Search results

Jump to: navigation, search

Create the page "$1" on this wiki! See also the search results found.

Page title matches

  • Darwin/Arduino Breakout 1 1
    = Arduino Breakout Shield v1.1 = * [http://parts.reprap.org/part/module/Arduino+Breakout+v1.1 Buy the components with ease w/ parts.reprap.org]...
    6 KB (794 words) - 13:59, 25 November 2011
  • Darwin/Arduino Breakout 1 2
    You can [http://downloads.sourceforge.net/reprap/reprap-arduino-breakout-1.2.zip?modtime=1206561051&big_mirror=0 download the electronics files from S
    7 KB (884 words) - 13:59, 25 November 2011
  • Darwin/Arduino Breakout 1 3
    Version 1.3 adds an extra row of power/ground screw terminals. You can [http://downloads.sourceforge.net/reprap/reprap-arduino-breakout-1.2.zip?modtime=1206561051&big_mirror=0 download the electronics files from S
    5 KB (666 words) - 13:59, 25 November 2011
  • Darwin/Arduino Breakout 1 4
    Version 1.4 fixes a potential short problem, and adds additional female headers to al .../superb-east.dl.sourceforge.net/sourceforge/reprap/reprap-arduino-breakout-1.4.zip download the electronics files from Sourceforge].
    7 KB (876 words) - 14:00, 25 November 2011
  • Arduino Breakout 1 1
    #REDIRECT [[Arduino Breakout v1.1]]
    35 bytes (4 words) - 04:59, 25 July 2015
  • Arduino Breakout 1 2
    35 bytes (4 words) - 05:00, 25 July 2015
  • Arduino Breakout 1 3
    35 bytes (4 words) - 05:00, 25 July 2015
  • Arduino Breakout 1 4
    Version 1.4 fixes a potential short problem, and adds additional female headers to al .../superb-east.dl.sourceforge.net/sourceforge/reprap/reprap-arduino-breakout-1.4.zip download the electronics files from Sourceforge].
    7 KB (1,003 words) - 12:13, 7 March 2013
  • DC Motor Driver 1 0
    {{Deprecated | DC Motor Driver 1 1}} ...et/project/downloading.php?group_id=159590&filename=reprap-dc-motor-driver-1.0-r1.zip download the release file] from SourceForge that has a bunch of he
    16 KB (2,496 words) - 10:31, 8 June 2013
  • DC Motor Driver 1 1
    You can [http://downloads.sourceforge.net/reprap/reprap-dc-motor-driver-1.1.zip?use_mirror=osdn download the release file] from SourceForge that has a {| border="1"
    17 KB (2,658 words) - 13:05, 24 June 2014
  • DarwinPowerAndCommunicationsCard 1 2
    62 bytes (7 words) - 04:46, 25 July 2015
  • Extruder Controller 2 1
    = Extruder Controller v2.1 = The reset button on the Extruder Controller v2.1 board is broken. If you have this board, you will need to manually reset i
    31 KB (5,027 words) - 20:19, 26 November 2011
  • GM3 Noise Suppressor 1 0
    39 bytes (5 words) - 04:58, 25 July 2015
  • Arduino Breakout 1 0
    35 bytes (4 words) - 04:59, 25 July 2015
  • Generation 1 Electronics
    = Generation 1 Electronics = [[Category:Generation 1 electronics| ]]
    4 KB (659 words) - 15:27, 23 July 2015
  • Generation 1 firmware
    [[Category:Generation 1 firmware| ]]
    868 bytes (109 words) - 15:18, 28 August 2015
  • Lasercut Pinch Wheel Extruder 1 2
    63 bytes (7 words) - 17:31, 28 November 2011
  • McWireCartesianBot 1 0
    ...f component specifications work: #10-24 x 3/4" screws, 3/4" x 3/4" rails, 1/4" acrylic, etc.
    4 KB (673 words) - 11:46, 28 November 2012
  • McWire Cartesian Bot 1 1
    = McWire Cartesian Bot v1.1 =
    487 bytes (49 words) - 17:48, 28 November 2011
  • McWire Cartesian Bot 1 2 (Death March: Do not build!!!)
    * [http://downloads.sourceforge.net/reprap/reprap-mcwire-cartesian-bot-1.2.1.zip?modtime=1200886076&big_mirror=0 Download the files from SourceForge]. ...the supports pictured are 1/16" thickness. It's highly recommended to use 1/8" thickness from McMaster.com'''
    37 KB (6,065 words) - 05:11, 8 September 2013
  • Motherboard 1 0
    131 bytes (13 words) - 20:17, 26 November 2011
  • Motherboard 1 1
    = Motherboard v1.1 = See [http://objects.reprap.org/wiki/Hacks_to_the_RepRap_Motherboard_v1.1 here in the Builder's Wiki] for hacks to this board.
    26 KB (4,326 words) - 20:17, 26 November 2011
  • Opto Isolator 1 0
    32 bytes (4 words) - 04:57, 25 July 2015
  • PWM Driver 1 0
    ...oject/downloading.php?group_id=159590&filename=reprap-freeduino-pwm-driver-1.0.zip download the release file] from SourceForge that has a bunch of helpf {| border="1"
    14 KB (2,230 words) - 20:21, 26 November 2011
  • PWM Driver 1 1
    = PWM Driver v1.1 = # [http://store.makerbot.com/electronics/electronics-kits/pwm-driver-v1-1-kit.html Buy the full kit (components + PCB) from MakerBot Industries]
    15 KB (2,310 words) - 10:17, 15 July 2012
  • RepRapServo 1 0
    The spatial wavelength is about 1/8", so you could make a handy position sensor or linear stepper out of it.
    17 KB (2,710 words) - 17:33, 16 May 2016
  • RepRap Motherboard 1 1
    29 bytes (2 words) - 02:16, 25 September 2010
  • RepStrap 1 0 Seedling
    31 bytes (2 words) - 22:30, 11 November 2010
  • Motherboard 1 2
    #REDIRECT [[Motherboard 1.2]]
    29 bytes (2 words) - 13:39, 17 March 2010
  • StepperTester 1 0 BOM
    368 bytes (49 words) - 20:05, 26 November 2011
  • UniversalControllerBoard 1 2
    45 bytes (5 words) - 04:54, 25 July 2015
  • SupportExtruder 1 0
    = The Paste Extruder Version 0.1 = ...(furthest from the solenoid) with the broader part of the connector (pins 1 through 8) at the bottom (nearest the solenoid).
    13 KB (2,301 words) - 08:06, 4 May 2013
  • Temperature Sensor 1 0
    37 bytes (4 words) - 05:23, 25 July 2015
  • Temperature Sensor 1 1
    #REDIRECT [[Temperature Sensor v1.1]]
    37 bytes (4 words) - 05:22, 25 July 2015
  • Thermocouple Sensor 1 1
    = Thermocouple Sensor v1.1 = * Make tracks to/from Pin 1/14 to thermocouple fatter
    234 bytes (32 words) - 19:38, 26 November 2011
  • OptoEndstop 2 1
    #REDIRECT [[OptoEndstop 2.1]]
    29 bytes (2 words) - 13:41, 17 March 2010
  • Thermocouple Sensor 1 0
    38 bytes (4 words) - 05:19, 25 July 2015
  • Magnetic Rotary Encoder 1 0
    42 bytes (5 words) - 05:20, 25 July 2015
  • Stepper Motor Driver 2 1
    #REDIRECT [[Stepper Motor Driver 2.1]]
    38 bytes (4 words) - 16:16, 17 March 2010
  • Stepper Motor Driver 1 2
    #REDIRECT [[Stepper Motor Driver 1.2]]
    38 bytes (4 words) - 16:17, 17 March 2010
  • Stepper Motor Driver 1 0
    #REDIRECT [[Stepper Motor Driver 1.0]]
    38 bytes (4 words) - 16:19, 17 March 2010
  • DarwinStepperController 1 2
    48 bytes (6 words) - 04:50, 25 July 2015
  • Compliant Linear Motion Mechanism 1
    |name = Compliant Linear Motion Mechanism 1 y = (1 / E / I) * ( Pmax*x.^3 / 6 - Pmax*L*x.^2 / 4 );
    9 KB (1,420 words) - 05:25, 8 September 2013
  • Stepper Motor Driver 1 1
    #REDIRECT [[Stepper Motor Driver 1.1]]
    38 bytes (4 words) - 22:10, 6 June 2010
  • McWire Cartesian Bot 1 2
    #REDIRECT [[McWire Cartesian Bot 1 2 (Death March: Do not build!!!)]]
    69 bytes (9 words) - 03:57, 20 November 2010
  • 32 Generation X 1 Electronics
    1) More than 3 stepper axes. 7 should be a minimum 9) Memory storage. 1 GB should be a minimum
    11 KB (1,809 words) - 10:04, 26 November 2011
  • Prusa Mendel iteration 1/ru
    ...бласти печати: 200 мм x 200 мм x 100 мм (8.2" x 8.2" x 4.1") {| class="wikitable sortable" border="1"
    15 KB (540 words) - 02:29, 22 December 2012
  • Prusa Mendel (iteration 1)
    * Printing Size: 200mm x 200mm x 100mm (8.2" x 8.2" x 4.1") {| class="wikitable sortable" border="1"
    8 KB (1,140 words) - 11:06, 15 September 2012
  • MakerGear Mosaic 1: MAF-1
    MAF-1 es la primera impresora 3D modelo "Mosaic" del proyecto Clones Wars. (Sigo * '''Nombre''': '''<font color="#0000FF">MAF-1</font>'''
    2 KB (304 words) - 11:33, 12 October 2012
  • Rambo 1 0
    This page is relative to an older revision - 1.0. Image:rambo1-0top.png|Top/1<small><sup>st</sup></small> copper layer
    591 bytes (93 words) - 10:30, 28 November 2014
  • RUG/Pennsylvania/State College/Printers/PSU Unit Solidoodle 1
    ...dle2.jpg|link=RUG/Pennsylvania/State_College/Printers/PSU_Unit_Solidoodle_#1|25px|alt=Silver]] </includeonly> This page contains information about the PSU Unit Solidoodle #1 3D printer.
    856 bytes (108 words) - 11:17, 27 October 2014
  • RUG/Pennsylvania/State College/Printers/PSU Unit prusa i3 1
    This page contains information about the PSU Unit Prusa i3 #1 3D printer.
    884 bytes (124 words) - 11:18, 27 October 2014
  • Prusa Mendel (iteration 1)/pt
    {| class="wikitable sortable" border="1" | 1 || x-carriage || RP ||stl[[https://github.com/prusajr/PrusaMendel/blob/mast
    14 KB (2,132 words) - 14:59, 2 March 2015
  • PowerComms 1 2 BOM
    66 bytes (8 words) - 05:18, 25 July 2015
  • DarwinExtruderController 1 2
    44 bytes (5 words) - 04:48, 25 July 2015
  • StepperTester 1 0
    37 bytes (5 words) - 04:51, 25 July 2015
  • UniversalControllerBoard 1 3
    45 bytes (5 words) - 04:56, 25 July 2015
  • UniversalController 1 2 BOM
    49 bytes (6 words) - 04:56, 25 July 2015
  • PowerCommsBoard 1 3
    62 bytes (7 words) - 04:47, 25 July 2015
  • I3 02-B-6-1
    43 bytes (7 words) - 05:16, 1 September 2016
  • EI3 02-B-6-1
    ==02-B-6-1==
    57 bytes (9 words) - 05:38, 1 September 2016
  • EI3 11-B-4-1
    ==EI3 11-B-4-1==
    47 bytes (9 words) - 06:01, 1 September 2016
  • EI3 13-B-7-1
    ==EI3 13-B-7-1==
    76 bytes (13 words) - 06:05, 1 September 2016
  • I3 11-B-4-1
    == 11-B-4-1 ==
    43 bytes (8 words) - 03:02, 29 September 2016
  • I3 13-B-7-1
    86 bytes (12 words) - 03:07, 29 September 2016
  • Project 1
    |name = Project 1
    877 bytes (135 words) - 06:44, 16 November 2016
  • Phase 1
    |name = Phase 1 }}'''Phase 1''' is an affordable high quality RepRap 3D printer.
    4 KB (576 words) - 09:08, 23 July 2018

Page text matches

  • Health and Safety
    ...to declare chemical listed products if they import them at a quantity over 1 ton/year. If additives are in low quantity, the declaration threshold may n
    10 KB (1,581 words) - 20:58, 5 January 2018
  • RepRap Social Contract
    October 1, 2006
    458 bytes (72 words) - 06:21, 31 July 2014
  • Website Terms And Conditions
    1. Some People have asked to donate money to MetalicaRap specifically, should ...age, and Solar Plant Dev. they are all closed email lists and have between 1 and 5 on each team, having gone on different Open design Opensource days t
    1 KB (199 words) - 16:09, 24 November 2011
  • RAMPS 1.3/nl
    {{Languages|RAMPS 1.3}} |name = RAMPS 1.3
    19 KB (3,027 words) - 06:48, 11 December 2011
  • A community specification for an improvement to STL files.
    ...T<sub>0</sub> would be V<sub>1</sub>, V<sub>2</sub>, V<sub>3</sub>; T<sub>1</sub>, T<sub>2</sub>, T<sub>3</sub>. -1.000 -1.000 0.000 (1st vertex)
    9 KB (1,363 words) - 14:04, 8 October 2015
  • Available Files
    {| border="1" cellspacing="0" cellpadding="5" align="center"
    3 KB (484 words) - 08:00, 2 January 2015
  • Tux
    {| border="1" cellspacing="0" cellpadding="5" align="center" | Blender || .blend || [[:Image:Tux.blend]] || 1.1Mbytes || Native blender 2.41 ||
    2 KB (276 words) - 08:06, 2 January 2015
  • Minimug
    {| border="1" cellspacing="0" cellpadding="5" align="center"
    596 bytes (80 words) - 08:02, 2 January 2015
  • Gear
    .../blog.reprap.org/search?q=herringbone]; [http://forums.reprap.org/read.php?1,33645]; [http://blog.reprap.org/search?q=rack]; [[RBS/Rack]] {| border="1" cellspacing="0" cellpadding="5" align="center"
    1 KB (159 words) - 08:01, 2 January 2015
  • Darwin corner bracket
    {| border="1" cellspacing="0" cellpadding="5" align="center"
    637 bytes (91 words) - 05:44, 19 August 2013
  • WineGlass
    {| border="1" cellspacing="0" cellpadding="5" align="center"
    477 bytes (63 words) - 08:07, 2 January 2015
  • Door handle
    ...e handle to screw onto the shaft (which is easy - just make the hole about 1 mm undersized and then the metal shaft will cut its own thread when you scr
    833 bytes (147 words) - 08:00, 2 January 2015
  • Comparison of Electronics
    {| border="1" cellspacing="0" cellpadding="2" class="wikitable sortable" || GPL || v1.4 || 1-2 || 3 (maximum, shared w/ Heaters) || 3 (maximum, shared with Fa
    16 KB (1,730 words) - 16:14, 26 April 2020
  • Darwin/Thermoplast Extruder
    {| border="1" [[image:ThermoplastExtruder_2_0-retaining-screw-1.jpg|thumb]]
    38 KB (6,703 words) - 17:54, 13 October 2013
  • Printing Material Suppliers
    ! Vendor !! Shipping location !! Material(s) !! 1.75&nbsp;mm !! 3&nbsp;mm !! Reviews & Additional notes. |[http://www.3druckstore.com/Filament:::1.html 3Druckstore] || DE
    40 KB (4,984 words) - 06:50, 27 June 2016
  • Building A Stripboard Comms Controller
    * C2-C5: 1&mu;F eletrolytic capacitors (with a voltage rating of 30V or higher). * A piece of stripboard with 2.54mm (0.1") spaced continuous track. It should be a minimum of 21 holes along the tr
    12 KB (1,987 words) - 05:01, 25 July 2015
  • Laser Cutter Notes
    1 Watt pigtail diode laser with optical head, different diodes with up to 25 ...ctors. The so called M140 variety can go easily up to 2Watt when driven at 1.4Ampers. With this quite more hefty diode you can expect to cut any color o
    16 KB (2,450 words) - 18:14, 16 July 2020
  • CMM
    *"Generic Touch Probe": we can mount a touch probe toolhead on a 2+1 axis machine like a CNC router, mill, or RepRap. This is convenient if we
    868 bytes (124 words) - 08:14, 2 January 2015
  • Builders/Lasercut Hints
    STEP 1: PREPARATION FOR THREAD RESTORATION ...bending the rod to break it is easier than cutting (use the nuts from STEP 1 to hold the rod close to the cut so you don't damage threads or bend the ro
    9 KB (1,585 words) - 02:42, 7 November 2010
  • Thermoplast Extruder Improvements
    |categories = Thermoplastic Extruder 1.0 1. Keeping the flow rate of the extruder well controlled (proportional to XY
    3 KB (461 words) - 08:25, 16 May 2015
  • Microcontroller Firmware Hints
    *Copy sub directories in reprap-arduino-firmware-1.3/library directory to Arduino hardware/libraries directory. *With reprap-arduino-firmware-1.3 you should end up with 14 sub directories below /libraries.
    15 KB (2,247 words) - 18:45, 13 July 2015
  • User Manual: Host Software
    usb 1-1: new full speed USB device using uhci_and address 2 usb 1-1: configuration #1 chosen from 1 choice
    5 KB (834 words) - 11:33, 2 July 2019
  • Nophead's Extruder Tweaks
    ...10/gm3-motor-suppressor.html here]. An RRRF version [[GM3 Noise Suppressor 1 0]] is under development details [http://blog.reprap.org/2008/09/new-board- ...gs are required at the bottom for hard plastics like PLA and ABS. Mine are 1.5mm x 9mm x 25mm and came from an A3 flat bed scanner's lid hinge. Note spr
    14 KB (2,350 words) - 17:08, 28 November 2014
  • Nophead's techniques for using Skeinforge
    Warm up to raft temperature and wait 1 minute for PTFE nozzle to expand and filament to melt above the PTFE / bras
    3 KB (580 words) - 06:37, 11 January 2015
  • Drexler Arm
    [[Image:drexler-arm-1.png|right|400px]] ...aterials shaft down the middle. The full design has 5 rotating joints and 1 extending segment.
    1 KB (163 words) - 07:12, 8 September 2013
  • Builders/Frank
    ...mmer months of 2007. He is a McWire Cartesian bot that uses the RepRap Gen 1 electronics and an Mk II extruder. Standard 200 step stepper motors from th Frank's frame is a McWire design built from 1" steel water pipe and fittings. The frame is bolted to a piece of MDF for s
    16 KB (2,747 words) - 19:57, 27 April 2011
  • Build a reprap
    '''Step 1:''' If you have Windows, go to [[http://goodbye-microsoft.com/ Here]], get
    10 KB (1,695 words) - 12:12, 7 March 2013
  • Lego RepStrap
    [[Image:Legorap1c01.jpg|500px|Step 1]]
    3 KB (405 words) - 17:47, 9 November 2015
  • PIC Current Limiter
    == Adding Current Limiters to the PIC/Generation 1 Electronics == The PIC/Generation 1 electronics do not have any form of current limitting. They rely on the ste
    2 KB (271 words) - 20:27, 26 November 2011
  • FTIStrap
    This page describes the "FTIStrap", a RepStrap [1,2] which is almost completely built from fischertechnik [3] parts. Construc * position accuracy: approx. 0.1 mm in all directions (i.e., approx 256 lpi)
    66 KB (10,989 words) - 03:03, 28 April 2012
  • Builders/ReplathHowto
    === Step 1 === [[Image:ReplathPenSetup1.png|Pen Setup Step 1]]
    4 KB (593 words) - 04:06, 29 December 2014
  • Builders/Config Methods/de
    == Fehler in der GCode-Firmware 1.4 bei Verwendung von Gleichstrommotoren == #define EXTRUDER_0_STEP_ENABLE_PIN (byte)-1
    3 KB (540 words) - 13:22, 25 November 2011
  • RepRap in italiano - RepRap in Italian/Costruire una reprap
    '''Passo 1:''' se avete Windows, andate [[http://goodbye-microsoft.com/ Qui]], scarica [http://store.RRRF.org/product_info.php?cPath=1&products_id=78 Complete Arduino Electronics Kit] ordinato insieme al microc
    12 KB (1,752 words) - 18:23, 28 November 2014
  • RepRap in italiano - RepRap in Italian/Assemblatori
    There is a dedicated [[http://forums.reprap.org/read.php?1,17299 forum thread here]] for discussion of this Builder's wiki, what shoul
    4 KB (636 words) - 08:32, 8 July 2014
  • ActionCar
    [[Image:ActionCar ABS print.jpg|thumb|right|300px|ABS print of a 1/2 scaled down Action Car Chassis]]
    670 bytes (115 words) - 10:24, 26 June 2011
  • BrainGear
    {| border="1" cellspacing="0" cellpadding="5" align="center"
    543 bytes (85 words) - 10:38, 26 June 2011
  • Builders/McMaster-Carr Part Numbers
    1 40mm long piece of M6 brass bolt with a 3mm hole drilled right down the mid 1 M5 nyloc nut 90576A114 [http://www.mcmaster.com/nav/enter.asp?partnum=90576
    6 KB (862 words) - 17:55, 13 October 2013
  • Hardware Store (HS) Extruder
    {|border="1" |1
    4 KB (577 words) - 19:58, 18 July 2011
  • Host software liveusb image
    * 1 Gb USB flash drive or larger * Atleast 1 gb ram (for the host software)
    4 KB (675 words) - 17:19, 4 March 2012
  • Puzzles
    {| border="1" cellspacing="0" cellpadding="5" align="center" ! Difficulty (1 = easy, 10 = impossible)
    1 KB (155 words) - 08:03, 2 January 2015
  • Builders/Config Methods
    == Bug in GCode firmware 1.4 using DC motors == #define EXTRUDER_0_STEP_ENABLE_PIN (byte)-1
    3 KB (516 words) - 13:21, 25 November 2011
  • Builders/Config/Getting Started
    STEP 1: Do a pre-flight check. Look round all the RepRap joints and mechanisms, lo * Test 1 - direction. Carefully press X-axis HOME button keeping your hand on the Em
    4 KB (703 words) - 18:04, 28 November 2014
  • ArduinoSend
    Normally, the arduino is reset by dropping the DTR line for 1 second. Since the Arduino takes several seconds to reboot, you will want to
    3 KB (501 words) - 10:12, 7 May 2015
  • Builders/Metalab/AoI MetaCAD
    The size parameters defaults to 1 Defaults to cylinder(1, 1, 1, 1)
    5 KB (816 words) - 06:34, 11 January 2015
  • Burning the Sanguino Bootloader
    ...ore. The Sanguino is now compilable and uploadable easily with Arduino IDE 1.0.4 or above using Optiboot loader. Atmega644p and Atmega1284p are now buil ...p board's ISP header. Orientation is critical (red wire corresponds to pin 1)!
    3 KB (446 words) - 08:20, 4 October 2013
  • A self-organising peer-to-peer cell-based wi-fi network
    * 1. It attenuates its power in proportion to the proximity of its other interl ...ly interrogates any new node to ensure that it conforms to characteristics 1 and 2. If the new node does not, its signals are not relayed.
    4 KB (615 words) - 13:45, 12 May 2015
  • Art of illusion
    === 1. Getting started === ...have the cursor click to one tenth of that, so everything I design is on a 1 mm grid. This gives precision, but the screen isn't filled with lots of gr
    18 KB (3,206 words) - 06:33, 11 January 2015
  • ArcCompensation
    {| border="1" | 1 || 1.28
    4 KB (695 words) - 05:12, 19 July 2015
  • Useful Software Packages
    .../labs.autodesk.com/utilities/fusion/ Autodesk Labs] and is good until June 1, 2011. A Mac native preview has been unveiled and is planned to be availabl ====Stripboard Designer 1.0====
    27 KB (4,082 words) - 12:06, 26 October 2021
  • Calibration
    ...e motors just start running. Then give the trim port a final turn of about 1 eighth of a turn and your should be good to go. When using Marlin firmware change X_ENABLE_ON from 0 to 1.
    41 KB (6,863 words) - 16:15, 31 March 2020
  • Sandbox
    <math> 1 + 1 = 2 </math> ...\frac{\ln\left ( \frac{R}{R_{0}} \right )}{(\frac{1}{T + 273.15}) - (\frac{1}{T_{0} + 273.15})}
    2 KB (326 words) - 12:33, 13 July 2014
  • Mendel frame
    | z-leadscrew-base||1||2||Assembly Total # of assemblies: 1
    17 KB (2,708 words) - 06:17, 9 April 2014
  • Darwin/Arduino GCode Interpreter
    This variable stores how many steps to take to move the X axis 1 inch. You will need to set this as accurately as possible if you want your ..."-20 threaded rod means that there are 20 threads per inch (aka 20 turns = 1 inch.) Simply take that number and multiply it by the steps in a revolutio
    7 KB (930 words) - 20:54, 7 July 2011
  • Darwin/AssemblingDarwinElectronics
    {| border="1" ...pper exerciser window is useful for this.) Get the platform to stop about 1 mm below the nozzle.
    11 KB (1,620 words) - 09:09, 28 January 2013
  • Clone Wars: Zoltan
    ## <s>Ramps 1.4</s> *Ramps 1.4 + 5 pololus (+disipadores) + Mega 2560 + Hotbed MK2b + Correas GT2 + Pole
    4 KB (626 words) - 06:18, 22 May 2013
  • Darwin/BOM Notes
    * The toothed pulleys supplied by McMaster fit a 1/4" shaft. For the Y and Z axes, these need to be bored out to 8mm. The X pu * On the generation 1 extruder board, the value of C3 should be 100nF for normal operation. Also
    1 KB (219 words) - 14:01, 25 November 2011
  • Darwin/BackgroundPage
    {| border="1" * 1. The number of them in existence and the wealth they produce can grow expon
    12 KB (1,911 words) - 17:56, 13 October 2013
  • Mendel Electronic Wiring
    Start by wiring up the 12-volt power cables. You'll need 1.1 m of twin wires. ...tely above is looking into the socket (female) and at the pins (male). Pin 1 is the ground (negative) connection and pin 2 is +12v connection. Pin 3 is
    7 KB (1,178 words) - 22:37, 4 February 2024
  • Mendel USB and power connector
    ...ely above is looking into the socket (female) and at the pins (male). Pin 1 is the ground (negative) connection and pin 2 is +12v connection. Pin 3 is ...R Future Technology Devices International Ltd.], [http://parts.digikey.com/1/parts/1501998-module-usb-ser-uart-ft232-24-dip-um232r.html Digi-Key], or fr
    5 KB (921 words) - 21:28, 24 November 2023
  • Mendel materials procurement
    1) 370 + 234 + 370, remainder=26 ...£10||Camiel's [http://www.mendel-parts.com/index.php/catalog/electronics-1/sets.html Gen6 electronics] + Shipping
    9 KB (1,448 words) - 13:14, 7 June 2018
  • Extruder/Mendel
    Assembly qty: 1 | Thermal-barrier and nozzle||1||1||Assembly
    11 KB (1,944 words) - 06:23, 18 March 2014
  • Mendel X-axis
    Total # of assemblies: 1 ...obot-m4/printed-parts/x-carriage-lower_1off.stl x-carriage-lower_1off]||1||1||RP
    15 KB (2,201 words) - 00:49, 5 February 2024
  • Mendel Z-axis
    ...arts/z-leadscrew-base-bar-clamp_2off.stl z-leadscrew-base-bar-clamp_2off]||1||2||RP ...n-robot-m4/printed-parts/z-leadscrew-base_2off.stl z-leadscrew-base_2off]||1||2||RP
    8 KB (1,124 words) - 06:24, 18 March 2014
  • Mendel Y-axis
    Total # of assemblies: 1 ...//www.thingiverse.com/thing:1625 #2] [http://blog.arcol.hu/?p=312 #3])||1||1||RP
    8 KB (1,156 words) - 00:56, 5 February 2024
  • Mendel circuit boards
    Total # of assemblies: 1 | motherboard-plate.par||1||1||Sheet [[Media:Mendel motherboard-plate.par.png|image]] [[Media:Motherboard
    2 KB (310 words) - 15:14, 25 November 2011
  • Belt splitter jig
    | belt-width-adjuster_1off||1||1||RP | Box cutter/Stanley blade||1||1||Blade
    2 KB (353 words) - 05:07, 17 December 2011
  • Commissioning
    If you have a 5mm splined shaft, with no gearbox, on a motor with a 1.8 degree step, and 3mm feedstock, a good starting point is: If you have a 3/16" splined shaft, with no gearbox, on a motor with a 1.8 degree step, and 3mm feedstock, a good starting point is
    10 KB (1,533 words) - 18:44, 13 July 2015
  • 3D scanning
    ...king a 3D file of an object just using a camera or a camcorder with either 1) a projected grid from a video projector or 2) a projected line(s) from low *"Generic Touch Probe": we can mount a touch probe toolhead on a 2+1 axis machine like a CNC router, mill, or RepRap. This is convenient if we
    8 KB (1,235 words) - 04:31, 21 October 2016
  • Mendel/it
    Quì si trovano i file in 3d per [http://objects.reprap.org/mediawiki/images/1/1a/MendelSolidworks.zip - Solidworks 2010 - 18mb] delle parti meccaniche ed ...3 mm.|| [[PLA]], [[HDPE/it|HDPE]], [[ABS]] e altri. Utilizza filamenti ø 1/8”.
    5 KB (698 words) - 01:06, 5 February 2024
  • Mendel
    ...]] & more. Uses ø 3 mm filament.|| [[PLA]], HDPE, [[ABS]] & more. Uses ø 1/8” filament.
    4 KB (654 words) - 23:01, 1 February 2024
  • PCB adaptions for Mendel
    1. Install Molex conectors on your stepper motors (all except the extruder mo | Stepper Motor Driver v2.3||1||3||
    10 KB (1,752 words) - 08:13, 27 November 2011
  • Circuit board construction
    ...sor as CPU, they all can drive bipolar stepper motors all provide at least 1/8 microstepping and they all run the same firmwares ( = controller software {| border="1" cellspacing="0" cellpadding="2"
    3 KB (446 words) - 04:27, 26 November 2015
  • Génesis
    1. El número de ellos en existencia y producir una riqueza que puede crecer Texto de Adrian Bowyer, 2 de febrero 2004, actualizado: 21 de junio 2005, 1 de diciembre2005, 24 de febrero 2006, 18 de mayo 2007
    12 KB (2,138 words) - 06:15, 26 November 2011
  • Eiffel
    The first version will have a footprint of ~1 ft x 2 ft (30 cm x 60 cm), and a workspace of 1) Thermoplastic: like a normal RepRap
    8 KB (1,243 words) - 11:25, 28 October 2013
  • Mendel/es
    .... Usa filamentos de ø 3 mm.|| PLA, HDPE, ABS y más. Usa filamentos de ø 1/8” filament. ...n||Resolución del cabezal 0.5 mm, 2 mm tamaño característico mínimo, 0.1 mm posicionamiento de precisión, capa thk 0.3 mm||Resolución del cabezal
    4 KB (651 words) - 18:52, 28 November 2014
  • RBS/Beam
    You can make RBS beam from cutting 1/2" sheet with a laser cutter. ...beams from thin plywood sheet. Just cut long thin, dovetail-edged strips, 1" or 2" wide and glue them together.
    4 KB (618 words) - 23:30, 19 November 2013
  • Mendel parts more info
    {| class="wikitable" border="1" | 1
    15 KB (2,229 words) - 15:15, 25 November 2011
  • Measurement/Circle Test
    You really want a 1-2-3 block and an edge-finder, but that adds $50+ to the price of your machi
    1 KB (184 words) - 17:11, 28 November 2014
  • Canadian Suppliers
    ! Material(s) !! 1.75&nbsp;mm !! 3&nbsp;mm !! Reviews & Additional notes ...e the filament you are looking for, you can make a backorder and get it in 1 week ||
    11 KB (1,492 words) - 16:31, 18 September 2017
  • CNC Router
    ...C Router able to handle raw materials that come in a "full-sized sheet" of 1.2 m × 2.4 m ( 4 feet × 8 feet, aka "four by eight") slab. It may be a [[ Zenbot has several CNC routers for under $ 1 500 (not including the spindle).
    7 KB (1,100 words) - 17:04, 13 April 2020
  • Casting/Pewter
    ...really hot (and thus safely dry) I poured in the pewter and left it for a 1/2 hr or so to cool off gently. I definitely did not impatiently have-to wit
    4 KB (663 words) - 22:24, 14 January 2016
  • Materials/Appropriate Machines
    Also, we need to distinguish between 2D, 2D+1, and 3D form factors for the end object. ...n ... [http://forums.reprap.org/search.php?0,search=laminated,author=,page=1,match_type=ALL,match_dates=0,match_forum=ALL,match_threads=0 other discussi
    3 KB (355 words) - 19:33, 9 November 2021
  • About
    ...first imperfect replicator. ''3D Printing and Additive Manufacturing,'' 1(1), pp.4-5. https://www.liebertpub.com/doi/abs/10.1089/3dp.2013.0003 ...turn on Investment for Open-Source 3-D Printers]. ''Technologies'' 2017, 5(1), 7; doi:10.3390/technologies5010007 [https://www.academia.edu/31327768/Eme
    11 KB (1,573 words) - 09:29, 6 May 2024
  • Community portal
    [[#Getting involved|1 Getting involved]]<br /> ...n how to get a new RepRap wiki account: [http://forums.reprap.org/read.php?1,641102 How to get a new RepRap wiki account]
    7 KB (1,046 words) - 08:51, 19 October 2021
  • Epoxy granite
    |url = [http://dev.forums.reprap.org/read.php?1,9376 Forum Thread] Image:Mixing 1.jpg|Mixing 1
    5 KB (785 words) - 11:37, 1 December 2014
  • Metal Mendel
    ==Version 1 Errata==
    7 KB (1,239 words) - 12:27, 21 September 2015
  • Wooden Mendel
    ...-bearing plates & mirror are very difficult to make from wood. Get some 1/16th inch (scant 2mm) aluminum sheet and a hacksaw. Cut 4 25mm x 36mm rect
    4 KB (712 words) - 04:04, 25 April 2011
  • Laser Cutter/Background
    20" high, cut from 1/8" baltic birch, selling on etsy for $88. This
    6 KB (902 words) - 16:50, 13 April 2020
  • Filament Jamming Detection
    [[File:FilamentDetectImage1.png|thumb|Image 1 - Illustration of one possible approach]] * Part 1: [http://www.thingiverse.com/thing:1790228]
    6 KB (1,032 words) - 12:40, 11 December 2017
  • Java Software Preferences File
    === FoundationLayers=-1 === ...n under the object being built before building proper starts. Set this to -1 to suppress the laying down of foundations.
    22 KB (3,532 words) - 17:59, 28 November 2014
  • RepOlaRap
    1. Use 13mm for all moving parts to reduce weight.
    6 KB (888 words) - 23:49, 19 November 2013
  • NEMA Motor
    ...f their [[faceplate]] in tenth of inches. So a "NEMA 17" has a 1.7 inch by 1.7 inch faceplate. By standardizing the stepper motors (the faceplates, [[fl * <tt>NEMA 34D016</tt> 3.4" diameter stepper motor, that is 1.6" long, with a flange.
    5 KB (718 words) - 05:20, 7 September 2015
  • Metal deposition print head
    ...l-stress-distributions-multilayer-laser-solid-freeform-fabrication-process-1/ interesting, computational simulation of thermal distortion and stress dur ...d stress, to form a cylindrical shell of radius r where: r=(α*dT/dz) -1 ( 1)
    84 KB (13,534 words) - 22:26, 14 January 2016
  • PMMA
    ...box frame, made of wood, is actually a much stronger frame, regardless of 1/Appearance, a 'value added' feature sought by those who buy 'Acrylic 3D Pri
    3 KB (483 words) - 04:58, 14 February 2021
  • Delta
    ==Prototype 1== [[Image:Delta Prototype 1 upside down.jpg|300px| Delta prototype 1 upside down]]
    9 KB (1,398 words) - 13:09, 21 October 2016
  • T-Rep
    ...is a prototype printer built primarily from 80/20 [[T-Slot]] extrusion and 1/8" aluminum plate.
    361 bytes (40 words) - 20:49, 12 January 2020
  • LeBigRep
    ...rger_RepRap|scaled up]] 3dprinter which would produce large objects with a 1 m3 max. dimension. big enough for printing a chair, a table, prosthetics, h
    953 bytes (132 words) - 01:53, 5 February 2024
  • SpoolHead
    1. Controllably feeding the wire from the spool;
    9 KB (1,361 words) - 20:28, 23 January 2013
  • Bluetooth Wireless Communication
    1) You need to get yourself a Bluetooth dongle, if your PC doesn't have inte Type '''SU,96,8,0,0,1'''
    6 KB (965 words) - 05:22, 30 December 2014
  • Support Extruder
    ...led plans for building a support extruder tool head, see [[SupportExtruder 1 0]].''
    3 KB (497 words) - 09:14, 17 April 2014
  • Heated Bed
    ...te PVA based glue like Elmer's Glue-All or School Glue. The ratio is about 1 part glue to 10 parts water. Apply it to a hot bed and allow the solution t Folks at the 3d printing brazil group have discovered that a solution of 1:10 jello to water adhere both PLA and ABS if the heated bed is over 60°C,
    31 KB (5,100 words) - 21:49, 11 November 2018
  • Pirated CupCake
    ...paste, the plate was sandwiched between 2 kapton sheets, and covered with 1.5mm aluminium sheet. ...we were able to operate the boards, now supplemented with a Stepper Driver 1.2 for the Z axis. After finally getting everything running, the CupCakeStra
    24 KB (3,862 words) - 23:34, 19 November 2013
  • Wade's Geared Extruder
    [http://grabcad.com/library/wade-s-geared-extruder-onshape-cad-1 GrabCAD] ...Onshape] or [http://grabcad.com/library/wade-s-geared-extruder-onshape-cad-1 GrabCAD]
    10 KB (1,618 words) - 09:33, 5 November 2016
  • Arduino Mega Pololu Shield
    ...ersion 1.25 or [[Generation 7 Electronics]]. Version 1.25 and earlier are "1.5 layer" designed boards (i.e. it's double sided board, but one of layers c ...nds with the version you are building [[RAMPS1.4]],[[RAMPS1.3]] or [[RAMPS 1.2]]
    21 KB (3,268 words) - 16:19, 20 November 2018
  • Kapton Tape
    <br />--[[User:Nudel|Nudel]] 01:03, 1 October 2011 (UTC)</blockquote> <br />--[[User:jCollasius|jCollasius]] 22:40, 1 Mai 2015 (UTC)</blockquote>
    6 KB (829 words) - 19:20, 18 July 2016
  • Endstop/fr
    E.g: [[Gen7_Endstop_1.3.1|Gen7 Endstop]] and [[BIQ Opto Endstop|Opto Endstop]]. [[File:Gen7 Endstop 1.2 Assembled.jpeg|Gen7 Endstop v.1.3.1|300px|center]]
    5 KB (776 words) - 06:03, 16 May 2015
  • House Style
    1) I seem to have elected myself "Seniormost Library Gnome" and
    3 KB (465 words) - 12:46, 14 July 2014
  • Community/6x10000s Problem
    ...10,000 damn websites.''' 2-3 websites is better than 10,000 websites, and 1 website twice or thrice as good, because it means 10,000 less outgoing link
    3 KB (471 words) - 09:10, 13 January 2015
  • High Temperature Metal Casting
    * [http://www.theodoregray.com/PeriodicTable/PopularScience/2003/09/1/index.html microwave] ...nominally CaSO4·1/2H2O. It is created by heating gypsum to about 150 °C.[1]
    12 KB (1,854 words) - 08:17, 19 February 2013
  • Library/Notes
    ...them away, while still paying for the materials for each developer to make 1 mendel a year, and still have a nice ''booze-up'' with the rest of the non-
    12 KB (1,999 words) - 11:25, 28 November 2012
  • RepRap Buyers' Guide
    ...of people that have 50-1000 posts in our forums than people that have only 1 post, regardless of whether it's negative or positive. We have had some pro | Gear M, M2 || [http://forums.reprap.org/read.php?1,102156/ 1]
    16 KB (1,864 words) - 14:50, 29 February 2016
  • Gada Prize
    ...ated Bed Team]] - (Team: Casainho) - http://dev.forums.reprap.org/read.php?1,33327 *[[Cyberdyne T-1| Team Cyberdyne]] - (Team: JohnnyCooper) - Blog: http://teamcyberdyne.blogs
    5 KB (838 words) - 12:51, 2 June 2016
  • CAM Toolchains
    {|border="1" cellpadding="5" cellspacing="0" class="wikitable sortable" {|border="1" cellpadding="5" cellspacing="0" class="wikitable sortable"
    13 KB (1,741 words) - 17:07, 10 October 2019
  • McWire (Death March: Do not build!!!)
    ...printed parts for the mendel. Some people have had some success with using 1/2-16 rod instead. |1
    16 KB (2,625 words) - 05:11, 8 September 2013
  • Pick and Place ToolHead
    * 1 10 mm M2 screw, or whatever screw will couple with the shaft on the GM3 gea * 1 18 gauge blunt tip dispenser needle
    3 KB (521 words) - 01:42, 28 March 2017
  • Full Graphic Smart Controller Hacks
    0, 1, 255, 255, 255, 252, 0, 0, 1, 252, 0, 0, 0, 1, 248, 0,
    4 KB (273 words) - 00:00, 3 August 2015
  • Huxley
    1) Part 1 Frame Assemblies [http://www.youtube.com/user/RepRapLogPhase#p/u/6/vO1mSThu 2) Frame Integration Part 1 [http://www.youtube.com/user/RepRapLogPhase#p/u/4/ItHOGWUxghc]
    15 KB (2,299 words) - 05:46, 7 September 2015
  • Cyrus
    {| border="1"
    570 bytes (55 words) - 17:16, 10 April 2013
  • Laser Build Speed Calculator
    var out = '<table border="1"><tr><th>Results</th></tr>'; var passtime = cubes * ( 1 - fillfactor ) * depth / getValue('max_beam_speed'); // Time to pass cubes
    41 KB (5,323 words) - 20:36, 27 December 2014
  • Cubex to RepRap Conversion
    ...supply etc are replaced to produce a printer with a 300x300mm heated bed, 1, 2 or 3 hot-ends, a 24V power supply for the heated bed and electronics and
    7 KB (1,045 words) - 06:20, 2 March 2017
  • Development Pathway
    In particular, "3.1.3 Technological innovations" and "Appendix C". * extended auxiliary tools (Erik de Bruijn, "On the viability ..."; "3.1.3 Technological innovations")
    19 KB (2,841 words) - 18:46, 2 December 2022
  • PourStrap
    fixtures and rods, and you need to align them with 1-2-3 blocks, lego fixtures, 2 embedded nuts, 1 embedded rail + 1 throughhole, etc. Call
    10 KB (1,537 words) - 10:56, 18 February 2013
  • Joints for Delta Printer
    E.g. a backlash of 0.1 mm in joints can misalign the nozzle up to 1 mm (PositioningError = 2 x Backlash * RodLength / JointDistance) ...eltaJoints-Magnetic_Example_1.jpg|300px|thumb|right|Magnetic Joint Example 1]]
    9 KB (1,441 words) - 19:35, 3 February 2016
  • Combinatorics Problem
    User 1 uses w0, x0, y0, z0.
    9 KB (1,325 words) - 16:52, 12 June 2021
  • RUG/Danmark
    Lynddahl ABS Filament, a minimum of 2000m, price about 1,20kr per meter, roughly 20€/kg (at about 125m per KG) they are willingly
    3 KB (492 words) - 12:53, 25 November 2015
  • BEEF
    {| class="wikitable" border="1" ! Extruder 1
    9 KB (1,409 words) - 15:56, 2 September 2014
  • G-code
    | 1.23+ || The G-code is supported by version 1.23 and above. :RepRapFirmware version 1.19 and later (except within quoted strings)
    535 KB (81,549 words) - 15:50, 18 April 2024
  • Ceramic Extrusion
    ==Claystruder 0.1 (Stepper Driven Plunger)== ...p://www.fabathome.org/wiki/index.php/Model_1_1-Syringe_Tool Fab@Home Model 1 Syringe Tool] or with a more standard rotational stepper. Examples of the l
    14 KB (2,240 words) - 01:34, 19 April 2014
  • Generation 4 Electronics
    * Motor 1: untested =====Version: 1.1=====
    4 KB (441 words) - 03:52, 1 January 2012
  • Vaporware Electronics
    ...eprap.org/read.php?4,57039], fullspeceng[http://forums.reprap.org/read.php?1,26026] ) .../jeelabs.net/projects/tosca/wiki/Tosca_SSB_01 Tosca Single Stepper Board 0.1] is specifically designed to produce coordinated motion for desktop CNC mac
    11 KB (1,564 words) - 14:24, 15 January 2015
  • SLS Printer
    =Photo 1= first tests building a powder-based stereolithography printer: part 1
    14 KB (2,481 words) - 12:08, 28 October 2013
  • SGBot
    http://dev.forums.reprap.org/read.php?1,36581 [[Image:sg_bot1.jpg|frame|caption 1]]
    4 KB (693 words) - 23:55, 19 November 2013
  • Cyberdyne Hydraulic Control System
    ...s using a linear actuator to drive a syringe via another syringe at a 1 to 1 ratio. The purpose of this is to separate the heavy power source and the dr ...nhill battle from here. I intend to have a working prototype of both the T-1 and the Hydraulic Control System by May of 2010."
    3 KB (475 words) - 13:54, 25 November 2011
  • Cyberdyne T-800
    ...Competitor discussed in the Team Cyberdyne Forum thread, the [[Cyberdyne T-1]] and [[Cyberdyne Hydraulic Control System]] are necessary transitional mil From [[Cyberdyne T-1]]:
    2 KB (281 words) - 13:55, 25 November 2011
  • Cyberdyne T-600
    ...Competitor discussed in the Team Cyberdyne Forum thread, the [[Cyberdyne T-1]] and [[Cyberdyne Hydraulic Control System]] are necessary transitional mil From [[Cyberdyne T-1]]:
    2 KB (284 words) - 13:55, 25 November 2011
  • Step rates/de
    ...im Mikrometerbereich völlig unrealistisch, also machen 0,9°-Motoren und 1/32 Microstepping so gut wie keinen Sinn. Für die dabei auftretenden Kräft | 0,9°-Stepper, 14-Zähne-GT2-Pulley, 1/16 Microstepping
    11 KB (1,496 words) - 14:20, 1 May 2018
  • Mechanical Computer
    ...owered all-mechanical computer, which could also be considered a 6,000,000:1 scale model of a nano-computer." Suggests that a binary rod computer would
    5 KB (742 words) - 16:21, 2 December 2022
  • Mendel Variations/Catalyst
    **'''Inner Plate (1 x 2)''' **'''Outer Plate (1 x 2)'''
    8 KB (1,185 words) - 00:33, 5 March 2012
  • BowenBot
    ...tic discs connected to 4 inch nylon webbing. The conveyor is advanced by a 1 rpm AC gearhead motor. The webbing is stretched using a tensioning device a
    918 bytes (146 words) - 20:09, 8 February 2011
  • Sarrus Z Linkage
    Drill out all the small holes with a 1/16" drill bit, then use 1/16" brass rod to make hinge pins. ...0, 1/4 turn, 1/2 turn, and 3/4 turn, perhaps 8 chains at 0, 1/8, 1/4, 3/8, 1/2, 5/8, 3/4, and 7/8 turn? Or perhaps 6 chains vaguely similar to a [[Delta
    5 KB (734 words) - 10:13, 3 November 2013
  • Hydra-MMM Software and Firmware
    G30 - set reference point 1 G31 - return to reference point 1
    11 KB (1,833 words) - 06:52, 18 July 2015
  • Firmware/Constant Acceleration
    c = c - (2c / (4n + 1)) [Equation 13] n += 1
    4 KB (602 words) - 15:31, 5 June 2015
  • WolfStrap/de
    http://dev.forums.reprap.org/read.php?1,37355 ...m Bohrer gemacht. Da die Bohrer nie sehr genau sind, wird die Bohrung ca 3,1-3,2 mm. Die Bohrung in dem Teflonteil, dem Isolator, habe ich nur mit 2,8 g
    24 KB (3,931 words) - 23:40, 5 February 2024
  • Sarrus L04
    : ''Main page: [[RepRapServo 1 0]]'' Needs position feedback. Options: 1. Linear strip and quadrature sensor (scavenged from inkjet printers). 2.
    1 KB (151 words) - 00:23, 10 November 2010
  • Pololu Electronics
    ...Pololu-electronics'''. They are single sided, have no tracks thinner than 1.27mm (0.05"), and have no tracks running between pins, so they are reasonab [http://rapatan-rapatan.blogspot.com/2010/05/rapatan-shield-board-1-electronics-v10.html] Rapatan_Shield_base_board_V1.0
    20 KB (3,299 words) - 23:41, 5 February 2024
  • Wolfy1.1
    {{Languages|Wolfy1.1}} {{RepRapNavigation|name=Wolfy1.1}}
    2 KB (202 words) - 09:16, 26 March 2015
  • WolfStrap
    ...translate.google.co.uk/translate?js=n&prev=_t&hl=en&ie=UTF-8&layout=2&eotf=1&sl=de&tl=en&u=http%3A%2F%2Freprap.org%2Fwiki%2FWolfStrap page] http://dev.forums.reprap.org/read.php?1,37355
    24 KB (4,237 words) - 07:02, 3 September 2019
  • Kiwi-M5 Mendel Battle Tank
    |feedurl=http://forums.reprap.org/feed.php?151,69770,replies=1,type=rss ...could be bolted on the edge using 4 mm bolts, this then gives each bearing 1.5 mm exposure on each side of the 10mm sheet pieces. (See pictures of Y and
    35 KB (5,908 words) - 00:54, 21 April 2013
  • RepRap project FAQ
    {|border="1" ...ers work on a principle of pushing a 3mm rod of plastic through a heated 0.1-0.5mm wide orifice. Although there is work being done on an extruder which
    22 KB (3,459 words) - 11:28, 22 May 2017
  • RepRap Life Cycle Assessment
    ...in the report called: "[http://www.google.dk/url?sa=t&source=web&ct=res&cd=1&ved=0CAYQFjAA&url=http%3A%2F%2Fwww.americanchemistry.com%2Fs_plastics%2Fsec ...or PLA is taken from: "[http://www.google.dk/url?sa=t&source=web&ct=res&cd=1&ved=0CAgQFjAA&url=http%3A%2F%2Fwww.natureworksllc.com%2Four-values-and-view
    8 KB (1,258 words) - 04:30, 29 October 2012
  • Polar
    *http://dev.forums.reprap.org/read.php?1,38704 except the position is higher up 1 screw thread increment (Z). Then we don't need a separate Z motor.
    8 KB (1,430 words) - 12:26, 21 September 2015
  • MultiRep
    ...designing my latest creation, the MultiRep Mark 8. What happen to versions 1-7 you ask? Well, most of them were "learning" experiences. I actually got f
    7 KB (1,126 words) - 01:57, 25 November 2014
  • Molding Mendel Parts
    * ~250 g of polymorph, you can get 1 kg of Polymorph somewhere around 20$ * Put some water on the bottom of a pot. I filled somewhere 1,5 - 2 cm.
    4 KB (757 words) - 10:45, 27 October 2010
  • Release Agent
    {| border="1" {| border="1"
    838 bytes (100 words) - 03:39, 19 March 2010
  • RepRap II "Мендель"
    ...(?)(feature) 2 мм, точность позиционирования 0,1 мм, толщина слоя 0,3 мм
    6 KB (147 words) - 05:16, 2 October 2014
  • Конструирование электрической части
    4 KB (135 words) - 04:43, 26 November 2011
  • Монтаж проводов
    Start by wiring up the 12-volt power cables. You'll need 1.1 m of twin wires. ...tely above is looking into the socket (female) and at the pins (male). Pin 1 is the ground (negative) connection and pin 2 is +12v connection. Pin 3 is
    7 KB (1,085 words) - 23:53, 5 February 2024
  • Laser Cutter/de
    1 Watt 'pigtail' Diodenlaser mit Fokussier-Optik, verschiedene Laserdioden bi 1. Laser-Quellen:
    8 KB (979 words) - 17:27, 25 December 2019
  • AlreadyDoneList
    * [http://reprap.org/Downloads/extruder/extruder.html Version 1 of a Polymorph Extrusion Head] designed for rapid prototyping production (A
    4 KB (634 words) - 15:44, 7 October 2012
  • Arduino GCode Interpreter
    This variable stores how many steps to take to move the X axis 1 inch. You will need to set this as accurately as possible if you want your ..."-20 threaded rod means that there are 20 threads per inch (aka 20 turns = 1 inch.) Simply take that number and multiply it by the steps in a revolutio
    6 KB (939 words) - 06:33, 11 January 2015
  • AssemblingDarwinElectronics
    {| border="1" ...pper exerciser window is useful for this.) Get the platform to stop about 1 mm below the nozzle.
    9 KB (1,621 words) - 09:45, 14 December 2014
  • AssemblingDarwinMachinery
    ...m the home positions the axes can achieve repeatable movements to within 0.1 mm. You'll need a good bit of bench space, something in the region of 1 m x 2 m should be fine. At least half a meter square of this space should b
    50 KB (8,709 words) - 12:15, 28 January 2013
  • BOM Notes
    * The toothed pulleys supplied by McMaster fit a 1/4" shaft. For the Y and Z axes, these need to be bored out to 8mm. The X pu * On the generation 1 extruder board, the value of C3 should be 100nF for normal operation. Also
    1 KB (216 words) - 19:50, 26 November 2011
  • Wealth Without Money
    {| border="1" * 1. The number of them in existence and the wealth they produce can grow expon
    11 KB (1,864 words) - 07:42, 7 March 2016
  • BuildingAStripboardExtruderController
    {{Deprecated|DarwinExtruderController 1 2}} * C1: 1&mu;F electrolytic or tantalum capacitor(*)
    8 KB (1,325 words) - 20:07, 26 November 2011
  • Building A Stripboard Stepper Controller
    {{Deprecated|DarwinExtruderController 1 2}} * A piece of stripboard with 2.54mm (0.1") spaced continuous track. It should be a minimum of 23 holes along the tr
    7 KB (1,090 words) - 06:34, 29 November 2014
  • Builders/Config Methods/cs
    == Chyba v GCode firmwaru 1.4 při použití DC motorů == #define EXTRUDER_0_STEP_ENABLE_PIN (byte)-1
    3 KB (564 words) - 16:22, 1 March 2014
  • BuildingTheStepperMotorControlBoards
    {| border="1"
    2 KB (257 words) - 20:09, 26 November 2011
  • CSGOffsetting
    ...stage as (virtually) dunking the part as-designed in acid and melting away 1/2 the width of the extrusion, creating a smaller "core". ...he (virtual) "core", the plastic expands to 1/2 the width of the extrusion(1) in every direction from that point, enough to (hopefully) touch the origin
    4 KB (588 words) - 05:11, 19 July 2015
  • CartesianAssemblyFAQ
    == 1. General Questions ==
    2 KB (270 words) - 06:22, 27 November 2011
  • CartesianBot SNAP V1
    = Cartesian Robot SNAP Protocol Version 1 =
    487 bytes (67 words) - 06:34, 11 January 2015
  • CheltenhamScienceFestival2008Do-list
    {| border="1"
    960 bytes (128 words) - 19:57, 26 November 2011
  • DC digital servomotor
    === 1. Introduction ===
    6 KB (1,035 words) - 06:45, 13 May 2016
  • DC Motor Driver 1 0
    {{Deprecated | DC Motor Driver 1 1}} ...et/project/downloading.php?group_id=159590&filename=reprap-dc-motor-driver-1.0-r1.zip download the release file] from SourceForge that has a bunch of he
    16 KB (2,496 words) - 10:31, 8 June 2013
  • DC Motor Driver 1 1
    You can [http://downloads.sourceforge.net/reprap/reprap-dc-motor-driver-1.1.zip?use_mirror=osdn download the release file] from SourceForge that has a {| border="1"
    17 KB (2,658 words) - 13:05, 24 June 2014
  • DarwinConceptImprovements
    {| border="1"
    2 KB (374 words) - 09:37, 26 November 2011
  • DarwinDesignFaults
    {| border="1"
    1 KB (203 words) - 09:37, 26 November 2011
  • DarwinExtruderController
    {{Deprecated|DarwinExtruderController 1 2}} = Extruder Controller Board - v1.1 =
    12 KB (1,936 words) - 00:20, 12 September 2013
  • Extruder Controller Board v1.2
    {| border="1" | R1 || 10K ohm || 1 || [[Resistor|Resistor]] || [http://www.mouser.com/search/productdetail
    14 KB (2,352 words) - 17:21, 29 October 2015
  • Opto Endstop v1.0
    {{Deprecated|Gen7 Endstop 1.3.1}} You can [http://downloads.sourceforge.net/reprap/reprap-opto-endstop-1.0.1b.zip?modtime=1181187177&big_mirror=0 download the electronics files fro
    7 KB (1,036 words) - 15:24, 23 July 2015
  • DarwinPartDevelopment
    {| border="1" ...ropped. || [[[[image:DarwinPartDevelopment-Bed-corner-1.1.stl|Bed-corner-1.1.stl]] |thumb]]
    6 KB (577 words) - 09:39, 26 November 2011
  • DarwinPowerAndCommunicationsCard
    = Power Distribution and Communications Board - v1.1 = {| border="1"
    16 KB (2,457 words) - 09:39, 26 November 2011
  • DarwinPowerAndCommunicationsCardTest
    {| border="1" ...uniqueparts/id/57/bjtemplate/blank" width="100%" height="400" frameborder="1"></iframe>
    13 KB (2,131 words) - 09:40, 26 November 2011
  • Power Distribution and Communications Board v1.2
    ==== v1.2.1 ==== You can [http://downloads.sourceforge.net/reprap/PowerComms-1.2.zip?modtime=1180374732&big_mirror=0 download the electronics files from S
    15 KB (2,450 words) - 04:46, 25 July 2015
  • DarwinStepperController
    {{Deprecated|DarwinExtruderController 1 2}} {| border="1"
    3 KB (430 words) - 20:08, 26 November 2011
  • Stepper Motor Controller Card v1.2
    {| border="1" {| border="1"
    6 KB (890 words) - 04:51, 25 July 2015
  • DeviceMessages
    {| border="1" | Reply: || 1 byte: Minor version <br/> 1 byte: Major version
    2 KB (238 words) - 06:35, 11 January 2015
  • DocumentationMain
    * [[McWire Cartesian Bot 1 2]] * [[SupportExtruder_1_0|Support Extruder v0.1]] - our new support material extruder
    12 KB (1,622 words) - 05:39, 4 September 2015
  • Electrochemical Machining
    |feedurl=http://forums.reprap.org/feed.php?35,83032,replies=1,type=rss ...ap moves axes with a M8 threaded rod, so very slow movement speeds, like 0.1&nbsp;mm/min are possible.
    18 KB (2,902 words) - 10:27, 4 November 2013
  • EndMatching
    ...ber, it backtracks (to the immediately-previous point that generated E<sub>1</sub>) and replaces all the little line segments in between with that one l
    7 KB (1,250 words) - 05:11, 19 July 2015
  • ExtruderController
    * 1 byte: Response type (0) * 1 byte: minor version number
    4 KB (545 words) - 06:36, 11 January 2015
  • ExtruderIO
    ...the I/O of the [[DarwinExtruderController 1 2]], part of the [[Generation 1 Electronics]] originally designed for the first version of [[RepRapOneDarwi VREF = 1.25 + 5 * VR / 32
    20 KB (3,214 words) - 02:37, 4 March 2014
  • ExtruderImprovementsAndAlternatives
    ...i gear-bush-holder.aoi file] that is in two parts called holder-no-support-1 and ...ainst the surface of the PTFE. Using a small electric hand drill, drill a 1.5mm diameter hole through the PTFE along a chord (i.e. not along a diameter
    19 KB (3,267 words) - 16:49, 28 November 2011
  • Extruder Controller 2 0
    The outputs are labeled Motor 1 and Motor 2. Each motor has an A and B output. There are also LEDs associ {| border="1"
    18 KB (2,967 words) - 20:19, 26 November 2011
  • Extruder Controller 2 1
    = Extruder Controller v2.1 = The reset button on the Extruder Controller v2.1 board is broken. If you have this board, you will need to manually reset i
    31 KB (5,027 words) - 20:19, 26 November 2011
  • Extruder Controller 2.2
    {| border="1" | 1A || H-bridge Positive #1 || Motor 1
    35 KB (5,524 words) - 18:33, 18 November 2014
  • Extruder SNAP V1
    = Extruder Controller SNAP Protocol Version 1 = * 1 byte status (0=full, 1=empty)
    2 KB (225 words) - 06:36, 11 January 2015
  • Old RepRap project FAQ
    * R2 1.5K Resistor ...massive figure for V/m. My rule of thumb is to go for a voltage at least 1.5 times the maximum that they will experience in circuit. "Working voltage
    26 KB (4,452 words) - 14:31, 29 February 2012
  • FillerMaterials
    1)Sand, sand dust
    721 bytes (106 words) - 20:18, 28 February 2014
  • Firmware build process
    ...irmware build process for Darwin hardware using PIC 16F648 in [[Generation 1 Electronics]]. make[3]: *** [pobj.o ] Error 1
    4 KB (586 words) - 11:46, 4 May 2012
  • Gear design
    ...etween teeth is notionally along a point just over half way (typically a 1:1.25 split) up the teeth, and this is called the 'Pitch Line'. The bit above ...st Common Divisor (GCD) of each gear tooth count equals 1. e.g. GCD(16,25)=1
    12 KB (2,042 words) - 21:54, 26 October 2015
  • GearMotorStepper
    ...achieved so far appears to be about 7.5 degrees. For a threaded rod with a 1 mm pitch that gives us a resolution of 0.021 mm.
    2 KB (396 words) - 12:49, 30 April 2014
  • GearedBoxForGM3Motor
    ...deatils a design to gear the Solarbotics GM3 motor down by approximately 3:1.
    246 bytes (34 words) - 05:07, 17 December 2011
  • Generation 1 Electronics
    = Generation 1 Electronics = [[Category:Generation 1 electronics| ]]
    4 KB (659 words) - 15:27, 23 July 2015
  • Generation 1 firmware
    [[Category:Generation 1 firmware| ]]
    868 bytes (109 words) - 15:18, 28 August 2015
  • Generation 2 Electronics
    ...google.com/p/sanguino/downloads/detail?name=reprap_motherboard-electronics-1.0.zip&can=2&q= Sanguino RepRap Motherboard] that makes the connections easi === DC Motor Driver v1.1 ===
    14 KB (2,223 words) - 09:27, 26 November 2011
  • Generation 2 firmware
    ...> there is a line that says <tt>#define EXTRUDER_COUNT 1</tt>. Change the 1 to 2 if you have two extruders. ...f the number of steps of the stepper motors that your RepRap does to cover 1 mm. Change these if need be. If you are not sure exactly what the gearing
    16 KB (2,592 words) - 06:53, 18 July 2015
  • Generation 3 Electronics
    * 1 [[Motherboard_1_2|RepRap Motherboard]] (''mendel/electronics/motherboard'') * 1 [[Mendel USB and power connector]] (no Eagle design - it's a simple piece o
    10 KB (1,606 words) - 20:53, 19 February 2012
  • Glossary
    * Plastic material made into (often 3 mm or 1.75mm) string to be used as raw material in 3D printers. * Extruded plastic (often < 1 mm).
    17 KB (2,735 words) - 22:34, 1 May 2024
  • PSMD Triple Axis Stepper Driver
    ...laining the settings. The options are Full-stepping, 1/2, 1/4, 1/8th , and 1/16th microstepping.<br/>
    4 KB (586 words) - 05:56, 29 November 2014
  • Gputils
    ...ls for the Microchip (TM) PIC microcontrollers. The version marked 0.13.4-1 in the Ubuntu and Debian repositories seem to share a common flaw, so we've ...rce package with <tt>wajig source gputils</tt>, fetching the latest 0.13.4-1 files from the gputils repository on SourceForge with
    968 bytes (146 words) - 18:38, 26 November 2011
  • Half-roundWasherBearing
    ==== 1. Summary ==== ...me workshops. Fortunately, a servicable alternative can be made from M3 or 1/8 inch washers.
    3 KB (434 words) - 05:08, 17 December 2011
  • HandmadeGears
    ...gnment holes. Remove the clamp and bolt. Mark the sheets from the top down 1,2,3 & 4 with an indellible marker, as in the image on the right (note: some Using an 8mm drill bit drill out the centre holes on sheets 1 & 4. This will allow an M8 bolt or section of rod to go through the mould,
    4 KB (722 words) - 17:03, 28 November 2011
  • HighTemperatureMaterials
    After 3 1/2hrs, the stuff still isn't set. This batch is much slower for no obvious r ...r 10c a piece...) to allow it to be threaded onto the heater barrel. After 1/2hr the plaster was shaped with a rasp to remove unwanted protrusions.
    10 KB (1,794 words) - 19:25, 26 November 2011
  • HintsForUsingTheStratasysDimensionRPMachine
    1) The download for the full 30-page manual which will walk you through the c ==== 1. MANUAL DOWNLOAD ====
    6 KB (786 words) - 17:11, 28 November 2011
  • HyperbolicSpeed
    For example, a speed value of 255 will wait for a period of 256 - 255 = 1 time unit between each step or pulse. ...at a speed of 255 is twice as fast as a speed of 254. A PIC speed of 0 is 1/256th as fast as 255.
    3 KB (525 words) - 06:36, 11 January 2015
  • IOBox
    * 1: Set outputs {| border="1"
    1 KB (187 words) - 17:17, 28 November 2011
  • PIC in-circuit programming
    [[Category:Generation 1 electronics]]
    3 KB (495 words) - 15:28, 23 July 2015
  • InterchangeableNozzleMk2
    ...drill bit. Drill your nozzle's hole into the bottom of this hole, going in 1.5mm-2mm. As the drill bit does not emerge from the other side of the rod ye Screw the rod into that M6 nut about 1/3 the way down it leaving the little hole and untidy sawn-off end pointing
    6 KB (996 words) - 17:24, 28 November 2011
  • InvoluteProfile1
    Suppose that you want to design a 3:1 ratio gear pair. Using the 3:1 proportion you then need to apply that proportion to deciding the radii of ...Distance''' measure gives the thickness of the gear. The default value is 1 mm. Set it to 10 mm for this example. '''Again don't try to do anything u
    6 KB (960 words) - 08:01, 2 January 2015
  • ItemsMade
    {| border="1" width="100%" cellpadding="2" cellspacing="2" [[image:ItemsMade-wades-parts-1-small.JPG|thumb]]
    7 KB (1,195 words) - 08:01, 2 January 2015
  • LaserjetTonerTransfer
    {| border="1" {| border="1"
    4 KB (719 words) - 02:48, 29 December 2014
  • MCodeReference
    {| border="1" ...ntly-selected extruder's stepper power. With an S field for values of 0 to 1, for example M113 S0.7 causes the PWM to be set to the S value. M113 S0 tur
    5 KB (750 words) - 06:37, 11 January 2015
  • MagServo
    === 1. Characteristics === ...al - I did this by eye using a stand magnifier and tweezers - and have pin 1 next to the +5v rail and on the side of the 4-pin connector.
    11 KB (1,962 words) - 06:47, 13 May 2016
  • Magnetic Rotary Encoder v1.0
    ...s is the best encoder of any kind designed for RepRap -- see [[RepRapServo 1 0]] for an overview of various kinds of encoders. ...an [http://downloads.sourceforge.net/reprap/reprap-magnetic-rotary-encoder-1.0.zip?modtime=1211407665&big_mirror=0 download the electronics files from S
    21 KB (3,170 words) - 09:43, 22 May 2017
  • Make IDC Cables
    === Step 1: Insert Cable Into Connector === ...ing gray cable with a red index wire, line that index wire up with the Pin 1 indicator. In this example, that indicator is the manufacturer's mark, 'Be
    3 KB (470 words) - 05:15, 25 July 2015
  • Print It Forward
    {| border="1" |$1,000,000,000
    3 KB (455 words) - 03:59, 10 June 2022
  • Managing your filament
    ...dinary SAE 30 oil, the stuff you use on hinges and the kid's bike or "3-in-1" type products are fine.
    3 KB (441 words) - 11:35, 16 April 2016
  • MaterialsScience
    ...scholar?hl=en&safe=off&q=fabrication+of+ceramic+parts+using+mold+sdm&spell=1 ...ggregate - silica or zircon sand. The process is repeated to build up the 1 to 2cm layer. The ceramic shell is then placed in a furnace to burn out th
    12 KB (1,822 words) - 13:14, 21 February 2013
  • McWireCartesianBot 1 0
    ...f component specifications work: #10-24 x 3/4" screws, 3/4" x 3/4" rails, 1/4" acrylic, etc.
    4 KB (673 words) - 11:46, 28 November 2012
  • McWire Cartesian Bot 1 2 (Death March: Do not build!!!)
    * [http://downloads.sourceforge.net/reprap/reprap-mcwire-cartesian-bot-1.2.1.zip?modtime=1200886076&big_mirror=0 Download the files from SourceForge]. ...the supports pictured are 1/16" thickness. It's highly recommended to use 1/8" thickness from McMaster.com'''
    37 KB (6,065 words) - 05:11, 8 September 2013
  • MeasuringThermistorBeta
    ...\frac{\ln\left ( \frac{R}{R_{0}} \right )}{(\frac{1}{T + 273.15}) - (\frac{1}{T_{0} + 273.15})}</math> <math>R_{Z} = R_{0}\exp \left ( \beta \left ( \frac{1}{273.15} - \frac{1}{T_{0} + 273.15} \right ) \right )</math>
    6 KB (933 words) - 06:20, 30 December 2014
  • MediaMain
    ...ef=&CJURL=&CJID=2617611], one of the top "products" released on 2013 April 1.[http://lifehacker.com/5992871/your-2013-april-fools-day-prank-spoiler] * [http://www.nytimes.com/2011/01/13/technology/personaltech/13basics.html?_r=1&src=busln New York Times article on 3D printing and RepRap]
    23 KB (3,218 words) - 09:08, 12 December 2014
  • Modules
    == Protocol Version 1 == * 1 byte: Response type (0)
    2 KB (318 words) - 06:04, 28 June 2014
  • Motherboard 1 1
    = Motherboard v1.1 = See [http://objects.reprap.org/wiki/Hacks_to_the_RepRap_Motherboard_v1.1 here in the Builder's Wiki] for hacks to this board.
    26 KB (4,326 words) - 20:17, 26 November 2011
  • Motherboard 1.2
    You can [http://downloads.sourceforge.net/reprap/reprap-motherboard-1.2.zip download the release file] from SourceForge that has a bunch of helpf [[File:Motherboard_1.2_schematic.png|200px|||Motherboard 1.2 Schematic]]
    29 KB (4,833 words) - 18:34, 18 November 2014
  • OptoEndstop 2 0
    {{Deprecated|Gen7 Endstop 1.3.1}} You can [http://downloads.sourceforge.net/reprap/reprap-opto-endstop-1.0.1b.zip?modtime=1181187177&big_mirror=0 download the electronics files fro
    6 KB (986 words) - 09:44, 2 October 2012
  • OptoEndstop 2.1
    {{Deprecated|Gen7 Endstop 1.3.1}} {{Languages|OptoEndstop 2.1}}
    16 KB (2,480 words) - 09:52, 14 December 2014
  • Opto Isolator v1.0
    You can [http://downloads.sourceforge.net/reprap/reprap-opto-isolator-1.0.zip?use_mirror=osdn download the electronics files from Sourceforge]. With IDC cables, the <font color="red">red</font> pin generally denotes pin 1. The pins are counted up from that pin until reaching the other side of the
    9 KB (1,366 words) - 04:57, 25 July 2015
  • PC Power Supply
    ...d on the +5&nbsp;V rail cause the PSU to shutdown, some base load (approx. 1&nbsp;A) is required. ...s in the top left. The number proceeds left to right across the top (pins 1 to 10) and then left to right across the bottom (pins 11 to 20).
    15 KB (2,602 words) - 21:34, 24 November 2023
  • PIC16F628
    [[Category:Generation 1 electronics]]
    269 bytes (38 words) - 15:07, 23 July 2015
  • PIC16F648
    [[Category:Generation 1 electronics]]
    1 KB (176 words) - 15:06, 23 July 2015
  • PICCommsLibrary
    [[Category:Generation 1 firmware]]
    117 bytes (14 words) - 15:16, 28 August 2015
  • PIC firmware build
    [[Category:Generation 1 firmware]]
    3 KB (458 words) - 15:16, 28 August 2015
  • PIC programmer
    [[Category:Generation 1 electronics]]
    480 bytes (70 words) - 05:11, 25 July 2015
  • PLA
    * http://forums.reprap.org/read.php?1,120309 . Some recommend unloading PLA from the printer when idle. ...e seen after baking. One coil went from 120.5 grams to 120.0 grams (almost 1/2%).
    15 KB (2,346 words) - 16:50, 3 January 2021
  • PTFE
    {| border = "1" |1,900
    3 KB (474 words) - 16:52, 3 January 2021
  • PWM Driver 1 0
    ...oject/downloading.php?group_id=159590&filename=reprap-freeduino-pwm-driver-1.0.zip download the release file] from SourceForge that has a bunch of helpf {| border="1"
    14 KB (2,230 words) - 20:21, 26 November 2011
  • PWM Driver 1 1
    = PWM Driver v1.1 = # [http://store.makerbot.com/electronics/electronics-kits/pwm-driver-v1-1-kit.html Buy the full kit (components + PCB) from MakerBot Industries]
    15 KB (2,310 words) - 10:17, 15 July 2012
  • Reachout
    There also is a forum http://forums.reprap.org/read.php?1,63448 for discussing this stuff. ...ur town organized for the Software Freedom Day. Purpose of this material: (1) Draw attention to the table with the RepRap Mendel, (2) give some basic in
    2 KB (424 words) - 14:19, 27 February 2014
  • Java Software Legacy Preferences
    === BackColourB(0..1)=0.9, BackColourG(0..1)=0.9, BackColourR(0..1)=0.9 === === FastSpeed(-1..255)=240 ===
    11 KB (1,614 words) - 15:28, 26 November 2011
  • PhilosophyPage
    ===== 1. Introduction ===== ...ament deposition modelling (FDM), and the MIT powder/ink-jet-glue process [1].
    29 KB (4,754 words) - 20:35, 26 September 2012
  • PhotoResistTransfer
    {| border="1" {| border="1"
    8 KB (1,420 words) - 02:52, 29 December 2014
  • PlywoodRepRaps
    ...iting (4th April 2008), our design requires 2 x P3 sheets of technoply and 1 x P3 sheet of 9mm MDF. The whole lot cut, taxed and shipped costs about US$
    4 KB (575 words) - 08:36, 30 December 2014
  • Polycaprolactone
    Boil about 1 litre of water in the kettle, put the granules in the beaker, and pour boil ...ee thare are minor differences around wavenumbers of 1100 and 3600 cm<sup>-1</sup>. I suspect that this is just a difference in molecular weight.
    12 KB (1,857 words) - 11:46, 9 July 2018
  • PonokoBOM
    ...at would be here: http://reprap.org/bin/rdiff/Main/PonokoBOM?rev1=1.9&rev2=1.8 . 1 2200mm of 4.5mm ball chain
    7 KB (1,012 words) - 13:45, 29 November 2011
  • PonokoBOMcode
    {| border="1" repeat = 1
    3 KB (408 words) - 13:46, 29 November 2011
  • PonokoCornerAssembly
    * 1 off M8 washer, * 1 off 608 ZZ Ball bearing race.
    3 KB (512 words) - 13:46, 29 November 2011
  • PonokoExtruderAssembly
    ...e feed hole. If the feed hole is rough or too tight, ream it with a 3mm or 1/8" drill. Yours should look a lot like this. A gently tapering tip about 1.5mm wide at the end.
    27 KB (4,707 words) - 13:48, 29 November 2011
  • PonokoExtruderAssemblyBOM
    1 0.1uF capacitor 1 200-300mm of nichrome wire with a resistance of about 8 ohms
    781 bytes (127 words) - 13:49, 29 November 2011
  • PonokoXAxisAssembly
    * 1 off M3x20 screw
    6 KB (1,014 words) - 13:51, 29 November 2011
  • PonokoZFrameAssembly
    * 1 off M8 half- or press-nut
    7 KB (1,280 words) - 13:52, 29 November 2011
  • Power Distribution and Communications Board v1.3
    You can [http://downloads.sourceforge.net/reprap/reprap-powercomms-1.3.0.zip?modtime=1194882229&big_mirror=0 download the electronics files from These are the 1.8K ohm resistors. They can be soldered in any orientation.
    22 KB (3,564 words) - 04:47, 25 July 2015
  • Printing materials
    (from http://forums.reprap.org/read.php?1,70471) 1) They have to have a long work time, meaning that they have to remain fluid
    10 KB (1,550 words) - 22:11, 8 November 2021
  • Programming a PIC
    [[Category:Generation 1 electronics]]
    3 KB (445 words) - 15:11, 23 July 2015
  • PrototypePrinter
    ...er turntable, which is raised and lowered by another stepper motor via a 3:1 reduction gearing and threaded rod. The turntable is rotated by another stepper motor via a 57:1 worm gear. An index to its rotation is provided by a simple magnetic reed s
    4 KB (672 words) - 13:53, 29 November 2011
  • RPOrders
    {| border="1" | 1 || [[[[image:RPOrders-railed_poly-holder.stl|railed_poly-holder.stl]] ||
    1 KB (158 words) - 15:49, 4 January 2015
  • RelatedSites
    ...http://www.flickr.com/photos/jeriellsworth/2835524263 DIY chip manufacture 1], [http://www.flickr.com/photos/jeriellsworth/2835459827 DIY chip manufactu ...uild-your-own-cnc-machine-part-1/ How to build your own CNC mnachine (Part 1)], [http://www.engadget.com/2006/07/04/how-to-build-your-own-cnc-machine-pa
    10 KB (1,422 words) - 04:17, 21 July 2017
  • RepRapDeveloperInstallLinux
    Go to the [http://java.sun.com/j2se/1.4.2/download.html Sun Java Downloads Page]. To start with you want The J2S ...compresed tarball (which will be called something like <tt>eclipse-SDK-3.2.1-linux-gtk.tar.gz</tt>) in your home directory.
    17 KB (2,835 words) - 05:20, 19 July 2015
  • RepRap electronics systems
    ...Serial converter cable. Either way works the same. Within the Generation 1 electronics, the boards communicate via a token ring which the host compute ...nterface, regardless of the electronics driving them. Both the generation 1 and 2 electronics have been designed to accept and control the same electro
    5 KB (729 words) - 15:17, 23 July 2015
  • Reprap host software
    1. All below the slice - add that triangle to the triangulation of the bit al
    13 KB (2,177 words) - 05:27, 19 July 2015
  • RepRapLinuxSoftware
    ...ed file via sudo. If you haven't already done so, to quickly download 1.5.1, then run it: $ cd ~ ; wget http://download.java.net/media/java3d/builds/release/1.5.1/java3d-1_5_1-linux-i586.bin
    11 KB (1,755 words) - 11:38, 22 July 2015
  • RepRapLogo
    {| border="1" cellspacing="0" cellpadding="5" style="border-collapse: collapse;"
    3 KB (396 words) - 18:54, 13 November 2013
  • RepRap microcontroller software
    == Generation 1 Firmware ==
    2 KB (246 words) - 07:07, 18 July 2015
  • RepRapOneDarwin
    = How to build RepRap 1.0 "Darwin" = RepRap 1.0 "Darwin" is a rapid prototyping machine that is capable of making the maj
    16 KB (2,446 words) - 02:11, 23 May 2015
  • RepRapOneDarwin2
    = RepRap 1.0 "Darwin" = RepRap 1.0 "Darwin" is a rapid prototyping machine that is capable of making the maj
    12 KB (1,963 words) - 18:18, 26 November 2011
  • RepRapServo 1 0
    The spatial wavelength is about 1/8", so you could make a handy position sensor or linear stepper out of it.
    17 KB (2,710 words) - 17:33, 16 May 2016
  • RepRap software preferences documentation
    ...<noautolink>BackColourG(0..1)=0.9</noautolink>, <noautolink>BackColourR(0..1)=0.9</noautolink> ==== ...under the object being built before building proper starts. Set this to -1 to suppress the laying down of foundations.
    29 KB (4,225 words) - 18:18, 28 November 2014
  • RepRap software tweaking manual
    # Extruder0_OutlineSpeed(0..1) This is a direct fraction of the fastest possible XY speed above. # Extruder0_InfillSpeed(0..1) This is a direct fraction of the fastest possible XY speed above.
    9 KB (1,430 words) - 18:19, 28 November 2014
  • RepRapSpecifications
    {| border="1" {| border="1"
    3 KB (466 words) - 14:02, 29 November 2011
  • SNAPComms
    {| border="1" ==== Byte 1: Header Definition Byte #2 (HDB2) ====
    17 KB (2,637 words) - 15:20, 28 August 2015
  • Screw-drivenLinearAxis
    ==== Version 1 '''*DRAFT*''' ==== ====1. Summary ====
    12 KB (1,925 words) - 05:09, 17 December 2011
  • Screw-drivenLinearStage
    ==== Version 1 '''*DRAFT*''' ==== ====1. Summary ====
    4 KB (660 words) - 05:09, 17 December 2011
  • Separate page on the question
    ...nal real number line. It has integers - 1, 2, 3 etc; fractions - 0.5 0.73 1.98 etc, and irrationals like pi and e (the irrationals, interestingly, bein ...al. The interval [1, 2] is called a ''closed interval'' and the interval (1, 2) is called an ''open interval''. (The act of ''closure'' is turning an
    7 KB (1,106 words) - 14:08, 29 November 2011
  • ShowCase
    === Printer Concept 1: "Da Witch"/"Zaphod" ===
    9 KB (1,479 words) - 18:30, 26 November 2011
  • Moldmaking Tutorial
    [[image:SoftToolingForCasting-woods-cast-1.jpg|thumb]]
    16 KB (2,811 words) - 09:07, 13 September 2021
  • Spontaneous polymerization resin blends
    ...cellent materials as well as versatile. Some dual polymer mixes are in a 1:1 proportion or similar and could be counted in the auto-initiated sub-catego [http://www.sartomereurope.com/prodline.asp?plid=1 Monomers at Sartomer.com]
    2 KB (325 words) - 17:56, 8 November 2021
  • Stepper motor
    ...by the step angle gives the number of steps per revolution. For example, ''1.8° per full step'' is a common step size rating, equivalent to ''200 steps Most stepper motors used for a Mendel have a step angle of 1.8 degrees. It is sometimes possible to use motors with larger step angles,
    16 KB (2,597 words) - 17:19, 11 September 2021
  • Clone wars: Prusa iteración 3: Montaje del eje Z
    1) Colocamos el marco con la madera base en dirección contraria a nosotros (
    2 KB (315 words) - 05:43, 18 March 2014
  • All metal hotend
    1. Start with the nozzle :
    4 KB (677 words) - 17:56, 18 November 2014
  • Xpresso Smoothie
    * Breakouts for I2C, ADC: 1 pin, GPIO: 3 pins, and on-board Ethernet * Set jumper "mbed Power 1 Connect"
    7 KB (1,037 words) - 01:17, 9 October 2017
  • Stepper motor controller SNAP protocol
    ...ocuments the SNAP Protocol stepper motor controller used in the Generation 1 Electronics and Generation 2 Electronics. For more recent [[G-code]] protoc === [1] Set forward motion ===
    7 KB (992 words) - 15:36, 23 July 2015
  • LED Stepper Tester v1.0
    [[Category:Generation 1 electronics]]
    3 KB (493 words) - 04:52, 25 July 2015
  • Stepper Motor Driver 1.0
    ...tor Driver|next=Stepper Motor Driver 1.1|previous=UniversalControllerBoard 1.2}} ...net/project/downloading.php?group_id=159590&filename=reprap-stepper-driver-1.0-r1.zip download the release file] from SourceForge that has a bunch of he
    11 KB (1,914 words) - 20:14, 26 November 2011
  • Stepper Motor Driver 1.1
    {{Motor Driver|next=Stepper Motor Driver 1.2|previous=Stepper Motor Driver 1.0}} = Stepper Motor Driver v1.1 =
    24 KB (3,875 words) - 20:13, 26 November 2011
  • Stepper Motor Driver 1.2
    {{Motor Driver|next=Stepper Motor Driver 2.0|previous=Stepper Motor Driver 1.1}} # [http://reprapsource.com/en/show/6179 Stepper Motor Driver 1.2 Kit with RJ45 jacks from RepRapSource]
    24 KB (4,088 words) - 05:55, 29 November 2014
  • Stepper Motor Driver 2.0
    {{Motor Driver|next=Stepper Motor Driver 2.1|previous=Stepper Motor Driver 1.2}} .../ L298 combo. The A3977 is cheaper, uses better technology, offers up to 1/16th step, and is cheaper. The downside is that it only comes in PLCC or T
    1 KB (227 words) - 20:13, 26 November 2011
  • Stepper Motor Driver 2.1
    ...9] which is pin-compatible, but offered much higher step resolution, up to 1/16th stepping. Unfortunately the chip was only offered in the TSSOP packag ...the [http://downloads.sourceforge.net/reprap/reprap-stepper-motor-driver-2.1.zip?modtime=1231599740&big_mirror=0 design files on Sourceforge].
    1 KB (213 words) - 20:13, 26 November 2011
  • Stepper Motor Driver 2.2
    {{Motor Driver|next=Stepper Motor Driver 2.3|previous=Stepper Motor Driver 2.1}} {| border="1"
    13 KB (2,000 words) - 20:13, 26 November 2011
  • Stepper Motor Driver 2.3
    {| border="1" | 1 || N/C || Not Connected to anything
    22 KB (3,615 words) - 23:21, 3 February 2024
  • Build A Stripboard Bipolar Stepper Controller
    * C1 0.1&mu;F * C2 0.1&mu;F
    6 KB (906 words) - 05:09, 25 July 2015
  • Stripboard JDM PIC Programmer
    <font size="+1"><strong>Note: This is a preliminary design and has not yet been tested</st * R2: 1.5k&Omega; [[Resistor|Resistor]]
    7 KB (1,092 words) - 05:11, 25 July 2015
  • SubversionCommitGuidelines
    {| border="1"
    5 KB (765 words) - 23:30, 5 February 2016
  • SupportExtruder 1 0
    = The Paste Extruder Version 0.1 = ...(furthest from the solenoid) with the broader part of the connector (pins 1 through 8) at the bottom (nearest the solenoid).
    13 KB (2,301 words) - 08:06, 4 May 2013
  • Temperature Sensor v1.0
    You can [http://downloads.sourceforge.net/reprap/reprap-temperature-sensor-1.0.zip?use_mirror=osdn download the electronics files from Sourceforge]. {| border="1"
    7 KB (990 words) - 05:23, 25 July 2015
  • Temperature Sensor v1.1
    = Temperature Sensor v1.1 = * [http://parts.reprap.org/part/module/Temperature+Sensor+v1.1 Buy the components with ease w/ parts.reprap.org]
    9 KB (1,162 words) - 05:22, 25 July 2015
  • Temperature Sensor v2.0
    {| border="1" {1, 841},
    10 KB (1,359 words) - 05:21, 25 July 2015
  • Thermistor
    Rpair = 1 / (1/R1 + 1/Rth) = 1 / (1/1000 + 1/Rth) = Rpair Rth = 1 / (1/1000 - 1/Rpair)
    28 KB (3,636 words) - 15:56, 27 June 2019
  • Thermocouple Sensor v1.0
    You can [http://downloads.sourceforge.net/reprap/reprap-thermocouple-sensor-1.0.zip?use_mirror=osdn download the electronics files from Sourceforge]. [[File:Thermocouple_1.0_schematic.png|200px|||Thermocouple 1.0 Schematic]]
    11 KB (1,583 words) - 05:18, 25 July 2015
  • Thermocouple Sensor 1 1
    = Thermocouple Sensor v1.1 = * Make tracks to/from Pin 1/14 to thermocouple fatter
    234 bytes (32 words) - 19:38, 26 November 2011
  • ThermoplastExtruder
    ...meter at a temperature of 140 <sup>o</sup>C and a rate of up to 4 mms<sup>-1</sup>. The extruder is experimental, in that many parameters for it (parti ...staff.bath.ac.uk/ensab/replicator/Downloads/extruder/extruder.html Version 1 RepRap polymorph extruder head] has the great virtue that it works, but it
    52 KB (8,773 words) - 09:49, 5 January 2015
  • TobyBorlandOriginal
    These are the build instructions for a plywood Version 1.0 Darwin RepRap. This is a duplicate of the one exhibited at the [http://ww ...and that look like these. You are assembling 1 of these so there should be 1 set of pieces as per the IB1 photo. Proceed to dry fit them together as per
    35 KB (5,651 words) - 17:32, 12 March 2021
  • TriggeredCatalysts
    ...concentration of Benzophenone initiators in the polymer blend lies between 1 and 4 weight percent (wt%). High concentrations speed up the hardening proc
    3 KB (504 words) - 00:06, 21 April 2014
  • TriggeredPolymerizationResinBlends
    [http://www.sartomereurope.com/prodline.asp?plid=1 Monomers at Sartomer.com] ...concentration of Benzophenone initiators in the polymer blend lies between 1 and 4 weight percent (wt%). High concentrations speed up the hardening proc
    6 KB (901 words) - 17:56, 8 November 2021
  • Universal Controller Board v1.1
    {{Deprecated|UniversalControllerBoard 1 3}} {| border="1"
    19 KB (3,040 words) - 04:53, 25 July 2015
  • Universal Controller Board v1.2
    {{Deprecated|UniversalControllerBoard 1 3}} {{Motor Driver|next=Stepper Motor Driver 1.0}}
    31 KB (5,053 words) - 04:54, 25 July 2015
  • Universal Controller Board v1.3
    * Fastener holes: ensure clearance fit for 1/8" (3.125mm) diameter shank (Imperial equivalent of M3). Dia 3.5mm should d * Fastener washer space: ensure circuits avoid the radius of an M3 or 1/8" washer on the fastener holes (metal washers might short the circuit).
    2 KB (250 words) - 04:56, 25 July 2015
  • Universal Controller Board v1.2 BOM
    {{Deprecated|UniversalControllerBoard 1 3}} ...://spreadsheets.google.com/pub?key=pmEMxYRcQzzATwbOb71BmGA&output=html&gid=1&single=true&widget=true'></iframe>
    800 bytes (109 words) - 04:56, 25 July 2015
  • UniversalPenTouchProbe
    ...a 20mm Conduit coupling for the former. The OD of these is approx 24mm. A 1.5mm stainless steel welding rod was used for the wire. Stainless Steel bein ...file in indents to both the Adapter and Half coupler edges 3mm across and 1.5mm deep. Again if you don't have a file of this size wrap some fine sand p
    19 KB (3,372 words) - 08:17, 2 January 2015
  • Useful links
    ...ly.com/releases/2015/10/151001095832.htm Asociación RUVID. (2015, October 1). A material able to repair itself. ScienceDaily] Quote: "...Researchers ha
    6 KB (679 words) - 01:57, 6 June 2020
  • VerticalPlatform
    ==== Version 1 '''*DRAFT*''' ==== ====1. Summary ====
    10 KB (1,728 words) - 14:22, 29 November 2011
  • VeryFirstConcreteTestArticle
    After 1 hour the needle was removed by pulling upwards. This resulted in some damag
    2 KB (373 words) - 14:23, 29 November 2011
  • Where is my JRE
    ...7.04 uses Sun Java 6. Earlier releases will probably use Java 1.5.0 (java-1.5.0-sun) instead of Java 6 (java-6-sun). Either one will work with RepRap. {| border="1"
    4 KB (670 words) - 12:04, 21 July 2015
  • Generation 2 OnABoard
    R11, R12 and R13 need to be replaced by 1 kΩ or less. ...ll. They have to be drilled out large enough to fit the leads through. A 1 mm drill bit seems to work well. D1 and D2 are connected on the back of th
    10 KB (1,839 words) - 05:07, 25 July 2015
  • Mendel User Manual: Extruder
    This one is easy. Take a lint free cloth, cut a 1" x 4" strip and wrap it around your filament before it gets to your extrude ....blogspot.com/2010/02/extruders-pt-1-backflow-and-bench.html Extruders Pt. 1: Backflow and Bench Experiments]
    13 KB (2,270 words) - 06:25, 8 November 2012
  • Adrian's Geared Extruder
    ...work with a supply of 3mm diameter plastic feedstock. If you want to use 1.75mm diameter plastic, [[RepRap_Universal_Mini_Extruder|see this extruder i {| border="1"
    15 KB (2,556 words) - 00:59, 5 February 2024
  • Generation 3 Electronics/Tech Zone Remix
    |feedurl=http://forums.reprap.org/feed.php?13,43627,replies=1,type=rss * (1) Mainboard v1.2
    10 KB (1,580 words) - 09:31, 7 August 2013
  • Поставщики/Шаговые Двигатели
    {| class="wikitable sortable" border="1" ...tp://www.alltronics.com/cgi-bin/item/24M014/search/Lin-Engineering-Nema-17-1.8deg-24V-2A-bipolar-stepper-motor 4218L-01-11] || [http://www.alltronics.co
    4 KB (484 words) - 16:41, 10 March 2015
  • Сборка/Настройка/С чего начать
    ШАГ 1: Сделайте "предполетную проверку". Осмотр * Test 1 - direction. Carefully press X-axis HOME button keeping your hand on the Em
    4 KB (477 words) - 04:35, 22 August 2012
  • Инструкция по эксплуатации RepRap II "Мендель": Экструдер
    ....blogspot.com/2010/02/extruders-pt-1-backflow-and-bench.html Extruders Pt. 1: Backflow and Bench Experiments] ....blogspot.com/2010/02/extruders-pt-1-backflow-and-bench.html Extruders Pt. 1: Backflow and Bench Experiments]
    4 KB (646 words) - 15:35, 5 March 2012
  • Сборка/Способы Настройки
    == Bug in GCode firmware 1.4 using DC motors == #define EXTRUDER_0_STEP_ENABLE_PIN (byte)-1
    3 KB (506 words) - 04:45, 26 November 2011
  • Инструкция по эксплуатации: Программное обеспечение
    usb 1-1: new full speed USB device using uhci_and address 2 usb 1-1: configuration #1 chosen from 1 choice
    4 KB (651 words) - 14:46, 26 November 2011
  • Инструкция по эксплуатации RepRap II "Мендель": RepRapG-Код
    The RepRap firmware expects line numbers to increase by 1 each line, and if that doesn't happen it is flagged as an error. But you c ...ccelerating, so as to get there fast. But when it arrives it backs off by 1 mm in each direction slowly, then moves back slowly to the stop. This ensu
    10 KB (1,582 words) - 04:43, 26 November 2011
  • Настройки ПО
    === BackColourB(0..1)=0.9, BackColourG(0..1)=0.9, BackColourR(0..1)=0.9 === === FastSpeed(-1..255)=240 ===
    27 KB (4,238 words) - 14:46, 26 November 2011
  • RUG/New Zealand
    |feedurl=http://forums.reprap.org/feed.php?41,replies=1,type=rss ...makershop.co.nz] - Resells a selection of Diamondage Filaments. As well as 1.75mm PLA and ABS from Flashforge.
    14 KB (1,817 words) - 05:52, 21 January 2015
  • Frame material
    The ideal material for a n+1 generation RepRap has these characteristics: ...hine] appears to be built out of grid beam. A RepStrap built mostly out of 1" square perforated tube. ''(Is this a [[Eiffel]] or something else?)''
    14 KB (2,005 words) - 09:54, 15 June 2020
  • Funbot i1
    * Non-Printed Parts: Motors. Electronics. Wood Base. 2 Build Plates. 1 Threaded Rod/Lead Screw. 9 Chromed Pipes/Smooth Rods. * Printing Size: build area of about 6.1" x 6.7" x 4.7" or 155mm x 170mm x 120mm (Updated 2015-01-17)
    8 KB (1,309 words) - 14:54, 19 September 2018
  • Free and Open Source 3-D Model Customizer for Websites to Democratize Design with OpenSCAD
    ...zer for Websites to Democratize Design with OpenSCAD]. ''Designs'' 2017, 1(1), 5; doi:10.3390/designs1010005 [https://www.academia.edu/33772407/Free_and
    4 KB (555 words) - 12:13, 24 January 2019
  • FoldaRap Development
    5 m4x8 / x-belt-clamp (2), z-slider (2), z-endstop-holder (1) 5 m4 Tnut / x-belt-clamp (2), z-slider (2), z-endstop-holder (1)
    6 KB (848 words) - 08:02, 4 September 2017
  • Alternative Electronics
    ...therboard_1_2-motherboard-modified-small.jpg|100px]] || [[Motherboard_1_2|1.2 - Gen 3]] || || || atmega644p || No || No || FiveD || Released || || ...Something Ancient || || || atmega644p || No || No || Proclarush Taonas 1.0 || Retired ||
    18 KB (2,604 words) - 08:58, 6 May 2020
  • LaserCut Mendel
    ...ed by TechZoneCommunications.com llc. It was originally intended to be a 1:1 replacement for printed parts, however due the overly complex post-processi |feedurl=http://forums.reprap.org/feed.php?151,43492,replies=1,type=rss
    6 KB (943 words) - 20:16, 20 September 2013
  • Waxuum
    1. A heated basin is filled with wax, which is then allowed to cool. This bi 1. The wax is melted instead of cut, so high forces are not required at the
    8 KB (1,323 words) - 00:29, 1 September 2013
  • Bonsai RepStrap
    {| border="1" cellspacing="0" cellpadding="2" '''Connector pinout (0.1" pitch):'''
    6 KB (964 words) - 21:36, 8 December 2013
  • RUG/UK/Sheffield
    |feedurl=http://forums.reprap.org/feed.php?192,replies=1,type=rss ...rmd=ivnsm&bav=on.2,or.r_gc.r_pw.&um=1&ie=UTF-8&q=rutland+arms+sheffield&fb=1&hq=rutland+arms&hnear=Sheffield,+UK&cid=1395522178345699410 Rutland Arms],
    4 KB (719 words) - 03:17, 7 May 2012
  • Microstepping with optical feedback
    ...te useful. (Similar ideas can be applied to DC motors -- see [[RepRapServo 1 0]]). ...ith a normal RAMPS shield. The Axis Controller runs on a PJRC Teensy 3.0/3.1. A wiring schematic is available in the Schematic folder of the Closed Loop
    8 KB (1,282 words) - 17:31, 16 May 2016
  • Lubrication
    [[http://forums.reprap.org/read.php?1,62876,63203#msg-63203 Reprap-Compatible Grease]] [http://forums.reprap.org/read.php?4,116453,116566,quote=1 "Linear bearing compatible lubrication?"].
    18 KB (2,729 words) - 19:09, 11 November 2021
  • LaserCut Mendel Post processing
    == Y Axis Bar Clamp (Style 1) == ...uare). The depth is almost half the thickness of the material (aprx 3mm or 1/8 In.) The image on the left shows a board which I cut to hold the small Ba
    16 KB (2,757 words) - 04:15, 26 November 2011
  • RBS Overview
    ...ost, greater electrical efficiency, and faster speeds -- see [[RepRapServo 1 0]]. It also allows for lower quality gears, non-toothed belts, ropes or ca
    8 KB (1,248 words) - 15:45, 12 November 2021
  • LaserCut Mendel Assembly Blog
    <tool name="Pinch Wheel Extruder v1.1" type="extruder" material="abs" motor="true" floodcoolant="false" mistcoola <!-- optional, defaults to 1. <databits>1</databits> -->
    24 KB (4,167 words) - 06:37, 26 November 2011
  • Stepper wiring
    ...ers like DigiKey, and the correct part # for common 24AWG wire is 455-2148-1-ND, see the associated products for other gauges. ...is not advised to do it by hand with pliers, or to buy the manufacturer's $1,500 tool, instead you can easily use a non-ratcheting tool such as the Sarg
    9 KB (1,560 words) - 06:38, 13 May 2016
  • Generation 3 Electronics/Tech Zone Remix/How to
    ***1. The drivers that come bundled with replecatorG-0014 ...JPG|180px]][[File:Attaching_Jumpers.JPG|180px]][[File:Jumpers mother-board 1.JPG|180px]][[File:Jumpers mother-board 2.JPG|180px]]
    19 KB (3,112 words) - 09:29, 7 August 2013
  • Mendel heated bed
    ...volts, then this implies a bed resistance of 12<sup>2</sup>/100, or about 1.5 ohms. This further implies a total current of 8A. ...lf should be 3 ohms. If you have done it as a single circuit it should be 1.5 ohms. Connect up the heater.
    13 KB (2,361 words) - 21:26, 8 December 2013
  • Geared Nema17 Extruder V0.5
    ...se to let the bolt spin ([http://www.youtube.com/watch?v=2FU0v-3gloo video 1] and [http://www.youtube.com/watch?v=Hl4Gf5R4YJg video 2]): video using [[I
    6 KB (995 words) - 10:19, 6 May 2014
  • Generation 7 Electronics
    * 4x Pololu stepper drivers, exchangeable, up to 1/32 microstepping. [[Gen7 Endstop 1.3.1]] is an optical endstop, made to fit on Mendels & Co. Compatible with contr
    25 KB (3,841 words) - 01:45, 9 October 2017
  • Fully printable reprap
    *3 bottom parts merged into 1 part *3 side parts merged into 1
    2 KB (331 words) - 21:09, 27 February 2011
  • FD pencil case
    Image:FD_PC02_picture_1.JPG| view 1
    653 bytes (93 words) - 21:54, 29 July 2010
  • Compliant Linear Motion Mechanism 1
    |name = Compliant Linear Motion Mechanism 1 y = (1 / E / I) * ( Pmax*x.^3 / 6 - Pmax*L*x.^2 / 4 );
    9 KB (1,420 words) - 05:25, 8 September 2013
  • Metal Etching Scriber
    1. The scriber itself is nothing fancy, just an aluminum housing with a sprin [[Image:EtchScriber3.jpg|200px| metal 1]]
    7 KB (1,117 words) - 02:50, 29 December 2014
  • Mendel/de
    ...wendet ø 3 mm Draht.|| [[PLA]], [[HDPE]], [[ABS]] & weitere. Verwendet ø 1/8” Draht. | Genauigkeit||Durchmesser der Düse 0,5 mm, 2 mm Mindestdetailgröße, 0,1 mm Positioniergenauigkeit, Schicktdicke 0,3 mm||Durchmesser der Düse 0,020
    4 KB (600 words) - 23:13, 13 February 2024
  • Platinenbau
    * 1 [[Motherboard 1.2 (Deutsch)|RepRap Motherboard]] (''mendel/electronics/motherboard''), * 1 [[Mendel USB- und Stromanschluss]] (kein Eagle-Entwurf - einfach nur ein St
    2 KB (317 words) - 16:58, 4 December 2011
  • Construcción de los circuitos de la placa
    * 1 [[Motherboard_1_2|Placa base de RepRap(en inglés)]] (''mendel/electronics/ * 1 [[Mendel USB and power connector|conectores USB y de corriente(en inglés)]
    3 KB (391 words) - 09:05, 26 November 2011
  • RUG/California/Bay Area
    * [http://shopping.netsuite.com/s.nl/c.456127/n.1/.f Mr. Metric] - Mr. Metric does online and phone orders but also has a [ht ...zed pieces of glass cut extremely cheaply. A 8" by 8" sheet costs around $1.
    4 KB (589 words) - 06:44, 6 August 2019
  • Elektroverkabelung
    Die 12 Volt Stromkabel zuerst verbinden. Man braucht 1,1 m zweiädrige Kabel. ...bere Bild zeigt die Buchse (weiblich) und den Stecker (männlich). Kontakt 1 ist die Masse-/Negativverbindung und Kontakt 2 ist für +12 V vorgesehen. K
    7 KB (1,057 words) - 23:14, 13 February 2024
  • RUG/Malaysia
    |feedurl=http://forums.reprap.org/feed.php?196,replies=1,type=rss ** No. 45-1 & 45-2, Jalan Taming Permai 1, Off Jalan Balakong, Balakong, 43300, Seri Kembangan, Selangor
    5 KB (763 words) - 05:17, 27 November 2019
  • Feedstock
    {| border="1"
    1 KB (245 words) - 15:09, 13 July 2012
  • LaserCut Mendel Assembly
    [[File:X-axis top view 1.JPG|300px]][[File:X-axis carriage.JPG|300px]][[File:X-axis top view 2.JPG|3 [[File:X-axis-bottom view 1.JPG|300px]][[File:X-axis bottom view 2.JPG|300px]]
    15 KB (2,600 words) - 04:15, 26 November 2011
  • Puesta en marcha
    <math>\frac{1}{\frac{\pi\varnothing_{pw}}{Pasos_{360}}.Ratio_{Boquilla/Filamento}}</math>
    2 KB (268 words) - 16:17, 24 November 2011
  • Piezas de Mendel (más información)
    {| class="wikitable" border="1" | 1
    16 KB (2,503 words) - 05:23, 26 November 2011
  • Mendel Bearing Kits
    {| border="1"
    2 KB (190 words) - 15:13, 13 July 2012
  • Kits de rodamientos de Mendel
    {| border="1"
    786 bytes (102 words) - 15:12, 13 July 2012
  • Community portal/de
    [[#Mitmachen|1 Mitmachen]]<br />
    3 KB (353 words) - 10:46, 20 May 2018
  • Foton 3Dprinter
    1. Maintaining a low level of technical complexity for the end user ...uisite-khelpcenter.png|frameless|right]][http://forums.reprap.org/feed.php?1,55419 Forum/Mailing List]</h2>
    4 KB (642 words) - 23:17, 13 February 2024
  • Re-Extruder
    1. Power supply<br>
    4 KB (658 words) - 01:45, 21 April 2014
  • Geared extruder nozzle
    {| border="1" |1
    15 KB (2,727 words) - 11:12, 30 November 2018
  • Using Blender for making print-sheets
    ...t is what you decide yourself. For a single 'blender unit', you should use 1 mm to be compatible with the other processes (namely, Skeinforge which will ...Properties" window is avaiable, use that to make it very thin (less than 0.1 thick).
    6 KB (1,094 words) - 06:40, 11 January 2015
  • Extrusor de Mendel
    | Barrera térmica y boquilla [''Thermal-barrier and nozzle'']||1||1||Montaje | pinch-wheel-bracket-NEMA17_604-bearing_1off.par||1||1||RP
    13 KB (2,201 words) - 00:18, 11 September 2012
  • DIY PCBs double sided toner transfer
    ...er clad boards and etching chemicals + drill press with drill bits (0.8mm, 1.0mm, etc); ...ote, using the iron tip with the sphere of solder like that has 2 caveats: 1) the resin in the solder will be burned before touching the parts, which me
    34 KB (6,022 words) - 02:44, 29 December 2014
  • Eje-X de Mendel
    | x-carriage-lower_1off||1||1||RP | x-carriage-upper_1off||1||1||RP
    13 KB (1,936 words) - 14:18, 25 November 2011
  • Eje-Z de Mendel
    | z-leadscrew-base-bar-clamp_2off.par||1||2||RP | z-leadscrew-base_2off.par||1||2||RP
    6 KB (951 words) - 14:19, 25 November 2011
  • Eje-Y de Mendel
    ...//www.thingiverse.com/thing:1625 #2] [http://blog.arcol.hu/?p=312 #3])||1||1||RP | y-motor-bracket_1off.par||1||1||RP
    7 KB (1,060 words) - 14:19, 25 November 2011
  • Placas de circuitos de Mendel
    | motherboard-plate.par||1||1||Chapa [[Media:Mendel motherboard-plate.par.png|imagen]] [[Media:Motherboar | extruder-controller-v2-2.par||1||1||PCB
    2 KB (342 words) - 04:35, 26 November 2011
  • Mendel frame/es
    | z-leadscrew-base||1||2||Montaje | Y motor bracket||1||1||Montaje
    14 KB (2,225 words) - 12:54, 25 November 2011
  • Actuator Fabrication
    [http://forums.reprap.org/read.php?1,37085 95% reprappable repraps] [http://forums.reprap.org/read.php?1,5726 Artificial Muscles]
    18 KB (2,570 words) - 06:03, 7 December 2017
  • Extruder Nozzle Variations
    The Peek support block has 1 change. Drill and Tap the Center hole to M10. **1 piece design.
    10 KB (1,681 words) - 13:19, 13 May 2014
  • Huxley Seedling
    |url = [http://forums.reprap.org/read.php?1,58082,58215#msg-58215 Original forum Post] |version =0.1
    9 KB (1,536 words) - 09:21, 18 September 2015
  • MegaMendel
    1 - I made the "plastic" parts in MDF - So there was a need for a design that ...double the size of the frame, but then I learned that threaded rod come in 1 meter lengths. That decided the length of the X-axis. The triangles are siz
    21 KB (3,936 words) - 10:31, 17 June 2016
  • Cableado electrónico
    Comienza cableando los cables de alimentación de 12 voltios. Necesitarás 1,1 m de cable de dos hilos. ...uiente se está examinando el enchufe (hembra) y los pines (macho). El pin 1 es la tierra (negativo) y el pin 2 es la toma de +12v. El pin 3 no se usa.
    7 KB (1,251 words) - 04:37, 26 November 2011
  • Francisco
    1: Some kind of plastic<br> R=L/(√2)=300/(1,4142)=212.134, so I round it up, and make it 220mm of Radius.
    5 KB (854 words) - 18:13, 27 December 2014
  • Gears:Simultaneous Meshing with Rack
    ...d an Octave-ready version of the script [http://forums.reprap.org/read.php?1,51452,52099#msg-52099 here]. You will need the zipped code from this page where <math>k = 0, 1, 2, 3, ...</math>,
    6 KB (917 words) - 22:00, 6 February 2013
  • Mendel Multiple Extruder
    1. At the moment, the opto flag attaches to the mounting plate (which it is o
    3 KB (506 words) - 21:12, 9 November 2010
  • Plotting
    There are a few approaches ([[Pen_Holder|1]], [http://builders.reprap.org/2008/04/plotting-gerber-files.html 2], [[Bui # Extruder3_Lift(mm)=1.0
    19 KB (3,296 words) - 23:22, 13 February 2024
  • Filament Spindle
    {| border="1" cellpadding="20" cellspacing="0" {| border="1" cellpadding="20" cellspacing="0"
    6 KB (827 words) - 02:59, 3 August 2010
  • Pololu Extruder Stripboard
    {| border="1" cellpadding="10" cellspacing="0" |1
    3 KB (444 words) - 07:34, 10 January 2015
  • Generation 6 Electronics
    Version 1.0, Released October 4th, 2010, is the latest version released to the commun ...hed this page so feel free to add/delete.''--[[User:Buback|Buback]] 20:16, 1 August 2011 (UTC))
    26 KB (4,199 words) - 20:05, 15 March 2018
  • Conductor de Extrusor Adaptado Nema17
    ...stro de filamento plástico de 3 mm. Si usted quiere utilizar plástico de 1.75 mm, [[RepRap_Universal_Mini_Extruder |vea este extrusor]]. {| border="1"
    18 KB (2,951 words) - 22:02, 7 October 2012
  • NYC Maker Faire
    * Shane H (Alpha 1 Labs): Bringing a Mendel http://forums.reprap.org/read.php?1,44370
    3 KB (487 words) - 17:33, 24 November 2011
  • Inbetriebnahme
    <math>\frac{1}{\frac{\pi\varnothing_{Klemmrad}}{Schritte_{360}}.Verhaeltnis_{Duese zu Fil
    2 KB (271 words) - 06:31, 26 November 2011
  • Mendel USB and power connector/de
    ...er Buchse ("Female" = weiblich) und des Steckers ("Male" = männlich). Pin 1 ist der Masseanschluss (Ground = Minuspol) und Pin 2 ist der +12V-Anschluss ...ataSheets/Modules/DS_UM232R_V103%20FT_000051.pdf datasheet] - connect pins 1 and 2).
    6 KB (891 words) - 14:16, 6 December 2011
  • Optischer Grenztaster 2.1
    {{Languages|Gen7 Endstop 1.3.1}} * [http://store.makerbot.com/electronics/electronics-kits/optical-endstop-v2-1-kit.html Full kits (parts + pcb) available from MakerBot Industries]
    15 KB (2,283 words) - 09:52, 14 December 2014
  • PC-Netzteil
    ...Nummern zählen dann von links nach rechts an der Oberseite entlang (Pins 1 bis 10) und dann von links nach rechts an der Unterseite entlang (Pins 11 b [[image:FAQ-ATX-to-Lab-PSU-1.jpg|thumb]]
    19 KB (2,908 words) - 09:35, 30 December 2014
  • 4 Axis TB6560 CNC Stepper Motor Driver Board Controller
    ...//translate.google.com/translate?js=y&prev=_t&hl=en&ie=UTF-8&layout=1&eotf=1&u=http%3A%2F%2Fhyu68.com%2FHY-TB4DV-M.htm&sl=zh-CN&tl=en google translatio {|border="1"
    9 KB (1,480 words) - 05:58, 29 November 2014
  • Mendel Alternate X Motor Bracket
    | xaxis-motorbracket_1off.par||1||1||RP | stepper-motor-nema17-fl42sth47-1684A-01.par||1||1||Motor
    3 KB (418 words) - 13:01, 16 January 2011
  • RepRapBreeding
    * 1. as simple as possible, but no simpler * 1. reduction in number of bearings
    3 KB (398 words) - 00:01, 29 November 2010
  • Magnet joint
    [[Image:Delta Prototype 1 upside down.jpg|right|300px|right| Delta prototype: see the magnets?]]
    3 KB (396 words) - 11:00, 10 November 2013
  • SAE Prusa Mendel
    ...ffshoot of the [[Prusa Mendel]], only difference currently is it only uses 1 screw size (SAE #6 instead of metric M3 and M4), and only uses 608 bearings {| class="wikitable sortable" border="1"
    13 KB (1,967 words) - 11:57, 9 November 2014
  • PCB Heatbed
    1 x 1K ohm Surface Mount Resistor ...easure the resistance of your board. I (evilB) didn't and blew up my Ramps 1.2 MOSFET because of a too high current. My measured resistance was 0.8 Ohm.
    27 KB (4,526 words) - 02:36, 20 February 2021
  • Columbus
    ...er for released revisions (A,B,C...) or a number for unreleased revisions (1,2,3...) ...eberg) and O (as in orange) are skipped due to their similar appearance to 1 and 0 respectively.
    16 KB (2,554 words) - 02:35, 24 October 2015
  • Delta Rostock mini G2s Build Manual
    When installing on the spider, tighten each bolt a 1/4 turn at a time, until both bolts have begun to screw into the spider, the Alternatively, widen the switch's mounting holes using a 1/8" US drill bit.
    8 KB (1,275 words) - 03:04, 24 October 2015
  • Comparison of the Open Source Software Definition and the Open Source Hardware Definition
    ...px; border-style: solid; border-color: #000; vertical-align: top;" border="1" cellpadding="7" | 1. Free Redistribution
    10 KB (1,521 words) - 13:52, 25 November 2011
  • SAE Mendel
    ...d instead of M8 threaded rod (diameter 8 mm --> 7.94 mm; pitch 1.25 mm --> 1.41 mm) ...ap used 1/4-20 threaded rod: diameter 1/4 inch (6.35 mm), pitch 1/20 inch (1.27 mm) -- [[Builders/Frank#Calibration and Testing]]
    3 KB (499 words) - 11:50, 22 March 2013
  • Heated WolfBed/de
    http://forums.reprap.org/read.php?35,50018,page=1 Auf Pin 1 und 2 passt eine größere Lüsterklemme
    5 KB (716 words) - 09:22, 7 August 2013
  • Builders/Config/Getting Started/de
    SCHRITT 1: Mache einen Pre-Flight-Check. Kontrolliere alle Gelenke und Mechanismen de ...se um 1 mm. Sie sollte sich ein sehr kleines Stück bewegen. Bewege sie um 1 mm zurück.
    5 KB (781 words) - 18:07, 28 November 2014
  • RepRapUnion
    ...restricted. This program was started by SpaceXULA after finding out that 1/2 of the sets he had printed and sold had not been assembled, or much less -If SpaceXULA receives a set of parts back from you within 1 month of the day you receive the parts, he will PayPal back to you $50 doll
    2 KB (283 words) - 16:58, 24 November 2011
  • SpaceXULAUnion
    ...ithin 1 month of the day you receive the parts, he will PayPal back to you 1/2 the cost of the part to you.
    2 KB (254 words) - 16:37, 24 November 2011
  • Java Software Preferences File/de
    === BackColourB(0..1)=0.9, BackColourG(0..1)=0.9, BackColourR(0..1)=0.9 (Hintergrundfarben) === === FastSpeed(-1..255)=240 ===
    30 KB (4,700 words) - 15:25, 26 November 2011
  • Mendel/Parts
    | [[Mendel_X-axis#Vert_bearing_360|Mendel X-axis - Vert bearing 360]] ||1 | [[Mendel_X-axis#Vert_bearing_360|Mendel X-axis - Vert bearing 360]] ||1
    14 KB (1,861 words) - 15:09, 25 November 2011
  • Prusa Mendel
    * Print Volume: 200mm x 200mm x 100mm (8.2" x 8.2" x 4.1") {| class="wikitable sortable" border="1"
    8 KB (1,134 words) - 18:28, 10 January 2019
  • Belt splitter jig/de
    | belt-width-adjuster_1off||1||1||RP | Teppichmesserklinge||1||1||Klinge
    2 KB (285 words) - 06:45, 3 December 2011
  • MetalicaRap
    |feedurl=http://forums.reprap.org/feed.php?215,replies=1,type=rss ...odation costs [http://www.viewpictures.co.uk/Details.aspx?ID=147524&TypeID=1 Japanese metal home] moving beyond high status cultural applications [http:
    168 KB (26,821 words) - 07:28, 3 July 2023
  • Holliger
    ...ctronics||Any controller compatible with [[RepRap Interface Standard]] RIS 1.
    4 KB (623 words) - 23:30, 1 February 2024
  • CRAMPS2.1
    |name = CRAMPS 2.1 ...face-mount and through-hole design. The fine-pitch SMT parts from version 1.0 have been removed, so all parts are now large pitch or through-hole, and
    11 KB (1,800 words) - 11:48, 1 December 2014
  • TechZone Tip Assembly
    ...ad, bored with ~3mm bore until it is about 1mm from the end, the end has a 1/2mm hole in it and is ground with a taper. ...andard Teflon and/or peek insulators, then we found on a chart that Oak is 1/10th as conductive as the Teflon or peek! So, we make the insulator out of
    17 KB (3,114 words) - 04:25, 17 December 2011
  • TechZone A-D With OneWire
    ...10)][0] + (tmpCJ-temptable[(int)(tmpCJ/10)][1])*(temptable[(int)(tmpCJ/10)+1][0]-temptable[(int)(tmpCJ/10)][0])/10; if(cjComp>temptable[NUMTEMPS-1][0])
    14 KB (1,479 words) - 12:03, 19 December 2011
  • Glass Nozzles
    ...uisite-khelpcenter.png|frameless|right]][http://forums.reprap.org/feed.php?1,53676 Forum/Mailing List]</h2> |feedurl=http://forums.reprap.org/feed.php?1,53676,replies=1,type=rss
    14 KB (2,545 words) - 18:09, 29 December 2013
  • RevarBed
    Drill an additional 1/8" hole in the platform to mount the thermistor into, in the center of the
    3 KB (451 words) - 04:51, 9 September 2010
  • ORE-Bot
    * rods - qty:2, stainless steel, 0.750", 15", ends drilled and tapped for 1/4-20 screws * cross bars - qty:2, aluminum, 0.5" x 1.25" x 12.6"
    3 KB (512 words) - 23:32, 13 February 2024
  • Wealth Without Money/de
    {| border="1" * 1. die Anzahl der existierenden Maschinen und der Reichtum, den sie produzier
    14 KB (2,029 words) - 12:31, 25 November 2011
  • TRap
    ====Concept 1: Modified Delta Style Manipulator==== [[File:trap_concept_1.jpg|thumb|center|300px|TRap Concept 1: Structural sketch.]]
    10 KB (1,579 words) - 00:37, 13 December 2010
  • Easy Reliable Coupler
    ...make out of plastic. The attached STL file is a 3/32 to 1/4 coupler. It is 1/2" long, and 3/4" diameter. It uses 6 #4 nuts that are forced fit into the
    2 KB (253 words) - 00:12, 2 December 2010
  • TRap workbook 2010 September
    * Finished mocking up Concept 1. [[File:trap_concept_1.jpg|thumb|475px|TRap Concept 1: Structural sketch.]]
    2 KB (380 words) - 13:36, 6 November 2010
  • Mendel Introduction Redraft
    ...]] & more. Uses ø 3 mm filament.|| [[PLA]], HDPE, [[ABS]] & more. Uses ø 1/8” filament.
    4 KB (600 words) - 23:33, 13 February 2024
  • Brutstruder
    Released on Thingiverse ([http://www.thingiverse.com/thing:4036 version 1], [http://www.thingiverse.com/thing:4042 smaller version 2]), and uploaded * 1 X 608 bearing (Skateboard bearings);
    2 KB (281 words) - 00:36, 22 July 2014
  • Generation 8 Electronics
    ...t heat. 3 amps takes a rather large heat sink, 2 amps a smaller heat sink, 1 amp the large areas of copper on a 2 oz board.
    11 KB (1,901 words) - 10:30, 10 June 2017
  • PCB Milling
    ...0.4&nbsp;mm. Not sufficient for typical SMD parts, but well working for 0.1" (2.54&nbsp;mm) spaced IC pins. With higher precision machines one can achi sudo apt-get install libdbus-1-dev libgtk2.0-dev
    38 KB (6,028 words) - 23:58, 25 May 2020
  • Teacup Firmware
    # If you're using Arduino IDE 1.6.x to 1.6.9, delete these folders inside the toplevel folder: ''attic'', ''simulato ...all files into another directory and builds there. Unfortunately versions 1.0.x and before copy only files directly in the main folder, not those in su
    50 KB (8,031 words) - 02:50, 4 November 2017
  • R2C2 RepRap Electronics
    ...due to the cutting edge technology '''32 bits ARM microcontroller (version 1.2: LPC175x) running at 100MHz''' with fast '''integrated USB controller'''; | ||1 orange LED to signal the power input
    9 KB (1,401 words) - 01:30, 9 October 2017
  • M115 Keywords
    === Version: 0.1 Draft 20101011 === FIRMWARE_VERSION:1.2.3
    3 KB (479 words) - 15:46, 4 January 2015
  • Optical encoders 01
    Image:FD_opto_sensor_identification_01.JPG| Sensor example 1
    5 KB (946 words) - 20:58, 11 October 2010
  • Columbus/workbook
    ===1 SEP '10=== :[[User:Isaac Olson|--Isaac Olson]] 11:13, 1 September 2010 (UTC)
    10 KB (1,548 words) - 13:51, 25 November 2011
  • Elegant multispline motion controller
    ...n or merging boards together. This design will include a high speed USB 1.1 interface running at the full 12 MBPS. There will be a small amount of pre ...It is synonymous with the velocity vector at the start of the curve Point 1. Control point 3 is synonymous with the inverse of the velocity vector at
    29 KB (4,689 words) - 15:45, 4 January 2015
  • Francisco/es
    1: Algún tipo de plástico<br> R=L/(√2)=300/(1,4142)=212.134, redondeo hacia arriba, y tengo 220mm de Radio.
    5 KB (933 words) - 18:14, 27 December 2014
  • Columbus/repository
    ...er for released revisions (A,B,C...) or a number for unreleased revisions (1,2,3...) ...eberg) and O (as in orange) are skipped due to their similar appearance to 1 and 0 respectively.
    3 KB (414 words) - 13:51, 25 November 2011
  • Portable USB Ubuntu RepRap Host
    1) Don't bother typing commands into the terminal. Just search for the packag '''1.''' A USB stick 2GB or larger
    6 KB (1,018 words) - 17:19, 4 March 2012
  • Mechanical Endstop
    ...cycles. However, most purpose built micro-switches are rated for well over 1,000,000 cycles and will last years. {{NOTE|icon=printer|'''Marlin''': 1. Comment the constant {{SCODE|ENDSTOPPULLUPS}} in [https://marlinfw.org/doc
    15 KB (2,467 words) - 12:25, 5 April 2021
  • 32 Generation X 1 Electronics
    1) More than 3 stepper axes. 7 should be a minimum 9) Memory storage. 1 GB should be a minimum
    11 KB (1,809 words) - 10:04, 26 November 2011
  • RUG/Australia/Melbourne
    |feedurl=http://forums.reprap.org/feed.php?129,replies=1,type=rss ...ittle so it may require a bit more tweaking. [[Arduino Mega]]/[[RAMPS]] V1.1 Boards built and tested. Extruder has arrived, thanks to [[User:Kliment|Kli
    9 KB (1,462 words) - 07:20, 28 August 2019
  • Helium Frog Delta Robot
    ...ap.org/read.php?35,57185,page=1 Delta robot and software development forum 1 - German]
    3 KB (429 words) - 11:15, 6 February 2015
  • WatBot
    1. Provide a way for me (an architecture master's student) to learn, and take
    4 KB (579 words) - 11:59, 6 October 2013
  • Monotronics
    ...so very small adjustments may make a big difference. I would adjust about 1/8th of a turn at a time to start with, then fine tune it with even smaller ...mation about my environment: avr-gcc 4.8.2, avrdude 6.0.1, libusb-compat 0.1.5, and java-rxtx 2.2pre2 were present on my system.
    28 KB (4,657 words) - 00:10, 5 August 2015
  • RStep
    [*] Software controllable fractional stepping (1,1/2,1/4,1/16)
    2 KB (240 words) - 06:27, 29 November 2014
  • UBW32 Blue Banana Electronics
    ...no special tools are needed to update firmware and the board has standard .1" raster so it is easy to work with. | UBW32 Firmware 1.4 modified to compile under MPLAB-x (not reprap related yet)
    3 KB (505 words) - 01:19, 14 November 2010
  • RepRapMicron
    ...is intended to be a RepRap capable of micron (1/1000th of a millimetre, or 1µm) and sub-micron fabrication. This degree of accuracy has been made possi ...epRap logo scratched in Sharpie marker with a hypodermic tip positioned to 1μm height on "Titch" prototype]]
    13 KB (2,073 words) - 02:46, 4 May 2024
  • Изработване на РепРап електроника
    1. Еднослойна печатна платка (ЕПП). Размери {| border="1" cellspacing="0" cellpadding="2"
    6 KB (200 words) - 18:38, 15 December 2011
  • FabPod
    *Finish Round 1 Prototype Designs - '''WE ARE HERE''' *Print Round 1 Prototypes
    6 KB (977 words) - 08:14, 8 September 2013
  • NXTStrap
    : 1 Lego NXT Set : 1 Glass Plate
    3 KB (555 words) - 07:50, 6 January 2014
  • Fused filament fabrication
    ...different infill patterns, can give differences in strength of almost 2 to 1. An interlocking infill pattern seems to give more strength. For more infor * [http://forums.reprap.org/read.php?1,68489 RepRap forum: "Questions about durability of repraped models"]
    2 KB (290 words) - 08:21, 28 February 2019
  • Integrated Parametric RepRap
    | Pre-Release 1 1. If it is a constant it lives in the DNA file.
    4 KB (592 words) - 01:32, 7 August 2011
  • Blob Cold End
    ...piece of the steel rod that was in the printer, hobbed it with a 6/32 tap (1/4-20 would have been better) and cut grooves into it by spinning it in my d ...resolution it should have plenty of torque. Wade's cold end has about a 5:1 ratio, giving 1000 steps per revolution of the hobbed bolt. To get that res
    4 KB (639 words) - 15:00, 7 December 2010
  • Bed material
    ...s called 'ABS juice') [[http://forums.reprap.org/read.php?4,121996,121996 (1)]] ...works! ABS sticks to it quite nicely; I had some warping, but I only used 1.5 mm thick Acrylite FF P99 Acrylic Sheet from Cyro Industries. I've got so
    13 KB (2,190 words) - 22:22, 16 April 2016
  • SAE All-Metal Hot End
    ...bolt uses a 17/64 tap size, which is 1/16 larger, or about 3.5mm extra, so 1.7 wall thickness under the threads, assuming an exactly centered hole. (whi ...d need for the acorn nut on the end will be greater for a 5/16" nut than a 1/4" one.
    5 KB (805 words) - 22:41, 27 November 2010
  • Herringbone Extruder Driver
    [http://grabcad.com/library/herringbone-extruder-driver-onshape-cad-1 GrabCAD] {| border="1"
    3 KB (558 words) - 09:32, 5 November 2016
  • Repic
    ...pport. Up to 16 bi-directional digital endpoints, 13 10-bit A/D inputs and 1 D/A output. * All-in-1 fixed design means it's not flexible.
    16 KB (2,557 words) - 23:14, 5 November 2022
  • Granite Protocol A
    1 T1.1 X1000 Y1000 Z1000 E1000
    2 KB (305 words) - 06:36, 11 January 2015
  • Ultimaker's v1.1 PCB
    |name = Ultimaker's v1.1 PCB | Arduino MEGA [[Ultimaker]] Shield v1.1.brd (old)
    22 KB (3,651 words) - 09:21, 17 December 2011
  • Mendel/fr
    ...iamètre du bec : 0,5 mm, les côtés des pièces doivent dépasser 2mm, 0,1 mm de précision pour le positionnement, épaisseur de couche : 0,3mm
    4 KB (606 words) - 19:07, 28 November 2014
  • Механично сглобяване на РепРап
    Шпилки D=8 мм с резба 1 мм. / 10 лв. ...йки за екструдер и маса 2 по около 10 лв. за 1 бр. / 20 лв.<br>
    2 KB (84 words) - 07:57, 7 March 2013
  • RustyHuxley
    I designed it around 1/4" threaded rods and #6-32 bolts. It should work with 6mm rods and M6 bolts 12 x 1/4"-20 nuts
    3 KB (501 words) - 21:14, 27 December 2010
  • Web4Deb extruder
    Answer: Resistance Temperature Detectors (RTDs)are used and potted into a 1/4" NPT pipe. There are 3 sections 1) bearing chamber, hopper, and heating chamber. These are made with a secti
    5 KB (918 words) - 14:47, 20 July 2012
  • Doubling time
    it appears that a "slow" generation time of 1 week is possible with the current Mendel design, and a "fast" generation time of 1 day seems possible with only minor improvements to the Mini-Mendel design.
    7 KB (1,157 words) - 13:54, 31 December 2015
  • Reprappable-inkjet
    {| border="1" |1
    12 KB (2,112 words) - 23:40, 13 February 2024
  • Making connections
    ...IDC connectors since Vero first introduced them in the late 70's my Nascom 1 had plenty of IC skt IDC connections. I've been using them and re-using the
    2 KB (338 words) - 15:57, 16 January 2011
  • Материали за разпечатване с РепРап
    !colspan="1" style="border-style: solid; border-width: 1px; padding: 4px"| Кратко
    3 KB (248 words) - 05:36, 16 December 2011
  • MetalicaRap:Tool head processes discussion
    ...y efficiency,,,,,,,,,,,,, 75%,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,, 1 to 10 % (excluding steal 98%) ,,,,,,,,80% Beam defection rate 1m3 build,,,,,,,,,,,,,,, 0.1 m/s mechanical ,,,,,,,,,,,,,,,,,,,,,200m/s mechanical mirror ,,,,,,,,,,,,,,
    14 KB (2,037 words) - 16:17, 26 May 2013
  • MetalicaRap:Physics Principles
    100KV at 11.5mA Beam power 1.15kW/<math>mm^2</math> or 115 kW/<math>cm^2</math>. 5-15µ deep beam energy Taking the above scenario (100KV at 11.5mA Beam power 1.15kW/<math>mm^2</math> or 115 kW/<math>cm^2</math>. 5-15µ deep beam energy
    6 KB (897 words) - 07:15, 31 March 2014
  • IceRap
    ...ly "printed" a variety of objects in ice using a modified a Fab@Home Model 1. ===Step 1 - Create a sub zero (degrees Celsius) print environment===
    6 KB (1,033 words) - 05:23, 1 February 2015
  • Trispatial
    ...er for released revisions (A,B,C...) or a number for unreleased revisions (1,2,3...) ...eberg) and O (as in orange) are skipped due to their similar appearance to 1 and 0 respectively.
    5 KB (777 words) - 14:23, 14 December 2014
  • HuxleyFrame
    **(1) Y Idler - printed part **(2) threaded rods, two of the four shortest pieces, aprx 210mm (8-1/2") in length
    13 KB (2,353 words) - 15:05, 25 November 2011
  • HuxleyXAxis
    ** (1) X Carriage - from the printed parts set ** (1) 180 side of the X Carriage - from the printed parts set
    17 KB (2,995 words) - 15:06, 25 November 2011
  • TechZoneHuxley
    **(1) Thin sheet material 1) [[HuxleyFrame|Frame Assembly]]
    7 KB (1,209 words) - 10:15, 18 December 2011
  • Avery
    {| style="background-color:#ffffcc" cellpadding="10" cellspacing="0" border="1" width=100%
    1 KB (173 words) - 10:19, 26 November 2011
  • HuxleyYAxis
    ...needed other than the Huxley frame and the Y axis. The bars are 265mm (10-1/2") in length. Instalation of the build platform itself will come later...
    5 KB (842 words) - 15:06, 25 November 2011
  • Bright Light Circuit
    Merely 2.1 V will kill the module; so it seems a bit tricky to get enough power to the .../builders.reprap.org/2010/08/selective-laser-sintering-part-8.html] uses a 1 Watt IR laser diode, and successfully cut some flat black plastic about 1mm
    5 KB (696 words) - 11:54, 28 December 2010
  • Rap@Home
    ...of which is easy and cost-effective for high school shops equipped with a 1' by 2' laser cutter. Its development followed the formal design process, al ...nventor. Final drawings for the original version are laid out in 2 foot by 1 foot DXF files, optimal for laser cutting. Pieces which must be manufacture
    17 KB (2,929 words) - 06:33, 13 September 2013
  • Harvester
    1) A moveable platform or base (e.g. turntable) upon which objects can be pla 1) Make the platform in the form of a turntable that can rotate an object to
    15 KB (2,423 words) - 08:15, 2 January 2015
  • RepRap Universal Mini Extruder
    |description = A small extruder for 1.75mm filament. # 1.75 mm filament
    35 KB (6,039 words) - 14:07, 22 November 2015
  • Exquisite Automated Build Platform
    1) must not be two high as to prevent large objects from being built if you hae a cnc and have a 1/8 inch bit, here is the nc file. [http://www.profounddevices.com/abp/BOARDC
    11 KB (1,993 words) - 03:18, 14 February 2024
  • Ideas to place
    ** 1. quote exactly what commands to type to download the latest version of a fu ...source versions of the libraries used in the RapMan electronics (v3 and v3.1) so that a complete firmware package can be distributed and innovated upon
    13 KB (2,043 words) - 14:27, 14 February 2015
  • RepRap project FAQ/de
    {|border="1" {|border="1"
    28 KB (4,384 words) - 07:40, 23 November 2013
  • Auzze's One Piece Hot End
    * 4mm OD x 2mm ID x 60mm PTFE tube (see note 1)
    562 bytes (89 words) - 05:59, 14 June 2013
  • Ficha II Taller ControlMAD
    === Día 1: Electrónica === * Descarga del firmware en la ramps 1.4
    6 KB (857 words) - 08:18, 14 June 2013
  • RUG/Pennsylvania/State College/Electronics/Flashing tutorial
    <pre>#define EXTRUDERS 1</pre> ...tions are described above this line. If you set the number of extruders to 1, the sensors defined for the other extruders won't be used (you don't need
    8 KB (1,364 words) - 11:12, 27 October 2014
  • ABS HDPE blend
    ...this article. I was talking to a local supplier of plastic welders/rod ($1/foot for ABS (~$900/lb?)... Wow.) Anyways, he mentioned that almost no one ...early much better. the plastics didnt join, but with the PET it took about 1 kilo to seperate the melted surfaces, with HDPE it took 100 grams.
    3 KB (450 words) - 01:17, 23 March 2015
  • HuxleyZAxis
    ** (2) 6mm threaded rod (the las 2 in the set) they are about 215mm or 8-1/2" long ...e, I had to loosen the Motor end clamp and move it away from the center by 1.5mm, I then slid the Z Nut retainer away from the center by the same amount
    11 KB (2,013 words) - 15:06, 25 November 2011
  • HuxleyMotors
    The following 1-page PDF contains the drawing of the plywood opto holder (4 parts).
    11 KB (1,884 words) - 15:06, 25 November 2011
  • EMAKER Huxley
    * Bowden fed extruder for 1.75mm filament {| class="wikitable sortable" border="1"
    5 KB (617 words) - 17:58, 2 April 2016
  • Dynamically expandable Bus Driven Approach
    ...I may decide to include bi-directional comms requiring a 6th pin (unless a 1-wire protocol is employed). Another method to reduce the wiring would be to
    5 KB (911 words) - 13:51, 7 March 2013
  • Syringe Pump Metal Extruder
    1) Heated cup - this is a heated reservoir that contains the molten work mate This is a derivative of the old RepRap Thermoplast Extruder V1.1. The copper part of the nozzle is treated with JB-weld, wound with nichrome
    8 KB (1,270 words) - 14:38, 22 January 2011
  • RUG/Australia/Suppliers
    ...ivative of a J-head design, with nozzles from 0.25mm to 0.5mm, for 3mm and 1.75mm filament, and 12V or 24V setups. Also sell printed herringbone gears t ...striesaustralia.com.au 3dindustries ] )=- genuine makers of the Aluhotend 1.75mm 3mm
    28 KB (4,489 words) - 02:35, 26 May 2020
  • Extruderinsulator
    1/ The top of the insulator is D shaped.
    1 KB (224 words) - 05:18, 17 December 2011
  • Mixtape mendel
    Version 0.1 (Unreleased) 1: 333mm, 333mm, 333mm
    3 KB (456 words) - 21:28, 20 August 2011

View (previous 500 | next 500) (20 | 50 | 100 | 250 | 500)

Retrieved from "https://reprap.org/wiki/Special:Search"