 00:01, 29 November 2010
• Magnet joint
  Some early RepRap/RepStrap prototypes, such early [[Delta]] and [http://builders.reprap.org/search/label/tripod Viktor's tripod repstrap demonstrator],
  3 KB (396 words) - 11:00, 10 November 2013
• SAE Prusa Mendel
  |reprap = Mendel * http://blog.reprap.org/2010/10/story-of-simpler-mendel-pla-bushings.html
  13 KB (1,967 words) - 11:57, 9 November 2014
• PCB Heatbed
  |reprap = mendel/darwin/repstraps The heatbed is often the source of various problems in RepRap 3D printers. The following is a list of possible problems and how to correc
  27 KB (4,526 words) - 02:36, 20 February 2021
• Support Material
  While current RepRap implementations can print any arbitrary 2D shape on the first layer,
  2 KB (320 words) - 12:07, 27 October 2014
• Columbus
  |reprap = Sui Generis ...rency - as [http://forums.reprap.org/read.php?171,36476 interpreted by the RepRap Core Team and others] - all documentation for this project will take place
  16 KB (2,554 words) - 02:35, 24 October 2015
• TechZone Thermocouple Firmware
  [[Category:TechZone RepRap machines]]
  1 KB (210 words) - 07:04, 18 July 2015
• Tweezers
  |reprap = Sui Generis For more details see the blog post [http://blog.reprap.org/2010/08/siliconepla-tweezers.html here]
  1 KB (188 words) - 10:20, 15 December 2010
• RUG/Hong Kong
  [[Image:20px-Exquisite-khelpcenter.png|frameless|right]][http://forums.reprap.org/feed.php?204 Forum/Mailing List]</h2> |feedurl=http://forums.reprap.org/feed.php?204,replies=1,type=rss
  2 KB (352 words) - 09:04, 8 July 2014
• RUG/Missouri/Saint Louis
  [[Image:20px-Exquisite-khelpcenter.png|frameless|right]][http://forums.reprap.org/feed.php?31 Forum/Mailing List]</h2> |feedurl=http://forums.reprap.org/feed.php?31,replies=1,type=rss
  2 KB (359 words) - 09:04, 8 July 2014
• SAE Mendel
  |reprap = Mendel = Imperial Reprap SAE =
  3 KB (499 words) - 11:50, 22 March 2013
• Robot arm
  |reprap = Sui Generis |url = http://reprap.org/wiki/robot_arm
  3 KB (566 words) - 07:39, 8 September 2013
• Arduino Mega
  ...Mega, clones, and derivatives are being used with the generally peer-used RepRap [[Arduino Mega Pololu Shield]] (RAMPS) cape (add on board)
  3 KB (416 words) - 11:25, 25 July 2017
• Makerbot
  Their first version, used the RepRap [[Generation_3_Electronics]]. ''Not'' open sourced (''aka: [[Neutering a RepRap]]''):
  3 KB (373 words) - 02:10, 17 October 2016
• RUG/NYC
  [[Image:20px-Exquisite-khelpcenter.png|frameless|right]][http://forums.reprap.org/feed.php?28 Forum/Mailing List]</h2> |feedurl=http://forums.reprap.org/feed.php?28,replies=1,type=rss
  2 KB (353 words) - 09:04, 8 July 2014
• Heated WolfBed/de
  |reprap = Sui Generis http://forums.reprap.org/read.php?35,50018,page=1
  5 KB (716 words) - 09:22, 7 August 2013
• NewHost Skeinforge
  It is for the new RepRap-Host reprap-mendel-20100806.zip 63.0 MB 2010-08-06
  1 KB (163 words) - 06:37, 11 January 2015
• RUG/Greece
  [[Image:20px-Exquisite-khelpcenter.png|frameless|right]][http://forums.reprap.org/feed.php?206 Forum/Mailing List]</h2> |feedurl=http://forums.reprap.org/feed.php?206,replies=1,type=rss
  2 KB (351 words) - 09:05, 8 July 2014
• Darwin Upgrades
  |reprap = Darwin
  2 KB (220 words) - 01:39, 25 September 2010
• Cubic Meter Bot
  |description = A new metal RepRap |reprap = Sui Generis
  3 KB (449 words) - 12:26, 21 March 2014
• Builders/Config/Config Axes/de
  Diese Prozedur setzt voraus, dass Du einen getesteten und funktionierenden RepRap hast (siehe [[Builders/Config/Start]])
  2 KB (296 words) - 18:06, 28 November 2014
• Builders/Config/Getting Started/de
  ...ache einen Pre-Flight-Check. Kontrolliere alle Gelenke und Mechanismen des RepRap, achte darauf, ob irgendetwas gebrochen oder an der falsche Stelle ist. Sch ...er die GCode-Firmware hinein. Schließe die Arduino-Software, bevor Du die RepRap Host-Software startest.
  5 KB (781 words) - 18:07, 28 November 2014
• Mendel User Manual: Bed
  If the bed of your RepRap machine isn't maintained flat and parallel with the movement of the extrude This video shows how to prepare a tray for RepRap printing on a [[Mendel_heated_bed|heated bed]] and to maintain its flatness
  592 bytes (101 words) - 23:25, 13 February 2024
• RepRapUnion
  =What is a RepRap Union?= ...he had printed and sold had not been assembled, or much less replicating. RepRap bank is concerned with speeding replication.
  2 KB (283 words) - 16:58, 24 November 2011
• SpaceXULAUnion
  ...Union]] provides Mini Mendels for those groups that promise to help spread RepRap, or Wades Extruders and Prinstruders for those groups that have a RepStrap, -You must promise to form a bank once you have an operating RepRap.
  2 KB (254 words) - 16:37, 24 November 2011
• Java Software Preferences File/de
  ...rweise die Parameter Deiner Software einstellen. Um das zu tun, starte die RepRap Software und klicke auf die purpurfarbene Schaltfläche Preferences (Einste Wenn Du die RepRap Software ausführst, erstellt sie Dir eine lokale Kopie der mitgelieferten
  30 KB (4,700 words) - 15:25, 26 November 2011
• Mendel User Manual: Host Software/de
  ...zudruckenden Teile lädst und die daraus die Dateien erzeugt, die zu einer RepRap Maschine gesendet werden. # Laden der auszudruckenden Teile, Erzeugen der RepRap G-Code Anweisungen aus ihnen, und Speichern dieser G-Codes in einer Datei.
  27 KB (4,531 words) - 23:28, 13 February 2024
• Mendel/Parts
  = RepRap Printed Parts =
  14 KB (1,861 words) - 15:09, 25 November 2011
• SuperSkein
  |reprap = Skeinforge
  2 KB (259 words) - 16:30, 19 August 2010
• Brutis
  |reprap = Mini-Mendel [[Image:20px-Exquisite-khelpcenter.png|frameless|right]][http://forums.reprap.org/feed.php?152,52823 Forum/Mailing List]</h2>
  4 KB (541 words) - 12:01, 30 December 2012
• Prusa Mendel
  |reprap = Mendel * http://blog.reprap.org/2010/10/story-of-simpler-mendel-pla-bushings.html
  8 KB (1,134 words) - 18:28, 10 January 2019
• Mini-Mendel X-axis
  |reprap = Huxley
  6 KB (959 words) - 17:37, 24 November 2011
• Mini-Mendel Z-axis
  |reprap = Huxley
  710 bytes (94 words) - 17:38, 24 November 2011
• Mendel 3D-Modelle
  ...ndels, die möglicherweise "offiziell" genannt werden kann, sofern es beim RepRap überhaupt sowas gibt. ...gbar als 'cartesian-robot-m4' [https://reprap.svn.sourceforge.net/svnroot/reprap/trunk/mendel/mechanics/solid-models hier]. Es wird der komplette 'cartesian
  3 KB (411 words) - 15:11, 25 November 2011
• Mendel Montagedatenblatt
  Das neue Datenblatt lädt man [http://objects.reprap.org/wiki/media:Mendel-m4-assembly-data-sheet.ods‎ hier] hoch. Und, im Namen der RepRap-Community - Danke ;-)
  2 KB (265 words) - 15:12, 25 November 2011
• RUG/Korea
  [[Image:20px-Exquisite-khelpcenter.png|frameless|right]][http://forums.reprap.org/feed.php?207 Forum/Mailing List]</h2> |feedurl=http://forums.reprap.org/feed.php?207,replies=1,type=rss
  3 KB (363 words) - 09:05, 8 July 2014
• RUG/Canada/Calgary
  [[Image:20px-Exquisite-khelpcenter.png|frameless|right]][http://forums.reprap.org/feed.php?208 Forum/Mailing List]</h2> |feedurl=http://forums.reprap.org/feed.php?208,replies=1,type=rss
  3 KB (380 words) - 14:17, 25 November 2015
• X Axis Enhanced
  |reprap =
  1 KB (179 words) - 04:59, 24 August 2010
• MetalicaRap
  |reprap = Sui Generis [[Image:20px-Exquisite-khelpcenter.png|frameless|right]][http://forums.reprap.org/feed.php?215 Forum/Mailing List]</h2>
  168 KB (26,821 words) - 07:28, 3 July 2023
• Holliger
  |reprap = Huxley | Controller Electronics||Any controller compatible with [[RepRap Interface Standard]] RIS 1.
  4 KB (623 words) - 23:30, 1 February 2024
• CRAMPS2.1
  |reprap = RAMPS-FD
  11 KB (1,800 words) - 11:48, 1 December 2014
• TechZone Tip Assembly
  ...ard way, that the tip is probably the hardest and most finicky part in the RepRap. Unfortunately that set us up to cause a lot of problems for many of you (o ...a piece of cake to make and deliver hot ends, after all, everyone with a RepRap has a hot end and we presumed that they worked just fine. In the weeks (whi
  17 KB (3,114 words) - 04:25, 17 December 2011
• Glass Nozzles
  |reprap = Sui Generis One of the most frequently described failure modes for a working reprap is an extruder failure. This often occurs because the brass nozzle works lo
  14 KB (2,545 words) - 18:09, 29 December 2013
• RevarBed
  |reprap = Belfry Fabber Mk1
  3 KB (451 words) - 04:51, 9 September 2010
• ORE-Bot
  |reprap = Sui Generis ==ORE-Bot as RepRap==
  3 KB (512 words) - 23:32, 13 February 2024
• Tower-Bot
  |reprap = ? [[Image:20px-Exquisite-khelpcenter.png|frameless|right]][http://forums.reprap.org/feed.php?31 Forum/Mailing List]</h2>
  7 KB (1,196 words) - 18:40, 31 August 2010
• TRap
  |reprap = Sui Generis The TRap will be an alternate mechanical structure for the reprap project. Team TRap intends to make it an entry in the [http://www.foresig
  10 KB (1,579 words) - 00:37, 13 December 2010
• Ship of Theseus
  |description = RepRap context and design principals |reprap = Sui Generis
  2 KB (314 words) - 17:38, 6 January 2015
• Materials
  ...is to brainstorm new materials that are better for making (some part of) a RepRap -- cheaper, easier to work, easier to acquire, or "better" in some other wa ...Lead-free_solder Lead-free solder] melts around 215&deg;C, well within the RepRap hotend temperatures. [http://en.wikipedia.org/wiki/Solder#Hard_solder Hard
  12 KB (1,866 words) - 22:17, 12 December 2014
• Easy Reliable Coupler
  |reprap = Sui Generis
  2 KB (253 words) - 00:12, 2 December 2010
• TRap workbook 2010 September
  * Registered team on the RepRap wiki Image:u-joint.jpg|TRap Concept 3: Reprap-able Universal Joint for Delta-Style Manipulator.
  2 KB (380 words) - 13:36, 6 November 2010
• Mendel Introduction Redraft
  {{RepRap|name=Mendel|version=II|image=mendel.jpg|description= ...ki/Gregor_Mendel father of genetics]. It's the second, improved version of RepRap: small enough to fit on your desk, but with a print volume large enough for
  4 KB (600 words) - 23:33, 13 February 2024
• Brutstruder
  |reprap = Makerbot ...http://www.thingiverse.com/thing:4042 smaller version 2]), and uploaded to RepRap
  2 KB (281 words) - 00:36, 22 July 2014
• Electronics Naming Conventions
  RepRap tends to use chipname-color-foodstuff nomenclature when the developer in qu ...ctronics releases with a standard naming convention that is similar to how RepRap's are named. As this is written (09-06-2010) the current standard is "Gene
  4 KB (526 words) - 10:33, 14 January 2019
• Generation 8 Electronics
  |reprap = Sui Generis
  11 KB (1,901 words) - 10:30, 10 June 2017
• WormBot-Deutsch
  |description = Ein RepRap! |reprap = Sui Generis
  2 KB (342 words) - 17:51, 26 November 2011
• Bearing clip 01
  |reprap =
  2 KB (328 words) - 18:28, 29 August 2015
• File deletion policy
  ...pload virtually any files to the RepRap site that have any connection with RepRap including, but not limited to, files for parts of the machine and files for
  884 bytes (159 words) - 21:23, 27 December 2014
• B&TRap
  |reprap = Sui Generis ...there is a good chance that a lightweight printer head (as started in the RepRap II models) could allow high accuracy, too. When the print model is lightwei
  6 KB (893 words) - 21:26, 2 November 2015
• PCB Milling
  ...= Collection of software helpful for milling PCBs and their application to RepRap |reprap =
  38 KB (6,028 words) - 23:58, 25 May 2020
• A4983 Breakout Board
  RepRap electronics using the Pololu A4983 breakout board Nevertheless, a few brave souls design RepRap electronics using the bare A4983 chip without a breakout board:
  2 KB (326 words) - 06:30, 29 November 2014
• Alt Select Mechanics
  <tr><th>Pic</th><th>Name</th><th>Author</th><th>License</th><th>% RepRap-able</th><th>Comment</th><th>Purchase Kit</th><th>Est. Material Cost</th></ ...Modeled After</th><th>Base Material</th><th>Targeted Manf Method</th><th>% RepRap-able</th><th>Comment</th><th>Purchase Kit</th><th>Est. Material Cost</th></
  3 KB (559 words) - 18:01, 7 March 2019
• Mendel/bg
  4 KB (56 words) - 18:46, 28 November 2014
• Reproid
  |description = Reprap running on an android app |reprap = Mendel
  3 KB (540 words) - 21:24, 22 January 2014
• Teacup Firmware
  ...guinololu]], [[Generation 3 Electronics]], [[NanoHeart]] and for all other RepRap controllers it should be a matter of adjusting the pin mapping to get it ru == [http://forums.reprap.org/read.php?147,33082 Recent Discussion] ==
  50 KB (8,031 words) - 02:50, 4 November 2017
• Better Granular Extruder
  |reprap = == RepRap Research/Writeups ==
  354 bytes (34 words) - 09:46, 19 September 2013
• Reprap-Dev-Guidelines
  Welcome to reprap-dev, RepRap's officially technical-but-friendly http://lists.reprap.org/pipermail/reprap-users/
  4 KB (625 words) - 12:49, 6 December 2011
• Reprap-Users-Guidelines
  Guidelines for reprap-users@lists.reprap.org Reprap-users is for the discussion of the construction and use of
  2 KB (268 words) - 12:49, 6 December 2011
• R2C2 RepRap Electronics
  |name = R2C2 RepRap Electronics |description = New cutting edge electronic board for RepRap 3D printers
  9 KB (1,401 words) - 01:30, 9 October 2017
• M115 Keywords
  FIRMWARE_URL:http%3A//reprap.org It represents the protocol version betwen Reprap host and Reprap
  3 KB (479 words) - 15:46, 4 January 2015
• Optical encoders 01
  |reprap =
  5 KB (946 words) - 20:58, 11 October 2010
• Columbus/workbook
  ...rency - as [http://forums.reprap.org/read.php?171,36476 interpreted by the RepRap Core Team and others] - all documentation for this project will take place ...in the [[Talk:Columbus|Columbus discussion page]] or in our [http://forums.reprap.org/read.php?171,54826 official forum].
  10 KB (1,548 words) - 13:51, 25 November 2011
• Mantis 9.1
  |reprap = Sui Generis
  1 KB (170 words) - 07:06, 8 September 2014
• Mini-Mendel Buyers Guide
  {{Languages|RepRap}} ...eets, Kapton tape&film, extruder parts, stepper motors, SLS printed parts, reprap plastics on pre-order.
  514 bytes (73 words) - 11:55, 30 December 2012
• Ultimaker
  ...o be found on the Ultimaker Wiki. So documentation can now be done on this RepRap wiki. * https://www.reprap.me/ad597-k-type-thermocouple-sensor-board.html
  12 KB (1,816 words) - 21:17, 14 October 2023
• Elegant multispline motion controller
  ...he following two sections should be worked into the 'print driver' for the reprap. The first section should be replaced by the *.cbml file. ...als are the results of a low pass filter. The low pass filter in the real Reprap is the nicrome wire or whatever is being heated. This is a very low pass f
  29 KB (4,689 words) - 15:45, 4 January 2015
• Heater Block For Glass Nozzle
  |reprap = Mendel
  7 KB (1,212 words) - 13:23, 8 January 2013
• RUG/New Jersey
  [[Image:20px-Exquisite-khelpcenter.png|frameless|right]][http://forums.reprap.org/feed.php?209 Forum/Mailing List]</h2> |feedurl=http://forums.reprap.org/feed.php?209,replies=1,type=rss
  6 KB (989 words) - 01:29, 20 April 2013
• Buyers guide
  #REDIRECT [[RepRap Buyers' Guide]]
  34 bytes (4 words) - 12:13, 14 December 2011
• Venders
  #REDIRECT [[RepRap Buyers' Guide]]
  34 bytes (4 words) - 12:13, 14 December 2011
• Francisco/es
  |reprap = [[Image: Reprap_c.jpg|left|thumb|Actual design of my Reprap]]
  5 KB (933 words) - 18:14, 27 December 2014
• Kits
  #REDIRECT [[RepRap Buyers' Guide]]
  34 bytes (4 words) - 12:13, 14 December 2011
• Portable USB Ubuntu RepRap Host
  |description = Allows the Host RepRap software to be run off a USB installation of Ubuntu |reprap = Mendel
  6 KB (1,018 words) - 17:19, 4 March 2012
• Columbus/test
  |reprap = Sui Generis |url = [http://forums.reprap.org/read.php?171,54826 Team Columbus Forum]
  4 KB (628 words) - 03:45, 8 November 2010
• Mechanical Endstop
  ...pe of [[endstop]]: a simple mechanical switch positioned to trigger when a RepRap's axis reaches the end/start of its motion. RepRap's Cartesian printers and many other 3D printers all move the printer head (
  15 KB (2,467 words) - 12:25, 5 April 2021
• Инсталиране на софтуера РепРап
  2 KB (106 words) - 18:40, 15 December 2011
• 32 Generation X 1 Electronics
  |reprap = Sui Generis Here we discuss driving a RepRap with an Atmel AVR32,
  11 KB (1,809 words) - 10:04, 26 November 2011
• RUG/India
  [[Image:20px-Exquisite-khelpcenter.png|frameless|right]][http://forums.reprap.org/feed.php?136 Forum/Mailing List]</h2> |feedurl=http://forums.reprap.org/feed.php?136,replies=1,type=rss
  4 KB (535 words) - 09:24, 30 June 2021
• RUG/Australia/Melbourne
  [[Image:20px-Exquisite-khelpcenter.png|frameless|right]][http://forums.reprap.org/list.php?129 Forum/Mailing List]</h2> |feedurl=http://forums.reprap.org/feed.php?129,replies=1,type=rss
  9 KB (1,462 words) - 07:20, 28 August 2019
• Example
  |reprap = Sui Generis
  2 KB (337 words) - 14:39, 11 October 2014
• RUG/Australia/Adelaide
  ...no RUG in Adelaide. In fact as far as I know, I (Greg Frost) have the only RepRap in Adelaide. Tell me if I am wrong, or if you are interested in getting inv
  592 bytes (113 words) - 01:38, 17 September 2013
• Helium Frog Delta Robot
  |reprap = Sui Generis |categories = {{tag|RepRap machines}} [[:Category:Delta|Delta]] [[Category:Delta]]
  3 KB (429 words) - 11:15, 6 February 2015
• Mendel On Darwin
  |reprap = Sui Generis
  3 KB (434 words) - 18:01, 27 February 2011
• RedBot
  |reprap = Sui Generis The RedBot RepStrap looks very similar to the [[Columbus]] RepRap.
  5 KB (907 words) - 00:37, 12 March 2021
• WatBot
  |reprap = Sui Generis Software-side, it looks like [[EMC]] or any RepRap software will work --
  4 KB (579 words) - 11:59, 6 October 2013
• Monotronics
  |reprap = Generation 3 Electronics The RepRap Monolithic Electronics set (or Monotronics) is based upon the Generation 3
  28 KB (4,657 words) - 00:10, 5 August 2015
• Strapzilla
  |reprap = Sui Generis
  3 KB (356 words) - 22:14, 27 October 2010
• T-Slot
  We feel that the desire to self replicate has been holding back the RepRap device from gaining wider acceptance and also attaining higher performance
  5 KB (681 words) - 06:17, 26 November 2019
• Arcol.hu Hot-End Version 3.0
  |reprap = Sui Generis |cadModel = [http://reprap.org/mediawiki/images/c/cb/Arcol.hu_hot-end_v3.0.dxf.bz2 Arcol.hu_hot-end_v3
  9 KB (1,419 words) - 23:38, 13 February 2024
• RStep
  |reprap = Sui Generis There is no reason it can't be used with the reprap arudino software. It still needs some testing, and I'm looking for a parter
  2 KB (240 words) - 06:27, 29 November 2014
• A3979breakout
  |reprap =
  770 bytes (112 words) - 06:11, 29 November 2014
• Belt
  RepRap attempts to print its own parts wherever possible, including toothed drive Some people avoid using any belts in their RepRap
  3 KB (441 words) - 17:47, 20 January 2020
• UBW32 Blue Banana Electronics
  |description = RepRap Electronics based on PIC32MX460F512L |reprap = Sui Generis
  3 KB (505 words) - 01:19, 14 November 2010
• MiRUG
  Michigan RepRap Users Group http://groups.google.com/group/reprap-michigan
  898 bytes (146 words) - 03:09, 7 May 2012
• Build a RepRap
  {{Languages|Build a RepRap}} ...e. This page attempts to help people wanting to know more about building a RepRap.
  4 KB (561 words) - 11:58, 4 May 2024
• Ouming Packaging
  Spammer. Not related to reprap
  30 bytes (5 words) - 00:19, 20 August 2019
• RepRap Options
  #REDIRECT [[Build a RepRap]]
  28 bytes (4 words) - 02:57, 23 February 2024
• RepRapMicron
  |name = μReprap (RepRapMicron) |reprap = μReprap
  13 KB (2,073 words) - 02:46, 4 May 2024
• Scanz
  ...on end effector (proper term for extruder) can be made without access to a RepRap, 3D printer etc, but a simple drill press. The Electronics are Gen 3 MakerBot running RepRap firmware, thus I running RepRap host software. Reason for this is to support the open source movement. At
  4 KB (636 words) - 09:18, 7 August 2013
• Изработване на РепРап електроника
  ...по-подходяща конкретно за вашия модел на RepRap да ползвате такава. ...за изработване на Дънна платка v1.2 ([http://www.reprap.org/wiki/Motherboard_1_2 Motherboard v1.2]):<br />
  6 KB (200 words) - 18:38, 15 December 2011
• FabPod
  |reprap = New Design *After getting basic printing ability up to par with current RepRap quality levels, then move onto new feature development:
  6 KB (977 words) - 08:14, 8 September 2013
• Buckrap Hot End Bow
  |reprap = Sui Generis
  5 KB (878 words) - 00:37, 22 July 2014
• Parallel extruder
  excuse me for being incoherent,i've put off assembling my reprap until christmas break so it doesn't cut into schoolwork, so i have an acade
  2 KB (332 words) - 09:25, 24 September 2013
• Doboz
  |reprap = Mendel http://forums.reprap.org/read.php?152,65655
  4 KB (558 words) - 05:05, 8 September 2013
• Troubleshooting
  In the meantime... See also: [[The incomplete reprap beginner%27s guide]]. Links to troubleshooting information for reprap.org information on a specific device, part, machine, etc. Specifically, the
  9 KB (1,431 words) - 17:55, 26 December 2015
• RepRap Intro Development
  {{Languages|RepRap Intro}} {{RepRapNavigation|name=RepRap Intro}}
  177 bytes (18 words) - 17:47, 6 August 2015
• Fused filament fabrication
  ...he term fused filament fabrication (FFF), was coined by the members of the RepRap project to provide a phrase that would be legally unconstrained in its use. * [http://blog.reprap.org/2011/06/new-approach-to-printing-metals.html Low melting point metals]
  2 KB (290 words) - 08:21, 28 February 2019
• Mindel
  #redirect [[Integrated Parametric RepRap]]
  42 bytes (4 words) - 04:22, 26 November 2011
• Integrated Parametric RepRap
  |name = Integrated Parametric RepRap |reprap = Mendel
  4 KB (592 words) - 01:32, 7 August 2011
• RUG/UK/Southampton
  [[Image:20px-Exquisite-khelpcenter.png|frameless|right]][http://forums.reprap.org/feed.php?211 Forum/Mailing List]</h2> |feedurl=http://forums.reprap.org/feed.php?211,replies=1,type=rss
  4 KB (571 words) - 03:17, 7 May 2012
• RUG/UK/Devon
  [[Image:20px-Exquisite-khelpcenter.png|frameless|right]][http://forums.reprap.org/feed.php?212 Forum/Mailing List]</h2> |feedurl=http://forums.reprap.org/feed.php?212,replies=1,type=rss
  2 KB (351 words) - 03:17, 7 May 2012
• RUG/Idaho
  [[Image:20px-Exquisite-khelpcenter.png|frameless|right]][http://forums.reprap.org/feed.php?213 Forum/Mailing List]</h2> |feedurl=http://forums.reprap.org/feed.php?213,replies=1,type=rss
  4 KB (608 words) - 19:16, 23 October 2013
• DingBot
  |reprap = Sui Generis
  2 KB (297 words) - 10:30, 26 November 2011
• Valkyrie Redux
  |reprap = http://letsmakerobots.com/node/9006
  1 KB (167 words) - 06:03, 29 November 2014
• SAE All-Metal Hot End
  |reprap = Sui Generis
  5 KB (805 words) - 22:41, 27 November 2010
• Herringbone Extruder Driver
  |reprap = Mendel |url = [http://reprap.svn.sourceforge.net/viewvc/reprap/trunk/users/Rhys/Herringbone%20Extruder%20Driver/]
  3 KB (558 words) - 09:32, 5 November 2016
• Repic
  |reprap = Mendel ...o are familiar with Visual Studio Express and want to play around with the RepRap firmware within that environment using a minimal set of hardware.
  16 KB (2,557 words) - 23:14, 5 November 2022
• Granite Host
  |reprap = ReplicatorG, RepRap Host, RepRap Utilities by Ralith
  3 KB (405 words) - 04:05, 20 November 2010
• Granite Protocol A
  |reprap = G-code ...r configuration. It is stage one of the three stage gradual improvement on RepRap to host communications.
  2 KB (305 words) - 06:36, 11 January 2015
• Tri Duino Stepper
  |reprap =
  2 KB (266 words) - 06:09, 29 November 2014
• Libreprap
  |description = a library intended to abstract host <-> reprap communication |reprap = Sui Generis
  948 bytes (140 words) - 21:00, 9 January 2011
• Rather Blue T-Slot Bot
  |reprap = Sui Generis
  3 KB (539 words) - 17:10, 17 December 2010
• Mendel Manuel Construction
  ...pages de ce site), c'est un wiki, et vous pouvez le faire en vous [http://reprap.org/mediawiki/index.php?title=Special:UserLogin&type=signup&returnto=Mendel Il y a six étapes pour construire la version II de la RepRap, appelée également "Mendel" :
  2 KB (306 words) - 05:40, 21 January 2012
• Ultimaker's v1.1 PCB
  |description = A 5 axis RepRap ArduinoMega Pololu Shield |reprap = RAMPS
  22 KB (3,651 words) - 09:21, 17 December 2011
• Mendel 中文
  {{RepRap|name=Mendel|version=II|image=mendel.jpg|description= 右邊這台是RepRap II印表機，我們命名為Mendel(孟德爾), 來紀念[http://en.wikiped
  1 KB (50 words) - 19:10, 28 November 2014
• RUG/Nigeria Port-Harcourt Rivers
  [[Image:20px-Exquisite-khelpcenter.png|frameless|right]][http://forums.reprap.org/feed.php?216 Forum/Mailing List]</h2> |feedurl=http://forums.reprap.org/feed.php?216,replies=1,type=rss
  2 KB (358 words) - 09:06, 8 July 2014
• ZornStrap
  |reprap = Sui Generis ...xtruder]] with a mendelparts v4 hot end (more or less identical to [http://reprap.org/wiki/Geared_extruder_nozzle this]). Heating is done with a resistor hea
  4 KB (616 words) - 19:02, 19 March 2014
• Auto-centering shaft coupler
  |reprap = Prusa Mendel * [https://github.com/hacklabto/Hacklab-RepRap/blob/master/coupling.scad Coupler OpenSCAD Source Code].
  1 KB (190 words) - 00:12, 2 December 2010
• Ultimaker's v1.3 PCB
  |description = A 5 axis RepRap ArduinoMega Pololu Shield |reprap = RAMPS
  2 KB (233 words) - 07:53, 17 December 2011
• Mendel/fr
  ...re de la génétique]. C'est le second projet, une version améliorée du RepRap : suffisamment petite pour tenir sur un bureau mais qui permet d'imprimer d | colspan="2" style="text-align:center;" | RepRap (ou n'importe qui d'autre...)
  4 KB (606 words) - 19:07, 28 November 2014
• RUG/California/Santa Monica and West LA
  [[Image:20px-Exquisite-khelpcenter.png|frameless|right]][http://forums.reprap.org/feed.php?217 Forum/Mailing List]</h2> |feedurl=http://forums.reprap.org/feed.php?217,replies=1,type=rss
  2 KB (350 words) - 09:06, 8 July 2014
• Box-Shaped T-Slot Bot Deutsch
  |reprap = Ultimaker
  2 KB (304 words) - 19:11, 4 December 2010
• Enemy Delta Robot
  |reprap = Sui Generis The aim is a cheap delta robot anyone can make with the reprap, laser or routing cutters.
  4 KB (712 words) - 11:24, 15 September 2013
• Механично сглобяване на РепРап
  ...мисля, че е крайно време да сглобим един RepRap Prusa i3:<br> [http://reprap.org/wiki/Prusa_i3 PrusaI3 RepRap]<br>
  2 KB (84 words) - 07:57, 7 March 2013
• RustyHuxley
  |reprap = Huxley This is a redesigned Huxley inspired by the [http://www.reprap.org/wiki/Prusa Prusa simplified Mendel].
  3 KB (501 words) - 21:14, 27 December 2010
• Gunstrap
  |reprap = Mantis_9.1
  4 KB (636 words) - 17:19, 22 December 2014
• RUG/Houston
  [[Image:20px-Exquisite-khelpcenter.png|frameless|right]][http://forums.reprap.org/feed.php?26 Forum/Mailing List]</h2> |feedurl=http://forums.reprap.org/feed.php?26,replies=1,type=rss
  2 KB (359 words) - 09:08, 8 July 2014
• Doubling time
  (The [http://blog.reprap.org/search/label/fast%20production "fast production"] tag has a few comment The [http://blog.reprap.org/2009/11/moving-towards-production.html "Moving towards production"] pos
  7 KB (1,157 words) - 13:54, 31 December 2015
• Reprappable-inkjet
  |description = An inkjet head that can be completely made in a RepRap machine |reprap = Scratchbuilt_Piezo_Printhead
  12 KB (2,112 words) - 23:40, 13 February 2024
• Making connections
  With care an IDC can be re-used at least 5 times for my reprap builds I've only used old PC serial cables by removing the IDC connector an
  2 KB (338 words) - 15:57, 16 January 2011
• MetalicaRap:Tool head processes discussion
  ...olid state lasers are extremely difficult) ( Adrian Bowyer" ''we may never reprap a laser''").
  14 KB (2,037 words) - 16:17, 26 May 2013
• RUG/Philippines
  [[Image:20px-Exquisite-khelpcenter.png|frameless|right]][http://forums.reprap.org/feed.php?220 Forum/Mailing List]</h2> |feedurl=http://forums.reprap.org/feed.php?220,replies=1,type=rss
  1,013 bytes (137 words) - 09:06, 8 July 2014
• Mister Probey
  |reprap = Sui Generis [[Image:20px-Exquisite-khelpcenter.png|frameless|right]][http://forums.reprap.org/feed.php?138,68792 Forum/Mailing List]</h2>
  3 KB (433 words) - 23:42, 22 December 2010
• IceRap
  |reprap = Reprappable-inkjet An IceRap could be considered any [[RepRap]] or [[RepStrap]] with the ability to print a 3D object made of Ice. <s> Th
  6 KB (1,033 words) - 05:23, 1 February 2015
• Grass Roots T-Slot Bot
  |reprap = Sui Generis
  2 KB (319 words) - 14:02, 26 December 2010
• WE-Bot
  |reprap = Sui Generis
  2 KB (341 words) - 15:54, 26 December 2010
• RUG/Czech Republic
  [[Image:20px-Exquisite-khelpcenter.png|frameless|right]][http://forums.reprap.org/feed.php?221 Forum/Mailing List]</h2> |feedurl=http://forums.reprap.org/feed.php?221,replies=1,type=rss
  6 KB (1,049 words) - 09:07, 8 July 2014
• RUG/Netherlands
  [[Image:20px-Exquisite-khelpcenter.png|frameless|right]][http://forums.reprap.org/feed.php?47 Forum/Mailing List]</h2> |feedurl=http://forums.reprap.org/feed.php?47,replies=1,type=rss
  2 KB (358 words) - 09:07, 8 July 2014
• Cantilevered Mendel
  |reprap = Mendel
  2 KB (341 words) - 03:22, 4 October 2013
• Trispatial
  |reprap = ...be used...". Similarly, I will also use a naming system much like [http://reprap.org/wiki/Columbus Columbus]
  5 KB (777 words) - 14:23, 14 December 2014
• HuxleyFrame
  This page and its peers should guide you through assembling a RepRap Huxley from the TechZone kit, or from parts you have printed which are the
  13 KB (2,353 words) - 15:05, 25 November 2011
• HuxleyXAxis
  This page and its peers should guide you through assembling a RepRap Huxley from the TechZone kit, or from parts you have printed which are the
  17 KB (2,995 words) - 15:06, 25 November 2011
• TechZoneHuxley
  This page and its sub pages should guide you through assembling a RepRap Huxley from the TechZone kit, or from parts you have printed which are the
  7 KB (1,209 words) - 10:15, 18 December 2011
• Avery
  ...m! If you are interested, contact me. I need someone with experiences with RepRap.''' |description = Printing & Milling RepRap
  1 KB (173 words) - 10:19, 26 November 2011
• HuxleyYAxis
  This page and its peers should guide you through assembling a RepRap Huxley from the TechZone kit, or from parts you have printed which are the
  5 KB (842 words) - 15:06, 25 November 2011
• Malthus
  |reprap = [[Mendel]], [[Prusa]] |cadModel = [https://github.com/hacklabto/Hacklab-RepRap openscad (git)]
  3 KB (494 words) - 10:32, 17 June 2016
• Bright Light Circuit
  |reprap = Sui Generis ...W of heat energy seems like it will be far too heavy to mount on a moving RepRap tool head -- is there a better way?
  5 KB (696 words) - 11:54, 28 December 2010
• Rap@Home
  |reprap = Makerbot Cupcake & Cornell Fab@Home ...size, resolution, profile, and software. It was decided that MakerBot and RepRap use the best (cheapest and most flexible) control system, while Fab@Home ha
  17 KB (2,929 words) - 06:33, 13 September 2013
• Harvester
  |reprap = Carapace-Copier ...eit]]. Feedback, discussion and other constructive input from those on the RepRap forum will be most welcome.
  15 KB (2,423 words) - 08:15, 2 January 2015
• LogFab
  |description = documenting a RepRap |reprap = Sui Generis
  5 KB (792 words) - 20:57, 2 January 2011
• Rhombot
  |description = Self-printable RepRap |reprap =
  3 KB (411 words) - 13:00, 2 June 2016
• Extruder development
  http://reprap.org/pipermail/reprap-dev/ *Follows in reprap principles
  3 KB (430 words) - 16:02, 19 January 2015
• RUG/Atlanta
  [[Image:20px-Exquisite-khelpcenter.png|frameless|right]][http://forums.reprap.org/feed.php?121 Forum/Mailing List]</h2> |feedurl=http://forums.reprap.org/feed.php?121,replies=1,type=rss
  2 KB (239 words) - 11:23, 24 November 2011
• Let's have fun sprechen und chatten Partei
  Das Wiki ist nur ein großartiger Ort, um über Reprap Chat. (This wiki page is just a great place to chat about reprap.)
  230 bytes (36 words) - 11:43, 24 November 2011
• RepRap Universal Mini Extruder
  |name = RepRap Universal Mini Extruder |cadModel = [https://github.com/reprap/huxley/tree/master/OpenSCAD-huxley available here]
  35 KB (6,039 words) - 14:07, 22 November 2015
• Exquisite Automated Build Platform
  |reprap = Sui Generis background. this has been talked about for some time on the reprap forum, although i would like credit for implementing this version, prior cr
  11 KB (1,993 words) - 03:18, 14 February 2024
• Ideas to place
  Got an idea for RepRap that you haven't had the time to get off the ground? Add it to the list! The RepRap Team is considering the option of participating in Google Summer of Code (G
  13 KB (2,043 words) - 14:27, 14 February 2015
• RepRap project FAQ/de
  {{Languages|RepRap project FAQ}} Team [[RUG/Germany|reprap-dev deutsch]] is just getting started translating this into [[:Category:Deu
  28 KB (4,384 words) - 07:40, 23 November 2013
• Official
  ...More fun this way. Dunno what an "[[:Category:Files Missing|unofficial]]" reprap would look like, anyway. --[[User:Sebastien Bailard|Sebastien Bailard]] 08:
  328 bytes (44 words) - 04:26, 26 November 2011
• Faden Alu Box
  |reprap = Sui Generis
  3 KB (488 words) - 16:10, 12 January 2011
• Auzze's One Piece Hot End
  |reprap = Sui Generis
  562 bytes (89 words) - 05:59, 14 June 2013
• Mailing Lists
  RepRap hosts a number of '''mailing lists'''. For some people it's very convenient ==== reprap-users ====
  6 KB (869 words) - 15:55, 12 September 2016
• HuxleyZAxis
  This page and its peers should guide you through assembling a RepRap Huxley from the TechZone kit, or from parts you have printed which are the
  11 KB (2,013 words) - 15:06, 25 November 2011
• HuxleyMotors
  This page and its peers should guide you through assembling a RepRap Huxley from the TechZone kit, or from parts you have printed which are the
  11 KB (1,884 words) - 15:06, 25 November 2011
• EMAKER Huxley
  |reprap = Huxley ...motors by using "two steppers wired in parallel to one driver"[http://blog.reprap.org/2010/10/story-of-simpler-mendel-y-and-z-axes.html]).
  5 KB (617 words) - 17:58, 2 April 2016
• Screwball-Bot
  |reprap = Sui Generis
  5 KB (821 words) - 12:16, 14 December 2014
• Dynamically expandable Bus Driven Approach
  ...build a multi axis making machine - It will probably not technically be a RepRap - as I plan to construct the frame from T section as others have done (RepS I have been made aware of a key difference between the RepRap style machines and the milling ones, the milling ones as well as having a m
  5 KB (911 words) - 13:51, 7 March 2013
• Syringe Pump Metal Extruder
  |reprap = There have been many RepRap-based projects on extruding low-temperature-melting alloys. This is one of
  8 KB (1,270 words) - 14:38, 22 January 2011
• Main Page gr
  #REDIRECT [[RepRap/el]]
  23 bytes (3 words) - 07:20, 26 November 2011
• RUG/Australia/Suppliers
  ...'indicative'' only, and should be checked for correctness before ordering. reprap ==Reprap/3D Specific Suppliers==
  28 KB (4,489 words) - 02:35, 26 May 2020
• Extruderinsulator
  The Original Reprap Mendel design:-
  1 KB (224 words) - 05:18, 17 December 2011
• PP3DP UP Printer
  This pages were written with the intention to help RepRap developers, on seeing how closed source [http://pp3dp.com/ PP3DP UP Printer ...pport material in a way that is very easy to remove, something not done on RepRap.
  3 KB (414 words) - 15:48, 4 January 2015
• YARD
  |name = Y.A.R.D (Yet Another RepRap Design) - Name Subject to Change.. |description = Documenting a new improved RepRap design by the team at RepRap-Shop.com
  2 KB (313 words) - 23:31, 2 February 2011
• Mixtape mendel
  |reprap = Mendel ...d has not reached a release package. Tagged releases will be posted to the reprap-dev mailing list.
  3 KB (456 words) - 21:28, 20 August 2011
• MendeLego
  |reprap = Mendel Other RepRap-related projects with LEGO:
  866 bytes (107 words) - 19:59, 17 January 2012
• LCD And Keypad for Generation 3
  |reprap = LCD+Keypad Control Panel for Makerbot [http://www.thingiverse.com/thing:2 ...3 Motherboard provides an SD card slot that has never been utilized by the RepRap firmware (the Makerbot firmware uses it to temporarily hold the gcode file
  4 KB (709 words) - 07:05, 10 January 2015
• OpenX
  |reprap = Mendel |url = http://forums.reprap.org/read.php?151,72304
  8 KB (1,446 words) - 08:48, 16 October 2013
• TechZone Horizontal Filament Spool
  This simple filament spool for your RepRap is designed to be inexpensive (both to buy and to ship as a kit) and durabl ...ol is a great addition to the [[TechZoneHuxley|TechZone Huxley]] or to the RepRap Mendel, it would of course work with any 3d printer which uses coiled filam
  12 KB (2,064 words) - 08:55, 30 December 2014
• Thermocouple vs Thermistor
  For more details see the following pages here for RepRap use of [[Thermistor]]s and [[Thermocouple]]s. There is abundant theory on
  2 KB (262 words) - 12:09, 29 March 2014
• PolyBot
  |reprap =
  2 KB (346 words) - 08:27, 8 September 2013
• Machine Issues
  = RepRap Mendel know problems/bugs = ...segment lines -- see [http://blog.reonarudo.info/ here] and [http://forums.reprap.org/read.php?151,71788 here].
  310 bytes (49 words) - 05:15, 26 November 2011
• Mendel Source Logs
  ...nd good sources for their RepRap. When you get done putting together your RepRap, call out your sources here, and give us a picture of your baby. Especiall =TianChang's 1st RepRap Mendel (Sells)=
  4 KB (669 words) - 16:55, 17 May 2011
• Материнская плата RepRap
  ...и показана плата сконфигурированная для RepRap. На второй картинке сконфигурированная д
  30 KB (4,692 words) - 12:19, 29 January 2012
• A5 Powder bed printer
  |reprap = ...weight: bold; padding: 0px; margin: 0px; padding: 5px 1em;">[http://forums.reprap.org/feed.php?153,71274 Forum/Mailing List]</h2>
  17 KB (2,832 words) - 13:29, 16 January 2015
• Ultimaker's v1.5.3 PCB
  |description = A 5 axis RepRap ArduinoMega Pololu Shield |reprap = RAMPS
  12 KB (1,920 words) - 09:25, 17 December 2011
• Laptop case
  [http://forums.reprap.org/read.php?88,12459 Reprap forums: "Print your own laptop"] * [http :// forums . reprap . org /read.php?164,122415 RepRap forums: "enclosure for a notebook mainboard"]
  799 bytes (107 words) - 08:02, 2 January 2015
• Laptoptasche
  [http://forums.reprap.org/read.php?88,12459 Reprap forums: "Print your own laptop"]
  751 bytes (99 words) - 04:25, 3 June 2013
• RepRap Prusa ITA
  == Che cos'è una RepRap Prusa == La RepRap Prusa è una stampante tridimensionale Affrordable ovvero facile da realizz
  10 KB (1,386 words) - 03:23, 14 February 2024
• OpenY
  |reprap = Mendel |url = http://forums.reprap.org/read.php?151,74650
  7 KB (1,340 words) - 21:56, 14 December 2012
• TZExtruderTip
  [[Category:TechZone RepRap machines]]
  2 KB (322 words) - 15:27, 20 March 2012
• RAMPS 1.2 old
  ...ino MEGA and holds interchangeable stepper driver carriers and the rest of RepRap's electronics. Arduino MEGA based modular RepRap electronics.
  10 KB (1,696 words) - 17:01, 5 April 2014
• RUG/Pennsylvania/State College/Printers/PSU Unit A
  ...pha was brought to the 2013 EXPO to be a sample printer to show how does a RepRap printer work. As the Fall 13 semester closes, we did not get to finish addi ...are not temperature related, please follow these guides to fix it [http://reprap.org/wiki/RUG/Pennsylvania/State_College/Trouble_Shooting_Guide Trouble Shoo
  2 KB (381 words) - 23:34, 30 April 2014
• DIY Direct hot end
  |reprap = Sui Generis ...makes it to act as a lever, as being subject to all the "giggling" of the reprap movements, inertia, moment forces etc (probably with original nichrome the
  30 KB (5,451 words) - 07:52, 6 April 2013
• RUG/Pennsylvania/State College/TechZone InfoHub
  .../reprap.org/wiki/RUG/Pennsylvania/State_College/Main Back to State College RepRap Main] *[http://www.reprap.org/wiki/File:TechZoneGen3ElectronicsSchematic.png TechZone Gen3 Electronic
  3 KB (419 words) - 13:37, 9 December 2013
• Sanguinololu
  |reprap=Pololu Electronics#Sanguinololu }}'''Sanguinololu''' is a low-cost all-in-one electronics solution for Reprap and other CNC devices. It features an onboard Sanguino clone using the ATme
  43 KB (6,616 words) - 20:02, 10 February 2024
• Smartrapcore
  |description = Easy to build, cheap and profesional quality reprap. |reprap = CoreXY
  2 KB (366 words) - 00:14, 12 August 2015
• RUG/New York Albany And Greater Capital District
  [[Image:20px-Exquisite-khelpcenter.png|frameless|right]][http://forums.reprap.org/feed.php?224 Forum/Mailing List]</h2> |feedurl=http://forums.reprap.org/feed.php?224,replies=1,type=rss
  3 KB (534 words) - 03:14, 7 May 2012
• RUG/Slovenia
  [[Image:20px-Exquisite-khelpcenter.png|frameless|right]][http://forums.reprap.org/feed.php?225 Forum/Mailing List]</h2> |feedurl=http://forums.reprap.org/feed.php?225,replies=1,type=rss
  2 KB (371 words) - 09:08, 8 July 2014
• RUG/Norway
  [[Image:20px-Exquisite-khelpcenter.png|frameless|right]][http://forums.reprap.org/feed.php?226 Forum/Mailing List]</h2> |feedurl=http://forums.reprap.org/feed.php?226,replies=1,type=rss
  2 KB (370 words) - 09:08, 8 July 2014
• Doboz-Web
  http://forums.reprap.org/read.php?156,75915,75933#msg-75933 * manual control of reprap via GCodes
  5 KB (756 words) - 17:19, 22 December 2014
• Clonedel
  |reprap = Prusa Mendel http://blog.reprap.org/2011/03/impartial-reivew-of-clonedel-cast-parts.html
  6 KB (1,056 words) - 14:58, 3 August 2011
• OpenDMLS
  |reprap = OpenSLS
  506 bytes (66 words) - 15:18, 29 June 2014
• IKBot
  |description = A robotic arm based reprap. |reprap = IKBot
  4 KB (651 words) - 23:01, 20 March 2011
• M-codes for EEPROM config
  .... Then it probably shouldn't be very difficult to port the changes over to RepRap's mainstream firmware. The idea is very obvious and I'm sure other people adjustment whenever a reprap is built, modified or the extruder hot-end
  11 KB (1,802 words) - 17:24, 28 November 2014
• MDF
  ...ed {{tag|wood}} product that has superior properties than plywood for most reprap projects. It's fairly strong, will not split among any wood grain, and has the Wedgewood[http://blog.reprap.org/search/label/wedgewood],
  2 KB (256 words) - 01:13, 20 November 2013
• Mendel LED print light
  |reprap = ]
  1 KB (229 words) - 05:21, 8 July 2011
• Power Supply
  Most Reprap electronics use {{SCODE|type=vcc|12V}} ranging from 5A-30A. Boards like the ...he following table shows the power requirements and limits for some common RepRap electronics:
  8 KB (1,374 words) - 21:37, 24 November 2023
• StepStick
  ...mit of 1A to suit a 1oz, 2-layer PCB, which should generally be plenty for reprap-type applications. This may be a limiting factor if you plan to use the sam ...(R1). See this thread for more details and suggested values: http://forums.reprap.org/read.php?13,128220
  16 KB (2,587 words) - 07:51, 2 June 2020
• Mendel/kr
  {{RepRap|name=Mendel|version=II|image=mendel.jpg|description=
  4 KB (365 words) - 19:08, 28 November 2014
• ELKa
  |reprap = eLKa
  389 bytes (48 words) - 17:18, 6 June 2017
• Powder Printer Recipes
  ...Material Safety Data Sheet for Z-Corp binder fluid which was posted on the RepRap forum by Gene Hacker. The full document can be located at: <font color="#00 ...erial Safety Data Sheet for Z-Corp printing powder which was posted on the RepRap forum by Gene Hacker. The full document can be located at: <font color="#00
  37 KB (5,672 words) - 15:05, 12 June 2021
• Powder Printer Recipes/zh cn
  ...Material Safety Data Sheet for Z-Corp binder fluid which was posted on the RepRap forum by Gene Hacker. The full document can be located at: <font color="#00 ...erial Safety Data Sheet for Z-Corp printing powder which was posted on the RepRap forum by Gene Hacker. The full document can be located at: <font color="#00
  35 KB (5,213 words) - 18:01, 27 December 2014
• SMT Pick-n-Place System
  To convert a RepRap 3d printer to be a multi-function machine has been the trend of another ent
  9 KB (1,390 words) - 21:17, 1 December 2022
• Printing electronics
  * To truly print its own non off-the-shelf parts, the RepRap needs print its own circuit boards. ...ould be good. Ideally, one shouldn't need a clean room to be able to use a RepRap to its full potential. That probably throws out photo-lithographic processe
  4 KB (555 words) - 06:07, 28 January 2020
• Temperature control
  A typical [[RepRap]] or [[RepStrap]] controls the temperature of the [[Hot End]] and (if it ha ...st]] for a while, and currently exists in the Marlin firmware (see [http://reprap.org/wiki/Gcode#M303:_Run_PID_tuning M303])
  4 KB (648 words) - 21:09, 12 December 2014
• Mendel 3547
  |reprap = Mendel
  504 bytes (59 words) - 03:24, 14 April 2014
• RepRap Franklin
  |name = RepRap Franklin |description = A RepRap emulator in software.
  2 KB (300 words) - 11:55, 27 March 2011
• Basic Starter Working Configurations
  ...nter... Now there are very many configurations due to the diversity of the RepRap Project. Full Package http://www.gamefront.com/files/20188808/RepRap-Tonokip-Repsnapper.zip (+ config file)
  5 KB (506 words) - 20:34, 8 August 2011
• ReplicatorG-Skeinforge-RAMPS
  I built a RepRap [[Mendel]] with [[Wade's Geared Extruder]]. Hardware: '''RepRap Mendel''' with 3 endstops: XMin, YMax, ZMin
  7 KB (917 words) - 08:58, 17 April 2011
• 1X2
  |image=Mrkim-reprap-1X2-4676.JPG |reprap = Sui Generis
  25 KB (4,053 words) - 03:28, 14 February 2024
• 1X2 Tallcat
  |image=Mrkim-reprap-1X2-Tallcat.JPG |reprap = Sui Generis
  7 KB (1,060 words) - 03:31, 14 February 2024
• Mattroberts' Compact Geared Extruder
  |reprap = Mendel # Torque transmitted by M3 set screws / bolts, so low stress on reprap gears.
  4 KB (673 words) - 06:50, 21 November 2011
• Externally Documented RepStraps
  [http://reprap.org/bin/view/Main/McWire_Cartesian_Bot_1_2 McWire RepStrap] [[Builders/Metalab|Metalab RepRap Research Team]]
  2 KB (241 words) - 12:38, 1 March 2013
• MungStruder
  |reprap = Sui Generis ...y so thought i would edit a wiki page. Check my forum posts [http://forums.reprap.org/read.php?70,70082]
  1 KB (191 words) - 19:52, 4 April 2011
• Portable Skeinforge
  |reprap =
  3 KB (358 words) - 11:35, 3 April 2011
• Wildseyed Simple Hot End
  When I began building my first RepRap, I found that many of you were experiencing problems with the hot ends, eit From http://forums.reprap.org/read.php?70,147404,147824#msg-147824 :
  9 KB (1,654 words) - 02:57, 13 February 2014
• LaserCutMendel
  ...through assembling a TechZone LaserCut Mendel kit - which is technically a RepRap "RepStrap. You can purchase and make your own parts for this machiene, or y ...order|left|250px|Photo of the LaserCut replacement parts (they replace the RepRap Printed parts) used in the LaserCut Mendel Kit]]
  10 KB (1,594 words) - 06:28, 13 September 2013
• Mattroberts' Vertex
  |reprap = Mendel
  893 bytes (119 words) - 15:21, 24 July 2011
• LaserCutFrame
  This page and its peers should guide you through assembling a RepRap Lasercut Mendel from the TechZone kit, or from parts you have lasercut whic
  12 KB (2,248 words) - 04:13, 26 November 2011
• LaserCutXAxis
  This page and its peers should guide you through assembling a RepRap Lasercut Mendel from the TechZone kit, or from parts you have laser cut whi
  6 KB (1,153 words) - 04:14, 26 November 2011
• LaserCutYAxis
  This page and its peers should guide you through assembling a RepRap Lasercut Mendel from the TechZone kit, or from parts you have laser cut whi
  5 KB (827 words) - 04:14, 26 November 2011
• Policy
  =About RepRap= RepRap was the first of the low-cost 3D printers, and the RepRap Project started the open-source 3D printer revolution.
  16 KB (2,508 words) - 20:46, 26 May 2018
• LaserCutZAxis
  This page and its peers should guide you through assembling a RepRap Lasercut Mendel from the TechZone kit, or from parts you have lasercut whic
  6 KB (1,038 words) - 04:14, 26 November 2011
• Prusa Mendel Build Manual/fr
  ...-6-avril], ceci devrait contribuer à faciliter la diffusion de ce type de RepRap dans la francophonie :) ...on.com/reprap/prusa-mendel-visual-instructions|link=http://garyhodgson.com/reprap/prusa-mendel-visual-instructions|Prusa Mendel Visual Instructions Front Pag
  49 KB (8,328 words) - 12:12, 9 November 2014
• LaserCutMotors
  This page and its peers should guide you through assembling a RepRap Lasercut Mendel from the TechZone kit, or from parts you have lasercut whic
  11 KB (1,875 words) - 04:14, 26 November 2011
• RUG/Pennsylvania/State College/Waste Reclamation System
  .../reprap.org/wiki/RUG/Pennsylvania/State_College/Main Back to State College RepRap Main] *[[Recyclebot| Recyclebot on reprap]]
  7 KB (1,188 words) - 23:29, 12 March 2014
• Tips
  When building a reprap, certain issues arise that may not be covered in the rest of the Wiki. ...like end-stop wires as interference can trigger the endstop [http://forums.reprap.org/read.php?1,584390].
  4 KB (742 words) - 16:18, 27 December 2015
• Huxley seedling hot end
  |name = [http://www.reprap.org/wiki/Huxley_Seedling Huxley Seedling] Hot-end Version 2.0 |description = designed Specificaly for the [http://www.reprap.org/wiki/Huxley_Seedling Huxley Seedling.]
  1 KB (184 words) - 03:17, 11 April 2011
• Prusa Mendel Assembly
  ...gson.com/reprap/prusa-mendel-visual-instructions|A [http://garyhodgson.com/reprap/prusa-mendel-visual-instructions visual guide] is also available.]] There is a triangle on each side of the Prusa RepRap. You will need to make two of these and then connect them together (in the
  49 KB (8,907 words) - 04:18, 14 February 2024
• MiniMaker
  [[Category:RepRap machines]]
  312 bytes (54 words) - 17:40, 24 November 2011
• RUG/Pennsylvania/State College/Printers/PSU Fab@Home
  ...e updated version of the Fab@home will be referred to by 'V2'. See [http://reprap.org/wiki/RUG/Pennsylvania/State_College/Printers/PSU_Fab@Home#Projects Proj |[http://reprap.org/wiki/Marlin Marlin]
  20 KB (2,997 words) - 22:11, 4 June 2014
• Sample reprap proposals
  RepRap Proposal RepRap is short for “REPlicating RAPid prototyping”, an open-source project fo
  4 KB (673 words) - 16:46, 24 November 2011
• Acorn nut
  |reprap = Sui Generis ...th a hole drilled in it can be used as the nozzle for the [[Hot End]] of a reprap-type plastic extruder.
  2 KB (290 words) - 05:48, 26 March 2015
• RepRap history
  Spring 2007 - The first RepRap Darwin was finished. Its RP parts were made in Stratasys and sent them to RepRap team members round the world.
  2 KB (286 words) - 17:04, 24 November 2011

View (previous 500 | next 500) (20 | 50 | 100 | 250 | 500)